While _sync() does already handle the case where there's no adapter just
fine (hiding the item and the indicator), let's make the handling a bit
more obvious and add an explicit check for !this._adapter where we bail
out and hide the UI.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2188>
There's two ways bluetooth can be powered off/on for us: One way is to
go via airplane mode (which uses rfkill), and the second way is to tell
BlueZ to turn off the device. Now rfkill always has the final say on
whether bluetooth is off, BlueZ OTOH has the final say on whether
bluetooth is on.
This means when we want to know whether bluetooth is turned on, we only
have to ask BlueZ, so simply read this._client.default_adapter_powered
for that.
For turning bluetooth on or off we use rfkill, but when turning it on,
make sure it's turned on in Bluez, too.
FTR, this is exactly the same way the Bluetooth panel in Settings
handles this.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2188>
The indicator shows the recording duration and lets the user stop it on
click. It is more discoverable than the stop entry in the aggregate
menu.
The class extends ButtonBox directly rather than Button because Button
does nothing that it uses, and actually causes issues with its dummy
menu (its vfunc_hide() throws an "open-state-changed: Error: incorrect
pop").
The menu-set signal declaration is required by the panel.
The screencast is stopped upon button press in vfunc_event(), which
matches PanelMenu.Button's input handling.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2163>
If the finish function isn't specified, promisify will now try
to use the async name without '_async'/'_begin' suffix (if any)
and '_finish' appended.
Everything except IBus uses a variation of that pattern, so there's
quite a bit of boilerplate we get to remove…
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2174>
With the new boolean setting, the "High Contrast" toggle can now
simply toggle the setting instead of the current gtk/icon-theme
shenanigans.
This isn't only much simpler, but will also make switching between
high-contrast and a non-default theme reliable at last.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2069>
This is specifically for stopping the screenshot UI screencasts for now.
It's possible to stop arbitrary screen recording handles, however due to
an issue with pipewiresrc, this method cannot currently work for cleanly
stopping Shell's own screen recordings. Hence the best we can do is to
handle just the screenshot UI screencasts to let them stop cleanly.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2103>
There is now a location portal that provides a similar role
as our agent. Settings supports that portal in its application
panel, which allows users to revisit their choice later.
Unfortunately it uses a different permission store table, so
any permissions granted (or denied) through our agent won't
show up there.
To change that, switch to the same table as the portal/Settings.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1945>
Before this, creating a separate instance of `Location.Indicator` failed
because it tries to create export the same DBus path.
This is useful for extensions adding panels on multiple monitors. But
it also seems like a cleaner design to separate the indicator widget
from the logically separate role as a Geoclue agent.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1919>
We currently disable all network items on both the lock- and login
screen. While it makes sense to be very restrictive on the lock screen,
there are some (fringe) use cases for being more permissive on the
login screen (like remote home directories only accessible via VPN).
There's precedence with the power-off/restart actions to be less
restrictive on the login screen, and since we started respecting
the `network-control` polkit action, it's possible to restore the
old behavior if desired.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1874>
NetworkManager installs a `network-control` polkit action that can
be used to disallow network configuration, except that we happily
ignore it. Add it to the conditions that turn a network section
insensitive.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1874>
Setting up a connection for an Enterprise WPA(2) encrypted wireless
network requires Settings. That's not available when windows are
disabled via the session mode, so filter out affected entries.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1874>
The item launches the corresponding Settings panel when activated, which
doesn't work when windows are disabled by the session mode. Rather than
failing silently, turn the item insensitive.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1874>
The parameter to `ModalDialog.close(timestamp)` is optional. But when
invoked via the network dialog's Cancel button it was receiving an
implicit parameter value that's definitely not a timestamp:
```
[0x560f18af0c50 StButton.modal-dialog-linked-button:first-child hover ("Cancel")]
```
And as of today (or gjs >= 1.67.3) that's reported as an error:
```
JS ERROR: Error: Argument timestamp: value is out of range for uint32
popModal@resource:///org/gnome/shell/ui/main.js:638:12
popModal@resource:///org/gnome/shell/ui/modalDialog.js:206:14
close@resource:///org/gnome/shell/ui/modalDialog.js:179:14
```
and so you can't Cancel the dialog anymore.
Make sure `ModalDialog.close()` receives an `undefined` timestamp it
knows how to handle.
Fixes: https://bugs.launchpad.net/bugs/1918666
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1757>
This get's rid of the single-indicator introduced in one of the latest
commits. This was causing the accessibility pill in the top panel
to have different padding from the keyboard layout pill.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1615>
A side effect of removing the action buttons in favor of a regular
submenu is that we are a lot less constrained by size. So instead
of lumping "Restart" in with "Power Off", make it a separate menu
item.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2202
For more obscure network configurations, we need to launch the
corresponding Settings panel with additional parameters, so we
cannot simply launch the .desktop file.
However we can do better than spawning a command line: Control center
exposes an application action we can use instead, so the process is
launched with the appropriate activation environment and startup
notification support.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1385
This fixes an issue where the indicator can be out of sync until the
RfkillManager (used by it) properties change.
The problem is that multiple instances of the indicator will use
the same RfkillManager instance (getRfkillManager() returns a singleton)
that only guarantees to emit the changed signal in two scenarios:
when the D-Bus proxy connects and when the proxy properties change.
If by the time an indicator is instantiated the RfkillManager's D-Bus
proxy is already connected, that indicator would only sync its state
when the RfkillManager properties change.
Let's fix that by always syncing the state on construction - in the worst
case scenario the RfkillManager's D-Bus proxy won't have connected yet
and the indicator state will be temporarily out of sync but once it gets
connected the indicator will sync again with the correct state.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1386
Move the screencasting into a separate D-Bus service process, using
PipeWire instead of Clutter API. The service is implemented in
Javascript using the dbusService.js helper, and implements the same API
as was done by screencast.js and the corresponding C code.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1372
If a remote access is marked as a recording, visualize it the same way
as a built in recording. Also don't stop it if there is an actual screen
sharing going on, so that one can use a plain "recording" while still
disabling what is an actual screen sharing.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1372
The current microphone indicator only indicates if the microphone is in
use. Users might be also interested if their microphone is recording
or is muted, this commit enables that without opening the pop-up
menu. The microphone icon changes itself, depending on the sensitivity
of the microphone. It behaves similar to the already existing volume
indicator.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2902
Sliders can be operated by mouse scroll, but the mouse has to be over
the slider control. Make the brightness and volume system menu entries
forward scroll events to the sliders they contain so that scrolling
anywhere on the menu item operates the slider.
Closes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2795
While we now deal more gracefully with adapter removals, we can
still mess up the hadSetupDevices tracking:
As adapters become available before any devices, we'll always
reset the setting to false when Bluetooth is turned on. And if
no set up device happens to be in range, it will still be false
when Bluetooth is turned off again.
To address that, only update the setting if we have an adapter
(like we do now) and we had one before (so it wasn't the adapter
itself that changed).
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1174
Our intended behavior when bluetooth is turned off is to keep
the menu visible if devices had been set up previously.
However since gnome-bluetooth@c437c729, devices are removed
first before removing the default adapter, so we now end up
always setting the property to false before checking for it.
Fix this by deferring all model changes to an idle, so that
we can process them as a unit. Do the same for proxy property
changes, as those may trigger a row-removal.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1174
Since commit 26c2cb9f65, nDevices is always the actual number of
paired/trusted devices. So when bluetooth is turned off, it is
now 0 rather than forced to 1 if devices were set up previously.
Fix this by checking the property that tracks set up devices instead.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1174
In case where only one device is connected, we want to display its name
in the menu. For that we will need more than the number of known/connected
devices, so change the function to return an array of device infos instead.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2340
Promises make asynchronous operations easier to manage, in particular
when used through the async/await syntax that allows for asynchronous
code to closely resemble synchronous one.
gjs has included a Gio._promisify() helper for a while now, which
monkey-patches methods that follow GIO's async pattern to return a
Promise when called without a callback argument.
Use that to get rid of all those GAsyncReadyCallbacks!
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1126
Since commit 2894085c45 we omit sound feedback on volume changes
if something is already outputting sound. Unfortunately that
"something" may be our own feedback (from a previous volume
change).
In that case we do not want to omit the new feedback, so instead
cancel the previous one.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1147
There are two ways for applications to provide a high contrast icon:
1. install an icon into the HighContrast theme
2. install a symbolic icon into the default hicolor theme
The latter is preferred nowadays, and implemented in the high-contrast
CSS variant by enforcing the symbolic icon style.
However together with the way we currently enable/disable high-contrast,
this can lead to the following race:
1. the GTK theme is changed from HighContrast
2. we reload the default stylesheet
3. the icon style changes to "regular", so we request a
new icon from the HighContrast icon theme
4. the icon theme is changed from HighContrast
5. we evict existing icons from the cache
6. we reload icons for the new icon theme; however as we
find a pending request (from 3), we re-use it
7. the request from 3 finishes, and we end up with a
wrong icon in the cache
The simplest fix is to change the icon theme before the GTK theme: Unlike the
theme name, the icon style is encoded in the cache key, so we won't re-use
an old (and incorrect) request in that case.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2414
xgettext gained some support for template strings, and no longer
fails when encountering '/' somewhere between backticks.
Unfortunately its support is still buggy as hell, and it is now
silently dropping translatable strings, yay. I hate making the
code worse, but until xgettext really gets its shit together,
the only viable way forward seems to be to not use template
strings in any files listed in POTFILES.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1014
Commit 147a743d8d moved the suspend and power-off actions into
the submenu that contains the log-out and switch-user actions,
but did not update the submenu visibility logic to account for
the additional actions.
As a result, the submenu is hidden when log-out and switch-user
are unavailable (like on the login screen), even if suspend and
power-off are enabled.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2169
Since the orientation lock menu entry is a proper menu entry instead of
a icon-only button now, we also show a description-text for that entry,
so update this text depending on whether orientation is locked or not to
better reflect what clicking the menu entry will do.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/964
Since the last commit we set the gicon property of StIcon to NULL if an
empty string was given when setting the icon name, this means
`st_icon_get_icon_name()` will return NULL instead of an empty string.
When `getIndicatorIcon()` returns an empty string, the icon_name
property will now be set to NULL, so compare it to NULL here.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/888
gnome-settings-daemon doesn't play the volume change sound when
the volume stayed the same (that is, it is already at its maximum
or minimum). This looks like the right thing to do, so copy its
behavior.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/53
Commit 8d4855f100 accidentally removed the volume change feedback
for scroll events. Add it back to be consistent again with moving
the slider via arrow keys, slider drags/clicks and gsd's media keys
handling.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/53
Since ES5, trailing commas in arrays and object literals are valid.
We generally haven't used them so far, but they are actually a good
idea, as they make additions and removals in diffs much cleaner.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
ES6 allows to omit property names where they match the name of the
assigned variable, which makes code less redunant and thus cleaner.
We will soon enforce that in our eslint rules, so make sure we use
the shorthand wherever possible.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
I've observed that UPower can occasionally report a charge level of 100%
while the state is still "charging". This usually doesn't last very long
but it is noticeable because the power icon changes to a "missing icon"
icon. This will handle that rare case correctly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/814
Clutter originally cluttered its namespace with key symbols, before
prefixing all symbols with KEY. We still use the unprefixed symbols
occasionally, replace them so mutter can drop the deprecated symbols.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/808
Every since commit aa394754, StBoxLayout has supported ClutterActor's
expand/align properties in addition to the container-specific child
properties. Given that that's the only container left with a special
child meta, it's time to fully embrace the generic properties (and
eventually remove the child meta).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/780
