The run dialog uses the "development_tools" gconf key to determine
whether funcions like "lg" or "restart" should be enabled, but it
failed to notice it on the run when said key changed. This commit
fixes this.
There are now 3 code paths in decreasing speed:
First, optimize subsearching more by just hiding the actors
that didn't match, since we know the ordering has to be right.
For initiating a search (or backspacing an existing one), again
instead of destroying and recreating actors, just temporarily
remove them and re-add them in the desired order.
Finally for when data has changed, use the old code path of
destroying all actors. (This itself could obviously be optimized
if we had a way to know that just one application changed, but
at the moment we don't).
https://bugzilla.gnome.org/show_bug.cgi?id=596119
We queue a 150ms timeout when the user starts typing to avoid searching
for the first keystroke. However, this caused us to change to the search
mode, but show the leftover state of the search displays from an
earlier search state.
Instead, just hide the results sections until we've actually performed
the current search once.
https://bugzilla.gnome.org/show_bug.cgi?id=596119
This is probably not the biggest optimization that needs to be
made at least for application searching, but we can optimize the
case where we're going from a search of "fi" to "fire" by just
re-searching the list of things we already had that matched "fi"
instead of looping over everything.
https://bugzilla.gnome.org/show_bug.cgi?id=596119
This fixes a regression where we weren't using the correct event
timestamps, because for both of these we were sending an XClientMessage
to ourself.
https://bugzilla.gnome.org/show_bug.cgi?id=596262
First eliminate the variable WELL_ITEM_HSPACING since it was 0
and thus effectively was not used.
Add a new variable WELL_ITEM_MIN_HSPACING which is the minimum
space between grid items we allow. When computing layout, allow
for a number of columns less than 4 by using the minimum item
size.
https://bugzilla.gnome.org/show_bug.cgi?id=595023
Based on a patch from Colin Walters.
For various reasons I'd like a method which allows evaluation; say
log in from another machine and run "gnome-shell --repl" or something.
Also as a possible solution for the screensaver X grab issue, add
a (read/write) property "OverviewActive".
https://bugzilla.gnome.org/show_bug.cgi?id=596102
The menu is needed by the app switcher as well as the overview, so
make it slightly more generic and move the code to appIcon. Also add
support for drawing the menu either to the right of or below the icon.
https://bugzilla.gnome.org/show_bug.cgi?id=590563
Rather than having the mapping from window into "slots" (or
possible positions in the workspaces) be dependent on stacking
order, compute the minimum-motion which is a vector from one
top left corner to another. This order won't change as long
as the window set and their positions stay fixed.
There are two minimum motion algorithims; one simply computes
all possible placements by permuting the window list, up to
a current maximum of 5 windows. Past that (which also happens
to be the number where we switch to a grid), we use a "greedy"
algorithm which for each slot, finds the window with least motion
for that slot.
To break any ties, we use an internal integer in MetaWindow which
enumerates the order in which windows were created.
https://bugzilla.gnome.org/show_bug.cgi?id=582654
The "lightbox" effect had support for highlighting a particular
rectangular region on the taskbar when Alt-Tabbing to a minimized
window. Since we no longer use the taskbar, this code is just cruft
now.
Part of https://bugzilla.gnome.org/show_bug.cgi?id=590563
Refactor the current menu code to support both window selection
and "normal" menu items. Add a "New Window" item which does what
you'd expect.
Clean up the way we handle highlighting the window items to be
more direct; rather than looping over all items in most cases,
just directly manipulate one item
https://bugzilla.gnome.org/show_bug.cgi?id=594557
There are few uses for being able to exit the shell directly; my
current one is that the gtype debug infrastructure is implemented
as an atexit() handler.
This isn't a long-term solution; what we really want is for Alt-F2 to
just be an application search with a hack to detect shell commands,
but in the short term this allows us to run the magic 'lg' command
from the overview.
https://bugzilla.gnome.org/show_bug.cgi?id=595116
Rename beginModal/endModal to pushModal/popModal. All of the current callers
just want to ensure that we're in a modal state; they don't actually need to
fail if we already are.
These functions also now take the Clutter keyboard focus, while recording
the previous focus.
https://bugzilla.gnome.org/show_bug.cgi?id=595116
When we had a filtered set of windows, and want to exit the overview
into a particular window, what we do is re-show all the old windows
first, but don't reset the scaling on them. This will involve
some overlapping, but that's not a big deal because we'll immediately
get overlap anyways in the normal case zooming the windows back.
https://bugzilla.gnome.org/show_bug.cgi?id=594699
When the user click+hold+release over the icon, the effect we want
is for the menu to stick around.
Also, allow the user to mouse over the actual windows and select
them directly. If the user mouses over a window, reflect that in
the menu.
https://bugzilla.gnome.org/show_bug.cgi?id=594699
Callers will generally expect _popup and _popdown to be a no-op if
the menu is already in that state; make it so.
Also change the 'popdown' signal to be 'cancelled'; this is
clearer and allows us to avoid having activate also call popdown.
https://bugzilla.gnome.org/show_bug.cgi?id=594699
There are ton of different kinds of mouse even handlers in the overview;
WindowClone has several mouse-enter/leave handlers, we still have a variety
of classes not ported to ButtonBox and so incorrectly handling double-click,
etc.
Since we at present don't have anything in the overview area for which
it makes sense to interact with during the animation, create a transparent
event-eating box which we raise to the top during the animation.
https://bugzilla.gnome.org/show_bug.cgi?id=594074
controls if there is only one page of results
This makes the search results display more streamlined.
Make sure that we move the selection to a different section if we are going
from displaying a single section to displaying all and the section that
used to be displayed alone doesn't have any results.
When the user click+hold+release over the icon, the effect we want
is for the menu to stick around.
Also, allow the user to mouse over the actual windows and select
them directly. If the user mouses over a window, reflect that in
the menu.
We will be adding more search results sections, so we should store the intended
order of the search results sections and their properties in an array of data
structures.
This information allows us to have generic code for creating the search results
sections, moving the selection between them and transitioning between showing
all sections and a single section.
Rather than starting lightboxing only when the mouse enters the
menu, start it when an application filter is set.
Also delete a stale function in WindowClone from previous work.
http://bugzilla.gnome.org/show_bug.cgi?id=594555
Before Clutter gained accessors for event information, we had
shell_global_ functions. Now that Clutter has them, use them and
delete the ShellGlobal code.
http://bugzilla.gnome.org/show_bug.cgi?id=594561
Show the errors to the user instead of silently logging them to the terminal,
also rework positioning to get rid of magic numbers.
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
http://bugzilla.gnome.org/show_bug.cgi?id=593840
When we have multiple windows for an application, implement the following
behavior:
* On click + immediate release, go to the most recently used
* On click, hold for 0.6s, pop up a menu with windows, filtering
the window list to just those windows.
Mouse over on the window list highlights the moused-over window.
Implement this by splitting well item into InactiveWellItem
and RunningWellItem, sharing a base class BaseWellItem.
Checking if an item is under the pointer by calling stage.get_actor_at_pos()
synchronously will trigger a too-early allocation of the stage. Use an idle
at Meta.PRIORITY_BEFORE_REDRAW. (Before 553503d it was using a 5 msec timeout,
553503d made it synchronous.)
http://bugzilla.gnome.org/show_bug.cgi?id=592608
Display the mounted volumes in the places section of the overlay.
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Signed-off-by: Colin Walters <walters@verbum.org>
For some use cases we have other behavior on mouse press and want
to manually control when a drag starts. Split out the drag initiation
code into startDrag.
There is no need to show two headers when we are only displaying a single
section of search results, so we merge the section header with the main
header in that case.
Show a back button on the left of the main header to get back to the results
for all sections.
Remove this._showTooltip flag from SearchSectionHeader because we no longer
show this type of header when we want to suppress the tooltip.
Add this._appSearchResultsOnlyShown and this._docSearchResultsOnlyShown
flags to track when a single section is shown more cleanly.
We no longer need the timeout for checking if an item is drawn under
the pointer because we display search results in the main pane and there is
no lowering/raising of other overview actors going on as the results are
being displayed.
Select an item by default when the search results are displayed.
Enable moving from one section of search results to another with key navigation.
Reset the selection when the search is updated or a new page is displayed
or the transition between viewing multiple sections and viewing just one is made.
The windows we considered for both the app monitor and the overview
workspaces were the same, but the code was duplicated once in C, once
in Javascript.
Make Button class purely about adding visuals, and use ShellButtonBox
for behavior. API equivalences:
shell.button => shell.actor [for consistency]
staysPressed parameter to constructor => replaced by manually setting
the 'active' property of button.actor as appropriate
pressIn/release => button.actor.active = true/false
enter-event/leave-event signals => button.actor notify::hover
Along the way, this fixes a bug with the user status menu where it was
not getting set to active because the button was getting a leave
(triggered by the menu popping up and grabbing the pointer) before for
button release, which disabled the staysPressed behavior.
Reported by Michael Meeks
http://bugzilla.gnome.org/show_bug.cgi?id=593471
Use bigger font and brighter color for the search results section headers.
Add more padding.
Display "(see all)" tooltip in the section headers on mouse-over.
(Still TODO: supressing that tooltip when all results are already being shown.)
All our font sizes were in px, other than the size for the text in
the search entry. Switch that from 12 to 16px (which is the same size
at the standard 96dpi), it doesn't become out of scale if the DPI
is different. (Using fixed px sizes isn't probably what we want to
do in the long term; moving to style sheets will be a good place to
fix that. But better to be consistent.)
http://bugzilla.gnome.org/show_bug.cgi?id=593212
When we are modal, examine keypresses and look for:
- 'Print': Run the screenshot command in any mode; very useful for
bug filing, reviews, etc.
- Release of Super_L/Super_R - if in the overview, toggle back
out of the overview.
http://bugzilla.gnome.org/show_bug.cgi?id=593427
shell-global.[ch]: Add shell_global_display_is_grabbed() that
uses the newly added meta_display_get_grab_op() to check
for existing grabs.
shell-status-menu.[ch]: Add shell_status_menu_is_active() to
check if the menu is popped up. Check for active grabs before
popping the menu up. Use gtk_menu_popdown() rather than
gtk_widget_hide(). Remove an excess gtk_widget_show() and
some excess casts.
panel.js: Check whether the status menu is popped up after button
release, and if it's not popped up, unhighlight the button.
Reported by Nuno Donato
http://bugzilla.gnome.org/show_bug.cgi?id=593362
For Firefox/OpenOffice, right now we have a workaround in the
code where we look at their "title" property. However, we
weren't monitoring that property for changes, and I'm fairly
certain Firefox at least was mapping a window and then very
quickly changing its title after. So we need to handle
dynamic changes.
Split out the wm_class mapping from the title hack. It was
messy and weird to have the two mixed because they're not
at all related, and we're not trying to handle WM_CLASS changes
right now.
Explicitly connect to notify::title in the case where we had
a title fallback. When a title changes, just treat it as
an add+remove.
In the Application Menu area in the panel, hook up to app-added
and app-removed so we get notification of the active app changing.
Display only first page of search results by default for each section and
allow clicking on the section header to view all the results for a given
section. This design will allow us to easily move from paging to scrolling
without having to stack multiple scrollbars in a single pane.
Display a total results count next to the section name. This serves as an
indicator that there are more results. The section header pre-lights to
indicate that it can be clicked on.
Make sure we go back to the first page of results when we exit a single
section mode. Make sure we re-instate all result sections if the search
mode is left.
Close the only section search mode on Esc, and only close the search
when Esc is hit again.
We now have functionality in Mutter to grab the keyboard on behalf
of a plugin. This avoids interactions with the key handling code
in Mutter that could leave the user with an inconsistent state
and no way to get out of it.
src/shell-global.[ch]: Change shell_global_grab_keyboard() and
shell_global_grab_keyboard() to shell_global_begin_modal()
shell_global_end_modal() and call mutter_plugin_begin_modal()
mutter_plugin_end_modal() rather than directly grabbing the
keyboard.
main.js: Call global.begin_modal/end_modal from Main.startModal()
and Main.endModal()
altTab.js; Remove call to Main.startModal() - we're letting Mutter
handle modality for Alt-Tab.
main.js lookingGlass.js overview.js runDialog.js: Rename
Main.startModal() to Main.beginModal() for consistency with
naming in mutter and ShellGlobal.
http://bugzilla.gnome.org/show_bug.cgi?id=590686
Display search results in the dash instead of showing them in a separate pane.
We get dynamic allocation for the section height based on the number of
results, but a lot of the problems with the previous search results display,
such as displaying empty sections and paging overflow are still present.
Also, we don't yet close the browse pane for applications or documents when
we display the search results and only replace it if we are showing the
details pane, so all that looks weird. We'll need to work out the interaction
for these cases.
This fixes a bug where we were already using this._hotCorner
in _onHotCornerEnvironsLeft() and were incorrectly setting
this._hotCornerEntered to false when the hot corner was
re-entered from the environs.
Rather than just launching if we weren't already running, always
relaunch, which happens to make Firefox, etc. work. See
the comment in the commit for more explanation.
Add drag and drop. We need to be able to recreate the icon texture,
so instead of passing it directly into PlaceDisplay, pass
a factory function which knows how to create a new texture.
The design has smaller icons in two columns. Add a new
custom display to docDisplay for it.
Clean up some of the texture cache handling for recent URIs so
it's not size-dependent, since the dash size is now different
from the default GenericDisplay size.
We had multiple copies of the code to position a drag actor given a particular
source. Instead, just put it inside dnd.js.
Second, rather than test for GenericDisplay/WellDisplayItem etc.,
in various places, add a new method on each source "shellWorkspaceLaunch"
which both marks the item as being droppable on a workspace, and is
called by the workspaces code to launch the item.
Use MetaGroup for a window when looking up applications. If
we know the application for a TYPE_NORMAL window in the group,
use that.
However, we aren't always going to know the application for a window. In
that case, create a fake one.
ShellAppInfo has a "transient" flag so we know not to write these
fake apps to the usage file.
Clean up the idle focus handler to better handle the case where
no window is focused, and where we don't want to track the
particular window.
Update track_window to create the fake window.
When a window goes away, we want to delete the usage.
Rewrite shell_app_monitor_get_running_apps to be based
on the window_to_app hash, because that's what has the pointer
to ShellAppInfo*. Before we were looking up all ids through
ShellAppSystem, but that shouldn't be holding a ref to transients.
Change the well display icon to be centered, since our icons for
window apps aren't 48 pixels.
Using a larger area around the hot corner to decide if the user has left the
hot corner prevents triggering the hot corner multiple times due to an
accidental jitter.
We need to use the -lib variant which in turn uses the
GETTEXT_PACKAGE define, because the default translation
domain is actually mutter, not gnome-shell.
