Due to typecasting being done when converting floats to integers in
gnome-settings-daemon, a volume of 0.9% in g-s-d will end up as 0% in
gnome-shell. This can lead to a mismatch of icons between the volume OSD
(the icon to use is determined by g-s-d itself) and the shells own
volume indicator (the icon to use is determined by the shell using the
volume received from g-s-d).
To fix this, simply get rid of the conversion from float to percentage
in g-s-d and back to floats in the shell and just send a float/double
value on DBus.
https://gitlab.gnome.org/GNOME/gnome-settings-daemon/merge_requests/78https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/385
LevelBar is not really used, all the checks are implemented inside
BarLevel as well and the accessible name is wrong because the osdWindow
doesn't only show the volume, but also the brightness and other things.
The workaround for updating the bars width is also no longer needed now
that we have BarLevel.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/385
There are some cases (for example when tweening value changes), where
the level will be set to the same value it already is at. Avoid those
unnecessary repaints by checking whether the value is already used and
returning if it is.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/385
AppIcon makes itself draggable, and handles the various DnD
routines such as 'drag-begin' and 'drag-end' by making the
Overview emit the appropriate signals.
However, when destroyed, the AppIcon does not try to finish
any drag operations that started. That causes the event
blocker in AllView not to be updated correctly when dragging
icons to outside folders.
Make AppIcon emit 'item-drag-end' when a drag operation
started and it's destroyed.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/643
For GObject properties, we follow the convention of all-lowercase,
dash-separated names. Those translate to underscores in getters/setters,
so exempt them from the newly added "camelcase" rule.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/627
While we aren't using those destructured variables, they are still useful
to document the meaning of those elements. We don't want eslint to keep
warning about them though, so mark them accordingly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/627
Those unused arguments aren't bugs - unbeknownst to eslint, they all
correspond to valid signal parameters - but they don't contribute
anything to clarity, so just remove them anyway.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/627
This was left-over in commit 2743f18af, and probably is the real reason
why the busy spinner wasn't using the shared AnimatedIcon.Spinner class:
The animation there was much slower.
Still, let's keep the code as-is for now, if we really need a different
animation time, we can add an optional constructor parameter to the
Spinner class.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/640
At the moment the only way to open a folder icon is to click on it;
there's no API to open the icon programmatically.
This commits adds an open method and makes the click handler use
it.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/628
When a FolderIcon is opened, it asks the parent view to allocate
space for it, which takes time. Eventually, the space-ready
signal is emitted on the view and the icon can make use of the new
space with its popup. If the icon gets destroyed in the
interim, though, space-ready signal handler still fires.
This commit disconnects the signal handler so it doesn't get called
on a destroyed icon.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/628
It is important that the FolderView of a FolderIcon always
gets destroyed before the AppFolderPopup, since the view
may or may not be in the popup, and the view should
get cleaned up exactly once in either case.
This commit adds a destroy handler on FolderIcon to ensure
things get taken down in the right order, and to make sure
the view isn't leaked if it's not yet part of the popup.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/628
At the moment AppFolderPopup calls popdown on destruction,
which leads to open-state-changed getting emitted after
the actor associated with the popup is destroyed.
This commit handles ungrabbing and closing from an
actor destroy handler to side-step the open-state-changed
signal.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/628
If an icon already exists in an app view with the same id, the
duplicate is not added on a call to addItem. Unfortunately,
since it's not added, the icon actor gets orphaned and leaked.
This commit address the problem by introducing a new hasItem
method and disallowing callers to call addItem with a duplicate
in the first place.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/628
meta_later_add() is modelled after g_idle_add() and friends, and
the handler's boolean return value determines whether it should
be scheduled again or removed. There are some places where we omit
the return value, add them (although the implicit return value of
"undefined" already gives us the intended result).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/637
The startup/busy indication in the app menu was left out of commit
22e21ad7d1 because it doesn't use a hard-coded image, but as the
image in the CSS is actually the same used by the spinner class,
drop the "custom" styling and use the regular spinner.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/636
Trying to disable an extension that is enabled by the session mode
currently has no effect, which is clearly confusing. We could update
the various extension UIs to reflect that via sensitivity, but being
unable to configure extensions based on which session the user picked
at login isn't obvious either.
So instead, add a 'disabled-extensions' gsettings key to list extensions
that should not be enabled which takes precedence over 'enabled-extensions'
and can be used to disable session mode extensions.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Now that extension loading and the extensions map are no longer shared
between the gnome-shell and gnome-shell-extension-prefs processes, we
can move both into the ExtensionManager which makes much more sense
conceptually.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Whether or not an extension can be enabled/disabled depends on various
factors: Whether the extension is in error state, whether user extensions
are disabled and whether the underlying GSettings keys are writable.
This is complex enough to share the logic, so add it to the extension
properties that are exposed over D-Bus.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
The existing 'ExtensionStatusChanged' signal has a fixed set of parameters,
which means we cannot add additional state without an API break. Deprecate
it in favor of a new 'ExtensionStateChanged' signal which addresses this
issue by taking the full serialized extension as parameter.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Serializing an extension for sending over D-Bus is currently done by the
appropriate D-Bus method implementations. Split out the code as utility
function and add a corresponding deserialization function, which we will
soon use when consuming the D-Bus extension API from the extension-prefs
tool.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Extensions are currently enabled or disabled by directly changing the
list in the 'enabled-extensions' GSettings key. As we will soon add
an overriding 'disabled-extensions' key as well, it makes sense to
offer explicit API for enabling/disabling to avoid duplicating the
logic.
For the corresponding D-Bus API, the methods were even mentioned in
the GSettings schema, albeit unimplemented until now.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
While public methods to enable/disable extensions make sense for an
extension manager, the existing ones are only used internally. Make
them private and rename them, so that we can re-use the current
names for more useful public methods.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
The extension system started out as a set of simple functions, but
gained more state later, and even some hacks to emit signals without
having an object to emit them on.
There is no good reason for that weirdness, so rather than imitating an
object, wrap the existing system into a real ExtensionManager object.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
It makes sense to keep extension-related enums in the same module instead
of spreading them between ExtensionSystem and ExtensionUtils.
More importantly, this will make the type available to the extensions-prefs
tool (which runs in a different process and therefore only has access to
a limited set of modules).
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Commit bd18313d12 changed to a new naming scheme for battery icons,
and used to old icon names as fallback-icon-name for compatibility
with older/other icon themes.
However that fallback code isn't working correctly, as GThemedIcon's
default fallbacks will transform a name of `battery-level-90-symbolic`
to a list of names:
- `battery-level-90-symbolic`
- `battery-level-symbolic`
- `battery-symbolic`
The last one frequently exists, so instead of the intended fallback,
we end up with a generic battery icon.
Address this by specifying the icon as GIcon instead of an icon-name,
where we have more control over how the icon is resolved.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1442
Just as we did for the workspace switcher popup, support workspaces
being laid out in a single row in the window picker.
Note that this takes care of the various workspace switch actions in
the overview (scrolling, panning, touch(pad) gestures) as well as the
switch animation, but not of the overview's workspace switcher component.
There are currently no plans to support other layouts there, as the
component is inherently vertical (in fact, it was the whole reason for
switching the layout in the first place).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/575
While mutter supports a variety of different grid layouts (n columns/rows,
growing vertically or horizontally from any of the four corners), we
hardcode a fixed vertical layout of a single column.
Now that mutter exposes the actual layout to us, add support for a more
traditional horizontal layout as well.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/575
In some cases the style-changed signal hasn't been emitted when
_computeLayout() is called, resulting in the use of the default spacing
and item size values for the calculations.
One case where this happens is when starting a search. Right after the
initialization of GridSearchResults, _computeLayout() is called from
_getMaxDisplayedResults() and the style-changed signal hasn't been
emitted yet. The computed layout will be wrong and the maximum
number of results will also be wrong.
To prevent this from happening, make sure the style has been updated
before doing the calculations in _computeLayout().
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/110
The calculation of how many results can be shown in GridSearchResults is
broken: The width of the parent container (resultsView.actor) we're
using as the maximum width right now is the width of the scrollView of
SearchResults (which always expands to the whole screen size). This
width will only be correct if the scrollView (ie. the whole screen) is
smaller than the max width of searchResultsContent, which only is the
case for screens smaller than 1000px.
To fix the calculation, use the width of our own actor and don't get it
using clutter_actor_get_width(), but using the last allocation of the
actor. This way we don't get the preferred width if the actor is not
allocated at this point (it's hidden by _ensureProviderDisplay() when
starting a new search).
Then, when the allocation of the actor changes, rebuild the grid search
results by calling updateSearch() with the old arguments to ensure the
number of visible results is correct. The fact that we're only listening
for allocation changes here is the reason why we never want to use the
preferred width of the actor inside _getMaxDisplayedResults(): While
the actor is hidden clutter_actor_get_width() would return the preferred
width, which we'd then use the as the maximum width. But if the actor
had a correct allocation before, no notify::allocation signal will be
emitted when the actor is shown again because the allocation is still
the same, and we'll end up using the preferred width as maximium width
forever.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/110
The functionality the searchResultsBin container provides can easily be
moved into a subclass of St.BoxLayout, no need for an additional StBin.
The "searchResultsBin" css class isn't used in the stylesheets either.
Same with the scrollChild container.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/110
