While the gsetting is available for all who needs it, the Shell might
override it given various hueristics. Expose the decision made by the
Shell via a new property.
Intended to be used by gsd-xsettings as well as xdg-desktop-portal-gtk.
This also add a version property to the API, so that semi external
services (xdg-desktop-portal-gtk) can detect what API is expected to be
present.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/757
For reasons not yet fully understood, `Main.uiGroup.add_actor` takes around
10 milliseconds to complete.
Because of this, each `actor.opacity = 0` has a good chance of falling
on a different frame. And when it does, `_opacityChangedId` also lands
on multiple different frames each incurring a separate relayout cycle.
It is this excessive number of relayouts that causes stuttering in the
icon grid animation (#2065). But it is the slowness of `uiGroup.add_actor`
that causes the number to be excessive when it should be one.
By creating the clones and adding them to `uiGroup` early, we then enable
the existing loop starting the animation to complete within a single frame.
And by completing within a single frame all the opacity changes land within
the same frame interval, thus incurring only a single relayout instead of
many.
This issue went unnoticed until 004a5e1042 (!704), after which the slow
emissions of `notify::opacity` became a more visible performance problem.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/2065https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1002
Now that the bind constraint changes the preferred size of
the actor, a major flaw in the AppDisplay code was exposed:
the folder dialog depends on the preferred size of a parent,
and the parent depends on the preferred size of the folder
dialog.
While we know this is not actually true, we shouldn't rely
on broken behavior to achieve this result. What's interesting
is that the bind constraint used by the folder dialog is a
relic of the development phase; we now control the position
and size of the dialog with a combination of CSS, and alignment.
Remove the unnecessary bind constraint.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1027
Since the design of the notification popup changed with the theme
refactor and there are now boxes around the world-clock and weather
sections, the overlay scrollbar that is shown above them looks rather
bad. So simply hide that scrollbar, we still have the vfade effect to
indicate the container is scrollable and we also depend on that in the
new popup app-folders.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1013
Make sure the stylesheet properties of the window-chrome title are
updated before requesting the preferred width of the title to prevent
size changes of the title after we animated the width.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/58
Remove the default icon size of -1 and always set the container StBin to
a real size. This fixes an error where the "width" and "height"
properties get set to -2 (which is -1 * scaleFactor) in the `_init`
function.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1018
To make sure the GC really disposes the KeyboardController object we
need to remove all references to the object, which means we have to
disconnect signals the object connects to, too.
This also fixes a bug where keys remain pressed forever and thus also
break that key on real keyboards. It happens if the OSK gets destroyed
during an OSK-key is being held so the StButton of the key is not
released. That means the key remains pressed in the
MetaVirtualInputDevice that we are now leaking because
KeyboardController isn't garbage collected.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1015
xgettext gained some support for template strings, and no longer
fails when encountering '/' somewhere between backticks.
Unfortunately its support is still buggy as hell, and it is now
silently dropping translatable strings, yay. I hate making the
code worse, but until xgettext really gets its shit together,
the only viable way forward seems to be to not use template
strings in any files listed in POTFILES.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1014
Since quite a few strings of dialogs provided by external programs are
not updated yet and the string freeze is already in effect, make sure we
don't break those dialogs by stripping aways large parts of the
headline.
To do that, detect if the title label is larger than the available width
and if it is, switch to a smaller font-size of 13pt. This makes sure we
still show about the same number of characters in the headline as we did
in previous releases.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1012
With the old screen shield, we were simply hiding the lightboxes to show
the shield when the user became active after activating the shield but
before locking the screen (that is, when using a lock-delay).
However now that the shield is gone, we end up showing the unlock dialog
even though we are not actually locked.
We probably don't want to add back a shield-like mode (that is, a way to
raise the unlock dialog without authentication when we aren't locked),
so just deactivate the whole shield when the user becomes active again
before the lock kicks in.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2213
The design team discussed the ellipses at the end of the hint text of
our entries and, even though they are present in most mockups, it turned
out they don't like them, so remove them.
It also turned out they don't like the prefixes like "Enter" before it,
so remove those, too.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/977
With the new dialog design the descriptions of entries are now
implemented as hint-text of the StEntry. That means the colon at the end
of the descriptions no longer makes sense and should be removed.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/977
Currently separators get all the padding from regular menu items,
which is excessive for non-interactive elements.
Shuffle style classes around a bit to allow overriding the normal
padding for separators.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1004
Shift, caps-lock and friends change the capitalization of following
key presses. It is unexpected for those keys to have side-effects,
so don't switch to the prompt when they are pressed.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2215
We don't want to show a caps-lock warning when showing a non-password
entry, but we also don't want the layout to jump when changing the
label's visibility.
Achieve that by inserting an empty placeholder label that we can
show whenever the caps-lock warning is hidden.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2215
The promptBox is initially fully opaque, so showing it before the
transition can result in a brief flash before fading in.
Just remove the show() call and let the transition handle the
visibility.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2212
Usually, logging in or unlocking the session is made asynchronously,
and AuthPrompt properly manages which entry is currently visible.
External code don't rely on any specific entry to be set, since it
is AuthPrompt's responsibility to select the correct one to be shown.
However, there's one specific case where AuthPrompt must preserve
the password entry: on reset. The reset code preserved whatever
entry was currently displayed, but after fe69dacaf1, it always
changes to the username entry.
Make sure to show the password entry on reset.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/999
In the past, the session menu button was part of the auth prompt widgetry,
so we didn't have to manually hide it when showing the user list. However,
now it is part of the login screen itself.
Hide the session menu button when the user list is shown.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/999
In the common case where we only have a single unread notification
from a particular app, the count doesn't add useful information.
Reduce clutter a bit by only showing the notification count if we
have at least two.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/997
Clicking or typing to reveal the auth prompt are good options for
mouse/keyboard workflows, but awkward on touch devices. Now that
we have SwipeTracker, adding corresponding gestures support is
easy, so do just that.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/972
The current transition between clock and auth prompt uses a simple
crossfade.
"What kind of spatial model is that?!"
T.B.
Root the transition a bit more by adding translation and scale to
the animation.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/972
Hiding the Caps lock warning label changes the layout of
Auth Prompt. This is specially noticeable when logging in
with unlisted users, where we change the visibility of this
label after typing a username, and the whole user widget
moves a bit.
Change the Cap lock label's opacity instead of hiding it.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/922
Currently, when a null user is passed, we don't add any
username label. That makes the layout of user and no-user
cases inconsistent.
Add a ghost label with no opacity to mimic the username
label.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/922
Currently, AuthPrompt is connecting to its own 'next' signal
signal to react to any of the entries being activated, and do
some actions like starting the spinner and answering the PAM
question.
Refactor this code into another method, and don't connect to
our own signal.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/922
Unfortunately, the question that is displayed comes directly
from PAM. It usually is just "Password:", which comes from
pam-unix, but other questions can be set, usually with the
colons, since they are crafted with a CLI workflow in mind.
Manually drop the colons from questions asked by PAM. This
is also done by the PolKit agent, which shows how the stack
is fragile, but it's what we have for now.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/922
This is a regression from the transition to password entry. Both
entries need to be connected to the relevant signals, otherwise
username-based login won't ever work.
Connect both the text and the password entries.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/922
Currently, there is a dedicated label above the entry to
display the question text. According to the new mockups
for the lock screen, this label doesn't exist; instead,
the question is set inside the entry itself, as a hint
text.
Set the questions as hint texts of the entry, and remove
the now unused label.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/922
If username-based login flow is followed, we need a default avatar
for the userWidget. Hence, check if the user passed to userWidget
is (null) which implies a username-based login flow.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/922
Allow vertical orientation for the userWidget so that the user-avatar
can be centered and user's name can be placed below it. The plan
for 3.36 is to use this vertical userWidget layout for both lock
and login screen.
The userWidget is also used while creating the user-selection list
at the login, hence we still need to keep the horizontal layout
for userWidget in place.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/922
Since the blur sigma decides how many pixels get factored in when
blurring and setting a scale factor increases the background texture by
that factor, the sigma value should also be multiplied by the scale
factor.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/991
There is nothing else to be focused in the lock screen itself -- the
top bar is already handled elsewhere, and the dialog manages itself
now.
Remove the lock screen group from the Ctrl-Alt-Tab manager.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/872
AuthPrompt is the set of actors that contain the user avatar,
the username, and the password entry. With the removal of the
screen shield, the unlock dialog (be it UnlockDialog or the
LoginDialog) is always created, and in the case of UnlockDialog,
so is the auth prompt.
This is problematic, though, since for passwordless accounts,
the simple act of creating AuthPrompt authenticates the user,
and lifts the lock screen.
Create the AuthPrompt on demand in UnlockDialog.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/872
As per the latest lock screen mockups, critical notifications must have
a more prominent, solid color.
Add a .critical style class to critical notification bubbles, and make
them darker.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/872
Now that the screen shield is gone (at least, as it used to
be), the corresponding session mode is not necessary anymore
as well.
Remove the 'lock-screen' session mode, and the corresponding
CSS.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/872
Pretty much what the commit title says.
This gives the lock shield actor another role: instead of
being the interactive screen shield, make it the invisible
actor that prevents interacting with windows while the
unlock dialog is sliding down.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/872
Activating a dialog is slightly different from opening it; the
former is about showing the user authentication widgetry, while
the latter is about creating it and pre-allocating the necessary
resources.
Activate the screen shield dialog when necessary.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/872
The 'onPrimary' argument was being passed to dialog.open(). Turns out,
neither UnlockDialog nor LoginDialog use this parameter.
Remove the unnecessary 'onPrimary' parameter, and cleanup the related
code.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/872
The use of the core idle monitor means that focus change events
are also delayed by keyboard interaction. Since the magnifier is
already in the business of pointer tracking, it's easy enough to
fire the pointer rest timeout from here, so focus changes are
accumulated and delayed.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/984
We may get several a11y events setting the caret on the same
coordinates it previously was. Make focus tracking ignore those,
as we're jumping to the same coordinates again during eg. mouse
operation.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/984
If the crosshair is clipped so it doesn't cover the pointer cursor,
the clip rectangle is skewed towards the bottom/right. This was
made so to accomodate the default pointer, but the unevenness stays
on other pointer cursors, and it makes the crosshair look odd on
short crosshair length.
Make all lines clip to an even distance from the center instead.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/984
It is somewhat unexpected that crosshair color and pointer cursor colors
remain the same across changes in color inversion settings, and may lead
to contrast issues. Apply the effect on the common container, so it
applies to these all.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/984
If the icon proper has opacity of zero then that's probably because a
clone of it is animating. So avoid animating the source actor too.
And if there's any other reason for the opacity being zero, still don't
animate it because we can't see it :)
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/2167
So as to guarantee the unmapped state sticks and doesn't get toggled
back to mapped before we return.
Being in a mapped state when `FolderIcon.vfunc_unmap()` returned was
causing an assertion failure in `clutter_actor_set_mapped` and crashed
the shell.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/2170
The portal helper is rather sensitive because potentially-hostile Wi-Fi
networks can decide to launch it whenever they want (by blocking the
user's connection to the nmcheck domain) and load whatever web content
they want into it. So having this unsandboxed is really extraordinarily
risky. Previously it was a risk we had to accept, because WebKit did not
have a web process sandbox, but now it does. So let's bubblewrap all the
things!
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/983
Commit 147a743d8d moved the suspend and power-off actions into
the submenu that contains the log-out and switch-user actions,
but did not update the submenu visibility logic to account for
the additional actions.
As a result, the submenu is hidden when log-out and switch-user
are unavailable (like on the login screen), even if suspend and
power-off are enabled.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2169
While gnome-shell will now check for extension updates, the checks
are performed infrequently. Opening the Extensions app implies that
the user's current focus is on extensions, so it is an appropriate
time to schedule another updates check.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1968
Now that we can download, apply and display extension updates, it is time
to actually check for updates. Schedule an update check right on startup,
then every 24 hours.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1968
Now that we have support for extension updates in the shell, we
need some place to display the updates to the user.
As we are establishing the Extensions app as the primary way for
managing extensions, it's a natural place for that functionality.
Show which extensions have updates available, and offer a log out
button (so gnome-shell can apply the updates when logging back in).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1968
Until now, it didn't matter whether an extension was installed in the
user's home or system-wide. However with support for uninstallation,
there is now a significant different, as that action is only available
for user extensions.
Account for that by separating extensions by type, so that users don't
have to second-guess which extensions can be fully-managed and which
appear as part of the system.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1968
The newly added expander gives us a place where we can display
more details without cluttering the interface.
Take advantage of that by including the extension website, version
and author.
(Author is in the mockups, but will not actually be shown until
the extensions website is changed to include it in its metadata;
however best to have UI and string in place for the freezes)
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1968
The description can be useful information, but also increases the
visual complexity of the extensions list. Move it into a hidden
details area that can be expanded, which unclutters the interface
while keeping the information readily available.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1968
The current fixed two-line label requires a custom widget, which
make moving to a widget template harder.
As the description will soon move elsewhere anyway, just go back
to a single line with a standard label for now.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1968
Extensions can have a major impact on stability and performance. Now that
the tool will become the main way for users to manage their extensions, it
is an appropriate place to warn the user of that risk.
Add a small info popover to the headerbar to display that warning, together
with the previously removed hint of where to go for finding new extensions.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1968
Currently when the extensions list is scrolled, it is possible to
keynav out of view, as the scrolling doesn't follow the key focus.
Hook up the adjustment to fix that.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1968
Currently the main window is a plain Gtk.ApplicationWindow that is
built and managed from within the application.
As the application becomes more complex, it makes sense to decouple
the two and handle the window from a separate ExtensionsWindow class.
Not least this is a prerequisite of using a widget template for the
window.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1968
GNOME Software will remove its extension support, so we should stop
referencing it in addition to extensions.gnome.org.
In fact, the placeholder is not the best place to hint at where new
extensions can be found, as the user will never see it in case the
distribution includes pre-installed extensions.
So remove the hint altogether, we will add it back in a more prominent
place later.
With the whole placeholder now being much lighter, we can stop dimming
the remaining elements.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1968
If all password entries in dialogs are hidden, there is either an entry
that has visible characters or no entry at all. That means we don't have
to show the caps lock warning at all, so hide it.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/942
Since the headlines of the dialogs now use a much larger font, the
strings need to be shorter so they won't be ellipsized. So use a shorter
strings for those titles and also adjust the title-strings of the
notifications sent by the NetworkAgent to be consistent.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/942
Since the wiggle effect will be used by the redesigned prompt-dialogs
and we always want to use the same parameters, move those as defaults
for the wiggle function to the util.js file.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/942
Since the caps-lock warning adds a lot of spacing to dialogs and the
lock screen, hide it by default and only show it when necessary. To make
the transition smooth instead of just showing the label, animate it in
using the height and opacity.
Also add some bottom padding to the label so we can show or hide that
padding, too.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/952
The caps-lock warning is more related to entries than dialogs and is
also used in gdm, which is not realated to dialogs at all. Rename the
css class to caps-lock-warning-label and move it to the entry
stylesheet.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/952
The Animation class inherits from St.Bin and manages the scale factor
in the image loading, but the widget size doesn't change and doesn't
depend on the scale factor so when the scale factor is different
from 1 the widget size doesn't match the image size.
This patch resizes the Animation widget using the scale factor so the
widget will match the animation images sizes.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1746
Now that we have a way to check for updates and download them, we
should actually apply them as well. Do this on startup before any
extensions are initialized, to make sure we don't run into any
conflicts with a previously loaded version.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/945
While it is possible that an extension has a newer version available
than the previously downloaded update, it's more likely that we end up
downloading the same archive again. That would be a bit silly despite
the usually small size, so we can either use the metadata from the
update, or exclude the extension from the check.
The latter is much easier, so let's go with that for now.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/945
Currently the method installs updates instead of merely checking for
them (or it would do, if it actually worked).
This is not just surprising considering the method name, the whole idea
of live updates is problematic and will not work properly more often
than not:
- imports are cached, so any local modules will stay at their
original version until a shell restart
- GTypes cannot be unregistered
So change the method to only download available updates, and set the
extensions' hasUpdate state accordingly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/945
The current support for extension updates is half-baked at best.
We are about to change that, and implement offline updates similar
to gnome-software.
As a first step, add a hasUpdate property to the extension state
which will communicate available updates.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/945
Since a11f417cd0, both drag and scroll
gestures are added to Main.layoutManager.overviewGroup actor, while
previously drag gesture was added to Main.overview._backgroundGroup
instead. Since we cannot use 2 different actors for dragging and scrolling
anymore. just disable the swipe tracker while dragging a window.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2151
Since the orientation lock menu entry is a proper menu entry instead of
a icon-only button now, we also show a description-text for that entry,
so update this text depending on whether orientation is locked or not to
better reflect what clicking the menu entry will do.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/964
Since we don't really know what the buttons we're adding to the dialogs
are about, we can't configure a button to "be clicked" when the escape
key is pressed. So add a separate escape key handler to fix that, return
-1 and abort the request.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/961
When updating the buttons of the mount dialogs, compare the new buttons
to the old ones and only create new buttons in case something changed.
This makes sure key focus isn't reset or lost unnecessarily while a
dialog is opened.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/961
Since there is a generic layout for dialogs like that now, use it. Also
remove the functionality of focussing a window when clicking a list
item, it's not discoverable at all and pretty unexpected.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/961
On Wayland, the display server is the Wayland compositor, i.e.
`gnome-shell` itself.
As a result, we cannot spawn `gnome-shell-perf-helper` before
`gnome-shell` is started, as `gnome-shell-perf-helper` needs to connect
to the display server.
So, instead of spawning `gnome-shell-perf-helper` from the perf tool,
start it from `gnome-shell` itself.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/941
When do-not-disturb is enabled, non-critical notifications will not
be shown as banners. It therefore makes sense to indicate that state
to the user, so they don't accidentally miss notifications.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/239
Currently the indicator pad requests a size of 0x0 if the corresponding
indicator is hidden. Right now this is enough to balance out the indicator,
but it won't be when we add spacing to the parent container.
Properly hide the pad with the indicator to avoid that issue.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/239
We've had the ability to temporarily disable notification banners
all the way back to 3.0, but we stopped exposing it in the UI with
the 3.16 notification redesign. With the message list being more
concise nowadays and the "Clear" button reduced to a single icon,
we now have space for a "Do Not Disturb" switch again.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/239
We try to make the OSK 1/3rd as big as the monitor. On landscape
layouts we usually get away with it as there's plenty of horizontal
space to enlarge the OSK while keeping the OSK aspect ratio.
In portrait layout, the horizontal space is a lot more scarce so
it means we'll still have plenty of space after making the OSK as
wide as it can possibly be, which will look as odd blank space in
the OSK panel.
In order to fix this, let the OSK panel height be less than 1/3rd
the monitor size if we are dealing with portrait layouts.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/2132
It will happen before next map anyway, and most notably at times
actor sizes produce correct results.
Fixes oddities in emoji pager visibility after showing the emoji
panel, moving to another page, and hiding the OSK with the downward
arrow button. The next time the emoji panel would be shown, panels
had a chance to remain invisible.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/943
It is already scheduled to be set on first map. Doing so here triggers
size and theme node checks the actor tree is not ready for, as the
toplevel actor is not yet attached to the stage.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/943
