Along the lines of `styleSheetName`, a session mode may want to provide its
own gresource file, so make this possible via a `themeResourceName` session
mode parameter, defaulted to gnome-shell-theme.gresource
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1063
Unlike any other methods in the Extensions API, LaunchExtensionPrefs()
opens what appears to be an application dialog, except that it is
really a separate application that the caller has no control over.
In order to address that, add a new OpenExtensionPrefs() method that
takes additional parameters (modelled after the desktop portal APIs)
that will make it possible to improve the behavior in the future.
The new parameters are ignored for now, but pushing the API out now
will allow us to fill in the functionality post the .0 release.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1074
The 'disable-user-extensions' GSettings key is the last extensions-related
setting that isn't exposed over D-Bus, and therefore requires consumers
to access the GSettings directly.
Expose the setting as UserExtensionsEnabled readwrite property in the
org.gnome.Shell.Extensions interface to allow consumers to manage
extensions purely via D-Bus.
The 'disable-user-extensions' setting is the last extension-related
bit from the org.gnome.shell GSettings schema that is not exposed
via D-Bus.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1074
Currently, a failure to start the Systemd unit `gsd-xsettings.target`
would be considered a failure to start Xwayland.
That means that if `gsd-xsettings.target` fails to start for whatever
reason, no X11 client can be used on Wayland.
However, XSettings is by no mean mandatory for X11 clients and many
legacy X11 clients do not implement XSettings. Those who do always have
a fallback path and therefore can still work without XSettings.
Make a failure to start the Systemd unit `gsd-xsettings.target` non
blocking for Xwayland, and just log a warning message.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1065
We ended up always showing the switch-user button on the lock screen,
as showing and hiding it with the prompt was too visually distracting.
But now that we have a fancy transition in place, we can easily extend
it to the switch-user button as well.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1029
We only call _updateSensitivity() to make elements sensitive, and
nothing ever touches the sensitivity of the switch-user button; so
just call the corresponding authPrompt method directly, which is the
only bit that has an actual effect.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1029
We do spawn gsd-xsettings, and watch its name before notifying on the
given task, so the mutter bits can proceed with X11 startup.
One notable change is that we only start gsd-xsettings, instead of the
generic gnome-session-x11-services target. We do so as we have to wait
on a dbus name to appear in order to deem the initialization done, and
making it all depend on gsd-xsettings seems tidier.
Less notably, we also use ::shutdown-xserver to shutdown the related
services. Its major benefit is that it'd allow us to ensure the olderly
shutdown of those services, but it's unused at the moment.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/836
When a window is being resized by the compositor, with Wayland the
compositor first asks the window to change its size and emits the
"size-change" signal, and then emits the "size-changed" signal after
the window acknowledges the new size. To show a fancy resize animation,
gnome-shell creates a "screenshot" of the resizing window on the
"size-change" signal, and later animates that "screenshot" to the new
window size on the "size-changed" signal.
Now if a client is not responding to our requests asking it to change
its size, we get a "size-change" signal and start showing the
window-clone, but never a "size-changed" signal, animating and hiding
the clone again. This causes a so called "ghost window" that is shown
above everything else and never disappears again.
To fix that, start showing the window clone once we get the
"size-changed" signal instead of the "size-change" signal. This makes
sure the window actually updates its size and the clone is going to be
hidden again.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/1078https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1055
Creating a new GTimeZone for the local timezone can be quite expensive if
done repeatedly. It requires an open(), mmap(), and parsing of
/etc/localtime.
This patch was provided by Florian, and I've tested it as far back as
3.28.4 to ensure that we are really reducing the number of open() calls
on the compositor thread.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1051
Signed-off-by: Christian Hergert <chergert@redhat.com>
The thumbnails actor `this._thumbnails` has already been destroyed when
calling `_destroyThumbnails()` from the `destroy` signal handler because
it is a child actor of the AppSwitcherPopup. So stop destroying the
thumbnails separately (fading them out inside a destroy handler wouldn't
make sense anyway).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/167
The correct property for the scroll-direction with scrolling events is
`direction`, no `scroll_direction`. This fixes scrolling in the alt-tab
popup, which broke with the actorization changes.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/167
When the switcherPopup was initiated successfully, we return true,
otherwise the WindowManager will try to destroy it. Since an early
release of the keystroke will also switch to another application and
close the switcher just fine, we should return true to indicate success
here.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/167
Right now the index that gets selected on click and motion events is set
when connecting the event inside the addItem function. If items are
added or removed (for example when an application is closed by pressing
"q"), this index isn't valid anymore and has to be updated.
To fix this, use the items themselves instead of the index as arguments
for the event handlers and lookup the index of the item inside the event
handler.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/167
Set the accessible states of the switcherList items by calling a
function instead of manipulating class-internal variables from outside
the class, which is considered bad practice.
The check whether the item at `_selectedIndex` exists can also be
removed since we always select a new index after an item was removed
(i.e. an app was closed) and destroy the alt-tab switcher right away if
no more items exist (see `SwitcherPopup._itemRemovedHandler`).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/167
Limit the minimum and maximum value to scroll to inside the box to 0 and
the upper limit, for some reason this was done right in _scrollToRight,
but not in _scrollToLeft.
This fixes the behavior of scrolling to the left: Before, scrolling one
item to the left moved the view to the first element of the list (this
can make the selected element invisible in large lists). Instead, scroll
one item to the left, just like scrolling to the right works.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/167
Make sure the index that's being scrolled to doesn't change while the
scrolling animation is running by using an argument instead of the
this._highlighed class scope variable.
This fixes wrongly shown arrows when selecting new elements faster than
the scrolling animation takes for one index. The check run to disable
the arrow might be checking against a newer index than the one at the
start of the animation which results in the arrow not getting hidden
even if no more scrolling is possible.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/167
Since this._highlighted is always set to the currently highlighted
index, there's no need to save the index to a separate variable. This
obviously depends on getting the new item highlighted as a result of the
item-entered event.
This fixes bugs in situations where the highlighted element changes
after an event that is not calling _onItemEnter, for example after
scrolling or pressing a key. In those cases the _currentItemEntered
variable wouldn't be updated and the old item couldn't be entered
anymore without entering another one before.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/167
The 'gdm' user is not going to run a media player, so there is no
point in allowing the corresponding section on the login screen.
All other sections are already disabled, so this is the only reason why
we end up with the message list instead of only showing the calendar.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2241
This reverts commit c0c027c608. Because for
some reason animating external opacity and position is still incurring
internal repaints, which disables offscreening and makes fading of
overlapping actors look wrong. `ON_IDLE` should be fixed in mutter before
it is used (in boxpointer at least) again.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/2270
If the sessionMode does not allow to show the overview, we should also
hide an already visible overview.
This fixes a bug where, if the lockscreen was shown while the overview
was visible, the Ctrl+Alt+Tab popup would allow navigating inside the
overview because the overview actor is still mapped.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1043
If a transition is reversed, the final property values will be the
same as before the transition. However this currently only works
correctly when we actually use a transition; to fix this with a
duration of 0, simply skip the set() call when the transition is
reversed.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1042
While the unread messages indicator is updated when starting a new
session because we call _onSourceAdded() on existing sources, we should
also update the do-not-disturb setting which might still be enabled.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1037
We turned both the auth prompt's cancel button and the switch user
button into icon buttons now, which means they are completely cryptic
when using a screen reader.
Just use the previously used labels as accessible names, which has the
nice side effect of lowering the impact of the string freeze break.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2210
Since commit mutter/a2a8f0cda we force the focus surface of the
meta-wayland-pointer to NULL while the pointer is hidden. This
introduced an issue with the magnifier, where we use
`set_pointer_visible` to hide the real cursor and show our own cursor at
the correct position: Because the meta-wayland-pointer is still used to
communicate with Wayland clients, the UI of the windows will not respond
to mouse movement anymore as soon as the real cursor is hidden.
To fix this, use the newly added clutter_seat_inhibit_unfocus() API to
temporarily disable unsetting the focus-surface while the magnifier is
hiding the system cursor.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/993
If we are transitioning the label from 0 to its natural height, we
must set natural-height-set again after querying the preferred height,
otherwise Clutter would skip the transition.
However when transitioning in the opposite direction, setting the
property to true can go horribly wrong:
If the actor hasn't been allocated before, it will store a fixed
natural height of 0. But as there is no fixed min-height, we can
end up with min-height > natural-height, which is a fatal error.
(This isn't an issue when *actually* setting a fixed height, as
that will set both natural and minimum height)
So instead of always setting natural-height-set to true, restore
its previous value to fix the issue.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2255
Now that we apply a strong blur effect to the background, it doesn't
make too much sense to use a separate lock-screen background: It will
be mostly unrecognizable anyway.
The alternative would be to turn off the blur effect if a different
background is used (or have a hidden setting for that), but that would
then imply that we must keep the contents readable without blur.
Let's avoid that rabbit hole and just re-use the regular background.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1001
To bypass offscreening in cases where continuous animation is happening.
Offscreening is slower in such cases so this reduces the render time of
animations within offscreenable actors.
On an i7-7700 this reduces the render time of boxpointers for example by
25-30%.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1025
`-slider-handle-radius` is a floating point value and even in the default
theme it's not a whole number. Regardless of the fractional part that's
still going to occupy a whole extra pixel with antialiasing. So make room
for it. Otherwise it looks clipped, which it is by the Cairo context of
its `StDrawingArea`.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1569
Unused at the moment, but add the plumbing so that default key
definitions may specify symbolic icons that will be shown instead
of the text.
This is intended to replace the use of CSS and background-image
to handle those buttons with an icon.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2214
For reasons not yet fully understood, `Main.uiGroup.add_actor` takes around
10 milliseconds to complete.
Because of this, each `actor.opacity = 0` has a good chance of falling
on a different frame. And when it does, `_opacityChangedId` also lands
on multiple different frames each incurring a separate relayout cycle.
It is this excessive number of relayouts that causes stuttering in the
icon grid animation (#2065). But it is the slowness of `uiGroup.add_actor`
that causes the number to be excessive when it should be one.
By creating the clones and adding them to `uiGroup` early, we then enable
the existing loop starting the animation to complete within a single frame.
And by completing within a single frame all the opacity changes land within
the same frame interval, thus incurring only a single relayout instead of
many.
This issue went unnoticed until 004a5e1042 (!704), after which the slow
emissions of `notify::opacity` became a more visible performance problem.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/2065https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1002
Now that the bind constraint changes the preferred size of
the actor, a major flaw in the AppDisplay code was exposed:
the folder dialog depends on the preferred size of a parent,
and the parent depends on the preferred size of the folder
dialog.
While we know this is not actually true, we shouldn't rely
on broken behavior to achieve this result. What's interesting
is that the bind constraint used by the folder dialog is a
relic of the development phase; we now control the position
and size of the dialog with a combination of CSS, and alignment.
Remove the unnecessary bind constraint.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1027
Since the design of the notification popup changed with the theme
refactor and there are now boxes around the world-clock and weather
sections, the overlay scrollbar that is shown above them looks rather
bad. So simply hide that scrollbar, we still have the vfade effect to
indicate the container is scrollable and we also depend on that in the
new popup app-folders.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1013
Make sure the stylesheet properties of the window-chrome title are
updated before requesting the preferred width of the title to prevent
size changes of the title after we animated the width.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/58
Remove the default icon size of -1 and always set the container StBin to
a real size. This fixes an error where the "width" and "height"
properties get set to -2 (which is -1 * scaleFactor) in the `_init`
function.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1018
To make sure the GC really disposes the KeyboardController object we
need to remove all references to the object, which means we have to
disconnect signals the object connects to, too.
This also fixes a bug where keys remain pressed forever and thus also
break that key on real keyboards. It happens if the OSK gets destroyed
during an OSK-key is being held so the StButton of the key is not
released. That means the key remains pressed in the
MetaVirtualInputDevice that we are now leaking because
KeyboardController isn't garbage collected.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1015
xgettext gained some support for template strings, and no longer
fails when encountering '/' somewhere between backticks.
Unfortunately its support is still buggy as hell, and it is now
silently dropping translatable strings, yay. I hate making the
code worse, but until xgettext really gets its shit together,
the only viable way forward seems to be to not use template
strings in any files listed in POTFILES.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1014
Since quite a few strings of dialogs provided by external programs are
not updated yet and the string freeze is already in effect, make sure we
don't break those dialogs by stripping aways large parts of the
headline.
To do that, detect if the title label is larger than the available width
and if it is, switch to a smaller font-size of 13pt. This makes sure we
still show about the same number of characters in the headline as we did
in previous releases.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1012
With the old screen shield, we were simply hiding the lightboxes to show
the shield when the user became active after activating the shield but
before locking the screen (that is, when using a lock-delay).
However now that the shield is gone, we end up showing the unlock dialog
even though we are not actually locked.
We probably don't want to add back a shield-like mode (that is, a way to
raise the unlock dialog without authentication when we aren't locked),
so just deactivate the whole shield when the user becomes active again
before the lock kicks in.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2213
The design team discussed the ellipses at the end of the hint text of
our entries and, even though they are present in most mockups, it turned
out they don't like them, so remove them.
It also turned out they don't like the prefixes like "Enter" before it,
so remove those, too.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/977
With the new dialog design the descriptions of entries are now
implemented as hint-text of the StEntry. That means the colon at the end
of the descriptions no longer makes sense and should be removed.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/977
Currently separators get all the padding from regular menu items,
which is excessive for non-interactive elements.
Shuffle style classes around a bit to allow overriding the normal
padding for separators.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1004
Shift, caps-lock and friends change the capitalization of following
key presses. It is unexpected for those keys to have side-effects,
so don't switch to the prompt when they are pressed.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2215
The promptBox is initially fully opaque, so showing it before the
transition can result in a brief flash before fading in.
Just remove the show() call and let the transition handle the
visibility.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2212
In the common case where we only have a single unread notification
from a particular app, the count doesn't add useful information.
Reduce clutter a bit by only showing the notification count if we
have at least two.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/997
Clicking or typing to reveal the auth prompt are good options for
mouse/keyboard workflows, but awkward on touch devices. Now that
we have SwipeTracker, adding corresponding gestures support is
easy, so do just that.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/972
The current transition between clock and auth prompt uses a simple
crossfade.
"What kind of spatial model is that?!"
T.B.
Root the transition a bit more by adding translation and scale to
the animation.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/972
Currently, when a null user is passed, we don't add any
username label. That makes the layout of user and no-user
cases inconsistent.
Add a ghost label with no opacity to mimic the username
label.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/922
If username-based login flow is followed, we need a default avatar
for the userWidget. Hence, check if the user passed to userWidget
is (null) which implies a username-based login flow.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/922
Allow vertical orientation for the userWidget so that the user-avatar
can be centered and user's name can be placed below it. The plan
for 3.36 is to use this vertical userWidget layout for both lock
and login screen.
The userWidget is also used while creating the user-selection list
at the login, hence we still need to keep the horizontal layout
for userWidget in place.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/922
Since the blur sigma decides how many pixels get factored in when
blurring and setting a scale factor increases the background texture by
that factor, the sigma value should also be multiplied by the scale
factor.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/991
There is nothing else to be focused in the lock screen itself -- the
top bar is already handled elsewhere, and the dialog manages itself
now.
Remove the lock screen group from the Ctrl-Alt-Tab manager.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/872
AuthPrompt is the set of actors that contain the user avatar,
the username, and the password entry. With the removal of the
screen shield, the unlock dialog (be it UnlockDialog or the
LoginDialog) is always created, and in the case of UnlockDialog,
so is the auth prompt.
This is problematic, though, since for passwordless accounts,
the simple act of creating AuthPrompt authenticates the user,
and lifts the lock screen.
Create the AuthPrompt on demand in UnlockDialog.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/872
As per the latest lock screen mockups, critical notifications must have
a more prominent, solid color.
Add a .critical style class to critical notification bubbles, and make
them darker.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/872
Now that the screen shield is gone (at least, as it used to
be), the corresponding session mode is not necessary anymore
as well.
Remove the 'lock-screen' session mode, and the corresponding
CSS.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/872
Pretty much what the commit title says.
This gives the lock shield actor another role: instead of
being the interactive screen shield, make it the invisible
actor that prevents interacting with windows while the
unlock dialog is sliding down.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/872
Activating a dialog is slightly different from opening it; the
former is about showing the user authentication widgetry, while
the latter is about creating it and pre-allocating the necessary
resources.
Activate the screen shield dialog when necessary.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/872
The 'onPrimary' argument was being passed to dialog.open(). Turns out,
neither UnlockDialog nor LoginDialog use this parameter.
Remove the unnecessary 'onPrimary' parameter, and cleanup the related
code.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/872
The use of the core idle monitor means that focus change events
are also delayed by keyboard interaction. Since the magnifier is
already in the business of pointer tracking, it's easy enough to
fire the pointer rest timeout from here, so focus changes are
accumulated and delayed.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/984
We may get several a11y events setting the caret on the same
coordinates it previously was. Make focus tracking ignore those,
as we're jumping to the same coordinates again during eg. mouse
operation.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/984
If the crosshair is clipped so it doesn't cover the pointer cursor,
the clip rectangle is skewed towards the bottom/right. This was
made so to accomodate the default pointer, but the unevenness stays
on other pointer cursors, and it makes the crosshair look odd on
short crosshair length.
Make all lines clip to an even distance from the center instead.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/984
It is somewhat unexpected that crosshair color and pointer cursor colors
remain the same across changes in color inversion settings, and may lead
to contrast issues. Apply the effect on the common container, so it
applies to these all.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/984
If the icon proper has opacity of zero then that's probably because a
clone of it is animating. So avoid animating the source actor too.
And if there's any other reason for the opacity being zero, still don't
animate it because we can't see it :)
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/2167
So as to guarantee the unmapped state sticks and doesn't get toggled
back to mapped before we return.
Being in a mapped state when `FolderIcon.vfunc_unmap()` returned was
causing an assertion failure in `clutter_actor_set_mapped` and crashed
the shell.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/2170
Commit 147a743d8d moved the suspend and power-off actions into
the submenu that contains the log-out and switch-user actions,
but did not update the submenu visibility logic to account for
the additional actions.
As a result, the submenu is hidden when log-out and switch-user
are unavailable (like on the login screen), even if suspend and
power-off are enabled.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2169
Now that we can download, apply and display extension updates, it is time
to actually check for updates. Schedule an update check right on startup,
then every 24 hours.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1968
If all password entries in dialogs are hidden, there is either an entry
that has visible characters or no entry at all. That means we don't have
to show the caps lock warning at all, so hide it.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/942
Since the headlines of the dialogs now use a much larger font, the
strings need to be shorter so they won't be ellipsized. So use a shorter
strings for those titles and also adjust the title-strings of the
notifications sent by the NetworkAgent to be consistent.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/942
Since the caps-lock warning adds a lot of spacing to dialogs and the
lock screen, hide it by default and only show it when necessary. To make
the transition smooth instead of just showing the label, animate it in
using the height and opacity.
Also add some bottom padding to the label so we can show or hide that
padding, too.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/952
The caps-lock warning is more related to entries than dialogs and is
also used in gdm, which is not realated to dialogs at all. Rename the
css class to caps-lock-warning-label and move it to the entry
stylesheet.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/952
The Animation class inherits from St.Bin and manages the scale factor
in the image loading, but the widget size doesn't change and doesn't
depend on the scale factor so when the scale factor is different
from 1 the widget size doesn't match the image size.
This patch resizes the Animation widget using the scale factor so the
widget will match the animation images sizes.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1746
Now that we have a way to check for updates and download them, we
should actually apply them as well. Do this on startup before any
extensions are initialized, to make sure we don't run into any
conflicts with a previously loaded version.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/945
While it is possible that an extension has a newer version available
than the previously downloaded update, it's more likely that we end up
downloading the same archive again. That would be a bit silly despite
the usually small size, so we can either use the metadata from the
update, or exclude the extension from the check.
The latter is much easier, so let's go with that for now.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/945
Currently the method installs updates instead of merely checking for
them (or it would do, if it actually worked).
This is not just surprising considering the method name, the whole idea
of live updates is problematic and will not work properly more often
than not:
- imports are cached, so any local modules will stay at their
original version until a shell restart
- GTypes cannot be unregistered
So change the method to only download available updates, and set the
extensions' hasUpdate state accordingly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/945
The current support for extension updates is half-baked at best.
We are about to change that, and implement offline updates similar
to gnome-software.
As a first step, add a hasUpdate property to the extension state
which will communicate available updates.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/945
Since a11f417cd0, both drag and scroll
gestures are added to Main.layoutManager.overviewGroup actor, while
previously drag gesture was added to Main.overview._backgroundGroup
instead. Since we cannot use 2 different actors for dragging and scrolling
anymore. just disable the swipe tracker while dragging a window.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2151
Since the orientation lock menu entry is a proper menu entry instead of
a icon-only button now, we also show a description-text for that entry,
so update this text depending on whether orientation is locked or not to
better reflect what clicking the menu entry will do.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/964
Since we don't really know what the buttons we're adding to the dialogs
are about, we can't configure a button to "be clicked" when the escape
key is pressed. So add a separate escape key handler to fix that, return
-1 and abort the request.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/961
When updating the buttons of the mount dialogs, compare the new buttons
to the old ones and only create new buttons in case something changed.
This makes sure key focus isn't reset or lost unnecessarily while a
dialog is opened.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/961
Since there is a generic layout for dialogs like that now, use it. Also
remove the functionality of focussing a window when clicking a list
item, it's not discoverable at all and pretty unexpected.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/961
On Wayland, the display server is the Wayland compositor, i.e.
`gnome-shell` itself.
As a result, we cannot spawn `gnome-shell-perf-helper` before
`gnome-shell` is started, as `gnome-shell-perf-helper` needs to connect
to the display server.
So, instead of spawning `gnome-shell-perf-helper` from the perf tool,
start it from `gnome-shell` itself.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/941
When do-not-disturb is enabled, non-critical notifications will not
be shown as banners. It therefore makes sense to indicate that state
to the user, so they don't accidentally miss notifications.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/239
Currently the indicator pad requests a size of 0x0 if the corresponding
indicator is hidden. Right now this is enough to balance out the indicator,
but it won't be when we add spacing to the parent container.
Properly hide the pad with the indicator to avoid that issue.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/239
We've had the ability to temporarily disable notification banners
all the way back to 3.0, but we stopped exposing it in the UI with
the 3.16 notification redesign. With the message list being more
concise nowadays and the "Clear" button reduced to a single icon,
we now have space for a "Do Not Disturb" switch again.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/239
We try to make the OSK 1/3rd as big as the monitor. On landscape
layouts we usually get away with it as there's plenty of horizontal
space to enlarge the OSK while keeping the OSK aspect ratio.
In portrait layout, the horizontal space is a lot more scarce so
it means we'll still have plenty of space after making the OSK as
wide as it can possibly be, which will look as odd blank space in
the OSK panel.
In order to fix this, let the OSK panel height be less than 1/3rd
the monitor size if we are dealing with portrait layouts.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/2132
It will happen before next map anyway, and most notably at times
actor sizes produce correct results.
Fixes oddities in emoji pager visibility after showing the emoji
panel, moving to another page, and hiding the OSK with the downward
arrow button. The next time the emoji panel would be shown, panels
had a chance to remain invisible.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/943
It is already scheduled to be set on first map. Doing so here triggers
size and theme node checks the actor tree is not ready for, as the
toplevel actor is not yet attached to the stage.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/943
This functionality always suffered from discoveribility
problems, and now that the folder dialog can rename the
app folders, there's just no reason to keep it.
Remove the rename popup.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/896
Now that the folder dialog handles the adaptToSize workaround,
there is no need to propagate the call throughout the class
hierarchy.
Remove the propagating calls to adaptToSize, and all the satellite
code.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/896
Now the the folder popup behaves like a dialog, it must be
above the app grid, and not be affected by the scroll view
translation.
Add the folder popup to the AllView itself, instead of the
internal Shell.Stack that is inside the scroll view.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/896
Make the AppFolderPopup behave much more like a dialog than a
popup itself. To do that, remove the BoxPointer and replace it
by a StBoxLayout. The dialog is is also bind-constrained to the
view selector.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/896
Since the overview search results now have a dark background layer, we
can brighten the background image a bit again. As a factor we use 0.5,
since that ensures the texts in the IconGrid are still readable and the
background image is visible, too.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/2133
If a new SwitcherPopup is created and there are no windows or apps to
switch through found, instead of returning from _init(), still
initialize the SwitcherPopup and let the check in SwitcherPopup.show()
return false to terminate the popup.
In both cases, with or without the return statements,
WindowManager._startSwitcher() will call SwicherPopup.destroy(), which
will try to disconnect signal handlers, destroy actors etc. Now if the
constructor can't finish creating the popup, some of the functions
called from _onDestroy() will fail and throw errors.
One of those cases is when window-switcher is limited to the current
workspace, and a WindowCyclerPopup is initiated on an empty workspace.
Because this._highlight hasn't been created, _onDestroy() will fail when
trying to destroy the actor of this._highlight.
Also, the actor of this._switcherList will not get destroyed in case
show() returns because this._items is empty. For example, this will
happen when a new AppSwitcherPopup is initialized with at least 1
running app, but 0 windows on the active workspace.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/168
When pressing the menu key to show the popupMenu inside a ShellEntry,
the menu is currently aligned with the end of the entered text, this
causes a bug in case the text is overflowing the width of the entry: The
menu will be shown outside of the entry field, because it's aligned with
the (invisible) end of the text.
Fix that by simply aligning the popup menu with the cursor of the entry,
which is a behavior that makes sense when pressing the menu-key anyway.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/934
`MessageDialogContent.messageBox` is not really needed and was only
needed to show icons, which is now no longer supported. The styling can
also be done using other CSS classes and this makes it a bit more
straightforward to add actors to the MessageDialogContent.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/886
Since MessageDialogContent.messageBox is going to be removed in a
subsequent commit, move the parts where it's used out of messageBox and
into the contentLayout instead. This will introduce wrong spacings in
some dialogs, which we're going to fix when implementing the redesigned
individual dialogs.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/886
Since the last commit we set the gicon property of StIcon to NULL if an
empty string was given when setting the icon name, this means
`st_icon_get_icon_name()` will return NULL instead of an empty string.
When `getIndicatorIcon()` returns an empty string, the icon_name
property will now be set to NULL, so compare it to NULL here.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/888
Animating the icon spring using the `translation-x/y` properties instead
of the `x/y` properties avoids relayouts. There are still other non-icon
actors moving, but it's a big improvement.
Before: 595 relayouts per spring
After: 94 relayouts per spring
Reducing relayouts reduces reallocation, which reduces CPU-intensive
JavaScript execution.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/926
String.prototype.substr() doesn't support a negative length value
(to subtract from the full length), so we end up with a filename
of '' when hitting that code paths (a relative filename with '.png'
suffix).
Fix this by switching to String.prototype.replace() instead.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2091
Replace existing panning and touchpad scrolling by SwipeTracker.
Since SwipeTracker only references one actor, redirect scroll events
from page indicators to the main scroll view.
Change programmatic scroll animation to use easeOutCubic interpolator
to match the gesture.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/826
Add a unified swipe tracker supporting dragging, four-finger swipe on both
touchscreen and touchpad, and touchpad scrolling.
The shared logic is largely same as the one in WebKit and libhandy.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/826
Commit 24e631ffe2 changed the shield animation to use translation
instead of position.
However once the shield is raised, only an animation will lower it
again, which means the shield is missing when it's supposed to be
shown without animation (for example after an idle blank).
Fix this by resetting the translation-y property in that case.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/927
Together with the forecast icon, the temperature label is the most
important information in the weather section. To emphasize it more,
reduce its space requirement by removing the temperature unit, then
make the text bold.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1143
Since commit 90a08ba0b6, we only open a network secret dialog immediately
in response to user action, and show a notification otherwise.
While for the actual request VPNs are handled separately from other connections,
this isn't true when we show the notification - we need to handle 'vpn' together
with the other types there, or we fall through to the default 'invalid type'
exception.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2008
Now that both ThumbnailsBox and WorkspacesDisplay use single adjustments for
controlling indicator and scrolling, create the adjustment in OverviewControls
and pass it to both objects, effectively syncing indicator to scrolling.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/821
Instead of having a scroll adjustment in each WorkspacesView, and using the
one from primary screen in WorkspacesDisplay, have just one adjustment in
WorkspacesDisplay, and sync the changes between WorkspacesView.
This will allow to share the adjustment between WorkspacesDisplay and
ThumbnailsBox in the next commits.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/821
Instead of using the 'y', which queues a full relayout and
thus forces effects to be reapplied, use the 'translation_y'
property, that doesn't force relayouts and allows a future
blur effect to actually use the cached framebuffers a lot more.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/864
In an earlier iteration of the ease patch set, animatable properties
and easing parameters were different arguments.
This wasn't the case in the final version, so remove the left-overs.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/917
We don't want the icon to fill extra space, so set the alignment
accordingly. Otherwise we get an unexpected result when adding
a background just to the icon part (as far as I can tell: just
system-action-icon).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/909
The screenshot code has a fair bit of nested callbacks, which means
that it is a good use case for async functions and Promises.
Most code uses GIO's async pattern, which means it can be easily turned
into promises with Gio._promisify(); first handle the couple of cases
that need custom code though, starting with SelectArea.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/903
Some GrabHelper uses are in the form:
doPreGrabStuff();
this._grabHelper.grab({
onUngrab: () => {
undoPreGrabStuff();
},
});
A promise-based variant allows to write this more cleanly as:
doPreGrabStuff();
await this._grabHelper.grabAsync();
undoPreGrabStuff();
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/903
We currently handle the case where the indicator itself is disabled
(read: hidden), but not when the entire top bar is invisible (for
instance when the primary monitor is in fullscreen state).
It is odd to pop up a top bar menu without the top bar, so check for
the indicator's mapped- instead of visible state.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2002
Use the new StPasswordEntry for password entry fields
and remove all direct handling of clutter text of the entry
via clutter_text_set_password_char to show/hide the password
text. StPasswordEntry will provides a peek-password-icon which
will allow to show/hide the password present in the field to
the user in subsequent commits.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/619
shellEntry should not need to query the clutter-text directly
in order to know if the entry is for passport-input purpose.
shellEntry can easily determine a password-entry by querying
if it is an instance of StPasswordEntry and use it's API
whereever relevant.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/619
This is necessary to make DnD operations work from tablet devices on
wayland, as it's not the same onscreen pointer sprite than mice. Fixes
window DnD in the overview on tablet devices, no longer having them stick
to the wrong pointer.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/897
Just like switcher popups, popup menus don't play well together with
system modals, and generally have a lower priority. So just like
switcher popups, close popup menus when a system modal dialog pops
up.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1536
As system modal dialogs may open without user interaction (for instance
polkit or network agent requests), it is possible for them to pop up
while the app/window switcher is up.
The current result of having both up simultaneously is clearly broken,
so we can either dismiss the popup or prevent the modal dialog from
opening. Assume that the dialog indicates a more important action and
should therefore take precedence, so go with the former.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1536
Since both the `_items` object and the `_allItems` array include the
same items, the difference between those variables seems unclear. The
real difference between them (except the different data type) is that
`_allItems` is ordered in the same order as the visible grid, so rename
`_allItems` to `_orderedItems` which makes that more obvious.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/799
The icon grid currently sorts icons by their names. When creating new
folders, the folder may end up being in a different page, and that's
confusing since we don't actually move to where the new folder is.
Move the icon grid to the newly created folder.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/883
We want extended keys to have the same size as their parent key,
but this is currently broken and the keys end up with their
parent key's preferred size (which is smaller than its allocated
size).
This is due to the way ClutterActor's width/height properties work,
which only return the "real" (i.e. allocated) size when the allocation
is valid, and fall back to the preferred size otherwise.
As changing an StWidget's hover state involves adding or removing
the `:hover` pseudo class, this is currently always the case.
Creating the extended keys first means the keyButton's allocation
is probably valid, so do that.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1976
Mutter and Clutter was changed to pass around the current target
framebuffer via the paint context instead of via the deprecated Cogl
framebuffer stack.
The framebuffer stack has also been removed from Cogl so change to use
the one in the paint context instead.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/827
While still leaving them unused, pass around ClutterPaintContext and
ClutterPickContext when painting and picking.
The reason for splitting this change up in two is to make it possible to
bisect easier in between the API change and the change to using the
framebuffer passed around with the temporary contexts.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/827
When commit c6cea277e replaced Shell.GenericContainer, the check
whether the required width exceeds the avilable width was changed
from using the minimum widths of items to the natural width of the
scroll view.
That doesn't work correctly, as the *natural* width may well exceed
the actually used width: SwitcherList bases its width request on
children's minimum sizes to force labels to ellipsize.
Fix this by using the minimum width of the scroll view's child instead.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1834
It is true that delete is a javascript keyword, but that doesn't
prevent it from being used as method name - there are event built-in
types like Map or Set with delete() methods!
So if that hack was ever needed, this hasn't been the case for years
now; just removed the hack now.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/862
When the extension system is loaded, create the
gnome-shell-disable-extensions file in the users runtime directory. This
file is automatically removed 60s later. The sole purpose of this file
is to be consumed by the systemd units. If the file exists, the systemd
units will disable extensions when the gnome-shell fails.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/858
Since the notification message close button had no border, or mouse
over effect, there was no way to determine whether the mouse cursor
were over the button.
Improve this by adding a message-close-button class for the close
button, and a styling for its hovered state, based on media control
button styling.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/855
Currently when dragging an icon to the space above or below the appGrid
to switch pages, we do so very quickly without checking when the last
page-switch happened. This makes it hard to move icons to pages which
are not the first or the last one, since the other pages are skipped
very quickly.
To fix this, add a timeout of 1 second that blocks switching pages after
a page-switch using drag overshoot occured.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1693
We currently always switch app pages when a dragged app icon
moves outside the grid boundaries, regardless of any previous
page switches. This makes it too easy to switch multiple pages
accidentally, so add a small threshold that the icon has to
move back towards the grid before allowing another page switch.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1693
There's no need for a `inhibitEventBlocker` interface. Since we connect
to "open-state-changed" of our folders in the AllView anyway, we can
just make the event blocker visible while a folder is opened, and hide
the event blocker during DnD.
This allows keeping the eventBlocker reactive at all times and fixes an
issue where DnD to create a new folder is impossible if no folders are
present because the eventBlocker would not get inhibited.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1652
Emitting ::drag-end after changing the slider value via arrow keys
was a cheap way to make the sound feedback work for keyboard input.
But now that the volume indicator plays the sound on ::value-changed
as well, we can stop doing that - after all, key presses aren't drags.
Besides that, this will make the limiting of feedback to actual volume
changes from the previous commit work for key events as well.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/53
gnome-settings-daemon doesn't play the volume change sound when
the volume stayed the same (that is, it is already at its maximum
or minimum). This looks like the right thing to do, so copy its
behavior.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/53
Commit 8d4855f100 accidentally removed the volume change feedback
for scroll events. Add it back to be consistent again with moving
the slider via arrow keys, slider drags/clicks and gsd's media keys
handling.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/53
While those should be concise enough to fit, they may not where
temperatures drop into double-digit negatives. It seems better
to accept some awkward horizontal scrolling in that case than
shorten relevant information.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1926
Commit b779f6f728 added a check to filter out invalid weather forecasts.
However the check is currently done when creating UI for the forecasts,
which means we end up with fewer forecasts than we could display if any
forecasts are invalid.
We can avoid that issue by checking the validity while collecting the
forecasts, so do that instead.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
We currently always start with the current weather info, then append
forecasts. This is slightly confusing, as the only hint that the
first item is special is the past (and potentially "odd") time.
Stop doing that and base all items on forecasts.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
As we get closer to midnight, we show fewer forecasts than we could
fit, or none at all. It makes more sense to continue the forecasts
into the wee hours in that case, so only exclude past forecasts,
but not ones from following days.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
Weather stations can have unwieldy long names, which don't fit the
limited space we have available. City names are usually more suitable,
so use the name of the nearest city instead if possible.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
In case of a very long location name, the label may take up all
available space. Make sure there is at least some spacing between
header and location in that case.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
The two labels use different font sizes, so they don't align properly.
Unfortunately we don't have BASELINE alignment in Clutter, but at least
END comes closer than the default FILL.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
Commit c899453800 lifted the requirement of switcher keybindings
to contain a modifier, however it is currently only possible to
finish it by letting it time out.
Improve that by also accepting space/enter key presses to confirm the
selection immediately.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1883
The noModsTimeout obviously finishes inside a timeout callback, which
means `global.get_current_time()` might return Clutter.CURRENT_TIME (ie.
0) when called inside it, because it's not called while handling an
event. This means when switching apps or activating a window, the
timestamp passed to `activate_window` may be 0, which is the reason why
the altTab switcher is currently broken when using modifier-less
keybindings.
Fix that by using `meta_display_get_current_time_roundtrip`, which
always return a valid timestamp, instead of
`shell_global_get_current_time`.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/847
Remove setCurrentPage() function, introduce setCurrentPosition() instead,
which allows to have fractional positions.
Make inactive dots smaller, filled and partially transparent, as opposed to
larger and fully opaque active dot. Make dots smaller overall, remove
borders. Interpolate each dot between active and inactive state based on
scroll position.
Make it impossible to "uncheck" the active dot.
Thanks Florian Müllner for parts of the code.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1932https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/843
We slightly delay showing the switcher popup to avoid flashing it
briefly in the common case of quickly switching back-and-forth
between two windows.
However some users perceive this delay as slowness. Address this by
showing the popup immediately when another key press is consumed
(that is, a key like Tab is pressed).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1928
Since the mpris implementation of the notification tray supports showing
multiple notification (one for each player), it doesn't make sense to
have only one global property to store the message, since that only
allows referencing one message at a time.
Instead, handle the MediaMessages completely inside the scope of
`_addPlayer()`, this should allow showing more than one message again,
which broke with commit 4dc44304df [1].
[1] https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/791https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/833
Because the message actor could also be undefined or a already
deallocated ClutterActor, we sometimes fail to show the error message
and get an error from Gjs instead.
So make sure we always log the proper error message and just leave out
the actor.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/833
It may happen that the app icon is destroyed with a drag
monitor still around, in which case, a load of warnings
will be shown.
Make sure to remove any pending drag monitor on destroy.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/841
When removing the last icon of a folder, FolderView first removes
the folder from org.gnome.desktop.app-folders.folder-children, then
proceeds to reset all its keys, which removes the relocatable schema.
That order of operations turns out to be problematic. Removing the
folder from 'folder-children' destroys the folder icon, which in turn
destroys the folder view, which throws a load of warnings in the
journal.
Fix that by removing the folder after resetting the schema keys. In
fact, what we're doing here is not using 'this' anymore.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/841
The variable that holds the list of application icons is
called 'newApps', but that technically was never true,
since we only create new app icons when necessary.
Rename it to 'appIcons'.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/841
The views (AllView and FrequentView) build a list of all applications
they contain. BaseView then diffs between what's currently added, and
what needs to be added, and removed.
This approach has a problem though: creating an AppIcon or a FolderIcon
connects to various signals, and we confuse the garbage collector.
When building the list of applications, instead of always creating new
icons, try to use already existing icons first.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1610
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1694
GWeather.Info.get_value_update() may indicate that the forecast is not
valid, or it may return a timestamp of 0 to indicate the information has
never been updated. In both of these cases, skip creating a widget for
it, as the information will not be accurate.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/835
If the clock is set to 12h, the AM/PM in the weather forecast times
should be clear from the context, because they are the immediately
following hours. This makes it less likely that the times will be
ellipsized (in which case the AM/PM wouldn't be shown anyway.)
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/835
While we support a reasonable list of layouts nowadays, we don't
include many variants like `fr+oss`. Instead of directly falling
back to the `us` layout, try stripping the variant first, as the
base layout is likely closer to the expectation than `us`.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1907
When cancelling the PolkitAgent session before disconnecting the signal
handlers, we receive a "completed" signal where `gained_authorization`
is set to FALSE, which means we show an error message inside
`_onSessionCompleted()`.
This in turn means we show an error message every time we cancel a
session. In practice this wasn't really relevant so far since we only
destroyed the session when an actual error occurred before. Now that the
dialog supports empty passwords, we also call `_destroySession()` when
the user changes and no longer has a password set, and in this case we
want to cancel the current session without showing an error message.
So to fix this, disconnect the signal handlers before cancelling the
session, which makes sure we don't receive the last "completed" signal
in case we cancelled the session ourselves. This change also allows
removing `this._wasDismissed`.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/829
When a user has no password and a polkit authentication is started,
instead of blindly initiating the admin session, show the regular
"Authentication Requested" dialog (but without the password entry). This
makes sure that the user's admin session is only effectively started
after the user chooses to proceed with the authentication, which
provides an extra confirmation step that can be vital for critical
tasks.
To do this, we show the dialog inside `_onUserChanged()` right after the
dialog was created instead of calling `performAuthentication()` from
`_onInitiate()`. The bug mentioned in `_onInitiate()` is no longer an
issue since we show the dialog in all cases now anyway.
Ideally we should use a different wording than "authentication" when the
user has no password set, and use "confirmation" instead. However polkit
already sends the requests with such messages (e.g. "Authentication is
required to configure software repositories"), and it's important to
show those to the user, so this patch keeps the regular wording.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/829
Since `_destroySession()` is not only called before we try to initiate a
new authentication session with Polkit, but also when the dialog is
closed, it's currently possible that key focus is grabbed by the close
button after the dialog was dismissed and hidden. This is causing a bug
where after dismissing one of multiple queued dialogs, key focus goes
away and keyboard navigation with the new dialog is impossible.
Fix this by only resetting the UI of the dialog if the dialog is still
opened/visible at that point.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/828
Just as with c35b4cede5, there's no
default vfunc implemented by any parent which causes gjs to crash when
trying to call it.
So return EVENT_STOP if the key press successfully toggled the button,
and EVENT_PROPAGATE otherwise.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/830
Modifying variables from an outer scope in functions created in a loop
is considered problematic by eslint, because the variable value in the
resulting closure is often not what the coder intended.
In this particular case however, the scoping is correct, so add a comment
to disable the rule locally.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/818
The FolderView class is responsible for creating the 4-item
grid of the folder icon, with the preview of the first four
apps inside the folder.
However, with the deprecation of StAlign as child properties,
the folder icon stopped being horizontally centralized.
Center the folder icon horizontally again.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/817
Since ES5, trailing commas in arrays and object literals are valid.
We generally haven't used them so far, but they are actually a good
idea, as they make additions and removals in diffs much cleaner.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
ES6 allows to omit property names where they match the name of the
assigned variable, which makes code less redunant and thus cleaner.
We will soon enforce that in our eslint rules, so make sure we use
the shorthand wherever possible.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
If an else block only contains an if statement, the two can be
combined into an if-else block, which cuts down on indentation
and usually helps legibility.
There are exceptions (for instance where the outer if and else
blocks are mirrored), but where it makes sense, change the code
to avoid lonely ifs.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
The event blocker in AllView is responsible for stealing click events
from the icon grid and closing the folder popup. The event blocker is
kept unreactive when no folder popup is visible, and it's made reactive
as a response to the 'open-state-changed' signal.
Using this signal, though, is problematic. When opening an app folder,
the icon grid first opens space for the folder to fit in; during this
period, it's possible to click on another folder icon, and break the
icon grid state.
Make sure the event blocker is reactive immediately after clicking on
a folder icon.
Related: https://gitlab.gnome.org/GNOME/gnome-shell/issues/1470https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/816
Objects implementing EventSource should have some mandatory methods and
properties, we can ensure this by defining an EventSourceBase abstract
class.
So inherit EmptyEventSource and DBusEventSource from it making sure that
they implement all the needed methods, using native properties and
replacing the 'notify::*' fake signal emissions with proper object
notifications.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/563
Animation background is just wrapping a native GnomeDesktop BGSlideShow
object, so instead of using composition we can now just inherit from the
native GObject, re-using native properties when possible, and avoiding
to keep an extra wrapper to the bg file.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/563
Resizing effects are more finicky as other effects, as the actual
animation is delayed until we receive the ::size-changed signal.
However that signal may never be emitted if the window is destroyed
just after starting the size-change effect, in which case the effect
is never completed, blocking mutter from destroying the corresponding
window actor.
Address this by tracking when a resize effect is pending, and complete
the effect when appropriate.
https://gitlab.gnome.org/GNOME/mutter/issues/655https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/815
I've observed that UPower can occasionally report a charge level of 100%
while the state is still "charging". This usually doesn't last very long
but it is noticeable because the power icon changes to a "missing icon"
icon. This will handle that rare case correctly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/814
Clutter originally cluttered its namespace with key symbols, before
prefixing all symbols with KEY. We still use the unprefixed symbols
occasionally, replace them so mutter can drop the deprecated symbols.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/808
Since polkit takes a few milliseconds from initiating the session to
emitting the "request" signal, don't introduce visual distraction by
hiding the password entry and showing it again a few ms later.
So start a timeout of 200 ms when we destroy a session and if no session
request (i.e. a request for a password-authentication) happened during
this timeout, hide the password entry.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/788
Since we don't know if polkit/PAM will request a password (emitting the
"request" signal) or use another authentication method like a
fingerprint after the current authentication failed, hide the password
field and make the "Authenticate" button insensitive after cancelling
the session, just like we do when creating the dialog.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/788
Set the key focus to the password field only after we got a request
(and therefore know that a password is requested) instead of using
`setInitialKeyFocus()`. This way we don't try to focus the password
field by default if we aren't showing it (e.g. in case the user has no
password or is using fingerprint login).
Also we have to move the call to `grab_key_focus()` to happen after
`_ensureOpen()`, because otherwise the ModalDialog will set the focus to
one of the buttons while opening itself.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/788
Show the user avatar for all users, including the root user. The root
user will always have the generic avatar, but it looks more consistent
than showing no avatar at all.
This way we also don't have to worry about the spacing introduced by the
polkit-dialog-user-layout CSS class, which would give the
"Administrator" label a small offset to the left.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/788
xgettext got better at recognizing template strings, so we can
replace more string concatenations. Alas xgettext is still buggy
(surprise, regular expressions are hard), so there are still a
handful of holdouts that prevent us from making a complete switch.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/792
Every since commit aa394754, StBoxLayout has supported ClutterActor's
expand/align properties in addition to the container-specific child
properties. Given that that's the only container left with a special
child meta, it's time to fully embrace the generic properties (and
eventually remove the child meta).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/780
This wasn't added on the GObject-ification in commit c4c5c4fd5c. This
introduced warnings and misbehaviors when closing the dialog. (Eg.
pressing the "show OSD" pad action would show stack different dialogs
on top each other).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/800
It seems like some recent change (maybe the move to a ClutterActor
subclass for AppIcon) broke the check whether the drag source is an
instance of AppIcon. While the drag source indeed is an AppIcon and
everything else works correctly, the check still returns false, which
breaks the creation of new folders using DnD.
Theoretically it makes sense that this doesn't work, because we're
assigning AppIcon using `var AppIcon =` and that will only get set after
`GObject.register_class()` finished, so accessing `AppIcon` inside that
function seems risky and is probably wrong.
Fix this by comparing to `this.constructor` instead of `AppIcon`, which
works fine and we know for sure exists at this point.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/794
I have observed a client in the wild (Chromium again) set CanPlay to
false momentarily while it is loading the next song. Previously, the
code would close the player proxy in that case, meaning that after
playing one track, the MPRIS message would disappear and never come
back.
However, I think this use of CanPlay, while apparently not usual, is not
incorrect according to the spec. We should hide the message instead of
closing the player proxy.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1362
In the wild we have buggy clients (notably Chromium 77 and earlier) that
send metadata with the wrong types. Previously, this would throw an
exception and prevent the MPRIS information from showing up in the
message list.
This changes the code to check if any incoming metadata is of the type
it is expected to be, and logs a warning if not, then continues on with
a default value.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1362
Make gjs to compute the GType name for registered GObject-derived
classes using the file basename and the first directory name, so that we
can avoid name clashing, and ensure that no extension will break the
shell by registering a name that is already used (by the shell or by any
other extension).
This requires gjs commit 02568304 [1] that will be part of release 3.35.2,
so bump the required version as gjs does post-release version bumps.
[1] https://gitlab.gnome.org/GNOME/gjs/merge_requests/337https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/790
Similar to the previous work-around, xgettext gets thrown off by
embedded quotes in template strings, in particular where a template
"breaks up" a pair of quotes.
Throw in some more comments to make xgettext happy, but whoever makes
the gettext toolchain not depend on fragile regular expressions will
be drowned in beverages of their choice ...
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/792
This corrects weird-looking blending visible as it fades out when the
overview closes. Previously the entry's dark background would drown out
the text as it fades out, but now they maintain a consistent contrast ratio
during the fade.
There's no noticeable change in performance, but in theory it should be
faster as text entries don't change at full frame rate. So stage redraws
will usually have a cached searchEntry drawn and require less effort.
Though the main purpose here is to correct the appearance.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/778
The close dialog is added as a child to MetaWindowActor, and, in Wayland
sessions, since commit [1] MetaWindowActor applies a transformation
matrix which scales all it's children using the geometry scale factor.
Now because the dialog actor is not a window (i.e. a MetaSurfaceActor),
but a subclass of StWidget, the scale factor is also applied to the
properties of the dialog by StThemeNode, so we end up applying the
geometry scale twice to the close dialog.
Fix this by applying the inverted scale to the dialog, which leaves the
scaling only to MetaWindowActor. This means we also can't apply a pivot
point other than 0 to the dialog actor, so apply the 0.5-pivot point to
the `_dialog` child of the Dialog class (the actual visible dialog box)
and also perform scaling animations on this child.
[1] https://gitlab.gnome.org/GNOME/mutter/commit/fb9e8768https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/783
Remove all transformations from window actors after a window animation
was either cancelled or finished. Right now we only do that if the
transition finished successfully, which seems kind of pointless (it can
probably be historically explained because the callbacks inside the
"kill-window-effects" signal handler are connected to those
`*WindowDone()` functions though and the `*WindowOverwritten()`
functions were only added later in [1]).
This fixes a recent regression where a window animation would get
cancelled and remain stuck by switching workspaces. The regression
probably happened due to different behaviour of the `onOverwritten`
callback of Tweener and the `onStopped` callback of Clutter transitions:
For the workspace-switching animation the window actors get reparented
to a temporary container, which makes Clutter transititons emit
"stopped" (`clutter_actor_remove_child_internal()` stops transitions on
its children), while Tweener would continue the animation.
[1] 6dd302e5cehttps://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/784
Some vfuncs like `button_press_event`, `button_release_event` and
`touch_event` don't have handlers in the parent classes of
PopupBaseMenuItem. So don't call those handlers and return the default
Clutter.EVENT_PROPAGATE there.
This fixes a crash of the shell that happens when pressing a mouse
button inside the system popup menu and releasing it above a slider like
the volume slider again.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/787
We currently only update the windows section when either the focus app changes,
or when the app's windows change (that is, a window is opened or closed). This
allows the menu item labels to become stale if the window title changes after
one of those events (for example when switching tabs).
Fix this by updating menu items when the corresponding window title changes.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1830
g_desktop_app_info_get_categories() may return null. In that case, the
previous code would fail to create a folder when dragging an app with
no categories onto another app. Instead, simply continue with the next
app info.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/782
In the case of bugs in a drag target's acceptDrop() function, it may
throw an exception. In the previous code, this would break out of the
loop entirely and never cancel the drag, so the mouse button release
event would be ignored and you would have to press Esc to get out of the
drag.
In this change, if acceptDrop() throws an exception, we log it and move
on to the next parent target instead.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/777
Those are two useful ClutterTimeline properties and
will be needed for wiggling the search entry when
failing the password.
Add support for passing repeat-count and auto-reverse
to ClutterActor.ease and ClutterActor.ease_property.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/768
When accessing properties on ClutterActor for size and position there is
a notable access time overhead. This overhead adds considerable user lag
when opening the overview if many windows are open.
This is primarily due to these properties being accessed while sorting
WindowClone instances by their window's center for placement in the
overview. By pre-computing this center value only once when
initializing WindowClone, the induced lag can be significantly reduced.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/763
Overview's animationInProgress, visible and visibleTarget properties are not
meant to be modified from others, but be read only.
So make this clearer using properties getters and private values.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
Instead of manually updating properties on change, use native properties
bindings to keep the them synchronized.
Disable hover-tracking and focus-ability when the avatar is not sensitive.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
Now that the calendar message list and the message sections are actors, there's
no need to keep track of the sections in a different Map as we can just use the
native clutter functions to manage the children and access to their properties.
Also cleanup the signal connection/disconnection.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
When messages are added to the message list, we create a container for those,
however since now the messages are actor themselves we can just create a list
item actor that holds the message actor and refer to the message parent in order
to get their container.
This allows to remove the obj container map we used, using the native clutter
parent-child hierarchy and handle signal connections cleanly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
Since all the search result classes are now GObject classes, we can enforce
the methods we want to have in there (just activate() for now) using an
interface, to make sure they are implementing what we require and to easily
group all the classes that can be used as search results, even though they
are not extending SearchResult.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
Remove the `this.actor = ...` and `this.actor._delegate = this` patterns in most
of classes, by inheriting all the actor container classes.
Uses interfaces when needed for making sure that multiple classes will implement
some required methods or to avoid redefining the same code multiple times.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
Dispose the Source Object when dispose() is called, avoiding that it could be
called twice on a destroyed Source.
So, notify count changes before destroying the object, and don't emit this
twice on destroyNonResidentNotifications (as if a notification is destroyed
the property notify will happen in the notification destroy callback anyways).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
When the notification is destroyed we should also dispose the underneath GLib
object, and ensure that we don't dispose this twice.
In order to avoid this, don't destroy transient notifications that have been
already been removed and only destroy the resident notifications on activation
if they have not been destroyed earlier.
Thus connect after to the 'activated' signal and once the default handler has
been called destroy the notification if not requested earlier.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
The Keyboard class used to be both a view and controller class, however in order
to make the keyboard a native Clutter.Actor, we need to separate the widget from
the controller class, so that we can manage the actor lifetime from the JS side.
Thus, initialize the keyboard actor on the Keyboard constructor and create a
KeyboardManager class to manage its state and lifetime.
Add proxy methods for the public functions that were used by other shell
components
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
Meta.Background has already a 'changed' signal and not to confuse the source
signal with the wrapper one, rename the wrapper class signal into 'bg-changed'.
This will be relevant when we'll inherit from Meta.Background, as signal
emissions from the base class could interfere with the wanted derived class
behavior and with the the grouping of successive changes into a single ::change
emission.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
When the screen is marked as idle, we normally start a fading animation and
a timeout to finally lock the screen. This timeout is configured using the
fade time if no longer delay is set in settings.
However if animations are disabled or slowed-down/up, the fade time is
different from the STANDARD_FADE_TIME and so we might end up showing the
lock shield without actually locking for STANDARD_FADE_TIME in the disabled
or slowed-up animations case, or locking too early in case of slowed-down
animations.
So, just adjust the timeout time using the same logic of animations so that
this value is matching all the times.
Related to https://gitlab.gnome.org/GNOME/gnome-shell/issues/1744https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/749
Devices like cameras and microphones are privacy sensitive, as they can
be used to spy on the user. We cannot prevent non-sandboxed apps from
doing that, but as we already track when the microphone is recording,
we can at least show an indicator to make sure it doesn't happen behind
the user's back.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/729
Search result views can include also objects that are not inheriting from
SearchResults (such as the AppIcon) that has not any 'activate' signal, to
connect to. Since we want to enforce a more formal interface, we want to
have just a simpler requirement as an activate() method.
So, instead using the 'activate' signal in SearchResult to activate a result
via SearchResultsBase just implement activate() in the result.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/765
When a transition is set up with a delay, it may be removed before it
actually started. We won't get a ::stopped signal in that case, with
the result that we currently end up with a mismatched unredirection
disabling.
Address this by only disable unredirection once the transition has
actually started.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1788
gnome-session used to show a dialog in this case, but a
notification is more natural nowadays. Doing it in gnome-shell
avoids complicated synchronization between gnome-session and
gnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=701212
We share this actor with other shell menus, which arguably track a different
"cursor" as we care of the caret/anchor text positions, and menus care about
pointer click coordinates.
Use a standalone actor for this, so popups/IM are entirely decoupled.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/1571
If graphical applications want to start from systemd units, they need to
start after we're properly ready to display them. This is particularly
important under X where `_GTK_FRAME_EXTENTS` and other xprops are needed
to have the right theming.
We're doing this in an idle callback so that the dynamic starting of
`gnome-session-x11-service.target` (which launches `gsd-xsettings`) as
the result of a signal emission happens before us signalling we're ready
for later things to start.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/750
As per clutter optimizations in should_skip_implicit_transition() any
transition will be ignored if applied to an actor with unmapped clones.
Since we initialize the lightbox as hidden, when we use it standalone (as it
happens for the long fade in screenShield) the transition will be ignored.
This causes the lockscreen fade-out after the idle delay not to work, but
instead to have an apparently locked system that is instead not locked at
all.
So, just ensure that the lightbox actor is visible before applying to it any
transition.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1683
Unset the signal IDs we connected to when starting the drag. Otherwise
we get error messages if a touch drag is ended after a mouse drag
happened because the signal IDs are still set but no signals are
connected.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/740
The screen shield creates the unlock dialog based on the session mode.
However since commit 0c0d76f7d6 turned LoginDialog into an actor
subclass (while UnlockDialog kept using the delegate pattern), it is
no longer possible to handle both objects the same way without warnings.
Allow this again by turning UnlockDialog into an actor subclass as well.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/736
When easing, we need the transition of one of the involved properties
to connect our callbacks. Currently we simply get the transition for
the first property, however as Clutter optimizes the case where a
property doesn't actually change, that transition may be NULL even
though we still animate other properties.
So instead of only looking at the transition of the first property,
try to find a transition for any of the involved properties.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1572
The RenameFolderMenu uses the internal box as a menu item, while PopupMenu
expects to have PopupBaseMenuItem based children with a delegate set.
Instead of using a custom menu with a customized box acting as menu
item,just add a RenameFolderMenuItem that inherits from the parent,
adjusting the features as we need them. In fact, the rename folder menu item
doesn't need any label, padding or default styling so we can reuse
PopupMenuBaseItem after we use our styling properties and we set the
Ornament to HIDDEN.
To get the proper style in place, define rename-folder-popup and
rename-folder-popup-item to override the default popup-menu-item rule
padding instead of using margins.
Pass the menu item as menu's focusActor as this will key-focus it on pop-up,
by overriding the key_focus_in() vfunc we can then delegate the focus
handling to the entry's clutter-text.
Also override the map() vfunc in order to update the entry's content before
mapping the entry.
Finally, use the item's activate method in order to tell the parent menu
we're done with it and that the menu can be closed.
As consequence we can also remove the menu's popup() method, and just use
the default open().
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/720
When the rename folder menu is opened the text entry is expected to be
focused and selected for a quick editing.
While this is required it doesn't actually happens since PopupMenu by
default gives the key focus to the source actor, that is then free to pass
the key focus to the menu if there's an user interaction.
In this case however, we want the text entry to be focused once we prompt
the menu, so just use the PopupMenu's focusActor property to ensure it will
handle it for us.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1604https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/720
The PopupMenuManager is supposed to grab and focus the menu actors, with
normal menus we always need to grab the actual menu but set the key focus to
the source actor so that it will be able to move the focus to the menu
child, if requested.
However there are menus such as the RenameFolderMenu that requires the
key-focus once prompted, so provide a focusActor property (defaulting to the
sourceActor) that can be set in order to define the actor to give the
keyboard focus to, when the menu is popped-up.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1604https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/720
The menu item ornament is used to put dots or checks in menus or otherwise
to define a padding for a label.
However in some cases we want to create a menu item with no left (in ltr)
padding.
In order to do that, define a HIDDEN Ornament mode that completely hides the
ornament actor.
The naming here might be confusing as this should probably be called NONE,
while the default mode is the invisible one, but it's too late to change it
now.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/720
While commit 3094f863 was intended to cancel the ongoing idle hide
timeout before we start a new one, a mistake slipped in there while
rebasing: Obviously we should check if the signal id is NOT 0 here.
This didn't prevent timeouts being started while old ones are still
running and did override `this._idleHideOverlayId`, which caused the old
timeouts to run indefinitely after an overlay actor was destroyed
because we fail early (and don't return TRUE) in `_idleHideOverlay()`.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/735
Indicate whether dropping an app icon was successful or not by using the
newly added `animateLaunchAtPos()` API of AppIcon which starts a zoom
out animation of the icon at the position the drop happened.
To get the position of the drag actor, we have to forward the arguments
passed to `acceptDrop()` and `handleDragOver()` to the internal drag
handlers of the WorkspaceThumbnails. We can use this position directly
without transforming it to stage coordinates because the actor is a
child of `Main.uiGroup` and the animation actor will also be a child of
this container.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/121
Add a `animateLaunchAtPos()` method to the AppIcon class to animate the
launch of an app at a given position. This allows for a visual
indication of whether dropping an app icon using DnD was successful at
the position the drop happened in a later commit.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/121
Return the results of calls to acceptDrop that we forwarded to the
Workspace object.
This fixes a bug where app icons that were dragged and released above a
window clone would get animated back to their original position
(indicating that nothing happened) even though they opened correctly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/121
`AppIcon.shellWorkspaceLaunch()` can easily be replaced by checking for
`AppIcon.app` and calling `AppIcon.app.open_new_window()` directly.
For compatibility and to prevent breaking extensions implementing the
function, keep supporting the `shellWorkspaceLaunch` API in AppIcon
while logging a deprecation warning. Also keep supporting the API on
drag sources (without deprecating it) to allow extensions to define
custom actions on their drag sources.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/121
If the search entry does not have any text typed in and a button press
happens outside of the search entry, we set key focus to NULL to make
the search entry appear unfocused.
This is quite intrusive and can easily cause unwanted focus changes, so
change the captured-event handler to only call `reset()` if the search
entry actually is focused.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/683
Instead of returning and waiting until the old timeout is finished,
start a new idle hide timeout for the overlay when the pointer enters a
window clone. This makes sure the timeout for hiding the overlay after
the pointer left the clone mostly stays the same (except when leaving
the clone via the title or the close button).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/683
As arrow functions have an implicit return value, an assignment of
this.foo = bar could have been intended as a this.foo === bar
comparison. To catch those errors, we will disallow these kinds
of assignments unless they are marked explicitly by an extra pair
of parentheses.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/731
Calling await in a loop means the asynchronous operations are
run sequentially instead of in-parallel. Usually that's not
what's wanted, so eslint has a rule to warn about this.
However here we use async/await to handle control back to the
mainloop between steps, so running operations sequentially is
actually intended.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/731
The intention of the code is clearly to operate on a copy, but that's
not how the Object constructor works. While it doesn't matter in
practice that we modify the passed-in object parameter, it's still
a good idea to fix the code.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/731
The legacy indent rule currently ignores arrow functions in parameters
to allow callbacks to not align with the other arguments:
this._someFunctionWithFairlyLongishName(arg1, arg2, arg3,
() => {
this._someOtherFunctionWithLongName(arg1);
});
But as ignoring entire nodes means we can end up with arbitrary
indentation, we should drop the exception. While this would make
the above "illegal" under the legacy config, it conforms with the
non-legacy style, so everything should be fine ...
... except that eslint starts to complain about some function args
that should be fine under the legacy config. Maybe it's thrown off
by the function-arg-in-arrow-function-in-function-arg structure, but
rather than figuring it out, let's just move those to the new style.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/725
We are currently inconsistent whether to put the operators in front
of the corresponding line or at the end of the preceding one. The
most dominant style for now is to put condition and first branch on
the same line, and then align the second branch:
let foo = condition ? fooValue
: notFooValue;
Unfortunately that's a style that eslint doesn't support, so to account
for it, our legacy configuration currently plainly ignores all indentation
in conditionals.
In order to drop that exception and not let messed up indentation slip
through, change all ternary operators to the non-legacy style.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/725
Some more places where the indentation doesn't comply with either
the old or new style. They slipped through because the legacy eslint
configuration accounts for some patterns by plainly ignoring certain
nodes. We'll address that later, first fix up the indentation errors.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/725
When there is a transition, it's likely that we are animating some part
of the desktop, and in such situations we don't want to unredirect
fullscreen windows.
This fixes unwanted unredirection when e.g. hiding a modal dialog by
re-enabling the unredirection after the animation has finished, instead
of when it starts.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/721
Updating the window list in the Looking Glass is a costly
operation: it destroys a whole lot of actors, and recreates
them. This triggers CSS changes, repaints, and allocations.
It is specially bad when paired with Wayland's big number
of window creations and deletions when showing Builder's
and Epiphany's popup window.
Only update the window list in the Looking Glass when it is
visible.
Related: https://gitlab.gnome.org/GNOME/mutter/issues/556https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/719
Since ES5, it is possible to create objects with no prototype at all:
let foo = Object.create(null);
Those object won't have any builtin properties like hasOwnProperty(),
which is why eslint added a corresponding rule to its default rule set.
While this isn't an issue that affects our code, there's no harm in fol-
lowing the recommendation and call the method through Object.prototype.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/716
We currently use no less than three different ways of indenting
object literals:
let obj1 = {
foo: 42,
bar: 23,
};
let obj2 = { foo: 42,
bar: 23 };
let obj3 = { foo: 42,
bar: 23
};
The first is the one we want to use everywhere eventually, while the
second is the most commonly used "legacy" style.
It is the third one that is most problematic, as it throws off eslint
fairly badly: It violates both the rule to have consistent line breaks
in braces as well as the indentation style of both regular and legacy
configurations.
Fortunately the third style was mostly used for tween parameters, so
is quite rare after the Tweener purge. Get rid of the remaining ones
to cut down on pre-existing eslint errors.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/716
Since disabling an extension will lead to disabling and re-enabling all
following extensions in the list, always disable multiple extensions by
looping through the list in reverse order.
This lowers the execution time of the event handlers quite a bit if many
extensions are installed.
Thanks to Philippe Troin for identifying the problem and proposing the
initial patch to change the extension order when reloading.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/177https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/96
Only push uuids of newly enabled extensions to the `_extensionOrder`
array if enabling them was successful.
Otherwise, since `_callExtensionDisable()` doesn't remove uuids that
weren't successfully enabled from the array, those extensions get added
to the array multiple times when they're disabled and enabled.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/96
It's currently possible to circumvent the `sessionMode.allowExtensions`
property: For already enabled extensions one can call reloadExtension
via DBus, for new extensions it's possible by adding the extension to
the enabled-extensions gsettings key and setting the
disable-extension-version-validation key (which triggers a reload of
`this._enabledExtensions`) and then calling reloadExtension via DBus.
So to enforce `allowExtensions` while still allowing to update
extensions and keeping the extensionSystem synced with various gsettings
keys, replace the checks for `this._enabled` with simple checks for
`Main.sessionMode.allowExtensions` inside `_callExtensionInit()` and
`_callExtensionEnable()`.
The remaining checks for `this._enabled` are only small optimizations to
prevent running code on irrelevant sessionMode updates.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/96
Right now we're only handling added sessionMode extensions correctly on
sessionMode updates, also handle the other case and disable removed
sessionMode extensions on sessionMode updates.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/96
Instead of only logging a message that loading the extension stylesheet
failed and silently returning we should use `logExtensionError` for that
instead. This also sets the extension state to ERROR and makes sure we
don't try to enable it again.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/96
If the extension doesn't exist in the `this._extensions` Map, we'd try
to access `extension.dir` on undefined/null. So set the `dir` variable
after checking if `extension` is defined.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/96
Code and comment were based on the old get_input_rect() and get_outer_rect()
method names that were changed to the more appropriate get_buffer_rect() and
get_frame_rect() a long time ago.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/713
The animation was removed in commit 6a00a504d4 for consistency with
other menus. However commit a9b12d5d73 then *added* animations to
those just four minutes later.
So add back the original animations for consistency, both with menu
closing and with other menus.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1595
Remove transitions of the `slide-x` property of the layout manager
before we set the property to a fixed value, otherwise the transitions
might still be running and change the value after we set it.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/707
When selecting an area for screenshot we monitor the events while we've valid
coordinates in order to redraw the rubber band.
However, we don't stop ignore the motion events after button release and so
while animating. This might cause an unwanted effect if moving the mouse away
during fade out that is way more visible slowing-down the animations.
To fix this ignore any motion event once we've set the results.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/711
Add a new popover with a regular entry + button to rename
folders. The layout is similar to other GNOME applications.
The popup is implemented as a PopupMenu subclass, leaving
the grab management to PopupMenuManager.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/675
We're using a vfunc override for `get_paint_volume` to exclude children
with an opacity of 0 from the paint volume and thus decrease the size of
the area we need to paint.
Now if the paint volume is requested during the spring animation (the
real icons are hidden using an opacity of 0 and clones are used for the
animation), `get_paint_volume` returns a paint volume with a height of
0. After that, the spring animation finishes and the icon-opacities are
set to 255 in `_resetAnimationActors`, and since we cache paint volumes
and there's no reason for Clutter to assume it got invalid, the icons
end up not being painted.
Fix this by queuing a relayout of the grid when the opacity of a child
is changed from or to 0, which manually invalidates the paint volume.
The reason why this is not an issue with the paginated icon grid
(all-apps view) is probably because StScrollView invalidates the paint
volume a lot more often than regular containers.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1502
Extensions might emit JS errors explicitly or implicitly, however GNOME
Shell doesn't present any stack trace for those making them quite hard
to debug.
Make this easier by logging errors with logError() whichs includes the
stack dump.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/700
When the GridSearchBase actor is destroyed we should remove the
ongoing later that might try to access to invalid resources.
To do this, add an _onDestroy() callback function to SearchResultsBase
and override it in GridSearchBase.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/700
Easing calls on show/hide functions have some parameters in common whether the
radial effect is enabled or not.
So instead of doing repeated calls with similar parameters, initialize common
values in params objects.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/700
If the resource scale or the scale factor changes while the animation
is playing, we need to stop the animation and start it again once the
texture is loaded, as the idle might try to access an invalidated
animation child otherwise.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/700
Commit 21e14bd46f fixed this for the
brightness slider, but we have the same problem for volume too. When the
volume is muted - for example in Settings or via a media key, we update
the slider to '0' to indicate this visually. But we also actually invoke
the slider's callback to *set* the volume to zero. That means that the
previous level is overwritten so it can't be restored when unmuting.
The fix is the same - when we update the slider internally ourselves,
don't call the signal handler.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1557
We now do 2 things along Xwayland startup/shutdown:
- Start or stop the gnome-session-x11-services target, that will
pull all X11 related services that the session might depend on.
- As we start ibus-daemon manually, trigger a restart in order to
toggle the XIM daemon on and off along with Xwayland presence.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/680
An Endless OS system was found in the wild with a malformed
.local/share/gnome-shell/notifications which causes _loadNotifications()
to raise an exception. This exception was not previously handled and
bubbles all the way out to gnome_shell_plugin_start(), whereupon the
shell exit(1)s. The user could no longer log into their computer.
Handle exceptions from _loadNotifications(), log them, and attempt to
continue. Ensure that this._isLoading is set to 'false' even on error,
so that future calls to _saveNotifications() can overwrite the (corrupt)
state file.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1552
The updatesPermission is currently initialized synchronously, which
blocks the Mainloop for quite some time and therefore slows down startup
of the shell, let's do it asynchronously instead.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/689
Since we now put a short timeout in before the start of the actual pie
timer we don't start the timer as often as we used to. This allows us to
create a new PieTimer object each time a timeout is started and
therefore play a finish animation independently of other (new) timeouts.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/688
If the circle is complete and the pie timeout finished, we don't need
the lines to the center point indicating the ends of the pie anymore.
We just draw a clean circle instead, which allows for a zoom-out and
fade animation of the circle when we're done.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/688
If the pie timeout has finished successfully there's no need to cancel
the pie animation, instead we can just wait for that animation to finish
and show some visual feedback like a zoom-out animation to indicate the
click afterwards.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/688
Fade the pie timer in using a duration of 1/4 of the timeout and a
EASE_IN_QUAD animation. This significantly reduces flickering of the pie
timer while moving the cursor and makes the timer less distracting.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/688
Before the move to Clutters implicit animations with 0846238f6 and
bf497ed64, we used Tweener to do a fake-animation of the opacity and
Tweeners `onUpdate` signal to queue a repaint of the PieTimer everytime
Tweener tries to update the animation.
Now, with Clutters implicit animations, there is no `onUpdate` signal
anymore and also `notify::opacity` no longer gets emitted since the
value doesn't actually change. This lead to the PieTimer no longer being
repainted, which broke the animation.
Fix this by implementing the current angle of the pie using a custom
GObject property `angle` and animating this property using the new
`actor.ease_property` method.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1533
When cancelling the animations of the icon grid, right now we simply
destroy all the clones without resetting the opacity and making the
actor reactive again. So if the spring animation to show the grid is
cancelled by pressing a key to start a search, the icon clones would be
destroyed, but the icon-opacity would still be set to 0. Now if the
Escape key is pressed, viewSelector will show the last active page (ie.
the iconGrid) without a custom animation and only fade in the page, and
because the icons still have an opacity of 0, they will be invisible.
Fix this by always restoring the opacity and reactive property of the
original actors if the animation is cancelled instead of only destroying
the clones.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/678
Since we set the proxy value when the slider changes and set the slider
value on proxy property changes, we run into a cycle.
Before commit 3d3dca4aa this was addressed by not notifying on all slider
changes, but only in reaction to direct user action. Given that since the
splitting out of the BarLevel class those events are handled in a subclass,
that approach is at least unconvential and fairly fragile.
Instead, make the brightness indicator ignore any changes to the slider it
initiated itself.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1500
With 8b368d010 we fixed a bug where the onComplete callback was always
called no matter whether the transition was interrupted before or not.
This exposed another bug: viewSelector depends on this behaviour when
fading out pages: After fading out a page, we call `this._animateIn` to
show the new page. Now if the fade-out animation gets interrupted, with
the correct behaviour of onComplete we end up not showing a new page and
the viewSelector remains empty instead. One case where this happens is
when pressing a key to start a search during the overview-animation.
Obviously we also want to show the new page in case the fade-out
animation was interrupted, so use the onStopped callback instead of the
onComplete callback here.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/674
