gnome-shell currently initiates an automatic login attempt if
timed login is enabled and the timed login animation completes.
Unfortunately, if animations are disabled (as is the case for
virtual machines) then the timed login animation will complete
instantly, and timed login will proceed immediately after gnome-shell
has noticed the user is idle for 5 seconds.
This commit addresses that problem by initiating timed login and the
animation from a main loop timeout, instead of using the tweener api.
Any symbols (including class properties) that should be visible
outside the module it's defined in need to be defined as global.
For now gjs still allows the access for 'const', but get rid of
the warnings spill now by changing it.
https://bugzilla.gnome.org/show_bug.cgi?id=785084
While we've always considered it good style to initialize JS properties,
some code that relies on uninitialized properties having an implicit
value of 'undefined' has slipped in over time. The updated SpiderMonkey
version used by gjs now warns when accessing those properties, so we
should make sure that they are properly initialized to avoid log spam,
even though all warnings addressed here occur in conditionals that
produce the correct result with 'undefined'.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
The user list uses the same indication for hover and focus, so it
is possible for two items to be highlighted at the same time. Using
different styling would improve the situation, but only to some
extent - the user would still need to figure out which highlight
corresponds to which activation method. So instead, copy the
approach we use in popup menus and use a single property for
highlights that is updated by both focus- and hover changes.
https://bugzilla.gnome.org/show_bug.cgi?id=772284
Some PAM modules say "Press enter to continue" or
whatever. We need to support them.
This commit allows empty responses to PAM questions,
but still requires a non-empty response for username.
https://bugzilla.gnome.org/show_bug.cgi?id=784360
If the user fails to enter their password then hits escape, we
jump back to the user list, then ask again for a password in a
garbled screen. this commit fixes that by skipping a retry if
the operation is cancelled.
https://bugzilla.gnome.org/show_bug.cgi?id=784361
If the user fails to enter their password then hits escape, we
jump back to the user list, then ask again for a password in a
garbled screen. this commit fixes that by guarding against the retry
if the fail counter is reset.
We rely on the service to detect whether a fingerprint reader is
present. It is fine to not support fingerprint authentication
when the service is missing, but currently we don't handle this
case at all and end up with a non-functional login screen.
https://bugzilla.gnome.org/show_bug.cgi?id=780063
It's weird if after you select a username from the user list, there's
a password already filled in.
This commit disables at that feature for the login screen
(but keeps it in tact for the unlock screen)
https://bugzilla.gnome.org/show_bug.cgi?id=766139
When the user gets long failure messages from pam, the authPrompt
message label will clip the message and ellipsize with '…'.
This commit turns off ellipsization from the label, so it will
properly wrap.
https://bugzilla.gnome.org/show_bug.cgi?id=764445
If the user clicks Not Listed? to enter ask for username mode, clicks
cancel, and then attempts to log in via the user list, the user will see
"Authentication failed" after correctly typing the password, and then
will become stuck in an empty screen with just the gray noise background.
The problem is, we forgot to disconnect from the signal that's waiting
for the next button to be pressed on the username entry screen. Since
the signal handler that executes here is expecting the username to be
input, and isn't prepared for us to have switched back to user list,
various bad things happen. We try to start two gdm-password
conversations at once, for instance, one using the user's password as
the username. I stopped investigating here, because it's easy to fix by
disconnecting from the signal at the right time.
https://bugzilla.gnome.org/show_bug.cgi?id=770328
The Next and Sign In buttons are disabled when the username/password
field is empty. However, the user can still bypass this button by
pressing the enter key, leading to some odd glitches with the log in
for 'Not Listed?' users.
This is easy to fix by simply not progressing to the next screen when
the button is disabled.
https://bugzilla.gnome.org/show_bug.cgi?id=746180
Generally a user-changed operation will be uninteresting, but if the
user is currently in the user list and the account changes to locked, we
want to remove it from the list, or if the user is not in the list and
the account changed to unlocked, we want to add it to the list. This
fixes the case where a new user account created in gnome-control-center
does not appear in the user list. The password mode is set in the new
account immediately after it is created, but the operations are not
atomic, so the login dialog considers the new user account when it is
still locked and rejects it from being displayed, then immediately
afterwards the account is unlocked. This commit causes the login dialog
to show the account when this occurs.
The containsUser() check here is not strictly necessary, but reduces
spurious calls to addUser() and removeUser(), since there's no easy way
to check if the locked status of the account has changed (as it's much
easier to connect to one signal on the UserManager than to
notify::locked on each User object).
https://bugzilla.gnome.org/show_bug.cgi?id=758568
LoginDialog has a private _user, but UserListItem has a public user.
Easy to get wrong since _user would be the right thing to type in 90% of
this file.
We currently will always allocate the user list's preferred size, so it
will grow indefinitely and never scroll; limit the height instead to
get the desired scrolling behavior when necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=754525
When the user successfully types their password, we should hide
the spinner from the button well right away, so it doesn't
consume resources until reset (which may happen significantly later
if the user is vt switched away)
https://bugzilla.gnome.org/show_bug.cgi?id=753891
The code previously tried to stop spinner after it was hidden, but
due to an incorrect check was only stoppig it after it was shown.
Also, it was only stopping after hiding due to an animation, and
failing to stop it in the non-animated case.
This left the spinner hidden and running while VT switched away
from the login screen, only stopping when the auth prompt was
reset when switching back.
https://bugzilla.gnome.org/show_bug.cgi?id=753891
We only need the user verifier for the purpose of user verification.
Once it's complete we should clear it so it doesn't get in the way
later.
This fixes a bug introduced in commit 3c8c5a5570 that leads to the
user session crashing when the login screen is reactivated.
https://bugzilla.gnome.org/show_bug.cgi?id=753181
We fade out the authentication prompt when a user successfully
logs into a user session. We reset it and fade it back in when
the user switches back to the login screen VT.
The problem is, we only fade it back in if the auth prompt status is
VERIFICATION_SUCCEEDED. It's possible for it to be NOT_VERIFYING
if the authprompt gets reset for some other reason in the interim.
This commit changes the check to be more precise. We now only skip
the fade-in, if we're already faded in, and we only skip the reset if
we're already reset.
https://bugzilla.gnome.org/show_bug.cgi?id=753181
The user should be allowed to cancel if verification hasn't
started yet and they're typing in their username. This
commit changes the authPrompt cancel function to not
ignore such requests.
https://bugzilla.gnome.org/show_bug.cgi?id=752739
Normally the user isn't allowed to proceed passed
the username question until they've filled it in.
To ensure this, the authprompt code desensitizes
the next button when the number of characters change to
zero.
Unfortunately it fails to desensitize the next button
up front when the entry starts out empty.
This commit addresses that bug.
https://bugzilla.gnome.org/show_bug.cgi?id=752739
If the next button ever gets set to Sign In, it won't
get reset to next until the next question asked by pam.
This commit ensures it gets reset to Next when asking
for the username.
https://bugzilla.gnome.org/show_bug.cgi?id=752739
We currently only cancel the user verifier on reset if
verifying, but that means we don't properly cancel it when
asking for a username at the Not Listed screen.
The object already handles getting called when there is
nothing to cancel, so just cancel it unconditionally.
https://bugzilla.gnome.org/show_bug.cgi?id=752438
It's possible for a user to type their password so quickly
that GDM hasn't even had time to ask for the password yet,
much less have time to process the answer.
In that situation, we tuck the user response away as
_preemptiveAnswer, and pass it along to GDM when GDM is finally
ready for it.
The problem is, there's a bug in the code, where we send
null for the service name in the answer, instead of the right
service name (say "gdm-password").
This commit addresses the bug by making sure we don't pass the
answer along, until the service name is properly set in
_queryingService. To ensure that, answering query (answerQuery)
based on _preemptiveAnswer has been shifted right below
this._queryingService = serviceName;
https://bugzilla.gnome.org/show_bug.cgi?id=737586
If the login screen actors aren't placed at pixel
boundaries then they will show up blurred with fuzzy
text.
This commit ensures all actor allocations are floored
to integer coordinates.
https://bugzilla.gnome.org/show_bug.cgi?id=746912
User read time per character has been changed from 16ms to 48ms because the
message of information about last login is displayed for half a sec that is not
a good user experience. So time to read a character is increased to 48ms from 16ms.
https://bugzilla.gnome.org/show_bug.cgi?id=720885
Currently the menu position below the button means that the menu
can extend to roughly half the screen height before ending up partly
off-screen. This is plenty of space for commonly installed sessions,
but some users have a significantly higher number of sessions in the
list. Move the menu to the side of the button in that case to maximize
the vertical space the menu may take up.
https://bugzilla.gnome.org/show_bug.cgi?id=734352
There's some vestigial code for hiding the user list
that runs at the same time its parent is hidden.
Only the parent should be hidden, at this point, so
there's situations where the user list hides and
never comes back.
This commit fixes that, by deleting the vestigial code.
https://bugzilla.gnome.org/show_bug.cgi?id=719418
We currently use the setActiveSession method to both mark a menu item as
selected, and also tell gdm about the current session the user selected.
Since gdm is ultimately in charge of the state, we should decouple this
and simply ask gdm to set the session, and have the menu item reflect
what gdm thinks is the current session.
This prevents state getting mismatched and oscillations from happening,
where we get in a loop of constantly telling gdm what the session is.
https://bugzilla.gnome.org/show_bug.cgi?id=740142
If a smartcard is missing from the reader when we start up,
and the system is configured to disable password authentication,
then we need to ask the user to insert their smartcard.
This commit fixes that.
https://bugzilla.gnome.org/show_bug.cgi?id=740143
The problem is caused by '_askForUsernameAndBeginVerification' being
called multiply times. So when we click 'next', the old connected
function will also be executed.
