Currently the chrome layer decides itself which events on the window
clone should show or hide the chrome, which makes it harder to extent.
Instead, move the decision to the window clone by letting it emit
show/hide-chrome events when appropriate.
https://bugzilla.gnome.org/show_bug.cgi?id=783953
Previews are currently limited to at most 70% of the actual window
size. This was done to indicate more clearly that the overview is
active and the window cannot be interacted with. However since then
other indications like the vignette effect have been added, so
artificially limiting the preview size doesn't look necessary anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=783953
Now that only one window title is visible at any time, it no longer
matters if a title extends into other window previews, so we can
always show the full title.
https://bugzilla.gnome.org/show_bug.cgi?id=783953
While the new title position gives the previews more space, they now
overlay the content which may hide valuable information. Address this
by only revealing the title as additional information on hover, like
we do for other auxiliary elements.
https://bugzilla.gnome.org/show_bug.cgi?id=783953
We consider the window previews the primary way to identify a window,
so it makes sense to give them as much space as possible. So in order
to not have title captions take up too much vertical space, overlay
them on top of the preview borders.
https://bugzilla.gnome.org/show_bug.cgi?id=783953
We currently expand the workspace switcher when workspaces are being
used, that is when there are any windows on a non-active workspace.
While this helps with the switcher's discoverability, it does eat into
the space available for window previews. By now the component should
be well established, so we can afford opting for space efficiency and
only expand the switcher while the user actually interacts with it.
https://bugzilla.gnome.org/show_bug.cgi?id=783953
The overview's window picker is primarily about windows, and as the
previews that represent them are more effective the bigger they are,
it makes sense to scale down competing elements; start by reducing
the size of workspace thumbnails on the right ...
https://bugzilla.gnome.org/show_bug.cgi?id=783953
Instead of potentially loading a background mid-way when it changes, and
loading it again for every file monitor event, leverage
CHANGES_DONE_HINT events, which allow us to ignore CREATED and CHANGED
signals from the file monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=747794
About every other situation can do with synchronizing keyboard visibility,
and keyboard layout changes are already handled internally in the Keyboard
object.
A downside of this approach is that once created, there will always be a
Keyboard instance and its full actor hierarchy. Seems reasonable to do that
since we can't tell it won't ever be needed.
https://bugzilla.gnome.org/show_bug.cgi?id=785309
In case where a method- and property name overlap, using the method
is less unambiguous than I thought - mozjs52-based gjs will only see
the method, while mozjs38-based gjs will only see the property. We
are in luck though, and the real property name contains dashes that
allow us to refer to the property in a way that works for all gjs
versions.
https://bugzilla.gnome.org/show_bug.cgi?id=785090
ClutterActor has both a has_pointer() method and a :has-pointer
property (that we represent as 'has_pointer'). So far gjs was
able to deal with the name overlap, but now trying to use the
property will instead test for the availability of the method.
Just avoid the conflict by switching to the method, which is
unambiguous.
https://bugzilla.gnome.org/show_bug.cgi?id=785090
We now cancel animations on override, however we also want to cancel
animations altogether on unmap (that is, when hiding the overview)
to avoid icons swarming into the void.
https://bugzilla.gnome.org/show_bug.cgi?id=736148
Until now we were waiting the animation to complete to allow the user to
make a new animation. This could bring some problems and annoy nervous
users.
Instead of that, destroy clones on new animations triggers and
create a new animation with the new direction.
https://bugzilla.gnome.org/show_bug.cgi?id=736148
The animation needs the icons' final positions, so we currently defer
it to a ::notify::allocation handler; however as starting the animation
during an allocation cycle would trigger a Clutter warning, it is
further deferred to a MetaLater. While this usually works, it is possible
that the allocation is already valid when we connect the signal, in which
case the animation is triggered at a later unexpected time. Switch to
a more robust ::paint handler instead, which also allows us to get rid
of the double-delay.
https://bugzilla.gnome.org/show_bug.cgi?id=736148
Any symbols (including class properties) that should be visible
outside the module it's defined in need to be defined as global.
For now gjs still allows the access for 'const', but get rid of
the warnings spill now by changing it.
https://bugzilla.gnome.org/show_bug.cgi?id=785084
Symbols that are defined with 'let' are no longer visible outside
the module that defines them. To unbreak the code base, define all
non-private properties as global.
https://bugzilla.gnome.org/show_bug.cgi?id=785084
The first time that the session is started, it can happen that the
AT SPI hasn't been correctly initialized, and this results in a crash
when attempting to register the caret or focus listeners.
In order to avoid this, these changes check the result of initializing
the AT SPI, to allow further attempts when it has failed.
https://bugzilla.gnome.org/show_bug.cgi?id=785047
Customization of keycombo actions for strips/rings was lost in the
porting to new incarnation of Wacom support.
The UI here is slightly different, instead of requiring the user to
rotate/swipe in each direction to map each keycombo, the UI will
navigate the user through edition of both options, first one, then
the other.
https://bugzilla.gnome.org/show_bug.cgi?id=782033
Commit 39a840e2c3 added an additional parameter to shell_app_launch().
When adjusting callers, the parameter was also added accidentally to
calls of the confusingly similar g_app_info_launch() ...
Remove those to fix some warnings.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
The method currently catches errors that occur when calling the
extension's init() method, but throws itself an error if the
expected extension.js file is missing. The former is pointless
if we expect all callers to handle errors themselves anyway, and
we should avoid the latter if we don't - opt for the second option
and handle a missing extension.js file gracefully.
https://bugzilla.gnome.org/show_bug.cgi?id=781728
While we catch errors that occur when calling init(), enable() or
disable(), the import itself can throw an exception, for instance
if the extension imports an unavailable typelib or tries to draw
in a conflicting library.
https://bugzilla.gnome.org/show_bug.cgi?id=781728
Both reloadExtensions() and enableExtensions() are already expected
to catch extension errors. If they don't, this is the bug that
should be fixed instead of catching unhandled exceptions in the
caller.
This reverts commit ff425d1db7.
https://bugzilla.gnome.org/show_bug.cgi?id=781728
Those will go away when we port authentication prompts to the new
MessageDialogContent widget, so pick the style classes from there
and adjust individual properties with more specific rules to re-
produce the existing style.
https://bugzilla.gnome.org/show_bug.cgi?id=784985
A lot of our modal dialogs share a similar structure:
[Icon] Some title
Maybe a subtitle
And sometimes even a body for stuff like
longer descriptions.
A dedicated widget with a common style will allow us to significantly
reduce duplication of both code and CSS.
https://bugzilla.gnome.org/show_bug.cgi?id=784985
This is the basic dialog actor implementation, which will allow us to
use the same implementation on the session-global modal dialogs. The
ModalDialog class now uses it underneath, and so do all users of it.
https://bugzilla.gnome.org/show_bug.cgi?id=762083
let trackChrome accept actors that are not children of chrome actors.
this will be useful for the MetaCloseDialog in gnome-shell, which
is already included in the MetaWindowGroup, but needs to be tracked
as chrome for the dialog to receive pointer events on X11.
https://bugzilla.gnome.org/show_bug.cgi?id=762083
The actor allocation will be invalid on CLUTTER_TOUCH_BEGIN, because
it comes together with a CLUTTER_ENTER event that will recalculate
styles, and queue a relayout in result.
The net result is that on CLUTTER_TOUCH_BEGIN, the relayout has been
already queued, so the slider width comes up as 0, and the value ends
up as 1. Later touch events already happen on a validated actor, so
it is corrected. Still, not fun when modifying the volume slider on a
touchscreen.
Having descriptions with multiple lines will clutter
the view and make it more confusing for the user. Apart
from that, it also makes the search result a lot bigger,
potentially losing general vertical alignment.
https://bugzilla.gnome.org/show_bug.cgi?id=749957
The classes extending the SearchResult can now connect
to the 'terms-changed' signal emitted by the SearchResult
class. This signal enables each object to update its
internal description in order to apply the bold style
onto strings that match the search terms.
https://bugzilla.gnome.org/show_bug.cgi?id=749957
In order to prepare for applying the bold style to the part
of the description that matches the search terms, we need
to listen for the signal that announces the fact that the
search terms have changed. Given the fact that the
SearchResults class is aware of the changes regarding the
search terms, the classes that extent SearchResult need
to have a reference to it in order to listen for the
to-be-implemented 'terms-changed' signal.
https://bugzilla.gnome.org/show_bug.cgi?id=749957
Since results are now much more concise and take up less
space, we can use the 'saved' space to provide the user
with more search results for each provider.
https://bugzilla.gnome.org/show_bug.cgi?id=749957
The current separator uses a gradient effect as a separator
between search results. As the mockups suggest, the gradient
separator is no longer needed, in favor of a more simple one,
which is a thin semitransparent line.
https://bugzilla.gnome.org/show_bug.cgi?id=749957
In order to match the current mockups, the providerIcon
class needed to include both the name of the provider
and the label that informs the user about how many more
search results are available for that specific provider.
The latter replaces the plus sign icon that has been
used so far.
https://bugzilla.gnome.org/show_bug.cgi?id=749957
In order to make gnome-shell search functionality fit on
smaller screens, like those of devices, search results
need to take advantage of more horizontal space so that
any extra space can be used efficiently.
In order to do so, change the layout of the ListSearchResult
class from a vertical one, to a horizontal one and also
decrease the padding of the list-search-result-content css
class.
https://bugzilla.gnome.org/show_bug.cgi?id=749957
If the padOsd is given a nonexistent ring/strip, things would fail
badly later when trying to paint a 0x0 StLabel. Just avoid creating
more ring/strip labels than those known by libwacom.
This is unlikely to happen, but seems better to protect against it.
https://bugzilla.gnome.org/show_bug.cgi?id=782033
The porthole will not be destroyed when the scale factor changed.
That makes workspace thumbnail porthole still wrong size in the first
seeing after the scale factor changed.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
PopupMenu needs special-treatment of certain types of menu items,
which it determines via children's _delegate property. However as
the calendar drop-down is very unmenu-ish, we use regular actors
rather than PopupMenuItems and the missing _delegate property
triggers a warning. Just add it as the bare minimum to make
PopupMenu happy.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
The destroy effect currently relies on a monkey-patched property
added from the map effect. However on X11 it is possible that we
did no map animation for a window that is destroyed when the shell
was restarted or had taken over from another WM. Just use the real
MetaWindow property to avoid a warning in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
It's possible for updateRegions() to be called before monitors have
been properly initialized. Instead of throwing an error in that case,
just skip the strut computation (that doesn't make sense anyway without
a monitor).
https://bugzilla.gnome.org/show_bug.cgi?id=781471
findMonitorForActor() may be called before the layoutManager gets
to initialize monitors, so make sure the monitor index is in range
to avoid a warning.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
We need to track the open-status of indicator menus, but don't want
to hook up signals more than once, so we check for the handler ID
we store on the object. As the property is only defined once we did
set up the signal connection, this check now logs a warning. We
can avoid it by checking for the existence of the property rather
than a particular value.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
To avoid recreating the app menu unnecessarily, the panel checks
whether the menu's current actionGroup already matches the target
one. However as the menu's actionGroup property is currently private,
the test always fails, whoops.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
We currently use "array[index]" to test whether an array has an
element at index before using it. However nowadays gjs warns about
accessing non-existent array elements, so the test itself already
produces a warning. Avoid this by checking the array length before
using an index to access an element.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
While we've always considered it good style to initialize JS properties,
some code that relies on uninitialized properties having an implicit
value of 'undefined' has slipped in over time. The updated SpiderMonkey
version used by gjs now warns when accessing those properties, so we
should make sure that they are properly initialized to avoid log spam,
even though all warnings addressed here occur in conditionals that
produce the correct result with 'undefined'.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
It is possible to use the scroll wheel to adjust the volume without
opening the system menu, but there is no feedback other than the
icon itself in that case. To provide a less coarse indication for
the volume level, display the OSD window when adjusting the volume
while the slider isn't visible.
https://bugzilla.gnome.org/show_bug.cgi?id=781028
Since commit 2c070d38, we add a ClickAction to the visible AltSwitcher
button to track long-presses. As a result, we now have two components
that will grab and ungrab the pointer for the button, so to make sure
we don't end up with a stuck grab, we need to release the second's
component grab when the first activates.
Currently we only drop the StButton grab on long-press, we also need
to cancel any initiated long-press on click.
https://bugzilla.gnome.org/show_bug.cgi?id=781738
We currently assume that window state changes are accompanied by an
allocation change (triggered for example by the minimize animation).
However this misses the case where a window actor is simply hidden
without any transition, as is the case with the 'show-desktop' action
for instance, so start tracking plain visibility changes as well.
https://bugzilla.gnome.org/show_bug.cgi?id=783975
There were some source IDs that were not being reset to zero when
removing the associated sources, resulting on some critical errors
being dumped when _realRecalculateWindowPositions() got called
after that point, via _delayedWindowRepositioning().
This effect will only be created when the StScrollView actor has either
a non-zero vertical or horizontal fade offset defined, so we need to
add a null-check in these two cases before assuming it's there.
https://bugzilla.gnome.org/show_bug.cgi?id=783823
The .solid style isn't supposed to apply for modes that don't support
windows, but for this to work we have to update the style on session
mode changes.
https://bugzilla.gnome.org/show_bug.cgi?id=783202
Commit b929320d4 added a toolbar item to force garbage collection,
however it won't be visible for most users, as it uses a non-standard
legacy icon name (the default icon theme dropped it as far back as 2009).
https://bugzilla.gnome.org/show_bug.cgi?id=782982
The fullscreen animation code is now generic enough to handle any
size change animations, so stop limiting it to (un)fullscreen to
get animations on (un)maximize as well.
https://bugzilla.gnome.org/show_bug.cgi?id=766685
Currently, the translation values are set with the assumption that
one of the actors represents a fullscreen window. In order to
generalize it for any size change transition, we can simply swap
the monitor rect with the source or target rect as appropriate,
and translate the actor from the target to the source position by
subtracting the former and adding the latter.
https://bugzilla.gnome.org/show_bug.cgi?id=766685
Since there is already targetRect that represents where the
window is going to move, rename oldRect to sourceRect to
represent from where the window is moving.
https://bugzilla.gnome.org/show_bug.cgi?id=766685
If the popup happens to be mapped beneath the pointer, mutter will now
emit an implicit enter notify event (i.e. not caused by pointer motion).
In this case the switcherPopup still goes and selects the item, which
results in too sensitive alt-tab menus if the pointer happens to be in
the wrong place.
Make highlighting rely on motion events instead, so it always involves
user interaction when triggered by the pointer.
https://bugzilla.gnome.org/show_bug.cgi?id=755164
The solid black top bar we currently use works well for maximized
or tiled windows, as it puts focus on the application content by
blending into the monitor bezel. However it also visually reduces
the screen space, which is particularly noticeable when no window
is located nearby. Having the top bar blend with the background is
a better option in that case, so track window positions and add
some transparency when the top bar is free-floating.
https://bugzilla.gnome.org/show_bug.cgi?id=747163
And merge with the "internal" show/hide() ones. Those functions don't
proxy dbus method calls anymore, so it makes no sense to expose these.
Also, the timestamp is no longer needed as there is a single source for
these events.
https://bugzilla.gnome.org/show_bug.cgi?id=777342
The caribou daemon only gives us focus tracking, which is almost 1:1 with
our own FocusCaretTracker implementation. This means we can entirely
replace the Caribou daemon inside gnome-shell, reducing the Caribou
dependency to just libcaribou, and more specifically the
CaribouKeyboardModel we pull the keyboard models from.
As we still need underneath a CaribouDisplayAdapter to drive the keyboard,
reuse the wayland one, which has been renamed to make it look generic, plus
it will use the virtual input device API from mutter/clutter.
https://bugzilla.gnome.org/show_bug.cgi?id=777342
Some search providers such as GNOME Characters want to copy search
results to clipboard. However, on Wayland, clipboards are only
accessible from applications that have a visible surface on display.
This patch allows a search provider to request the shell to copy a
search result to clipboard when 'clipboardText' is included in the meta
of the result.
https://bugzilla.gnome.org/show_bug.cgi?id=775099
We are moving the icon to be added before the text instead of after,
which is consistent with other menu items in other popup menus, such
as the ones in the system indicator's popup menu.
https://bugzilla.gnome.org/show_bug.cgi?id=782166
This allows passing an optional icon parameter to addAction()
so that a PopupImageMenuItem instance is created instead of a
PopupMenuItem if an icon is specified.
https://bugzilla.gnome.org/show_bug.cgi?id=782166
Add an extra check to setIcon() so that either a GIcon or an string
with the icon's name is handlded, so that we can create menu items
in different ways (e.g. by passing a GIcon created from a resource).
https://bugzilla.gnome.org/show_bug.cgi?id=782166
Some extensions out there may fail to reload. When that happens,
we need to catch any exceptions so that we don't leave things in
a broken state that could lead to leaving extensions enabled in
the screen shield.
https://bugzilla.gnome.org/show_bug.cgi?id=781728
Recently Music gained a flatpak manifest inside the repo in bug 779905.
However that requires the desktop file to be properly named like
DBUS addresses are.
This patch renames the old Music desktop file to the new one.
https://bugzilla.gnome.org/show_bug.cgi?id=780157
Add a new D-Bus method for setting the monitor labels. This new method
takes connector names instead of output ids for associating with actual
monitors.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Since the workarea and margins are both in pysical pixels dimensions (we
fetch margins from Clutter, not from the theme), but the CSS expects
logical (scaled) pixels, unless we consider the scale factor when
setting max-height, it won't work on a HiDpi display.
This fixes missing scrollbars when the calendar popup is full on HiDpi
displays.
https://bugzilla.gnome.org/show_bug.cgi?id=753305
Generalizing menu toggling via keyboard in commit 1d58ea25ab
fixed keynav in many places, but it turns out that it also adds
unexpected interactions in some cases where the source is not
button-like, as for example the entry context menus provided by
ShellEntry. Commit e33c68a415 fixed one case, however it is still
possible for plain enter/space to unexpectedly trigger the menu
if the entry itself doesn't consume the event, which is the case
when ClutterText:editable is false. However for a general fix, it
makes more sense to consider the source actor's :reactive property
and disable toggling menus via keyboard when they cannot be toggled
by pointer either - expecting non-editable entries to be non-reactive
as well seems like a reasonable assumption, and indeed all our code
follows that pattern.
https://bugzilla.gnome.org/show_bug.cgi?id=758873
It doesn't make sense to tie the proxy code for flatpak's permission
store to the location indicator, just because that was the first
component to use it, so split it into a separate module.
https://bugzilla.gnome.org/show_bug.cgi?id=780252
Setting GWeatherInfo:location to null helpfully doesn't mean
"no location", but "NYC". This obviously isn't what we want
to show users, so track the location validity separately and
consider it when updating the label shown to users.
https://bugzilla.gnome.org/show_bug.cgi?id=780252
When using the 'disable-lock-screen' setting to lock down the screen
lock, the expectation is that users cannot lock the screen. However
as it turns out, all the setting currently does is hiding the lock
button in the system menu and making the lock settings in the privacy
panel inactive. That means that if the 'lock-screen-enabled' setting
isn't disabled and locked down as well, we will just continue to
lock the screen on inactivity - not to mention the keyboard shortcut
that isn't subject to that setting anyway.
Instead of expecting administrators to hunt down every possible way
of locking the screen and disabling it individually, we can easily
handle all cases by refusing to lock the screen when disabled by the
lockdown settings.
https://bugzilla.gnome.org/show_bug.cgi?id=780212
Dragging and dropping app icons is expected to work anywhere over a
workspace, however overlaid elements are added to a separate hierarchy
and can thus block valid drop targets. This wasn't much of an issue
while we had just the window title, but since the addition of the
focus border, drops on window previews stopped working entirely.
Fix this by hiding all non-reactive overlay elements from picks.
https://bugzilla.gnome.org/show_bug.cgi?id=737166
Currently when the wifi selection dialog is open when the screen lock is
activated, the dialog remains visible above the shield. This is clearly
broken, so close the dialog automatically on session mode changes if the
mode doesn't allow settings (as changing the access point is arguably a
user setting).
https://bugzilla.gnome.org/show_bug.cgi?id=780054
The critical hint is meant to be used for notifications that must not
be missed - running out of battery being the prime example - so it
makes sense to ignore the policy in that case and make sure to always
show them to the user. This is consistent with blocking normal
notifications while showing a fullscreen window, but letting critical
ones through.
https://bugzilla.gnome.org/show_bug.cgi?id=779974
Whenever there's more than one pad in the same group (eg. Wacom ExpressKey
Remotes), show a popdown menu to allow configuring those extra pads.
Devices are hot-pluggable, so the popdown menu will update its state
whenever pads are added/removed.
Also, allow to quickly change between pads by switching to its OSD by
just interacting with them. Always given they are in the same group.
https://bugzilla.gnome.org/show_bug.cgi?id=779986
Telepathy's role has been diminishing continuously over the last
couple of years, so while chat integration is a nice feature for
those who use it, it is hard to justify keeping it as a hard
dependency. To address this, split out the component from the
client so we can handle missing typelibs gracefully by not
providing any chat integration.
https://bugzilla.gnome.org/show_bug.cgi?id=779878
For most notifications, banners are suppressed while the monitor
that is used to display banners is in fullscreen. With the old
message tray at the bottom, this used to be the bottom-most monitor,
but nowadays it's always the primary one, so update the corresponding
code to use the correct monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=779819
The telepathy integration was written at a time where gjs didn't
allow to inherit from GObject classes, which is why we needed a
C helper class. This hasn't been the case for a while now, so cut
out the middle man and implement Tp.BaseClient directly.
https://bugzilla.gnome.org/show_bug.cgi?id=771721
Rename the signals which have been used to handle XDnd events to more inclusive
ones. So that these signals can be used to handle the DnD events in Wayland.
https://bugzilla.gnome.org/show_bug.cgi?id=765003
Commit c6f22826cf added a call to update() to refresh the notification
time for sent and received messages. However as it omits the bannerMarkup
parameter, escaped text like ''' now makes it through verbatim.
Rather than adding the parameter, we can just refresh the timestamp in
the existing update() call to fix the issue - it means the notification
timestamp is only refreshed for received messages, but that reflects
the text shown in the notification, which isn't updated for sent
messages either.
https://bugzilla.gnome.org/show_bug.cgi?id=779435
Media notifications currently always show the forward and backward
buttons as clickable, regardless of whether the corresponding action
is available or not. Media players usually address this by rendering
controls insensitive in this case, so do the same here.
https://bugzilla.gnome.org/show_bug.cgi?id=773884
Without the boxy background, event messages look a bit plain and
unaligned with other messages. Adding an icon addresses this,
however as repeating the same icon over and over again in case of
many events would be rather noisy, only show it for the top event
as in the mockups.
https://bugzilla.gnome.org/show_bug.cgi?id=775763
Update the notification style according to the latest mockups:
- make notification icons smaller and prefer symbolic variants
- remove background box when not hovered/focused
- increase spacing between elements
- use normal text sizes
https://bugzilla.gnome.org/show_bug.cgi?id=775763
For notifications in the message list, it is usually less relevant
when exactly it occurred, but how long ago. So rather than showing
the exact time and expecting the user to figuring out the timespan
themselves, change the format to something human readable.
https://bugzilla.gnome.org/show_bug.cgi?id=775763
Currently the secondary actor (if set) and the close button are
exclusive, that is the latter replaces the former on hover. As
the swapping feels rather busy and there's no real reason both
cannot be shown at the same time, keep the secondary actor always
visible.
A welcome side effect is that it no longer needs to be placed at
the end, so we can move the notification timestamp right next to
the corresponding title.
https://bugzilla.gnome.org/show_bug.cgi?id=775763
The section titles usually don't provide a lot of value - messages
themselves are usually pretty unambiguous about their type, and
having a hidden shortcut to some settings panel or application isn't
essential either - except when showing the selected date when browsing
other days, as it adds context to the listed events. Based on that,
remove the section title as a general MessageListSection feature and
move it into the EventsSection, where we only show it when it is useful.
https://bugzilla.gnome.org/show_bug.cgi?id=775763
We will eventually remove section titles from the message list to
reduce visual noise and give the actual information provided by
the messages more space. So in order to not lose the ability to
mass-dismiss messages, the latest mockups spot a "Clear All" button
at the bottom - implement that.
https://bugzilla.gnome.org/show_bug.cgi?id=775763
The latest mockups contain a button to clear all sections at once.
As some elements cannot be cleared, we need to provide that information
to avoid offering an action that has no effect.
https://bugzilla.gnome.org/show_bug.cgi?id=775763
Similar to the Clocks integration we've had in the date+time drop-down for
a while, the designs have called for a similar section that integrates
GNOME weather as well. Use the WeatherClient added in the previous commit
to implement that section and add it to the popover.
https://bugzilla.gnome.org/show_bug.cgi?id=754031
In order to avoid distracting popup size changes while browsing
other dates, we freeze the size to the last size request. However
in case of more complex size negotiations - wrapping or ellipsizing
labels, scrollable elements etc. - there's a chance of stray calls
to get_preferred_width/height() that are not used for the actual
allocation. If such a call happens to be the last size request
before the layout is frozen, the saved size will be wrong. To fix
this, save the allocated size rather than the requested one.
https://bugzilla.gnome.org/show_bug.cgi?id=754031
We want the width of the calendar column to be determined by the
calendar, other elements should adjust their allocation accordingly.
However neither ellipsization nor wrapping will kick in unless the
parent's width is restricted, so use a small custom layout manager
that enforces the desired behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=754031
As the telepathy integration picks up existing channels on startup,
ChatNotifications are another case where the real time the message
was received may be before the time it is picked up by the shell.
While this is less of an annoyance than restored GNotifications, as
it generally only affects restarts from the run dialog, it's an
easy fix now ...
https://bugzilla.gnome.org/show_bug.cgi?id=775799
GNotifications are persistent until dismissed or withdrawn, including
across restarts. As we show the time a notification was received in the
calendar, we need to include that information when serializing the
notification in order to be correct.
https://bugzilla.gnome.org/show_bug.cgi?id=775799
Since the last notification redesign, we've been showing the time a
notification was received in the calendar drop-down. However as the
time is in fact added by the NotificationSection, it is actually the
time a notification was added to the list. Usually that difference is
not significant, except when previously received notifications are
restored on startup.
In order to be able to address those cases, we need a time that is
associated with the notification itself, so add a datetime property
that defaults to the current time, but may be set from an optional
parameter as well.
https://bugzilla.gnome.org/show_bug.cgi?id=775799
When gnome-clocks is installed, there is currently a race between the
GSettings schema being added to the database and the world clocks
session trying to use it. The prize if we win that race is an abort
in GIO, so use the newly added AppSettingsMonitor skip the race
altogether.
https://bugzilla.gnome.org/show_bug.cgi?id=766410
The display configuration now exposes a setting to automatically
shift the display color at nighttime. As there are cases where
disabling the filtering temporarily is useful, it makes sense to
expose the feature in the system menu for quick access.
https://bugzilla.gnome.org/show_bug.cgi?id=741224
When gnome-shell fails to start on login, gnome-session tries to
re-launch it again with all extensions disabled. This is currently
implemented by clearing the list of enabled extensions, which means
the user needs to re-enable their extensions manually again.
To make this process less annoying, add a single 'kill-switch' setting
gnome-session can use without interfering with the user setting.
https://bugzilla.gnome.org/show_bug.cgi?id=778664
On systems that support both shutdown and suspend, the latter operation
is currently only accessible via pressing the Alt key. As using the
keyboard may be inconvenient or simply not possible (e.g. on touch),
allow switching between alternatives via long-press as well.
https://bugzilla.gnome.org/show_bug.cgi?id=721173
We currently assume that if a .desktop file has been renamed (that
is, it is in our rename list), the updated ID will be used. That
assumption was mostly sound when the list contained only GNOME apps
following the same release cycle as gnome-shell, but as applications
with less ties to the GNOME schedule adopt the reverse DNS notation,
it becomes more likely for apps to appear in the list before actually
being updated on the system. Handle this case by only renaming IDs
for which the replacement can be resolved to an existing application.
https://bugzilla.gnome.org/show_bug.cgi?id=745626
The permissions hash is initialized after consulting the permission
store, however the lookup is skipped for requests that cannot be
resolved to an application, resulting in an error when accessing
the uninitialized hash for saving. Just make sure that the property
is always initialized to avoid that error.
https://bugzilla.gnome.org/show_bug.cgi?id=778661
GJS implements a basic signal system that allows monkey-patching
JS objects with signal methods resembling the GObject ones. However
it's clearly not a good idea to replace the actual GObject methods,
so use the proper GObject facilities when inheriting from GObject.
https://bugzilla.gnome.org/show_bug.cgi?id=778660
Items were inserted correctly but the synchronisation was lost if the
name of a connection was changed. Simply making sure the position is
correct after a connection is updated fixes the issue.
Reported-by: Oliver Haessler <ohaessle@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=778686
Mutter now provides versioned libraries and pkg-config files, meaning
an application using libmutter and friends need to depend on a specific
version of the API.
https://bugzilla.gnome.org/show_bug.cgi?id=777317
The following code is a syntax error in ES6:
let a = 'something';
let a = 'other thing';
Previously GJS would silently accept this code, but in the next release the
SpiderMonkey JS engine will be more ES6-compliant.
https://bugzilla.gnome.org/show_bug.cgi?id=778425
Using a MetaWindowActor's shaped texture as the source for window
clones means that if there are further MetaSurfaceActor children
(e.g. a wayland client using sub-surfaces) they don't get cloned.
This obviously wasn't an issue until wayland clients introduced the
possibility of having multiple MetaSurfaceActors under a
MetaWindowActor but there's no fundamental reason we can't clone the
toplevel actor.
WorkspaceThumbnail.WindowClone is the one class that was already using
the MetaWindowActor instead of the texture although it seems to have
been an unintended change in commit
8b99617513.
https://bugzilla.gnome.org/show_bug.cgi?id=756715
We have no guarantees on the number of ::size-changed signals that we may
receive, so the _sizeChangedWindow handler may run multiple times, which
leads to multiple calls to meta_plugin_size_change_completed(). So double
check the actor is not already being animated in the _sizeChangedWindow
handler to avoid reentrancy.
https://bugzilla.gnome.org/show_bug.cgi?id=777784
If the call to settings.get_connection_by_path in
ensureActiveConnectionProps returns null, we'll hit a JS error here.
Seems to happen always when activating a VPN connection. Avoid that.
Giovanni says:
"I believe this is papering over an existing bug, but it's possible for
settings.get_connection_by_path() to legitimately return null (if the
connection is owned by a different user and invisible to the current
one), so the fix is correct anyway."
https://bugzilla.gnome.org/show_bug.cgi?id=759793
When a GNotification has the same ID as a previous one, it should
be shown as a new notification after withdrawing the old one.
However for this to work, we must not destroy the corresponding
source if withdrawing the old notification lets the notification
count drop to zero, so make sure the source is kept alive until
the replace operation has completed.
https://bugzilla.gnome.org/show_bug.cgi?id=775149
Clicking on calendar notifications might block till the DBus request times
out if the application being poked happens to be non-responsive. Perform
this asynchronously so we don't block if that is the case.
If an onComplete handler is passed to animate(), it is set to run at
the end of the animation via the icon grid's ::animation-done signal.
Currently the signal is connected after starting the animation, with
the result that the handler doesn't run when the animation completes
immediately (because there are no icons to animate). Fix this by only
starting the animation after connecting the signal.
https://bugzilla.gnome.org/show_bug.cgi?id=774381
We currently assume that the current view matches the 'app-picker-view'
setting. While that is usually the case, there is one notable exception:
While there isn't sufficient usage data (yet), we show all applications
instead of an empty frequent view regardless of the setting. We should
animate the actually visible icons in that case, not the (non-existent)
ones from the hidden frequent view.
https://bugzilla.gnome.org/show_bug.cgi?id=774381
Wayland clients can request their surfaces to be fullscreened before
commiting a buffer which means that we need to handle fullscreen
requests for which the old size is 0x0, preferably without warnings.
Since the mapping animation also runs for these windows, we can simply
bail out and ignore the fullscreen size change.
https://bugzilla.gnome.org/show_bug.cgi?id=770345
Wayland clients are in control of their window size so the existing
mutter plugin API, which assumes size changes are synchronous, doesn't
work for them since when our size-change handler runs the MetaWindow's
size isn't final yet.
To fix this, the mutter plugin API was extended with a size-changed
vfunc that lets us know when the MetaWindow size has actually
changed. This way we can make the window snapshot and get the old
window size on the existing size-change handler and later, on the new
size-changed handler, get the new size and start the animation.
https://bugzilla.gnome.org/show_bug.cgi?id=770345
Our animation code not only relies on the animation being loaded
(which we handle), but also on having at least one frame - otherwise
the computation of the next frame index will turn up NaN through
division by zero. Guard against this case by treating empty animations
as not loaded.
https://bugzilla.gnome.org/show_bug.cgi?id=774805
The top bar's network menu only supports a subset of device types
supported by NetworkManager. While not having lesser used options
in the menu itself is perfectly reasonable, not showing any network
icon at all in the top bar when the system is fully connected is
weird.
https://bugzilla.gnome.org/show_bug.cgi?id=773890
Any network devices appear as top level items in the system status
menu, so on system with an unusually high number of devices, the
menu can end up exceeding the available screen height. While this
is a corner case, leaving important system actions unreachable is
bad. The system menu does not lend itself to scrolling, so handle
this case instead by summarizing sections ("n connections") where
the number of devices exceeds a threshold.
https://bugzilla.gnome.org/show_bug.cgi?id=773892
Currently the cache is built once when the first VPN request is
handled, so plugins that are installed or uninstalled after that
aren't picked up. Fix this by invalidating the cache on changes
to the plugin directory.
https://bugzilla.gnome.org/show_bug.cgi?id=773893
commit 1d58ea25ab changed the
popupMenu code to handle key presses on source actors directly.
This fixed keynav into the session gear menu at the login screen.
Unfortunately, it also causes spurious pop ups if a modifier happens
to be held down.
This commit checks for modifiers and short circuits the up front
key handling if any are found.
https://bugzilla.gnome.org/show_bug.cgi?id=740043
This is an implementation of the pad OSD that's been previously
present in gnome-settings-daemon. Since things are moving closer
to the compositor, it makes sense to have this implemented as shell
UI.
https://bugzilla.gnome.org/show_bug.cgi?id=771067
The lightboxes used for screen blanking are created during initialization
and shown each time the screen should blank. During the (potentially long)
time where the lightbox is hidden, any actor could be raised above the
lightbox - in particular any popup menu raises itself to the top when
opened. To not exclude those elements from screen blanking, raise the
lightbox every time it is shown.
https://bugzilla.gnome.org/show_bug.cgi?id=773875
We currently reload animated backgrounds on timezone changes, but
there are other cases where the time can change unexpectedly and
the background no longer matches the time of day. One case we can
easily handle is when coming back from suspend, so do that.
https://bugzilla.gnome.org/show_bug.cgi?id=773265
Since commit 67615a0cbc, any printable key can be used to lift the
screen shield rather than just escape/enter/space. While this is
convenient for unlocking where the input is forwarded to the password
entry, it is potentially dangerous when the screen is inactive but
not locked: If the user types her password, the first character will
lift the shield and the remaining input will go to the focused window.
To prevent this from happening, only allow printable keys when the
screen is actually locked and restrict the key presses that lift the
shield to the original set of escape/enter/space otherwise.
https://bugzilla.gnome.org/show_bug.cgi?id=773328
It will only show up when a discrete GPU is available (detected through
the switcheroo-control D-Bus service), and the application hasn't
alreayd been launched.
Note that this will not currently work for D-Bus activated applications,
eg. the menu item will be available, but the environment variable will
not be passed through to D-Bus to use when launching the application.
https://bugzilla.gnome.org/show_bug.cgi?id=773117
And adapt existing callers to the new API. This will allow us to
implement a way to launch applications on the discrete GPU for systems
where an "Optimus" system exists.
https://bugzilla.gnome.org/show_bug.cgi?id=773117
If Bluetooth is on but there aren't connected devices, the status in the
menu reads "Not in Use". This is potentially confusing: it's a negative
statement, even though Bluetooth is on. It also sits uneasily (and looks
even more confusing) next to the submenu item "Turn Off".
Changing the string to "On" is better.
https://bugzilla.gnome.org/show_bug.cgi?id=756432
This allows us to pass metadata fields besides the message
to log. So, if the log() call is made from an extension,
pass the extension name and UUID to the logger.
This is useful for extension developers to debug their code
as well as to instruct their users to send debug info to them
by running something like this:
journalctl GNOME_SHELL_EXTENSION_UUID=<extension@uuid>
https://bugzilla.gnome.org/show_bug.cgi?id=770717
NM upstream would like to reduce periodic scanning, and that means
that clients should request scans themselves while their WiFi list
is open. Similar to the Windows and macOS WiFi dialogs/lists.
https://bugzilla.gnome.org/show_bug.cgi?id=767918
We currently rely on the "monitors-changed" signal of LayoutManager to
relayout the OSD window. That is not enough, since the scale factor also
changes the way the OSD window is sized, and that can be updated after
"monitors-changed" has been received.
The visual effect is that under some circumstances, the OSD window will
have the wrong size under HiDpi.
This commit fixes the issue by triggering another relayout when the
scale factor changes.
https://bugzilla.gnome.org/show_bug.cgi?id=772723
Similar to bug 667552 for the app switcher, attached modal dialogs
can result in an unexpected window order in the window switcher:
Selecting a window with an attached dialog will focus the dialog
instead, but as the dialog itself is ignored in the window list,
its last-used timestamp is not taken into account for the position
in the MRU list. Fix this by fetching the list of all NORMAL windows
and filter out skip-taskbar windows ourselves, while making sure that
windows appear in the position of their attached modal dialog where
appropriate.
https://bugzilla.gnome.org/show_bug.cgi?id=747153
We only connect to the corresponding property notifications after both
Client and RemoteSettings are ready, so we may miss the initial signal
emission. Make sure to pick up the connections in this case to fix the
network indicator not showing up.
https://bugzilla.gnome.org/show_bug.cgi?id=772249
Similar to windows on another workspace, selecting a minimized window
doesn't look quite right - the selected window disappears, then animates
back in. Fix this by adding support for skipping the next effect to the
wm and use it to bypass the unminimize animation.
https://bugzilla.gnome.org/show_bug.cgi?id=771536
Both 'cycle-group' and 'cycle-window' shortcuts allow cycling through
windows on all workspaces. While this works, it looks quite broken
since we started showing clones for highlighting: the selected window
vanishes (when its clone is destroyed), then slides back in with its
workspace. Instead, slide the selected window to its workspace like
we do for the 'move-to-workspace-*' shortcuts.
https://bugzilla.gnome.org/show_bug.cgi?id=771536
Commit 3171819c improved window cycling by using a dedicated to clone
for highlighting rather than activating all cycled windows. Original
window actors are hidden while its clone is showing, and shown again
afterwards, however the latter is wrong for actors that are not supposed
to be visible (for example where the window is minimized, or on a different
workspace). Fix this by properly syncing the actor's visibility instead
of showing it unconditionally.
https://bugzilla.gnome.org/show_bug.cgi?id=771536
Since commit 82950ecea, we acknowledge pending messages when closing a
chat notification for a channel we are handling to prevent the channel
from popping up again immediately. While this isn't an issue for channels
we don't handle, the unread messages of the destroyed notification are
still considered for the messages indicator in the top bar, which is
clearly confusing (in particular when we end up showing the indicator
without any notifications in the list). As it's arguably correct to not
meddle with a channel handled by someone else, just reset the cache of
pending messages to address this issue.
https://bugzilla.gnome.org/show_bug.cgi?id=770888
Mutter's plugin destroy event doesn't happen if a window is hidden
when it gets unmanaged so we also need to handle the
MetaWindow::unmanaged signal to check whether the parent should
dimmed.
https://bugzilla.gnome.org/show_bug.cgi?id=752524
