While we've always considered it good style to initialize JS properties,
some code that relies on uninitialized properties having an implicit
value of 'undefined' has slipped in over time. The updated SpiderMonkey
version used by gjs now warns when accessing those properties, so we
should make sure that they are properly initialized to avoid log spam,
even though all warnings addressed here occur in conditionals that
produce the correct result with 'undefined'.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
The user list uses the same indication for hover and focus, so it
is possible for two items to be highlighted at the same time. Using
different styling would improve the situation, but only to some
extent - the user would still need to figure out which highlight
corresponds to which activation method. So instead, copy the
approach we use in popup menus and use a single property for
highlights that is updated by both focus- and hover changes.
https://bugzilla.gnome.org/show_bug.cgi?id=772284
It is possible to use the scroll wheel to adjust the volume without
opening the system menu, but there is no feedback other than the
icon itself in that case. To provide a less coarse indication for
the volume level, display the OSD window when adjusting the volume
while the slider isn't visible.
https://bugzilla.gnome.org/show_bug.cgi?id=781028
Since commit 2c070d38, we add a ClickAction to the visible AltSwitcher
button to track long-presses. As a result, we now have two components
that will grab and ungrab the pointer for the button, so to make sure
we don't end up with a stuck grab, we need to release the second's
component grab when the first activates.
Currently we only drop the StButton grab on long-press, we also need
to cancel any initiated long-press on click.
https://bugzilla.gnome.org/show_bug.cgi?id=781738
Some PAM modules say "Press enter to continue" or
whatever. We need to support them.
This commit allows empty responses to PAM questions,
but still requires a non-empty response for username.
https://bugzilla.gnome.org/show_bug.cgi?id=784360
If the user fails to enter their password then hits escape, we
jump back to the user list, then ask again for a password in a
garbled screen. this commit fixes that by skipping a retry if
the operation is cancelled.
https://bugzilla.gnome.org/show_bug.cgi?id=784361
We currently assume that window state changes are accompanied by an
allocation change (triggered for example by the minimize animation).
However this misses the case where a window actor is simply hidden
without any transition, as is the case with the 'show-desktop' action
for instance, so start tracking plain visibility changes as well.
https://bugzilla.gnome.org/show_bug.cgi?id=783975
While the string returned by formatTime() should follow the locale's
text direction as a whole, the actual time part is always expected
to put hours on the left and minutes to the right. It is possible to
enforce that by inserting a left-to-right mark, but so far this is
only done by the Hebrew translation. So in order to not require all
other RTL translations to be fixed individually, just insert the
mark into the returned string ourselves like gnome-desktop's WallClock
code does[0].
[0] https://git.gnome.org/browse/gnome-desktop/tree/libgnome-desktop/gnome-wall-clock.c?h=gnome-3-24#n267https://bugzilla.gnome.org/show_bug.cgi?id=784130
There were some source IDs that were not being reset to zero when
removing the associated sources, resulting on some critical errors
being dumped when _realRecalculateWindowPositions() got called
after that point, via _delayedWindowRepositioning().
Ever since commit b8e29ae8c7
(I think), start up is littered with this message:
Gjs-WARNING **: JS ERROR: could not get remote objects for service
org.gnome.SettingsDaemon.Smartcard path
since gnome-shell is now started before gnome-settings-daemon.
This commit addresses the problem by making the object manager code
not try to autostart its proxy, and instead wait for it to appear.
https://bugzilla.gnome.org/show_bug.cgi?id=772589
If the user fails to enter their password then hits escape, we
jump back to the user list, then ask again for a password in a
garbled screen. this commit fixes that by guarding against the retry
if the fail counter is reset.
This effect will only be created when the StScrollView actor has either
a non-zero vertical or horizontal fade offset defined, so we need to
add a null-check in these two cases before assuming it's there.
https://bugzilla.gnome.org/show_bug.cgi?id=783823
Gjs-Message: JS WARNING: [resource:///org/gnome/shell/portalHelper/main.js 360]: reference to undefined property top.uri
is caused by the URI variable actually being called "url".
https://bugzilla.gnome.org/show_bug.cgi?id=783286
When using an SSH tunnel (through a SOCKS proxy) to funnel all
the outgoing traffic, we need the captive portal to not go through that
proxy, otherwise we can't go through the proxy because we're not
connected to the Internet and we can't go through the portal because
we're not connected through the proxy.
This fixes a blank captive portal window and no error reporting in that
particular configuration.
https://bugzilla.gnome.org/show_bug.cgi?id=769692
The .solid style isn't supposed to apply for modes that don't support
windows, but for this to work we have to update the style on session
mode changes.
https://bugzilla.gnome.org/show_bug.cgi?id=783202
Commit b929320d4 added a toolbar item to force garbage collection,
however it won't be visible for most users, as it uses a non-standard
legacy icon name (the default icon theme dropped it as far back as 2009).
https://bugzilla.gnome.org/show_bug.cgi?id=782982
The fullscreen animation code is now generic enough to handle any
size change animations, so stop limiting it to (un)fullscreen to
get animations on (un)maximize as well.
https://bugzilla.gnome.org/show_bug.cgi?id=766685
Currently, the translation values are set with the assumption that
one of the actors represents a fullscreen window. In order to
generalize it for any size change transition, we can simply swap
the monitor rect with the source or target rect as appropriate,
and translate the actor from the target to the source position by
subtracting the former and adding the latter.
https://bugzilla.gnome.org/show_bug.cgi?id=766685
Since there is already targetRect that represents where the
window is going to move, rename oldRect to sourceRect to
represent from where the window is moving.
https://bugzilla.gnome.org/show_bug.cgi?id=766685
If the popup happens to be mapped beneath the pointer, mutter will now
emit an implicit enter notify event (i.e. not caused by pointer motion).
In this case the switcherPopup still goes and selects the item, which
results in too sensitive alt-tab menus if the pointer happens to be in
the wrong place.
Make highlighting rely on motion events instead, so it always involves
user interaction when triggered by the pointer.
https://bugzilla.gnome.org/show_bug.cgi?id=755164
The solid black top bar we currently use works well for maximized
or tiled windows, as it puts focus on the application content by
blending into the monitor bezel. However it also visually reduces
the screen space, which is particularly noticeable when no window
is located nearby. Having the top bar blend with the background is
a better option in that case, so track window positions and add
some transparency when the top bar is free-floating.
https://bugzilla.gnome.org/show_bug.cgi?id=747163
And merge with the "internal" show/hide() ones. Those functions don't
proxy dbus method calls anymore, so it makes no sense to expose these.
Also, the timestamp is no longer needed as there is a single source for
these events.
https://bugzilla.gnome.org/show_bug.cgi?id=777342
The caribou daemon only gives us focus tracking, which is almost 1:1 with
our own FocusCaretTracker implementation. This means we can entirely
replace the Caribou daemon inside gnome-shell, reducing the Caribou
dependency to just libcaribou, and more specifically the
CaribouKeyboardModel we pull the keyboard models from.
As we still need underneath a CaribouDisplayAdapter to drive the keyboard,
reuse the wayland one, which has been renamed to make it look generic, plus
it will use the virtual input device API from mutter/clutter.
https://bugzilla.gnome.org/show_bug.cgi?id=777342
Some search providers such as GNOME Characters want to copy search
results to clipboard. However, on Wayland, clipboards are only
accessible from applications that have a visible surface on display.
This patch allows a search provider to request the shell to copy a
search result to clipboard when 'clipboardText' is included in the meta
of the result.
https://bugzilla.gnome.org/show_bug.cgi?id=775099
We are moving the icon to be added before the text instead of after,
which is consistent with other menu items in other popup menus, such
as the ones in the system indicator's popup menu.
https://bugzilla.gnome.org/show_bug.cgi?id=782166
This allows passing an optional icon parameter to addAction()
so that a PopupImageMenuItem instance is created instead of a
PopupMenuItem if an icon is specified.
https://bugzilla.gnome.org/show_bug.cgi?id=782166
Add an extra check to setIcon() so that either a GIcon or an string
with the icon's name is handlded, so that we can create menu items
in different ways (e.g. by passing a GIcon created from a resource).
https://bugzilla.gnome.org/show_bug.cgi?id=782166
Some extensions out there may fail to reload. When that happens,
we need to catch any exceptions so that we don't leave things in
a broken state that could lead to leaving extensions enabled in
the screen shield.
https://bugzilla.gnome.org/show_bug.cgi?id=781728
Since 5b3fb024be, the main window is only shown when not launched
with a valid UUID. As GtkDialog isn't meant to be used standalone,
we currently trigger a (harmless but annoying) warning in case
the main window isn't shown; we can avoid the warning by setting
up the preference dialog manually instead of using the GtkDialog
convenience class.
https://bugzilla.gnome.org/show_bug.cgi?id=781545
So far, the GWeatherInfo was given the enabled weather providers
as a parameter, at construction time. Because of the way in
which libgweather was designed, setting the providers right from
the beginning enabled libgweather to use them internally in order
to update its state. Updating the internal state is only relevant
when there is a valid location set, which is not guaranteed at the
time when the GWeatherInfo object is constructed.
In order to fix this, enable no providers at construction time and
only set valid providers after setting a valid location.
https://bugzilla.gnome.org/show_bug.cgi?id=780404
Recently Music gained a flatpak manifest inside the repo in bug 779905.
However that requires the desktop file to be properly named like
DBUS addresses are.
This patch renames the old Music desktop file to the new one.
https://bugzilla.gnome.org/show_bug.cgi?id=780157
Add a new D-Bus method for setting the monitor labels. This new method
takes connector names instead of output ids for associating with actual
monitors.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Since the workarea and margins are both in pysical pixels dimensions (we
fetch margins from Clutter, not from the theme), but the CSS expects
logical (scaled) pixels, unless we consider the scale factor when
setting max-height, it won't work on a HiDpi display.
This fixes missing scrollbars when the calendar popup is full on HiDpi
displays.
https://bugzilla.gnome.org/show_bug.cgi?id=753305
