Wait until the completion of the mount operation before dismissing the
passphrase dialog, so in case it fails, we can re-use the same dialog
with an error message (like e.g. PolicyKit auth dialogs) instead of
showing a brand new one.
https://bugzilla.gnome.org/show_bug.cgi?id=674962
Wifi and mobile broadband have signal indicators and are thus
more useful than vpn icons in the panel. Therefore, in the case
we have both wifi/3g and VPN we prefer the former as the "primary
icon" and add a lock next to it.
Behavior when VPN is added to wired or other connections is still
preserved: the wired icon is replaced by vpn.
https://bugzilla.gnome.org/show_bug.cgi?id=672591
Sorting by strength is what the other OSes do by default, and it
provides a better UX (by offering your hotspot and router before
the one from your neighbor).
https://bugzilla.gnome.org/show_bug.cgi?id=658946
Only apply the allowAutorun flag for transient notifications, not for
mounts that end up in the resident notification well.
Also, stop looking at volume.can_automount() here, since we already
checked that previously in the mounter, and allowAutorun is enough.
https://bugzilla.gnome.org/show_bug.cgi?id=660595
Previously, a volume was being ignored from autorun if one of these two
conditions were met:
- its mount root file had a native scheme and was mounted in a
non-hidden location
- it had a volume that could have been automounted, and had a flag set
by the shell to allow autorun
In order to effectively ignore volumes that we don't mount ourselves
from our notification system, we have to meet both conditions at the
same time instead.
https://bugzilla.gnome.org/show_bug.cgi?id=660595
This is a fallout from some changes in MessageTray.Source, which now
requires either defining the iconName/iconType properties on it, or
implementing createNotificationIcon, and we're not doing any of those.
Fix it by storing the gicon of the source object and using a helper
method to create the icon actor on demand, to avoid any case when the
same actor might be added twice to different containers.
https://bugzilla.gnome.org/show_bug.cgi?id=678428
The dependency chain spirals out from folks->zeitgeist->xapian...and
I'm really not interested in pulling in all of that into the core
shell.
There is work on splitting out contact search into gnome-contacts; I'd
add a bug link but Bugzilla is down.
When the shell takes control of the screen (for example to show
a modal dialog or to lock the screen), it must reestablish itself
on top of the stack, and in particular restore any unredirected
window so that it is composited below the Shell UI.
Reviewed-By: drago01 in IRC.
There is a race if a channel is invalidated during its preparation: the
'invalidated' signal is already emitted so the Shell will never notice.
We fix this by simply checking if the channel is already invalidated when
receiving it from telepathy-glib.
In the approving case, we reject the full ChannelDispatchOperation as we only
support approving one channel at the time.
https://bugzilla.gnome.org/show_bug.cgi?id=677457
Initially, extensions were loaded after they shell had fully created
the session and all objects, but this didn't allow extensions easy
ways to monkey patch prototypes, as most functions had already been
bound. Remove the historical vestigal function, and just merge the
two together.
https://bugzilla.gnome.org/show_bug.cgi?id=677586
A large amount of extensions have something like this in them:
function init() {}
Since we have encouraged extension authors to try and not make any
changes in init, it feels weird and strange to have to create an
initialization function that does nothing. From now on, don't require
it.
https://bugzilla.gnome.org/show_bug.cgi?id=677586
This allows us to move to a file-monitor based approach in the future.
Since we need signals, we convert the current set of functions to an
object we attach signals too, leading to the new ExtensionFinder object.
https://bugzilla.gnome.org/show_bug.cgi?id=677586
We explicitly include NoDisplay applications in the ShellAppSystem because
we want app tracking for them, but we explicitly filter NoDisplay applications
out when showing them to the user because we don't want to show them to the
user. We also based our "All" apps view on a flattened list of apps. While
we did check for NoDisplay on the app item itself, we didn't check against
its parents. Refactor the app display view to not use a separate flat list
of applications, but instead a concatenation of all the applications in all
the loaded categories.
https://bugzilla.gnome.org/show_bug.cgi?id=658176
clutter_actor_get_children requires making a temporary GSList from
a linked list structure, and then creating a JS Array from that GSList.
For simple cases like the number of children, use clutter_actor_get_n_children.
https://bugzilla.gnome.org/show_bug.cgi?id=677426
Show the dialog on the monitor containing the pointer, rather than
the monitor with active focused window. This brings it inline with
the behaviour seen when launching applications.
Remove the focusMonitor/focusIndex from LayoutManager. These
properties were only used by the modal dialogs. Remove them since
they are not being used elsewhere.
https://bugzilla.gnome.org/show_bug.cgi?id=642591
Don't show non urgent notifications when the primary monitor
is in fullscreen (user watching a movie, having a presentation,
playing a game ...).
Once the user leaves fullscreen show the messagetray so that the user don't
miss any notification (same as in "back from idle").
https://bugzilla.gnome.org/show_bug.cgi?id=677590
Do not overflow currentItems array. If the Menu section is filled
via model items-changed callback the position in the model passed to
the RemoteMenu _modelChanged can be a to be added asynchronously
action-added. Thus the item does not yet exists in the currentItems.
https://bugzilla.gnome.org/show_bug.cgi?id=676447
_startTimer adds a tweener to implement the description countdown, which
updates the entire content on each iteration, including the icon. This
causes a significant impact on performance, especially when accessibility
is enabled, as it causes a flood of AtkObject:state-change:showing events.
As the countdown only affects the description, factor out _updateDescription
and use it in _startTimer, and only do a full update of all contents when
necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=674210
When displaying children, we need to make sure that we use the rowLimit
property that we pass to iconGrid, rather than assuming that it's
always MAX_SEARCH_RESULTS_ROWS in case some subclass (in an extension maybe)
wants to do something different.
https://bugzilla.gnome.org/show_bug.cgi?id=675527
Depending on the number of accounts, the type or simply the network,
there may be a noticable lag between setting the status and the actual
status change.
Use the new user-status-pending icon to indicate progress.
https://bugzilla.gnome.org/show_bug.cgi?id=659067
Refactor NMDeviceVPN to be more like the other NMDevices, including
having a valid getSectionTitle() and emitting signals when the
underlying connection changes state.
Use the existing notification infrastructure to hook these signals
to actual notifications (including some code consolidation).
https://bugzilla.gnome.org/show_bug.cgi?id=676330
Currently we only connect to the 'notify::n-workspaces' signal the
first time the overview is shown, which means we will miss any
changes to the workspace layout in the meanwhile.
In particular, the decision of whether the workspace switcher should be
shown is taken before the dynamic workspace handling takes over, and is
thus based entirely on the value of the num-workspaces user preference
rather than the actual number of workspaces.
Just connect the signal in _init() (with the nice side-effect to make it
explicit that the signal handler won't ever be disconnected).
https://bugzilla.gnome.org/show_bug.cgi?id=673198
role/label_actor should be used for the actor that will receive
the focus. In some cases it was also (wrongly) set on the
container, so using an AT like Orca, it exposed both.
https://bugzilla.gnome.org/show_bug.cgi?id=672242
It's used right away to discard some Empathy notifications.
This regression has been introduced during the 3.4 cycle when 'hints' has been
turned to a GVariant.
https://bugzilla.gnome.org/show_bug.cgi?id=675370
Ensure that the UI is updated when a connection changes name or id,
even if it was already known by a device.
Also, use less private properties on NMConnection objects, as they
can become stale and cause problems.
https://bugzilla.gnome.org/show_bug.cgi?id=677097
We now drop all status icons that are not explicitly enabled, which
breaks the ibus icon. Add it to the list of allowed icons until we
merge it with the keyboard one.
https://bugzilla.gnome.org/show_bug.cgi?id=677058
These methods were initially introduced when I was planning on having
an explicit DisableExtension/EnableExtension, instead of hooking up
a gsettings notify. This behavior was changed at the last minute, but
the methods were kept to avoid having to change the browser-plugin.
Consumers of this API should just set the GSettings key directly
instead now.
https://bugzilla.gnome.org/show_bug.cgi?id=676837
In Shell.SessionType.USER mode, two separate setup functions were
used during startup. With the new feature-based checks, the second
one is now almost empty, so move its remaining code into the first
function and remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=676156
Add a sessionMode.allowKeybindingsWhenModal property, which determines
whether keybindings should still be handled while a modal dialog is
up or not.
https://bugzilla.gnome.org/show_bug.cgi?id=676156
Instead of falling back to a set of default values or crashing the
window manager when an invalid mode is specified, check the value
of the ShellGlobal:session-mode property before taking over as WM
and make a clean exit if it cannot be resolved to an existent mode.
https://bugzilla.gnome.org/show_bug.cgi?id=676156
Rather than accessing global.session_type / global.session_mode
all over the place, delegate mode information to a dedicated
sessionMode object. While not very useful for now, we will replace
checks for a particular mode with checks for particular properties
that sessionMode defines based on global.session_mode.
https://bugzilla.gnome.org/show_bug.cgi?id=676156
Since commit 518282e169, we hide both "Switch User" and "Log out"
on single-user systems. However, if there is more than one session
available, users may still want to get back to the login manager
to change sessions.
Add both "Log out" and "Switch Session" items in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=675802
Bluetooth PINs are required to have 6 digits, so enforce that
condition by making the PIN request notification's confirm
button insensitive unless the entered PIN has the correct length.
https://bugzilla.gnome.org/show_bug.cgi?id=651251
The availability of a notification action may depend on conditions,
so add a method to control the sensitivity of buttons which have
been added with addButton().
https://bugzilla.gnome.org/show_bug.cgi?id=651251
When the appMenu is not available, for instance when no windows are
open (on the current workspace), we make its actor unreactive to
"hide" it from keynav. However the menu can still be triggered
erroneously when using the corresponding keyboard shortcut, so
add a check for the actor's reactivity there as well.
https://bugzilla.gnome.org/show_bug.cgi?id=676316
For most subclasses, this is a direct swap -- a lot of the time, the
constructor was a blank class that override createNotificationIcon,
and called _setSummaryIcon in _init.
https://bugzilla.gnome.org/show_bug.cgi?id=661236
Rather than ask most users of Source to subclass it to simply set their icon,
just allow them to create a new instance and add it without any complex magic.
https://bugzilla.gnome.org/show_bug.cgi?id=661236
Technically those are minor changes, but people will love us anyway:
- change the default of the <alt>ernative to "Power Off"
- remove "Online Accounts" item
- regroup the remaining items
- remove ellipses from labels
https://bugzilla.gnome.org/show_bug.cgi?id=675802
Now that all searches are async we can remove the code path for the
SearchSystem::search-completed signal which is no longer useful.
This patch ends up fixing the status text not being updated for when
there are no results.
https://bugzilla.gnome.org/show_bug.cgi?id=675328
As shown in the previous commits, synchronous search is easily implemented
by the asynchronous search API. The only reason we still have a
synchronous search API is of historical reasons. Well, we're not a museum,
and git log can keep our fossils safe if need be....
https://bugzilla.gnome.org/show_bug.cgi?id=675328
