The interface name when a device is added may not be the final one. For
example when using USB tethering, it will first appear as 'usb0' before
being renamed to something like 'enp0s20f0u1' depending on the port the
phone is plugged in.
As a result, we will ignore the new interface name in that case and fail
to associate the correct connection with the device: Instead of the
correct "USB Ethernet" (or user-customized name), it will show up as
"Ethernet".
Fix this by updating names and connections when a device's interface
property changes.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/534
This makes it possible to drag a window which appears connected with the
panel, even if it is not in focus. As a result, it should be easier to
manipulate side-by-side windows.
https://bugzilla.gnome.org/show_bug.cgi?id=679290
Images are loaded either with a supplied fixed size, or using the "native"
dimensions of the file. When creating a content image from the loaded data,
we currently simply apply this directly to the preferred size.
This works usually fine: GdkPixbuf will always keep the aspect ratio, so
if only one dimension is provided, the other will be adjusted accordingly:
Loading a 200x200 image with a requested size of (100, -1) will result in
a 100x100 content image.
There is a catch though: GdkPixbuf will only scale *down* to the requested
size, no up. That is, loading a 100x100 image with a requested size of
(200, -1) will result in a 100x100 pixbuf. But as we assume that the pixbuf
size matches the requested size, the image content ends up with 200x100.
Fix this by explicitly handling the case where only one size was supplied,
and make the other dimension take the aspect ratio into account
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/525
To prevent a small gap between windows in the workspace switching
animation, we temporarily shift windows up or down by the height of the
panel. This obviously breaks the animation for fullscreen windows, those
will overlap with the ones on the other workspace since there is no
panel shown in that case.
Fix this by checking whether the old or new workspace includes a
fullscreen window and don't shift the windows if there is one.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/757https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/322
Dialog's subtitle or body could not be properly wrapped, while it's ellipsized
when the text's width doesn't exceed the container size.
Clutter text has an `ellipsize` property, however in dialog's subtitle and body
we have been setting the `ellipsize-mode` property to Pango.EllipsizeMode.NONE
that is not present in the underlying GObject.
Not being an error in javascript, gjs didn't warn us about this, while at the
same time the St.Label's default Pango.EllipsizeMode.END was used.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/922https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/531
If an actor's allocation is outdated, clutter_actor_get_allocation_box()
will queue a relayout. That's why it's advised to not use the function
unless the allocation is known to be valid (namely during paint), but
in particular not from within get_preferred_width/height vfuncs.
Using the :allocation property (which may be outdated) would be better,
but in this case we can simply delegate the request to the correct actor.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1065
We were cleaning up self._groups, but the actors for all previous
groups/layers/modes would remain attached to the aspect container,
simply hidden.
Under some circumstances this can really make the amount of actors
in the shell stage to quickly ramp up, it's not just a "leak" but
also has potential side effects on performance.
We should destroy all child actors of this._aspectContainer, except
the static ones (emoji and keypad).
While at it, fix this._groups re-initialization, as it's actually an
object, not an array.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/523
Closes?: https://gitlab.gnome.org/GNOME/mutter/issues/556
We currently assume that every location has an associated timezone.
While this is sound in the real world, in practise it depends on
whether or not libgweather can find a corresponding timezone DB
entry.
This used to be a fringe case, but has become more likely when commit
https://gitlab.gnome.org/GNOME/libgweather/commit/d7682676ac9 moved
weather stations from cities to countries - the station itself is un-
likely to have a timezone entry, and the country may be part of more
than a single timezone.
It would be good for libgweather to return a timezone for those
locations again, but we should defend against the case anyway.
We cannot tell what time it is at a particular location without
knowing the timezone, so simply filter them out.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1062
The parameters that may affect the icon on ::style-changed are more size
related than visual (we listen to icon theme changes for the latter). It
makes sense to just update the icon if the size came out different.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/524
With a high enough amount of actors, there may be enough theme nodes and
signal connections on StTheme::custom-stylesheets-changed that
g_signal_handlers_disconnect_by*() on dispose becomes expensive, this may
become a surprisingly hot spot in StWidget::style-changed.
Keep the handler ID around and use g_signal_handler_disconnect() to avoid
linear lookups for the matching func/data.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/524
The top bar handles allocating all its children itself, so there's
little value in chaining up to st_widget_allocate() and get the
default layout manager allocating all children again (and possibly
differently).
If this happens, we end up with an infinite allocation cycle with
corresponding performance penalty. Fix this by just doing and what
Shell.GenericContainer did before commit 286ffbe2b6 replaced it,
and not chain up to StWidget.
Thanks to Robert Mader for debugging the issue.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1054
On one hand, we were using a path instead of an URI on
rsvg_handle_set_base_uri(). This broke at some point in librsvg
(presumably for the best, handling paths there sounds non-standard)
leaving a blank svg (As the base image wouldn't be accessed).
On the other hand, we use this with the deprecated rsvg_handle_write()
which we should drift away from.
Using rsvg_handle_new_from_stream_sync() neatly solves both. We use
newer API based on input streams and GFiles, and it internally does
the right thing, bringing the pad OSD back to life.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/1220
Classes that are sub-classes of GObject don't use a constructor per se, so we
can't check for new.target (as this is undefined) in _init.
Then compare the current constructor name instead.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/503
Classes that are sub-classes of GObject don't use a constructor per se, so we
can't check for new.target (as this is undefined) in _init.
Then compare the current constructor name instead.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/503
Unlike regular keys that generate key events from a virtual device,
emoji keys rely on the input method to insert the character. However
as the compositor cannot inject IM events into ibus, this only works
in the shell's own entries on X11.
We shouldn't expose mostly broken functionality to the user, so limit
the feature to the wayland session.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1172
Depending on how gitlab's CI checks out gnome-shell, the shell branch
may not have a local reference like "gnome-3-32", but only a remote
one like "remotes/origin/gnome-3-32".
Consider that case as well when looking for a corresponding mutter branch.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/511
If we don't find a branch that matches the branch used in the merge
request, we currently fall back to the non-merge-request matching,
i.e. first try the current shell branch, then fall back to master.
This should work for commits to upstream branches, but not for merge
requests to a stable branch. For those, the target branch name is
a better fallback.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/509
Move the signal handlers for changed settings to be connected after the
creation of the menu items to make sure a reference to the item is set.
While it also worked fine before, this solution certainly looks cleaner.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/512
A window being unmanaged can cause the ShellApp to be removed from
the ShellAppSystem, which if we are unlucky is the app's last
reference, causing it to be disposed and freed. It would be bad if this
happened before we finished handling the signal.
Use g_signal_connect_object to ensure that a reference is held to
the ShellApp for the duration of the signal handler, delaying its
last-unref.
In particular, when a signal handler calls _shell_app_remove_window(),
there is a brief period for which ShellApp breaks the intended
invariant (see !497) that app->running_state is non-NULL if and only if
app->running_state->windows is also non-NULL (non-empty). Freeing the
ShellApp at this point would cause a crash. This seems likely to be the
root cause of <https://gitlab.gnome.org/GNOME/gnome-shell/issues/750>,
<https://gitlab.gnome.org/GNOME/gnome-shell/issues/822> and
<https://bugs.debian.org/926212>.
Signed-off-by: Simon McVittie <smcv@debian.org>
Compare painting/geometry of old and new paint nodes, so it's ensured to
be only emitted on actual style changes. Emission still must be propagated
through to children, though.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/1153
At the point it is disabled, it has got signal handlers connected but
this._workspacesView is uninitialized. This triggers:
(gnome-shell:3993): Gjs-WARNING **: 18:49:53.281: JS ERROR: Exception in callback for signal: cancel: TypeError: this._workspacesViews is undefined
_endTouchGesture@resource:///org/gnome/shell/ui/workspacesView.js:527:25
_emit@resource:///org/gnome/gjs/modules/signals.js:142:27
set enabled@resource:///org/gnome/shell/ui/windowManager.js:478:13
WorkspacesDisplay<@resource:///org/gnome/shell/ui/workspacesView.js:482:9
ViewSelector<@resource:///org/gnome/shell/ui/viewSelector.js:167:35
ControlsManager<@resource:///org/gnome/shell/ui/overviewControls.js:405:29
init@resource:///org/gnome/shell/ui/overview.js:234:26
_initializeUI@resource:///org/gnome/shell/ui/main.js:184:5
start@resource:///org/gnome/shell/ui/main.js:124:5
@<main>:1:31
On startup. Shuffling these two lines prevent this from happening.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/506
The port away from the old Shell.GenericContainer actor turned many JS
classes with a corresponding actor property into Clutter.Actor subclasses.
For compatibility reasons, those properties were kept around for a while.
They were now removed and any code that still uses them should be adjusted.
Facilitate that transition by defining the compatibility property on
Clutter.Actor itself, but log a warning every time it is accessed.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/487
- simplify the close button to use blue, lighter blue and darker blue
solid disks for normal, hover and active states
- use a milky, transparent white border for the hover effect of the border
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/461
