The PointerWatcher passes the current pointer position to every watch,
so we don't have to query the pointer again scrollToMousePos() is used
as watch callback.
While that should be the only use, be conservative and still query the
pointer when called without arguments.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1932>
Right now the Show Password menu is shown unconditionally for password
entries, ignoring the org.gnome.desktop.lockdown disable-show-password
key.
StShellEntry now honors that key for its peek icon, and there's little
reason for the peek icon and the menu to ever be out of sync.
This commit forces the menu and the icon to always be in sync, and
so makes the menu lock down work automatically, too.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/687>
The behavior when switching workspaces now with the touchpad gesture is
very very weird, it almost always swipes to the last workspace instead
of the next one.
So revert this change again and only swipe a single page per gesture. We
can enable long swipes again when we've figured out a proper way to
detect what the user wants (which is going to be quite challenging), see
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4355.
This reverts commit dfae3281b9.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1933>
ClutterVirtualInputDevice::notify_keyval() expects time to be in
microseconds but Clutter::get_current_event_time() returns the time in
milliseconds. On Wayland the generated event triggers all the warnings
in MetaDisplay::sanity_check_timestamps() due to the event time
seemingly being in the past.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1926>
Dragging a window preview in the overview is supposed to change the
opacity of the dragged actor. This however fails for minimized windows,
because Workspace::allocate() also changes the opacity of those. The
allocation gets triggered by removing the window actor from the
workspace when starting the drag. Avoid this by only changing the
opacity during the overview transitions.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4292
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1847>
At the moment user switching functionality is controlled by two
settings:
org.gnome.desktop.lockdown disable-user-switching
for the panel when the session is unlocked, and
org.gnome.desktop.screensaver user-switch-enabled
for the unlock dialog when the session is locked.
Having the lockdown setting not apply when the screen is
locked is counterintuitive.
This commit makes the unlock dialog honor both settings.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1833>
Since this is a bin and not a button, and it doesn't have any click/keyboard
handling on its own (as in that case it needs a parent button wired like in
the messages list controls), it is confusing that it has can_focus set to
True. To avoid any confusion, this commit removes it without breaking anything
since it had no real use.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1920>
This one was moved to Meta.Context as well.
I don't know why the `debugexit` command quit with an error code
(it dates back all the way to commit 98bd590a5d). Terminating on
request by the user doesn't sound like an error, so don't replicate
that particular behavior.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1917>
Before this, creating a separate instance of `Location.Indicator` failed
because it tries to create export the same DBus path.
This is useful for extensions adding panels on multiple monitors. But
it also seems like a cleaner design to separate the indicator widget
from the logically separate role as a Geoclue agent.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1919>
We build controls layout using the whole monitor vertical space as
available, however extensions or external apps in X11 may reduce the
workarea size horizontally and the shell should always take care of it.
Given that we're already assuming that the allocation is monitor-based
and that we're adjusting it to the workarea, we can just make it more
explicit by using a workarea box that is used as the allocation area.
As per this, we also apply the same logic of applied to the vertical
dimension to the horizontal one.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1892>
To compute the available height for the layout we're currently using the
panel position, while this works for the current and default setup, the
shell may be configured to use a different workarea, so we should rely on
it to compute the available space, instead of a specific widget.
So get the current monitor index for the current view and use its coordinates
instead.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1892>
The background group is currently allocated taking care of the workarea
x, y offset but not of its width/height and this may lead to building a
wrongly sized workspace view when the workarea size is not matching the
monitor size (like when there are struts set).
So, take care of the difference between the workarea and monitor
absolute end coordinates to allocate the background scaled content box.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1892>
We currently disable all network items on both the lock- and login
screen. While it makes sense to be very restrictive on the lock screen,
there are some (fringe) use cases for being more permissive on the
login screen (like remote home directories only accessible via VPN).
There's precedence with the power-off/restart actions to be less
restrictive on the login screen, and since we started respecting
the `network-control` polkit action, it's possible to restore the
old behavior if desired.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1874>
NetworkManager installs a `network-control` polkit action that can
be used to disallow network configuration, except that we happily
ignore it. Add it to the conditions that turn a network section
insensitive.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1874>
Setting up a connection for an Enterprise WPA(2) encrypted wireless
network requires Settings. That's not available when windows are
disabled via the session mode, so filter out affected entries.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1874>
The item launches the corresponding Settings panel when activated, which
doesn't work when windows are disabled by the session mode. Rather than
failing silently, turn the item insensitive.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1874>
Unaccelerated deltas make sure the gesture works the same regardless of how
fast the fingers move; this is what we were already doing for scrolling.
Remove the swipe multiplier as the deltas already match scrolling other than
the 1/10 multiplier Clutter applies to scrolling specifically.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1763>
Since commit 3fb02843, we no longer skip allocation for
results that don't fit the width, and give them a 0x0
allocation instead.
That has the unintended side effect of those children now
being available to keynav. There are cases where we want
0-sized actors to be part of the focus chain (e.g. FocusTrap),
but this isn't one of them, so explicitly exclude 0-sized
children from keynav.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4470
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1916>
Destroying the source from an action callback will result in the
notification being destroyed twice:
- source.destroy() destroys all its notifications
- a notification destroys itself after an action
was activated
This results in unwanted log spam when attempting to dispose the
notification for a second time.
There is actually no good reason for destroying the source explicitly,
as sources already self-destruct with their last notification.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4457
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1908>
Currently we only mark the banner as removed if it is destroyed
while in SHOWN or SHOWING state, but not if we're already HIDING
(for example in response to `NotificationBanner::done-displaying`).
If this happens, we'll try to destroy the notification again at
the end of the transition, which leads to (harmless but annoying)
log spam since Notifications were turned into GObjects (that are
disposed when destroyed).
Address this by always marking destroyed banners as removed, while
still only triggering a state update while shown (or in the process
of being shown).
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4457
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1908>
These do some some signals connection and monitor layout tracking
that we forget to disconnect when the magnifier is disconnected.
This causes warnings if enabling the magnifier, disabling it,
switching to another tty, and back. (Presumably also happens for
monitor hotplugs).
This signal should just stay connected as long as it's needed,
so add a setEnabled() method on the CrossHairs actor that we
can hook on the magnifier.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1902>
Some popovers like the ibus candidate popover may be requested while
showing an unredirected fullscreen window. Disable unredirection
while the popover is visible so that it can actually be shown.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1900>
When implementing a D-Bus method synchronously, regular JS methods are
used. That is, whatever the method returns is passed as return value
to the method invocation.
However for asynchronous implementations, we need to explicitly return
a value to the invocation, otherwise the caller will wait until it times
out eventually.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1891>
The appDisplay used to be accessible via the viewSelector, but
that is gone now. Commit c09c070b15 adjusted the code, but the
replacement uses a Main.overview.appDisplay accessor that never
existed, whoops.
Fix this by exposing a new selectApp() method directly on the
overview, so we don't have to shuffle the appDisplay through
controls → overviewActor → overview.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1891>
With Xwayland started on demand, mutter/gnome-shell will spawn Xwayland
and GNOME settings daemon Xsettings.
Currently, gnome-shell uses a timeout of 5 seconds before canceling the
launch and declare failure to start X11 services.
While 5 seconds may seem like a lot of time, when this is executed on a
virtual machine part of a QA tests under load, this causes random
failures.
There is no good value here, we could increase the timeout but it will
always remain racy. Instead, remove the timeout, systemd itself already
has a timeout mechanism (with a much longer wait time).
Thanks to Benjamin Berg <bberg@redhat.com> for finding the root cause
and suggesting the fix.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1888>
Right now we pop the modal immediately when closing, so the key-release
event of the Escape key ends up in the focus window which may consume it
for leaving fullscreen mode or similar.
We can avoid that in many cases by keeping the modal grab until the end
of the transition, as the key-release event will then likely occur while
the grab is still in place (provided animations are enabled).
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1880>
If parsing the pipeline fails for some reason, we currently end up
with a zombie session that leads to a stuck recording indicator in
gnome-shell.
Instead, properly tear down the session to allow mutter and gnome-shell
to correctly update their state.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1878>
