If geoclue reports that we can't aquire location, we hide the menu. This
will typically happen when user is offline (and doesn't have a 3G
modem). This is likely not what we want since this like a temporary
situation and user would want the ability to toggle geolocation still
even if its currently not possible any applications to query the
location.
https://bugzilla.gnome.org/show_bug.cgi?id=727398
We need to use a GdkPixbufLoader instead of the straightforward
gdk_pixbuf_new_from_file(), since we want to load the image already
scaled if possible - e.g. if it's an SVG file.
https://bugzilla.gnome.org/show_bug.cgi?id=726907
* 'Turn On' -> 'Enable'
* 'Turn Off' -> 'Disable'
* 'Off' -> 'Disabled'
* 'On' -> 'In Use' or 'Enabled' depending on whether or not service is
in use.
https://bugzilla.gnome.org/show_bug.cgi?id=726498
Telepathy 1.0 will not be compatible, and will probably require
source changes. telepathy-glib 0.12 and telepathy-logger 0.2 are
the 0.x ABIs (they were the first stable-branches to have g-i).
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=721704
Reviewed-by: Giovanni Campagna
When a user logs in to a wayland session, we keep the login screen
running on the X server with the login screen running in a deactivated mode.
This commit makes sure it get reactivated when the user comes back to
the VT (from user switching, logout or just ctrl-alt-f1).
https://bugzilla.gnome.org/show_bug.cgi?id=726989
In addition to BluetoothAirplaneMode, we need to check also
BluetoothHasAirplaneMode, which is indicative of bluetooth rfkill
devices (and by extension bluetooth adapters).
This prevents showing the menu if there is no adapter present.
https://bugzilla.gnome.org/show_bug.cgi?id=725057
Most system menu entries are disabled on the lock/login screen;
there is no good reason why users should be allowed to turn bluetooth
on/off (but not e.g. Wifi), so disable the entry as well.
https://bugzilla.gnome.org/show_bug.cgi?id=726319
When reacting to background settings changes, we may end up queuing
more than one load. The redundant backgrounds are expected to be
destroyed when the previous background has faded out; however since
commit 933f38390b, the tweened actor is the same for all
consecutive load operations and we end up with a single onComplete
handler, ergo a single destroyed actor.
As new backgrounds are always added to the bottom, we are not only
piling up additional background actors, but break changing backgrounds
more than once, as the correct background ends up being covered by
previously added redundant actors.
Fix this by destroying redundant actors right after loading rather
than waiting for the fade animation to complete.
https://bugzilla.gnome.org/show_bug.cgi?id=726120
Folders use a 2x2 grid of the first 4 app icons as icon - if a folder
contains less apps, we currently skip the corresponding grid positions.
As a result, the overall size request may be smaller than the one for
other icons, making the folder icon look out of place.
Fix this by always using a full grid as folder icon, using dummy actors
as necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=726322
At some point ScreenShield had code to do this, I don't know when
it was lost, but it makes sense and avoids having to move the mouse
just to see the shield.
https://bugzilla.gnome.org/show_bug.cgi?id=726378
With the switch to a table layout in commit f959cafb36, setting
alignments to place the individual icons at the outer edge of the grid
stopped working. Remove that code and add some explicit spacing instead.
https://bugzilla.gnome.org/show_bug.cgi?id=726323
If the notification is updated while SHOWING, we'll overwrite the
tween updating it to the new 'y' position, but forget to update the
state to SHOWN at the end of our transition. Make sure to always set
the state to SHOWN at the end.
https://bugzilla.gnome.org/show_bug.cgi?id=704844
This code may have worked when written in 2009, but later gjs commit
b5e467d89aea43a8e32a1138d232c8a32e6b0785 removed the priority
parameter from idle_add.
Now, when running a constantly-updating client (es2gears) on an
embedded platform, _updateRegions() does not get called and I see
unresponsive window decorations.
Update the code to use meta_later_add() like other parts of the
shell, which is actually slightly better in this case anyway.
Solves the unresponsiveness problem.
https://bugzilla.gnome.org/show_bug.cgi?id=585500
The smartcard service is put in the foreground in two cases:
1) If password service is disabled by admin configuratoin
2) if a smartcard is inserted
In either case we don't want to ask the user to pick a user from the
userlist. We currently only avoid asking in case 2.
This commit fixes case 1.
https://bugzilla.gnome.org/show_bug.cgi?id=726263
We only want to react to the card the user logged in with, at
the unlock screen. We check "at the unlock screen" by checking
the "reauthenticating" state variable. That variable is the
wrong one, though. It gets set too late, and in some cases, gets
set at the login screen, too. We should be checking this._reauthOnly
instead.
This commit fixes that.
https://bugzilla.gnome.org/show_bug.cgi?id=726262
If a user inserts the smartcard they logged in with into the system,
it's supposed to lift the shield and prompt for pin. That doesn't
happen because the parameter list of the smartcard-inserted signal
handler is wrong.
This commit fixes that.
https://bugzilla.gnome.org/show_bug.cgi?id=726262
Doing so is inconsistent with the behavior in the summary, and
is quite annoying when dealing with chats (because there is no way
to unfocus a chat notification with the keyboard only)
https://bugzilla.gnome.org/show_bug.cgi?id=724178
We can't let live (ie, never destroyed) actors undergo GC, because
they will emit :destroy signals during finalization and assert/crash
libmozjs. Properly destroy all actors before letting the GC
free them.
https://bugzilla.gnome.org/show_bug.cgi?id=724798
If we have the following sequence:
cache.getImageContent({ filename: "foo", cancellable: cancellable1 });
cache.getImageContent({ filename: "foo", cancellable: cancellable2 });
cancellable1.cancel();
Then the second load will complete with "null" as its content, even though
it was never cancelled, and we'll see a blank image. Meanwhile, since the
second load simply appends to the list of callers for the second load,
cancellable2 does absolutely nothing: cancelling it won't stop the load,
and it will still receive onFinished handling.
To prevent this from happening, give the actual load operation its own
Gio.Cancellable, which is "ref-counted" -- only cancel it when all the other
possible callers cancel.
Based on work from Jasper St. Pierre <jstpierre@macheye.net>
https://bugzilla.gnome.org/show_bug.cgi?id=722149
At the moment when a file is loaded, we iterate through the list of
pending file loads and ignore any unrelated to the file, then iterate
all the callers of the related file loads and finish them.
In fact, there can only ever be one pending file load related to the
file, and we already know it, so we can avoid the ugly nested loops.
https://bugzilla.gnome.org/show_bug.cgi?id=722149
This commit moves the code around a bit such that the
caller gets allocated up front and then a file load is either
found or created to attach the caller to.
Functionally, the code is the same, it's just now factored in a way
that will make it easier to fix a bug with cancellation later.
https://bugzilla.gnome.org/show_bug.cgi?id=722149
Copying is actually a lightweight operation, so trying to avoid it just adds
code complexity for little gain.
Based on work from Jasper St. Pierre <jstpierre@macheye.net>
https://bugzilla.gnome.org/show_bug.cgi?id=722149
Instead of poking through IDLETIME, which confuses the state tracking
and can prevent automatic suspend, send a special signal to GSD
when the screen is to be waken up for a notification.
Someday we'll bring over all the state tracking and avoid this
ping-pong between gnome-shell and gnome-settings-daemon, but
that day's not today.
https://bugzilla.gnome.org/show_bug.cgi?id=712706
NMApplet will call removeConnection() unconditionally on all sections,
including those that had nothing to do with the connection in the first
place.
Fixes:
Gjs-WARNING **: JS ERROR: TypeError: this._connectionItems.get(...) is undefined
NMConnectionSection<.removeConnection@resource:///org/gnome/shell/ui/status/network.js:323
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
NMApplet<._connectionRemoved@resource:///org/gnome/shell/ui/status/network.js:1885
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
https://bugzilla.gnome.org/show_bug.cgi?id=725958
Loading the user list can be expensive, for instance when there is
a large number of users and/or their avatars have to be fetched over
the network. In case the user list is disabled anyway, there is no
point in doing that work just to hide it, so stop doing that.
https://bugzilla.gnome.org/show_bug.cgi?id=725905
When the user changes the active day by mouse click or keyboard focus
plus key press on a day in the grid, always move the keyboard focus to
the newly activated day.
This basically restores functionality that was introduced in commit
31478e9fb4 but got lost again in the re-factoring in commit
cc4659f5c6.
https://bugzilla.gnome.org/show_bug.cgi?id=725606
Having to go through import.gi is awfully inconvenient when one
is using the looking glass as a quick gjs console, and we're
already importing all sorts of stuff there.
https://bugzilla.gnome.org/show_bug.cgi?id=725832
Don't forget to rebuild the calendar when changing the setting
'org.gnome.shell.calendar show-weekdate'. This wasn't happening anymore
and changing the setting resulted in a calendar without the days
grid.
https://bugzilla.gnome.org/show_bug.cgi?id=725533
Once you start navigating between months, you can't return to the
current day. However, the current day is always displayed above the
calendar grid. Fix this by making the current date clickable; when
clicked, the calendar grid jumps back to that day.
https://bugzilla.gnome.org/show_bug.cgi?id=641366
The profile name is most often not useful (because it's an
autogenerated string like "Wired Connection 1"), and even when it
is, it's already available in the submenu.
https://bugzilla.gnome.org/show_bug.cgi?id=725586
Commit b7e1539699 removed the size to support hidpi but that caused the
actor to no longer be square. Fix that by going back to setting a size
but apply the scale factor before doing so.
To be able to correctly setup dbus policy, I had to change the expected
agent D-Bus API a bit: Now object path is fixed and not different for
each user.
https://bugzilla.gnome.org/show_bug.cgi?id=725082
Commit 61a58ff3c9 replaced the (removed in commit 254afc50223a7)
MetaWindowActor.get_workspace() method by MetaWindow.get_workspace(),
but did not take into account that the return values differ - the
former returns the workspace index, the latter the workspace object.
https://bugzilla.gnome.org/show_bug.cgi?id=724686
With tile previews being implemented as Clutter actors in the shell, we
can now easily add fancy animations when showing/hiding the preview.
Besides looking more polished, the animations also help understanding
what will happen to the window when the drag is finished.
https://bugzilla.gnome.org/show_bug.cgi?id=665758
Interrupting update installation can mess up the package database quite
a bit and could lead to totally destroying the distro installtion. To
avoid running out of juice during an upgrade, warn when someone tries to
install updates on battery power.
https://bugzilla.gnome.org/show_bug.cgi?id=722898
This adds a checkbox for installing software updates to the shut down
dialog. The implementation relies on an already prepared offline update
and uses PackageKit's pk-trigger-offline-update helper to trigger the
installation.
https://bugzilla.gnome.org/show_bug.cgi?id=722898
This moves the dialog type overriding that gnome-software uses to bring
up restartInstallDialogContent from _sync() to OpenAsync(), in order to
ensure the type is overridden early enough to show the correct buttons.
While at this, make sure the & symbol in the button's label is escaped
to avoid runtime warnings, now that the label actually gets used.
https://bugzilla.gnome.org/show_bug.cgi?id=722898
Currently workspaces (except for the last one) are removed when
they become empty. While we do have special treatment for the
case where the currently active workspace is removed, we just
move directly without animations to the last workspace to avoid
ending up on a "random" workspace. However this behavior is still
a bit confusing, so keep the workspace around instead until the
user decides to move to another one.
https://bugzilla.gnome.org/show_bug.cgi?id=709064
Add a key 'disable-extension-version-validation' key that disables
the validation of extension's claimed to be supported shell version
with the shell version and just load all extensions unconditionally.
https://bugzilla.gnome.org/show_bug.cgi?id=724683
Until now the arrows were the associated arrow
character of the font. This cause some problems like
different arrows for different fonts, and size can be
altered because of the font size.
To solve that, use an image for the arrows.
https://bugzilla.gnome.org/show_bug.cgi?id=720206
Currently the animation of the arrows doesn't take
into account previous rotation.
Since in a incoming patch we will use one arrow
and rotate it to generate the four directions, we
need that the animation use relative rotation.
https://bugzilla.gnome.org/show_bug.cgi?id=720206
Currently destroying a menu's actor and calling its destroy() method
are subtly different - the latter will also result in the menu being
removed from the corresponding menu manager.
There is no good justification for that behavior, so make both actions
behave the same.
https://bugzilla.gnome.org/show_bug.cgi?id=724690
Until now the timestamps were using 24h format.
Check gsetting clock-format to know when
the user is using 12h format or 24h format and
make the timestamp acordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=715158
Multiple connections for the same device are mutually exclusive, so
a switch is not the appropriate UI metaphor. Use a radio item instead,
and provide a separate "Turn off" item to disconnect.
Behavior when there is only one connection is not changed, there
is a single Connect/Turn off item.
https://bugzilla.gnome.org/show_bug.cgi?id=723570
We don't watch for timestamp changes, and sorting by name keeps
the order consistent and predictable. In practice, there should
be at most 3 or 4 elements, so the user will always read all them
at once and sorting is irrelevant.
https://bugzilla.gnome.org/show_bug.cgi?id=723570
If the connection name is changed, the UUID doesn't necessarily,
so checkConnection would take the early return path. Make sure
we update the existing menu item too.
https://bugzilla.gnome.org/show_bug.cgi?id=723570
The active_connection might be null, but the NMApplet code might
still belive the device wrapper is the primary connection (because
dbus signals are emitted one after the other).
(Also, remove an old and wrong comment about bluetooth in wwan code)
Fixes:
(gnome-shell:22511): Gjs-WARNING **: JS ERROR: Exception in callback for signal: icon-changed: TypeError: this._device.active_connection is null
NMDeviceWired<.getIndicatorIcon@resource:///org/gnome/shell/ui/status/network.js:475
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
NMApplet<._updateIcon@resource:///org/gnome/shell/ui/status/network.js:1790
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
_emit@resource:///org/gnome/gjs/modules/signals.js:124
NMConnectionSection<._addConnection/<@resource:///org/gnome/shell/ui/status/network.js:265
_emit@resource:///org/gnome/gjs/modules/signals.js:124
NMConnectionItem<._sync@resource:///org/gnome/shell/ui/status/network.js:137
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
NMConnectionItem<.setActiveConnection@resource:///org/gnome/shell/ui/status/network.js:169
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
NMConnectionDevice<._activeConnectionChanged@resource:///org/gnome/shell/ui/status/network.js:327
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
https://bugzilla.gnome.org/show_bug.cgi?id=723570
This reverts commit 5d05b66902.
Had a long discussion with Bastien Nocera and Allan Day on IRC about
this and in the end we decided to go with the simple on/off controls for
now.
Conflicts:
js/ui/status/location.js
https://bugzilla.gnome.org/show_bug.cgi?id=723684
Add more time to the fade in/out animation when switching
views so they don't switch abruptly and add a delay
between view switch animations to avoid morphing.
https://bugzilla.gnome.org/show_bug.cgi?id=722331
Split the current implementation of SourceActor into
SourceActor and SourceActorWithLabel.
In this manner we can use source actors withouth count labels,
required in the screenShield to not clash with the count
text label.
https://bugzilla.gnome.org/show_bug.cgi?id=709275
When exact accuracy (i-e GPS) is available, allow user to disable that.
When users don't want application to get their precise location, they
can now opt for network-based geolocation only, which can be
street-level at best.
https://bugzilla.gnome.org/show_bug.cgi?id=723684
Instead of relying on geoclue to store this user configuration, lets
keep it in gsettings. Geoclue is a system service and therefore is not
the appropriate entity to keep this info.
https://bugzilla.gnome.org/show_bug.cgi?id=723684
Instead of overriding the actor's request with the icon size, just set
the new icon size on the actors, and let the default handler take the
preferred size of children.
https://bugzilla.gnome.org/show_bug.cgi?id=705410
Now that we are indicating 'geolocation in use' to user, we better also
provide at least a way to disable geolocation. Once this is in place, we
can provide slightly better controls rather than simply on/off switch.
https://bugzilla.gnome.org/show_bug.cgi?id=723684
The current middle-click action of opening a new window on a new
workspace is a bit peculiar; it is also not overly hard to achieve
the same result by moving a new window to the desired workspace or
selecting a workspace before opening a new window. Just opening
a new window is also a more common action, so having a shortcut
available that doesn't require a modifier is a good idea as well;
change the middle-click behavior accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=695010
Having terminal launchers behave differently than any other launchers
is non-obvious and confusing. Remove the special-casing to restore
consistency, we will make the new window action more accessible
instead.
This reverts commit 68faba6bde, 4ed0f3e5f0
and 887a21afb9.
https://bugzilla.gnome.org/show_bug.cgi?id=695010
The design says that the noise texture is the implicit bottom
layer, and so it's appropriate to use it togheter with the default
color to cover the dead area outside the screen which becomes
visibile when scrolling.
https://bugzilla.gnome.org/show_bug.cgi?id=724305
In addition to checking the current settings, check also if the
zoom region is active before registering the event listener.
This way, we avoid DBus traffic for events we're not interested in.
Also, make FocusCaretTracker resilient to multiple register/deregister
calls (which can now happen).
https://bugzilla.gnome.org/show_bug.cgi?id=724305
It's possible that the DBus call goes in timeout (which is bad,
but unavoidable, given that atspi is synchronous) or fails
because the component has been removed (race condition). Those
errors are not dependent on gnome-shell, but on faulty applications
(mostly).
If they happen, log a debug message and continue.
https://bugzilla.gnome.org/show_bug.cgi?id=724305
If an actor is destroyed, calling get_transformed_size()/position()
can return bogus values and trigger JS exceptions.
This can happen if a tracked actor comes from an extension
(such as classic mode's window-list) and that extension is
deactivated.
https://bugzilla.gnome.org/show_bug.cgi?id=723661
This reverts commit a36bfced47.
get_available_connections() returns the connections that are
available right now, ie, with the currently visible APs, but
that might change while the dialog is open, so we can't use it.
https://bugzilla.gnome.org/show_bug.cgi?id=709128
To distinguish the bluetooth network menu from the bluetooth
menu proper, use the device name as the label.
Also, replace Connect with "Use as Internet connection"
https://bugzilla.gnome.org/show_bug.cgi?id=709353
The design says "when a network cable is connected", not
"When a network cable is connected and the link is up and we
have an IP etc. etc." (which is what ACTIVATED would imply).
https://bugzilla.gnome.org/show_bug.cgi?id=723570
Rather than just showing "No networks", inform the user if airplane
mode is on or if wifi is off, and allow the user to change that
from the dialog (if possible).
https://bugzilla.gnome.org/show_bug.cgi?id=709128
Ideally, we should keep scanning while the dialog is open, and
stop (or reduce the frequency) when it's closed. Forcing a new
scan when the dialog is opened empty is a close approximation
and increases the probability that the user will find the AP
he needs.
https://bugzilla.gnome.org/show_bug.cgi?id=709128
If airplane mode is enabled with an HW switch, we can't turn it
off from the menu, so make the menu item insensitive and
replace it with a helpful tip.
https://bugzilla.gnome.org/show_bug.cgi?id=709685
The unredirect feature does not apply to the magnifier and it
prevents users from gaming whilst it is on so disable when magnifier
is active and allow magnifier users to game!
Bug https://bugzilla.gnome.org/show_bug.cgi?id=708985
The DESKTOP window might not be located at (0,0), in particular
on multi-monitor setups. While we already consider this by setting
the clone's position, we then stuff the clone into a container which
ignores it - meh ...
https://bugzilla.gnome.org/show_bug.cgi?id=723306
If the user mostly uses the All Apps view and uses it as his default view,
we shouldn't reload frequent data after a timeout. Simply do it when the
view is mapped.
https://bugzilla.gnome.org/show_bug.cgi?id=723179
Need to manually dispose of cairo contexts used in gjs with $dispose(),
or the context object will leak. These classes used cairo for drawing but
were missing the dispose call.
https://bugzilla.gnome.org/show_bug.cgi?id=722812
get_categories() returns an unparsed string, not a list of categories.
We need to parse the list by splitting on ';' to deterine whether the
actual 'TerminalEmulator' category is in the list, rather than something
like 'X-GNOME-TerminalEmulator'. It's an edge case, but I need to split
the list properly for the new folders, so I might as well fix this.
https://bugzilla.gnome.org/show_bug.cgi?id=723179
