Commit Graph

337 Commits

Author SHA1 Message Date
Daniel van Vugt
88b2c9a046 windowManager: Animate the appearance of new windows after overview closes
So that the animation doesn't get skipped if the overview is visible but
in the process of closing.

In this case the overview being visible also means that it is closing,
because if it's visible and not already closing then `_shouldAnimateActor`
would have returned false and exited `_mapWindow` earlier.

Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/1814,
       https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3242

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1440>
2021-08-19 15:53:57 +08:00
Daniel van Vugt
ea9c4e589d windowManager: Allow animations to start if the overview is closing
So the `WindowManager._mapWindow` animation doesn't get skipped if the
overview is visible but closing.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1440>
2021-08-19 15:44:34 +08:00
Olivier Fourdan
8be5d33611 windowManager: Remove timeout on starting X11 services
With Xwayland started on demand, mutter/gnome-shell will spawn Xwayland
and GNOME settings daemon Xsettings.

Currently, gnome-shell uses a timeout of 5 seconds before canceling the
launch and declare failure to start X11 services.

While 5 seconds may seem like a lot of time, when this is executed on a
virtual machine part of a QA tests under load, this causes random
failures.

There is no good value here, we could increase the timeout but it will
always remain racy. Instead, remove the timeout, systemd itself already
has a timeout mechanism (with a much longer wait time).

Thanks to Benjamin Berg <bberg@redhat.com> for finding the root cause
and suggesting the fix.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1888>
2021-06-15 11:24:59 +02:00
Olivier Fourdan
d9239e2cee windowManager: Ignore error without systemd
On systems/setups not using systemd, a failure to start gsd-xsettings
with NOT_SUPPORTED does not denote a failure to start Xwayland, just
that we're not using systemd.

In that case, we should just ignore the error, otherwise it will prevent
Xwayland to start on such systems/setups without systemd.

Thanks to Rose Kunkel (@rosekunkel) for spotting the issue/suggesting
the fix.

Fixes: 019229c40e - windowManager: Return failure to start X11 services
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4284
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1850>
2021-05-18 14:31:28 +00:00
Olivier Fourdan
019229c40e windowManager: Return failure to start X11 services
If for some reason the xserver failed to start, mutter/gnome-shell
should not attempt to connect to the X11 display otherwise it will
lock up in XCB.

An indication of such a premature failure of the xserver is when the X11
services fail to start.

Return the status so that the caller can cancel the connection in time
and avoid the lockup of mutter/gnome-shell in case of failure.

This, however, makes the X11 services a critical component to start
Xwayland, meaning that a failure to start those services for any other
reason than the xserver failing to start would still prevent Xwayland
and therefore X11 clients to run in Wayland. This is however a lesser
issue than mutter/gnome-shell locking up.

This basically reverts commit a96753f0 - "windowManager: X11 can work
without gsd-xsettings".

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1837>
2021-05-11 14:05:40 +00:00
Nishal Kulkarni
2b2a71832a windowManager: Hide overview on using hotkey
Change behavior on pressing Super+Number in Activities/Overview mode
so that the overview mode is hidden and application can be used.

This makes it consistent with clicking icon in the dash.

Closes: #4212
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1839>
2021-05-11 12:50:01 +00:00
Florian Müllner
fb1ab4f20b windowManager: Limit super-scroll handling to normal mode
The overview has it's own workspace scroll handling, and we don't want
to switch workspaces in other modes. Limiting the scroll-event handler
to NORMAL mode matches the swipe tracker used by WorkspaceAnimation,
and allows for other uses of scroll events (like scrolling in the
alt-tab popup).

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3840

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1746>
2021-03-09 12:28:36 +00:00
Abderrahim Kitouni
48ae38c52d windowManager: Use Clutter default text direction
This code was copied from workspacesView which used the widget's text
direction, but it is no longer in a widget

Fixes #3780

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1724>
2021-02-26 18:10:16 +01:00
Florian Müllner
ece5220b42 windowManager: Keep a minimum number of workspaces
The scaled down workspace in the window picker looks lonely when there's
no adjacent workspace peeking in. Avoid that by always keeping a minimum
of two workspaces.

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3739

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1696>
2021-02-19 01:13:05 +01:00
Carlos Garnacho
0580fe6eff windowManager: Move OSK gesture to KeyboardManager
It would be nice to get finer control over the keyboard slide
gesture and animation. Move the gesture bits so they are together
at keyboard.js.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1668>
2021-02-17 15:45:01 +00:00
Carlos Garnacho
2799760244 windowManager: Drop sync_pointer() after relayouts
We should trust the Clutter machinery here, as it has code to trigger
focus changes triggered by relayouts.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1556>
2021-02-14 13:57:56 +00:00
Carlos Garnacho
28f73a175c windowManager: Do not set Wacom LED state through g-s-d
This piece of machinery is going away, in favor of the own kernel's
support.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1075>
2021-02-13 15:52:55 +01:00
Pascal Nowack
d02612e790 ui/windowManager: Fix horizontal scrolling when smooth events are used
Currently, gnome-shell uses the wrong scrolling direction for
horizontal scrolling events.
When dx < 0 for a smooth scroll event, then the scrolling direction is
supposed to be Clutter.ScrollDirection.LEFT, instead of
Clutter.ScrollDirection.RIGHT, as dx is smaller than 0.

Fix this issue by swapping the values LEFT and RIGHT.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1665>
2021-02-11 15:43:19 +01:00
Florian Müllner
7aa36ad239 windowManager: Allow switching workspaces with super-scroll
So far, we couldn't allow workspace scrolling outside the overview
because scroll events were always sent to clients. However mutter
was changed recently to pass on scroll events when the mouse button
modifier (usually super) is pressed, which allows us to enable the
same workspace scrolling as in the overview now.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1612>
2021-02-04 20:04:15 +00:00
Florian Müllner
26a39bdf78 workspacesView: Move workspace scroll code to windowManager
This will allow sharing the code for the new super-scroll functionality.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1612>
2021-02-04 20:04:15 +00:00
Alexander Mikhaylenko
269c5ca957 workspaceAnimation: Stop depending on shellwm
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1326>
2021-02-02 19:35:07 +00:00
Alexander Mikhaylenko
bebd612a8f workspaceAnimation: Split from WindowManager
It's already too complex, and will get more complex in future, split it
out. Update the code style.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1326>
2021-02-02 19:35:07 +00:00
Georges Basile Stavracas Neto
78f886f42c windowManager: Switch to horizontal workspaces
Do so by removing the workspace override.

Requires https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1684

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1593>
2021-01-29 15:01:03 +00:00
Florian Müllner
40e22eb524 cleanup: Use optional chaining and ?? operator
Those operators have been supported since gjs switched to mozjs78
last cycle. While not ground-breaking, using it makes for a nice
cleanup here and there.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1517>
2020-12-02 15:10:29 +00:00
Jonas Dreßler
96dc6d19dd windowManager: Check whether metaWindow is NULL after destroy animation
When logging out or terminating gnome-shell, mutter will unmanage all
open windows, triggering the window-close animation in gnome-shell and
very quickly after that emitting "kill-window-effects". That means we'll
call _destroyWindowDone() to cleanup our animation data, but at this
point the MetaWindow of the window is already gone, so we get an error
that get_meta_window() returns NULL.

Fix that by checking whether get_meta_window() returned NULL and if it
did, don't access the window.

Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2018

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1483>
2020-11-21 23:40:53 +01:00
Florian Müllner
8a47f1c667 cleanup: Remove empty leading/trailing lines in blocks
gjs added a new rule to its eslint ruleset that forbids "block padding",
so make sure we conform to that rule before syncing up the configuration.

https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1498
2020-11-16 18:04:23 +00:00
Daniel van Vugt
6ba3ca5f95 windowManager: Avoid calling meta_window_actor_thaw when not frozen
Because that tends to crash in:
```
g_error ("Error in freeze/thaw accounting");
```

Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1431

https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1453
2020-10-08 14:27:58 +08:00
Benjamin Berg
01a927f388 windowManager: Wait for X11 services using systemd
To do this, we now wait for the start/stop job to complete. We also have
two targets in gnome-session to ensure that everything is working as
expected.

In order to start the services, we simply request the
gnome-session-x11-services-ready.target unit, and wait for it to become
available. To stop, we use the gnome-session-x11-services.target unit
which should stop all services in a way that is entirely race free.

This requires both gnome-session and gnome-settings-daemon changes to
work (which are in the corresponding merge requests).

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/895
2020-07-31 13:53:31 +00:00
Florian Müllner
e90466347a cleanup: Use Meta.Workspace.active property
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1337
2020-06-29 17:09:38 +02:00
Florian Müllner
08a5f41505 windowManager: Support prepending workspace with horizontal layouts
Commit ce35d523a2 implemented that behavior for vertical workspace layouts,
there is no reason to not allow the same for horizontal layouts.

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2916
2020-06-20 08:15:44 +00:00
Jonas Dreßler
c23ad83c59 windowManager: Warn when removing old animationInfo
Now that we properly notify mutter about when a size-change animation
has ended, it should never happen that a new size-change animation is
started without the last one being cancelled (ie. 'kill-window-effects'
being emitted).

This means there should also never be an old animationInfo attached to a
window actor, so warn in case we still find one when starting the
animation.

https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1251
2020-06-15 13:12:03 +00:00
Jonas Dreßler
4a6f550acb windowManager: Use new mutter API to freeze window actors ourself
We're currently using the hack of telling mutter that our effect is
completed (even though it isn't) in order to unfreeze updates of the
window actor.

This causes a bug with detecting the wl_outputs a window is
visible on, because the MetaWindowActor emits its "effects-completed"
signal too early, making Mutter update the wl_outputs while we're doing
the animation.

Now since meta_wayland_actor_surface_is_on_logical_monitor() uses the
transformed position and size of the MetaSurfaceActor and is being
called right after we setup the animation (but before it actually
starts, that happens at the next paint cycle) it will use a "very wrong"
rectangle: The transformation has been set to move the actor back to its
old position, and while we did already unfreeze updates and called
clutter_actor_set_position() in meta_window_actor_sync_actor_geometry(),
the actual allocation is not updated yet; this makes
clutter_actor_get_transformed_position() return a position including in
the new transformation, but not including the new allocation, and the
rectangle ends up being moved to the next monitor or completely out of
the stage.

To fix this issue properly, we need to decouple unfreezing actor updates
from emitting the "effects-completed" signal, which is now possible with
the new meta_window_actor_freeze() and meta_window_actor_thaw() APIs. So
use those new methods to freeze and thaw actor updates ourselves and
make sure to call shellwm.completed_size_change() only after the
animation has finished.

Mutter MR: https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1250

Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/513

https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1251
2020-06-15 13:12:03 +00:00
Jonas Dreßler
8078d78c30 windowManager: Also clear animationInfo when size-changed wasn't emitted
It might be that we receive a "kill-window-effects" signal between the
emission of the "size-change" and the "size-changed" signal.

In this case we already have the animationInfo attached to the window
actor, so we should also remove it.

https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1251
2020-06-15 13:12:03 +00:00
Jonas Dreßler
d7185d71c6 windowManager: Clean up starting of size-change animations a bit
We can do without having two calls to shellwm.completed_size_change() in
there, so use an early return for all cases.

https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1251
2020-06-15 13:12:03 +00:00
Florian Müllner
137e6c8493 windowManager: Allow xwayland startup to complete without systemd
Since commit 0ecddafc20 gsd-xsettings startup has been made conditional
on the systemd user instance being available at runtime. While that is
correct, it means that completing xwayland startup is also conditional
now.

We always want xwayland startup to go ahead, so wait for the XSettings
plugin to appear on the bus when gsd-xsettings is launched by gnome-session
and complete the task immediately if startup fails.

https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1252
2020-05-12 18:05:38 +02:00
Carlos Garnacho
0ecddafc20 windowManager: Handle return value/errors from systemd unit calls
These may produce errors, and return a value indicating we should
proceed further. Check for those when starting/stopping gsd-xsettings.

https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1238
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2755
2020-05-07 12:16:03 +02:00
Florian Müllner
5ec5978d4a windowManager: Fix ngettext() call
We don't pass the number that allows gettext to decide on the
correct string, whoops.

Spotted by Alexandre Franke.

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2649
2020-04-17 22:25:09 +00:00
Carlos Garnacho
72c4f148ef windowManager: Do not shutdown ibus/xsettings on X11 compositor restart
These paths are meant for Xwayland, not for X11 compositors being restarted
through alt-f2 + r. Maybe some signal analogous to init-xserver should be
added for Xwayland shutdown paths, but this signal we are currently
listening for is backend agnostic.

Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/2329
2020-03-11 11:31:45 +00:00
Olivier Fourdan
a96753f085 windowManager: X11 can work without gsd-xsettings
Currently, a failure to start the Systemd unit `gsd-xsettings.target`
would be considered a failure to start Xwayland.

That means that if `gsd-xsettings.target` fails to start for whatever
reason, no X11 client can be used on Wayland.

However, XSettings is by no mean mandatory for X11 clients and many
legacy X11 clients do not implement XSettings. Those who do always have
a fallback path and therefore can still work without XSettings.

Make a failure to start the Systemd unit `gsd-xsettings.target` non
blocking for Xwayland, and just log a warning message.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1065
2020-03-06 18:50:52 +00:00
Carlos Garnacho
104d1ae151 windowManager: Fix shutdown signal connection
This signal relied on mutter changes that were withdrawn
and it was unintended to use here. Restore the usage of
good old MetaDisplay::x11-display-closing.

https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1056
2020-02-29 23:47:46 +01:00
Carlos Garnacho
12e14884ef windowManager: Implement MetaDisplay::init-xserver hook
We do spawn gsd-xsettings, and watch its name before notifying on the
given task, so the mutter bits can proceed with X11 startup.

One notable change is that we only start gsd-xsettings, instead of the
generic gnome-session-x11-services target. We do so as we have to wait
on a dbus name to appear in order to deem the initialization done, and
making it all depend on gsd-xsettings seems tidier.

Less notably, we also use ::shutdown-xserver to shutdown the related
services. Its major benefit is that it'd allow us to ensure the olderly
shutdown of those services, but it's unused at the moment.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/836
2020-02-29 18:58:55 +01:00
Jonas Dreßler
da05c85f3c windowManager: Show window resizing clone on "size-changed"
When a window is being resized by the compositor, with Wayland the
compositor first asks the window to change its size and emits the
"size-change" signal, and then emits the "size-changed" signal after
the window acknowledges the new size. To show a fancy resize animation,
gnome-shell creates a "screenshot" of the resizing window on the
"size-change" signal, and later animates that "screenshot" to the new
window size on the "size-changed" signal.

Now if a client is not responding to our requests asking it to change
its size, we get a "size-change" signal and start showing the
window-clone, but never a "size-changed" signal, animating and hiding
the clone again. This causes a so called "ghost window" that is shown
above everything else and never disappears again.

To fix that, start showing the window clone once we get the
"size-changed" signal instead of the "size-change" signal. This makes
sure the window actually updates its size and the clone is going to be
hidden again.

Fixes https://gitlab.gnome.org/GNOME/mutter/issues/1078

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1055
2020-02-28 18:08:24 +00:00
Daniel van Vugt
c773c8c162 Revert "js/ui: Use Clutter.OffscreenRedirect.ON_IDLE"
This reverts commit c0c027c608. Because for
some reason animating external opacity and position is still incurring
internal repaints, which disables offscreening and makes fading of
overlapping actors look wrong. `ON_IDLE` should be fixed in mutter before
it is used (in boxpointer at least) again.

Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/2270
2020-02-26 11:54:54 +08:00
Daniel van Vugt
c0c027c608 js/ui: Use Clutter.OffscreenRedirect.ON_IDLE
To bypass offscreening in cases where continuous animation is happening.
Offscreening is slower in such cases so this reduces the render time of
animations within offscreenable actors.

On an i7-7700 this reduces the render time of boxpointers for example by
25-30%.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1025
2020-02-21 12:19:15 +00:00
Florian Müllner
9d941f8202 js: Don't use templates in files with translations
xgettext gained some support for template strings, and no longer
fails when encountering '/' somewhere between backticks.

Unfortunately its support is still buggy as hell, and it is now
silently dropping translatable strings, yay. I hate making the
code worse, but until xgettext really gets its shit together,
the only viable way forward seems to be to not use template
strings in any files listed in POTFILES.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1014
2020-02-17 23:20:40 +01:00
Jonas Dreßler
59bd2dd1e3 windowManager: Use shorter string for dialog headline
Since the headlines of the dialogs now use a much larger font, the
strings need to be shorter so they won't be ellipsized.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/942
2020-02-01 08:08:33 +01:00
Jonas Dreßler
20895c7791 windowManager: Cleanup dialog a bit
This doesn't have to be a prompt-dialog, so remove the css class, also
the MessageDialogContent doesn't need the x and y_expand properties, so
remove those, too.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/942
2020-02-01 08:08:33 +01:00
Jonas Dreßler
2fc84e0fe3 dialog: Remove MessageDialogContent.body property
According to the new dialog design, dialogs generally only have a title
and a description, so the `body` property is no longer needed.

At the places where it's still used, we replace it with the description
property or a plain label we add to MessageDialogContent ourselves.

See https://gitlab.gnome.org/GNOME/gnome-shell/issues/1343

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/886
2020-01-15 00:17:25 +01:00
Jonas Dreßler
5d99bdbe5e dialog: Remove icons from dialogs
According to the new mockups, remove the icon from MessageDialogContent

See https://gitlab.gnome.org/GNOME/gnome-shell/issues/1343

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/886
2020-01-15 00:05:34 +01:00
Alexander Mikhaylenko
a8dcfa4656 windowManager: Use SwipeTracker
Replace existing four-finger gestures with SwipeTracker.

Since TouchpadWorkspaceSwitchAction and WorkspaceSwitchAction are now
unused, remove them.

Change programmatic workspace transition to use easeOutCubic interpolator
to match the gesture.

Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/756

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/826
2020-01-10 18:20:22 +01:00
Robert Mader
28d42628d1 windowManager: Always reset window actors when minimize animation is cancelled
This was left out in b6d47c18c. Fixes an occasional warning:
`this._minimizeWindowOverwritten is not a function`

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/911
2019-12-21 15:28:32 +01:00
Florian Müllner
a32c4f30d1 style: Allow lonely ifs where appropriate
We now have a lint rule to disallow lonely ifs, however there are
cases where the "lonely" part mirrors code from the preceding if
clause. Opt out of the lint rule in those cases.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/818
2019-11-11 23:51:17 +00:00
Florian Müllner
e44adb92cf cleanup: Avoid unnecessary parentheses
Extra parentheses usually add noise rather than clarity, so avoid
them.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
2019-11-11 19:25:14 +00:00
Florian Müllner
ebf77748a8 cleanup: Require "dangling" commas
Since ES5, trailing commas in arrays and object literals are valid.
We generally haven't used them so far, but they are actually a good
idea, as they make additions and removals in diffs much cleaner.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
2019-11-11 19:25:14 +00:00
Florian Müllner
c860409da5 cleanup: Use object shorthand where possible
ES6 allows to omit property names where they match the name of the
assigned variable, which makes code less redunant and thus cleaner.
We will soon enforce that in our eslint rules, so make sure we use
the shorthand wherever possible.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
2019-11-11 19:25:14 +00:00