ES6 finally adds standard class syntax to the language, so we can
replace our custom Lang.Class framework with the new syntax. Any
classes that inherit from GObject will need special treatment,
so limit the port to regular javascript classes for now.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/361
When in lockscreen mode there's no point of resetting the auth login as there's
no welcome screen, and that would just cause the UI to freeze, with no reason.
This could have been useful if we were stopping the user to login for a given
time after ALLOWED_FAILURES attempts, but this is not the case yet.
When not using arrow notation with anonymous functions, we use Lang.bind()
to bind `this` to named callbacks. However since ES5, this functionality
is already provided by Function.prototype.bind() - in fact, Lang.bind()
itself uses it when no extra arguments are specified. Just use the built-in
function directly where possible, and use arrow notation in the few places
where we pass additional arguments.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/23
Any symbols (including class properties) that should be visible
outside the module it's defined in need to be defined as global.
For now gjs still allows the access for 'const', but get rid of
the warnings spill now by changing it.
https://bugzilla.gnome.org/show_bug.cgi?id=785084
While we've always considered it good style to initialize JS properties,
some code that relies on uninitialized properties having an implicit
value of 'undefined' has slipped in over time. The updated SpiderMonkey
version used by gjs now warns when accessing those properties, so we
should make sure that they are properly initialized to avoid log spam,
even though all warnings addressed here occur in conditionals that
produce the correct result with 'undefined'.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
If the user fails to enter their password then hits escape, we
jump back to the user list, then ask again for a password in a
garbled screen. this commit fixes that by skipping a retry if
the operation is cancelled.
https://bugzilla.gnome.org/show_bug.cgi?id=784361
If the user fails to enter their password then hits escape, we
jump back to the user list, then ask again for a password in a
garbled screen. this commit fixes that by guarding against the retry
if the fail counter is reset.
We rely on the service to detect whether a fingerprint reader is
present. It is fine to not support fingerprint authentication
when the service is missing, but currently we don't handle this
case at all and end up with a non-functional login screen.
https://bugzilla.gnome.org/show_bug.cgi?id=780063
User read time per character has been changed from 16ms to 48ms because the
message of information about last login is displayed for half a sec that is not
a good user experience. So time to read a character is increased to 48ms from 16ms.
https://bugzilla.gnome.org/show_bug.cgi?id=720885
If a smartcard is missing from the reader when we start up,
and the system is configured to disable password authentication,
then we need to ask the user to insert their smartcard.
This commit fixes that.
https://bugzilla.gnome.org/show_bug.cgi?id=740143
Incorrect braces meant that if the ShellUserVerifier was destroyed before
the call to fprintManager.GetDefaultDeviceRemote(), the reply would result in
an error.
https://bugzilla.gnome.org/show_bug.cgi?id=738256
We only want to react to the card the user logged in with, at
the unlock screen. We check "at the unlock screen" by checking
the "reauthenticating" state variable. That variable is the
wrong one, though. It gets set too late, and in some cases, gets
set at the login screen, too. We should be checking this._reauthOnly
instead.
This commit fixes that.
https://bugzilla.gnome.org/show_bug.cgi?id=726262
oVirt is software for managing medium-to-large scale deployments of
virtual machine guests across multiple hosts. It supports a feature
where users can authenticate with a central server and get
transparently connected to a guest system and then automatically get logged
into that guest to an associated user session.
Guests using old versions of GDM support this single-sign-on capability
by means of a greeter plugin, using the old greeter's extension
API.
This commit adds similar support to the gnome-shell based login screen.
How it works:
* The OVirtCredentialsManager singleton listens for
'org.ovirt.vdsm.Credentials.UserAuthenticated'
D-Bus signal on the system bus from the
'org.ovirt.vdsm.Credentials'
bus name. The service that provides that bus name is called
the oVirt guest agent. It is also responsible for interacting
with the the central server to get user credentials.
* This UserAuthenticated signal passes, as a parameter, the a token
which needs to be passed through to the PAM service that is specifically
set up to integrate with the oVirt authentication architecture.
The singleton object keeps the token internally so it can be queried
later on.
* The OVirtCredentialsManager emits a signal 'user-authenticated' on
it's object once the dbus signal is triggered
* When the 'user-authenticated' signal is emitted, the login screen
tells GDM to start user verification using the PAM service. The
authentication stack of the service includes a PAM module
provided by oVirt that securely retrieves user credentials
from the oVirt guest agent. The PAM module then forwards those
credentials on to other modules in the stack so, e.g.,
the user's gnome keyring can be automatically unlocked.
* In case of the screen shield being visible, it also will react on that
'user-authenticated' signal and lift the shield.
In that case the login screen will check on construction time if
the signal has already been triggered, and a token is available.
If a token is available it will immediately trigger the functionality
as described above.
Signed-off-by: Vinzenz Feenstra <evilissimo@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=702162
This commit detects when a user inserts a smartcard,
and then initiates user verification using the gdm-smartcard
PAM service.
Likewise, if a user removes their smartcard, password verification
(or the user list depending on auth mode and configuration) are initiated
https://bugzilla.gnome.org/show_bug.cgi?id=683437
The duplication makes the function look a lot more complicated
than it actually is.
This commit moves the common code to a new _startService function.
https://bugzilla.gnome.org/show_bug.cgi?id=683437
Currently, fingerprint authentication is always a secondary thing.
If a user wants to swipe their finger when the computer is asking
for a password, so be it.
This commit paves the way for making fingerprint auth optionally
be the main way to authenticate. Currently there's no way to enable
this, but in a future commit will honor
enable-password-authentication=false
in gsettings.
https://bugzilla.gnome.org/show_bug.cgi?id=683437
Right now, the primary way a user logs in is with
a password. They can also swipe their finger, if their
fingerprint is enrolled, but it's expected the fingerprint
auth service won't ask questions the user has to respond to
by typing. As such, we ignore questions that comes from
anything but the main auth service: gdm-password.
In the future, if a user inserts a smartcard, we'll want
to treat the gdm-smartcard service as the main auth service,
and let any questions from it get to the user.
This commit tries to prepare for that eventuality by storing
the name of the default auth service away in a _defaultService variable
before verification has begun, and then later checking incoming
queries against that service instead of checking against
string 'gdm-password' directly.
Of course, right now, _defaultService is always gdm-password.
https://bugzilla.gnome.org/show_bug.cgi?id=683437
When a ShellUserVerifier is asked to verify a user at the login
screen it will transparently first try to reauthenticate the user
against an existing session and then fall back to logging a user
into a new session. The former is used for user switching.
It's useful to know which type of verification is happening, so
the next button can be made to say "Unlock" instead of "Sign In" when
a user is already signed in.
This commit exports a new "reauthenticating" property on the
ShellUserVerifier that the auth prompt checks when deciding which
label to use for its next button.
https://bugzilla.gnome.org/show_bug.cgi?id=704795
Right now there is a lot of duplicated code between the unlock
dialog and the login dialog.
This commit moves the login dialog's auth prompt to a separate
class, so that it can (in a subsequent commit) be used by the
unlock dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=702308
this._clearMessageQueue() is a noop when this.hasPendingMessages is
false so calling it in that case doesn't make sense.
This commit drops that call.
https://bugzilla.gnome.org/show_bug.cgi?id=704347
Right now, if multiple messages come in, they just sort of
clobber each other.
This commit sets up a message queue, and introduces pauses
long enough for the user to hopefully be able to read those
messages.
https://bugzilla.gnome.org/show_bug.cgi?id=694688
Right, the common code between the login screen and
the unlock screen handles clearing the user verifier
when GDM sends a reset.
We don't actually always want to clear the messages on
reset in the unlock case, though, so doing it implicitly
is problematic.
This commit moves the clear() call from the common code
to the specific reset handlers.
https://bugzilla.gnome.org/show_bug.cgi?id=694688
