As arrow functions have an implicit return value, an assignment of
this.foo = bar could have been intended as a this.foo === bar
comparison. To catch those errors, we will disallow these kinds
of assignments unless they are marked explicitly by an extra pair
of parentheses.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/731
We are currently inconsistent whether to put the operators in front
of the corresponding line or at the end of the preceding one. The
most dominant style for now is to put condition and first branch on
the same line, and then align the second branch:
let foo = condition ? fooValue
: notFooValue;
Unfortunately that's a style that eslint doesn't support, so to account
for it, our legacy configuration currently plainly ignores all indentation
in conditionals.
In order to drop that exception and not let messed up indentation slip
through, change all ternary operators to the non-legacy style.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/725
We now do 2 things along Xwayland startup/shutdown:
- Start or stop the gnome-session-x11-services target, that will
pull all X11 related services that the session might depend on.
- As we start ibus-daemon manually, trigger a restart in order to
toggle the XIM daemon on and off along with Xwayland presence.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/680
We may need to restart it with different arguments, so make it
possible to do that. Also, avoid to just restart it on _clear(),
this is now most likely through our --replace call than it is
through ibus-daemon eg. dying, avoids some noise in logs as
there is already an ongoing ibus-daemon.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/680
When plugging in a device with sensors that are unsupported by
iio-sensor-proxy, the proxy may quit so fast that the name disappears
from the bus before we get to construct the SensorProxy in response
to the name-appeared handler, resulting in the following warning:
JS ERROR: TypeError: this._sensorProxy is null
_sensorProxyAppeared/this._sensorProxy<@resource:///org/gnome/shell/misc/systemActions.js:217:17
_makeProxyWrapper/</<@resource:///org/gnome/gjs/modules/overrides/Gio.js:243:21
Address this by creating the proxy unconditionally instead of monitoring
the bus name, and using the g-name-owner property to determine whether
iio-sensor-proxy is active.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1357
GDBusProxy::g-properties-changed is also emitted when the name drops from
the bus, at which point any properties will be null. That's not a valid
gsettings value, so to avoid the corresponding warning, move the g-name-owner
check accordingly.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1158
The different units - seconds for Tweener and milliseconds for
timeouts - are not a big issue currently, as there is little
overlap. However this will change when we start using Clutter's
own animation framework (which uses milliseconds as well), in
particular where constants are shared between modules.
In order to prepare for the transition, define all animation times
as milliseconds and adjust them when passing them to Tweener.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/663
Our current Weather integration depends on poking around the app's
settings, which we cannot do when the app is sandboxed (as its
filesystem is "hidden away" in a container in that case).
So instead, use our own GSettings schema for the settings, and sync
it with GNOME Weather via a custom D-Bus interface.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1158
For GObject properties, we follow the convention of all-lowercase,
dash-separated names. Those translate to underscores in getters/setters,
so exempt them from the newly added "camelcase" rule.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/627
While we aren't using those destructured variables, they are still useful
to document the meaning of those elements. We don't want eslint to keep
warning about them though, so mark them accordingly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/627
Those unused arguments aren't bugs - unbeknownst to eslint, they all
correspond to valid signal parameters - but they don't contribute
anything to clarity, so just remove them anyway.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/627
Now that extension loading and the extensions map are no longer shared
between the gnome-shell and gnome-shell-extension-prefs processes, we
can move both into the ExtensionManager which makes much more sense
conceptually.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Whether or not an extension can be enabled/disabled depends on various
factors: Whether the extension is in error state, whether user extensions
are disabled and whether the underlying GSettings keys are writable.
This is complex enough to share the logic, so add it to the extension
properties that are exposed over D-Bus.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Serializing an extension for sending over D-Bus is currently done by the
appropriate D-Bus method implementations. Split out the code as utility
function and add a corresponding deserialization function, which we will
soon use when consuming the D-Bus extension API from the extension-prefs
tool.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
It makes sense to keep extension-related enums in the same module instead
of spreading them between ExtensionSystem and ExtensionUtils.
More importantly, this will make the type available to the extensions-prefs
tool (which runs in a different process and therefore only has access to
a limited set of modules).
https://bugzilla.gnome.org/show_bug.cgi?id=789852
The first parameter to Object.assign() is the same target object that
will be returned. That is, since commit 46874eed0 Params.parse() modifies
the @defaults object. Usually we pass that parameter as an object literal
and this isn't an issue, but the change breaks spectacularly in the few
cases where we use a re-usable variable.
Restore the previous behavior by copying the object first.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/615
Standard javascript now has Object.assign() which is very similar to
Params.parse(), except that the latter by default disallows "extra"
parameters. We can still leverage the standard API by simply
implementing the error check, and then call out to Object.assign()
for the actual parameter merging.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/612
Braces are optional for single-line arrow functions, but there's a
subtle difference:
Without braces, the expression is implicitly used as return value; with
braces, the function returns nothing unless there's an explicit return.
We currently reflect that in our style by only omitting braces when the
function is expected to have a return value, but that's not very obvious,
not an important differentiation to make, and not easy to express in an
automatic rule.
So just omit braces consistently as mandated by gjs' coding style.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
While we have some style inconsistencies - mostly regarding split lines,
i.e. aligning to the first arguments vs. a four-space indent - there are
a couple of places where the spacing is simply wrong. Fix those.
Spotted by eslint.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
We are currently inconsistent on whether case labels share the same
indentation level as the corresponding switch statement or not. gjs
goes with the default of no additional indentation, so go along with
that.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
Starting an object literal with a comment throws off eslint's rules
for brace style (newline between brace and properties for both opening
and closing brace or neither) as well as indentation (fixed four-space
indent or align with the previous argument).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
We are currently inconsistent with whether or not to put a space
after catch clauses. While the predominant style is to omit it,
that's inconsistent with the style we use for any other statement.
There's not really a good reason to stick with it, so switch to
the style gjs/eslint default to.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/607
