MessageTray._tween sets the state variable to the in-progress value,
so it must be sure that at the end of the animation the value will
be the corresponding final and nothing else will happen in between.
https://bugzilla.gnome.org/show_bug.cgi?id=683986
Since the introduction of overlay hover borders, there has a been
a timing disconnection between hiding the border and button, and
this creates noise and reduces the effect of the window+overlay
as a single unit.
Solve that by animating the close button too, so that the two actors
are shown and hidden always at the same time.
Also, consolidate the code to make it clear to future authors that
those two items need to stay coordinated.
https://bugzilla.gnome.org/show_bug.cgi?id=688966
Turns out that tweener has a very complex logic to decide when a new
tween on the same properties overrides completely the old, and unfortunately
what we were doing was not enough in all cases.
Just be explicit, and don't let anything else mess with the state.
https://bugzilla.gnome.org/show_bug.cgi?id=688895
On additional monitors the workspacesView takes up the entire monitor
and in some cases windows in overview can end up hard against the
edge of the monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=688133
The panel should change appearance according to the sessionMode,
so add a new panelStyle sessionMode property which allows to
specify a mode specific style class for the panel actors.
https://bugzilla.gnome.org/show_bug.cgi?id=684573
The panel corners overlap the panel in order to hide the underline
used for active buttons where it is supposed to arc downwards
following the roundness of the corner.
Unfortunately this prevents us from using a transparent panel background,
as the overlapped area ends up with the wrong transparency. Work around
this limitation by only overlapping the panel if there is a visible
border.
https://bugzilla.gnome.org/show_bug.cgi?id=684573
Commit c3cab28 removed bits setting the password char that was used to
allow typing the password after a failure but before the first question
for the new attempt came.
Without that code, in complex PAM setups you can end up with a visible
password.
https://bugzilla.gnome.org/show_bug.cgi?id=687113
Desktop files can specify if the application should only be shown for
specified desktops with OnlyShowIn and NotShowIn directives options.
If a menu category only contained entries for a different desktop, we
were still creating the category.
We now only add a category button if there is at least one application
to be displayed in this category.
https://bugzilla.gnome.org/show_bug.cgi?id=687970
We need to do a better job of indicating login process. This can
sometimes take a few seconds (particularly if you get your password
wrong): we need to give better feedback of what's going on.
This adds a spinner next to the login button if the authorization takes
some time.
https://bugzilla.gnome.org/show_bug.cgi?id=687113
The login dialog had these issues:
- the entry was not really disabled, you could still edit text
- the sensitivity state was not reset on verification failure
- the session list was not disabled
The unlock dialog had these issues:
- "Login as another user..." was not insensitive
- redundant password char setting, overwriting the one given by the
question
The entry insensitive style was also wrong.
https://bugzilla.gnome.org/show_bug.cgi?id=687113
The "Sign In" button of the login dialog has its look disabled when the
entry is empty, but it can still be triggered by the Enter key.
This fixes the modal dialog so it does not trigger the action of an
insensitive button, and also means we do not need to connect to the
"activate" signal of the entry anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=687113
Make the button layout public for callers to be able to have more
control over like adding custom widgets. Also, the clearButtons and
addButton methods are added as convenience for the most frequent usage.
https://bugzilla.gnome.org/show_bug.cgi?id=687113
Open a modal dialog, try to open the message tray -> no effect, the message
tray is blocked by the dialog.
Close the dialog, try to open the message tray by pointer -> still
no effect, because the old timeout id was not cleared the first time,
so the dwell callback thinks the tray is about to open.
https://bugzilla.gnome.org/show_bug.cgi?id=688750
Windows in the overview should be highlighted when hovered, to indicate
they are an active target.
Based on a patch by Marc Plano-Lesay <marc.planolesay@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=665310
Setting auto-register to true launches the initial registration, and will
afterwards re-launch the agent registration if NetworkManager gets restarted.
When the component is disabled we'll first disable auto-registration, and only
then request to unregister.
https://bugzilla.gnome.org/show_bug.cgi?id=688379
The top panel and message tray icons were by default a gnome foot and
are replaced by better ones. The applications icon is now using the
symbolic apps icon of the dash, and the windows icon is also improved.
https://bugzilla.gnome.org/show_bug.cgi?id=641303
MessageTray tweens both opacity and y to hide or show _notificationWidget,
but only y when expanding it. This means that an existing tween to hide
the notification will continue running, clearing the notification state.
If the hiding one completes before the showing one, the onComplete handler
will throw an exception (because the notification was nullified) and
therefore break the state tracking.
https://bugzilla.gnome.org/show_bug.cgi?id=683986
Instead of adding search providers to the system as we find them, wait
until we loaded information from all the directories, and then add all
providers at once.
This will be useful when we will sort the providers information
according to the sort order saved in GSettings.
https://bugzilla.gnome.org/show_bug.cgi?id=687491
The AnimatedIcon does not have an API for controlling the animation but
relies on the :visible property changes to start and stop a timeout used
to update the frame.
This has the inconvenient of having a side effect when visible is set to
true multiple times, and is not really the API expected from such
component. Also, there is a race if it is displayed before the images
are loaded: there is no child yet and thus we get this._frame = NaN
which leads to a crash.
Switch to a play/stop API instead, and add a load event callback to the
TextureCache.load_slice_image to exactly know when we can start using
the images.
https://bugzilla.gnome.org/show_bug.cgi?id=687583
As we now allow the ctrl-alt-tab popup on the lock screen, it should
be possible to navigate back from the top bar, so add the corresponding
elements to the switcher.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
The original condition the property was based on was added to make
the a11y switcher available in the login screen, though it did never
work properly - after popping up the switcher, additional tab key
presses were ignored. As we are now able to filter bindings much more
selectively, we can simplify the check and drop the sessionMode property.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
With the new flexible system in place, there's no point explicitly
hardcoding some built-in keybindings; just use the generic mechanism
for everything.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
Currently we hardcode the set of keybindings that are available in the
overview; add a generic mechanism to specify in which KeybindingModes
a keybinding should be available.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
For now we just use it to assign an identifier to modal modes in
which we want to allow some keybindings, but we don't use it for
any actual filtering; we'll start doing this shortly.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
We are currently using a hack to allow a select set of keybindings
in the overview. Implement the new MetaPlugin keybinding_filter
hook, which provides a cleaner way to achieve the same.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
Remove section titles for ethernet and mobile broadband, and replace
them with device status items that recognize if multiple devices are
installed in the same section, and if so automatically disambiguate.
https://bugzilla.gnome.org/show_bug.cgi?id=677142
Due to an oversight, the width of the password entry is currently
determined by the length of the message description. Fix the flags
so that the entry spans the entire width of the dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=684810
When updating the dash, we already avoid all animations while the
overview is hidden. However, as we are using Main.queueDeferredWork(),
updates may be deferred up to ~20 seconds while the overview is hidden.
If the overview is entered before a queued update has taken place, it
will be run immediately on map - as the overview is visible by then,
this means animating any outstanding changes.
Work around this by skipping animations during overview transitions as
well.
https://bugzilla.gnome.org/show_bug.cgi?id=686530
If the session mode has no locking support, screenshield had code to
unlock automatically, but it did so by checking the return value of
the constructor, instead of checking if the constructor was actually
callable, so it would get a TypeError before reaching the check.
https://bugzilla.gnome.org/show_bug.cgi?id=687708
At the moment, only the mouse can be used to focus and answer a chat
notification.
This adds a new keybinding (defaults to <Super>+n) to focus and expand
the active notification.
https://bugzilla.gnome.org/show_bug.cgi?id=652082
When in the overview, if you move the mouse cursor over one of the
application launchers in the dash, all the unrelated windows are dimmed
both both in the window view and in the workspace view.
It helps to easily understand whether or not there are already opened
windows for this application, and where they are. It can also help in
differentiating the windows in the overview (sometimes the thumbnails
aren't precise enough to easily know which thumbnail belongs to which
application).
https://bugzilla.gnome.org/show_bug.cgi?id=657315
This has also the benefit of getting the application even if it can not
be retrieved through AppSystem, which can happen if the runtime WMClass
does not match the one of the desktop file.
This especially looked wrong with the following commits related to the
bug.
https://bugzilla.gnome.org/show_bug.cgi?id=657315
We simply hide the label when the popup is opened instead of relying
on the popup state when the hover state change.
To do this we replace the flag isMenuUp by a 'menu-state-changed' signal
on the AppWellIcon. This simplifies the dash label visibility handling
code that need additional changes for the bug.
https://bugzilla.gnome.org/show_bug.cgi?id=657315
Initializing this synchronously means that we will possibly wait for the
process to be auto-activated and answering to our call.
If the process is already running it also might not answer immediately
our request, as it might be doing sync I/O.
The right thing to do is to initialize the proxy asynchronously; there
are try/catch blocks in place for when the object is not available, or
not properly initialized.
https://bugzilla.gnome.org/show_bug.cgi?id=687491
This is called in the main thread, which we should never block for
synchronous I/O.
Since the operation we're wrapping is async already, just use
g_file_query_info_async() instead.
https://bugzilla.gnome.org/show_bug.cgi?id=687491
Remote search providers install an auxiliary keyfile to specify
static information, such as the object path/bus name needed to activate
the binary. Such keyfiles also specify the application the providers
pushes results for; currently, we support two formats for application
information
- two fields, "Title" and "Icon" that specify a (translatable) title and
an icon name for display
- one field "DesktopId" that specifies the desktop file name of the
application backing the provider, which obsoletes the previous
Title/Icon syntax
Since all providers in GNOME use DesktopId now, and we need to ensure a
remote search providers is always backed by an application for future
development, this commit drops the support for the older syntax.
https://bugzilla.gnome.org/show_bug.cgi?id=687491
Switch from a ClutterDragAction to a ClutterGestureAction, that gives
us the velocity of mouse motion at each step, and use it to compute the
animation time for completing the hide gesture.
https://bugzilla.gnome.org/show_bug.cgi?id=682537
The background is the same as the normal desktop, so we blur and
desaturate it to clearly show that it's not the normal system state.
To do so, we don't use standard ClutterEffects, to avoid the FBO
indirection. Instead, we take advantage of MetaBackgroundActor support
for GLSL code and paint the shaded background texture directly.
https://bugzilla.gnome.org/show_bug.cgi?id=682536
After some changes, the tooltip label at the dash is not available
until it is visually shown. As this is not anymore a reliable
source of accessible name, we just set the accessible name
with the string used on that label.
https://bugzilla.gnome.org/show_bug.cgi?id=686583
If we lock before the user becomes active again, gnome-session will never
change presence from IDLE, and thus we'll never hide the lightbox.
Instead, install our own idle monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=687020
Entering the overview with the overlay key is done on key release but
exiting the overview on key press, which is inconsistent.
This change makes the overview hidden also on key release.
https://bugzilla.gnome.org/show_bug.cgi?id=683024
Adding a radial gradent to the dimming effect gives more depth to
the background.
Shading is computed in a GLSL fragment shader, and uses distance to
center of the screen to interpolate the darkening value to use.
Based on a patch by Pierre-Eric Pelloux-Prayer <pelloux@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=669798
The AnimatedIcon does not have an API for controlling the animation but
relies on the :visible property changes to start and stop a timeout used
to update the frame.
This has the inconvenient of having a side effect when visible is set to
true multiple times, and is not really the API expected from such
component.
Switch to a start/stop API instead. Also, update to the first frame at
startup while we are at it, since this is the expected behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=687583
You can't login until something has been entered in the password field.
We should therefore make the login button insensitive until you have
entered some text.
https://bugzilla.gnome.org/show_bug.cgi?id=687112
Notifications that are created in response to direct user actions like
"is ready" or "'foo' has been removed from favorites" should always be
displayed even though the user has marked him/herself busy.
https://bugzilla.gnome.org/show_bug.cgi?id=662900
The barrier was introduced to make the message tray hot corner
usable in multiple monitor setups. With the hot corner gone in
3.6, the pointer barrier doesn't make much sense anymore, so
remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=687457
Instead of keeping track of the old adjustment.upper keep track of the
old adjustment.value that corresponded to the bottom scroll position.
This fixes the integrated chatview not always scrolling to the bottom
by removing the assumption that page_size is constant between updates,
which is not the case as the view is presented in various different ways.
https://bugzilla.gnome.org/show_bug.cgi?id=686571
I've heard quite a bit of feedback from people who want to log out,
even if they are the sole user on their system. It doesn't seem worth
alienating them over this; so add a setting to make the 'Log out' item
always show up.
https://bugzilla.gnome.org/show_bug.cgi?id=686057
While we recreate icons on style changes elsewhere, the faded
icon in the application menu will stick around after icon theme
changes until another application is focused.
https://bugzilla.gnome.org/show_bug.cgi?id=687224
Stop pretending that VPN is a NMDevice, and split the useful bits into
a NMConnectionBased interface.
Make each connection have its own switch menu item and handle its own
status, and remove the VPN section title, which is no longer needed.
https://bugzilla.gnome.org/show_bug.cgi?id=682929
Currently the entry takes the intial key focus, but is not actually
part of the focus chain. Fix that, even though keynav does not work
too well for the dialog anyway, due to the entry consuming tab for
command completion.
https://bugzilla.gnome.org/show_bug.cgi?id=687127
When the user has the entered the password for the second time
and clicked OK, clear messages from the previous attempt, so any
new failure is shown clearly.
https://bugzilla.gnome.org/show_bug.cgi?id=687132
Reposition the window overlay when the title changes, using the current
transformed size of the window clone.
Includes a test that changes title to a string of random length every 3 seconds.
Based on a patch by Alex Hultman <alexhultman@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=620874
While looking at how the plymouth implementation was built, I was so
short-sighted and focused on the string "_XROOTPMAP_ID" that I didn't
realize it was the name of the standard background on the root window.
Remove our own implementation, and switch to using a standard mutter
MetaBackgroundActor.
https://bugzilla.gnome.org/show_bug.cgi?id=682428
Rationale:
- Getting something out of the way should be quick;
- Very few things in the real world move linearly so, linear
animations, especially for something as big and visible as this,
felt too artificial;
- Moving the curtain out should start slower to make it feel like
having weight (it fills the whole screen after all) but quickly
accelerate towards the end to make it snappy too.
https://bugzilla.gnome.org/show_bug.cgi?id=686745
When the summary notification is open when the tray is closed, we end
up with two concurrent animations: the notification fading out, and the
tray moving away from underneath it. Sliding out the tray should be the
primary transition here, so hide the notification immediately to not
draw the user's attention away from it.
https://bugzilla.gnome.org/show_bug.cgi?id=686888
Having the close button move away from under the pointer after
clicking it is confusing and distracts from the main transition,
which is hiding the notification. Just hide it immediately.
https://bugzilla.gnome.org/show_bug.cgi?id=682237
Rather than destroying the entire source, which is unintuitive, simply
close the notification. Removing the entire source is still possible
by right-clicking on the summary item and choosing "Remove".
https://bugzilla.gnome.org/show_bug.cgi?id=682237
GDM has a 'logo' key in its schema to allow distributors to add
some branding. It is currently placed above the user list, which
no longer works too well since the login screen lost its dialog
window. Display the logo in the top-left corner instead of the
Activities button instead.
https://bugzilla.gnome.org/show_bug.cgi?id=685852
Currently close() is a no-op when the menu has already been closed.
However, repeated calls could pass different animation parameters.
For instance in the user menu, we try to hide the menu immediately
before locking the screen, to avoid the popup jumping across the
screen while fading out - as we do this from the corresponding
item's activate handler, the closing is still animated if the menu's
own handler (which requests a full animation) is run first.
Fix this by changing close() to overwrite ongoing animations before
bailing out early.
https://bugzilla.gnome.org/show_bug.cgi?id=686484
Change the layout strategy to be more like the mockups. With less than
two rows of windows, we try to fit every window in a non-aligned situation;
with more than three rows of windows, we try to fit every window in an
aligned situation.
Based heavily on a patch from Pierre-Eric Pelloux-Prayer <pelloux@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=582650
Ouch. This went unnoticed for a long time as by default (using
dynamic workspaces) only one workspace is added at a time, which
happens to work fine.
https://bugzilla.gnome.org/show_bug.cgi?id=686487
Hide workspace switcher if dynamic workspaces is disabled and number of
workspaces is set to one only, since the user is bound to only one workspace
and showing the switcher is redundant.
Signed-off-by: Seif Lotfy <seif@lotfy.com>
The same logic as for commit 1f30670c1d applies to the case
where we lock the screen before suspending - we don't want the
menu to jump to the opposite screen side to fade out, so remove
the animation altogether.
https://bugzilla.gnome.org/show_bug.cgi?id=686484
Due to a typo, it never worked correctly. After a fix-up to the appropriate
method, the behavior is suboptimal, as the buttons only fade in the first time
the modal dialog is constructed. Just remove the fade-in behavior, rather than
keeping this non-working code around.
https://bugzilla.gnome.org/show_bug.cgi?id=677426
This is a workaround for power users for the "Show Apps" button
placement being too inconvenient to press at the bottom of the
dash favorites list.
Unity also uses Super+A to show the Apps lens.
https://bugzilla.gnome.org/show_bug.cgi?id=685738
Currently the label for the show-apps button is only updated during
drag operations, so after an item is successfully dropped on the
button, the label will still read "Remove from Favorites".
Fix this by resetting the label on drag-end.
https://bugzilla.gnome.org/show_bug.cgi?id=684627
If esc is pressed twice in succession in the unlock dialog, the curtain
is cancelled, but the dialog is cleared after the first esc cancels it,
and it's not destroyed and recreated.
https://bugzilla.gnome.org/show_bug.cgi?id=685441
The interface was declared to take an unsigned integer instead
of a boolean, as gnome-screensaver does. Due to this,
gnome-screensaver-command --activate or --deactivate does not
work when used with gnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=686063
The configured calendar application might not actually be installed.
Instead of failing with an error message, hide the menu item altogether
in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=686050
Since panel corners are currently square, this doesn't really affect much,
but it's very clear what the code was supposed to be. At the same time,
also fix up a redeclaration with 'let', which technically isnt' kosher.
If there are either no resident or persistent notifications, we'll
add some spacing for those boxes that may contain nothing. Make them
invisible to remove the spacing for those elements. It's possible
that we may want to be smarter about this in StBoxLayout to remove
spacing for zero-sized actors, but today is not the day.
https://bugzilla.gnome.org/show_bug.cgi?id=685919
Currently when the summary boxpointer is ungrabbed automatically
because the keyboard focus was moved outside the message tray
(for instance by selecting the overview search entry or opening
the right-click menu of a dash item), after the popup is hidden
_updateState() will grab focus and show the popup again.
Work around this by unsetting the clicked summary item when losing
focus to an actor outside the message tray.
https://bugzilla.gnome.org/show_bug.cgi?id=685156
Commit 448517032e added the message tray unconditionally to
the Ctrl-Alt-Tab popup, but while this makes sense for a normal
session, we do not want it in the login screen.
Be a bit more careful where we make the tray available.
https://bugzilla.gnome.org/show_bug.cgi?id=685914
This ensures that the desktop window's smooth fadeout when going to
the overview is in the same spot as the desktop window, which may not
always be at 0, 0.
https://bugzilla.gnome.org/show_bug.cgi?id=681159
Having the tooltip change when it's visible looks strange and glitchy.
This also makes sure that "Remove from Favorites" doesn't change, even
when the user removes their mouse cursor from it.
https://bugzilla.gnome.org/show_bug.cgi?id=685313
The preference controls whether the screen should be locked when
the screensaver is activated, not whether the screen should be
locked at all. In particular after having switched to a different
user, log out should not automatically switch back to the unlocked
session, so always activate the lock when user switching.
https://bugzilla.gnome.org/show_bug.cgi?id=685536
Currently Return is used to activate the default button of a modal
dialog if no key is specified. It makes sense to allow alternatives
as the keypad's Enter key as well in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=685511
GDM does not allow concurrent logins of a single user, so making
'Switch Session' a user switch operation does not work - in order
to choose a different session, users have to log out.
Rather than making 'Switch Session' an alias of 'Log out' (which
is available anyway when multiple sessions are defined), remove
the item altogether - 'Switch Session' suggests an operation that
does not loose state, and we currently favor 'Switch Session' over
'Switch User', so on systems that have both multiple users and
multiple sessions, the latter would become unavailable.
https://bugzilla.gnome.org/show_bug.cgi?id=685062
Content-Type scanning can be super expensive. The autorun manager is meant
for local filesystems that are plugged into a USB port or similar, not
remote NFS or sshfs mounts.
https://bugzilla.gnome.org/show_bug.cgi?id=684093
When Florian landed the new dash container to show the all apps button
always, he got the math wrong -- he forgot to add padding around the
container, and used the height of the box to calculate a y2 position,
rather than the y2 position of the box.
https://bugzilla.gnome.org/show_bug.cgi?id=684619
Currently the visibility of input volume is only updated when a stream
is added/removed - apparently no one noticed until now, as in the normal
user session we get away with this as long as we have some startup sound,
but this is not the case in the lock screen, so we may end up showing
input volume incorrectly.
https://bugzilla.gnome.org/show_bug.cgi?id=684611
The keyboard is shown/hidden automatically when (un)focusing a
ClutterText actor. This behavior is unwanted when opening the
extended keys popup, so focus changes to the popup are ignored.
However, we also want to ignore focus changes from the popup
to avoid the keyboard hiding itself after pressing an extended
key.
https://bugzilla.gnome.org/show_bug.cgi?id=683546
The keyboard is shown/hidden automatically when (un)focusing a
ClutterText actor. This behavior breaks with the message tray now
grabbing/releasing key focus when toggled. Fix this by ignoring
all focus changes to or from the message tray.
https://bugzilla.gnome.org/show_bug.cgi?id=683546
Currently if a summary item signals that it has handled a click
itself, the tray hides itself. This behavior is wrong for the
On-Screen-Keyboard, which appears as a unit with the tray, so add
a property to opt-out of the default behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=683546
GrabHelper automatically releases grabs when the user clicks outside
the grabbed actors. However at least for the message-tray (which is
the only user of grabHelper at the moment), we must ignore any events
from the On-Screen-Keyboard, to prevent the tray from hiding at every
key press.
https://bugzilla.gnome.org/show_bug.cgi?id=683546
This fixes a case of _updateState() being called recursively,
resulting in stray grab()/ungrab() calls the leave the entire
desktop in a stuck focus state.
https://bugzilla.gnome.org/show_bug.cgi?id=683546
The message tray is now modal and pushes the view up, but the keyboard
is shown below it. Solve this by applying a special styling to the
keyboard and message tray combination, and by not pushing the windows
up when the keyboard is shown.
https://bugzilla.gnome.org/show_bug.cgi?id=683546
When changing the user's avatar image, AccountsService will
overwrite the old image with the new one, so the location
returned by get_icon_file() is always the same.
In order to pick up the change, we need to make sure to clear the
previous image from both StTextureCache and StThemeNode's paint
cache.
https://bugzilla.gnome.org/show_bug.cgi?id=679268
With the recent session mode changes, the visibility of settings
items is now only set on sessionMode::updated - while the signal
is emitted when the session mode is initialized, settings items
that are added after that are visible regardless of the allowSettings
setting until the next sessionMode::updated signal is received.
Fix this by explicitly setting the initial visibility of settings
items.
https://bugzilla.gnome.org/show_bug.cgi?id=684473
