The original condition the property was based on was added to make
the a11y switcher available in the login screen, though it did never
work properly - after popping up the switcher, additional tab key
presses were ignored. As we are now able to filter bindings much more
selectively, we can simplify the check and drop the sessionMode property.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
With the new flexible system in place, there's no point explicitly
hardcoding some built-in keybindings; just use the generic mechanism
for everything.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
Currently we hardcode the set of keybindings that are available in the
overview; add a generic mechanism to specify in which KeybindingModes
a keybinding should be available.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
For now we just use it to assign an identifier to modal modes in
which we want to allow some keybindings, but we don't use it for
any actual filtering; we'll start doing this shortly.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
We are currently using a hack to allow a select set of keybindings
in the overview. Implement the new MetaPlugin keybinding_filter
hook, which provides a cleaner way to achieve the same.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
Remove section titles for ethernet and mobile broadband, and replace
them with device status items that recognize if multiple devices are
installed in the same section, and if so automatically disambiguate.
https://bugzilla.gnome.org/show_bug.cgi?id=677142
Due to an oversight, the width of the password entry is currently
determined by the length of the message description. Fix the flags
so that the entry spans the entire width of the dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=684810
When updating the dash, we already avoid all animations while the
overview is hidden. However, as we are using Main.queueDeferredWork(),
updates may be deferred up to ~20 seconds while the overview is hidden.
If the overview is entered before a queued update has taken place, it
will be run immediately on map - as the overview is visible by then,
this means animating any outstanding changes.
Work around this by skipping animations during overview transitions as
well.
https://bugzilla.gnome.org/show_bug.cgi?id=686530
If the session mode has no locking support, screenshield had code to
unlock automatically, but it did so by checking the return value of
the constructor, instead of checking if the constructor was actually
callable, so it would get a TypeError before reaching the check.
https://bugzilla.gnome.org/show_bug.cgi?id=687708
At the moment, only the mouse can be used to focus and answer a chat
notification.
This adds a new keybinding (defaults to <Super>+n) to focus and expand
the active notification.
https://bugzilla.gnome.org/show_bug.cgi?id=652082
If I click on "Not listed?" in the login screen, I come to a username
field with two buttons: "Cancel" and "Sign In".
Clicking on "Sign In" doesn't actually sign me in though - it takes me
to the login entry. It would be better to rename "Sign In" to "Next" for
the username stage, therefore.
Gdm emit a signal to ask a question or a secret, but we can not know if
this is the last authentication question, hence we only use "Sign In"
for secret questions which improve the situation a lot.
https://bugzilla.gnome.org/show_bug.cgi?id=687656
When in the overview, if you move the mouse cursor over one of the
application launchers in the dash, all the unrelated windows are dimmed
both both in the window view and in the workspace view.
It helps to easily understand whether or not there are already opened
windows for this application, and where they are. It can also help in
differentiating the windows in the overview (sometimes the thumbnails
aren't precise enough to easily know which thumbnail belongs to which
application).
https://bugzilla.gnome.org/show_bug.cgi?id=657315
This has also the benefit of getting the application even if it can not
be retrieved through AppSystem, which can happen if the runtime WMClass
does not match the one of the desktop file.
This especially looked wrong with the following commits related to the
bug.
https://bugzilla.gnome.org/show_bug.cgi?id=657315
We simply hide the label when the popup is opened instead of relying
on the popup state when the hover state change.
To do this we replace the flag isMenuUp by a 'menu-state-changed' signal
on the AppWellIcon. This simplifies the dash label visibility handling
code that need additional changes for the bug.
https://bugzilla.gnome.org/show_bug.cgi?id=657315
Initializing this synchronously means that we will possibly wait for the
process to be auto-activated and answering to our call.
If the process is already running it also might not answer immediately
our request, as it might be doing sync I/O.
The right thing to do is to initialize the proxy asynchronously; there
are try/catch blocks in place for when the object is not available, or
not properly initialized.
https://bugzilla.gnome.org/show_bug.cgi?id=687491
This is called in the main thread, which we should never block for
synchronous I/O.
Since the operation we're wrapping is async already, just use
g_file_query_info_async() instead.
https://bugzilla.gnome.org/show_bug.cgi?id=687491
Remote search providers install an auxiliary keyfile to specify
static information, such as the object path/bus name needed to activate
the binary. Such keyfiles also specify the application the providers
pushes results for; currently, we support two formats for application
information
- two fields, "Title" and "Icon" that specify a (translatable) title and
an icon name for display
- one field "DesktopId" that specifies the desktop file name of the
application backing the provider, which obsoletes the previous
Title/Icon syntax
Since all providers in GNOME use DesktopId now, and we need to ensure a
remote search providers is always backed by an application for future
development, this commit drops the support for the older syntax.
https://bugzilla.gnome.org/show_bug.cgi?id=687491
Switch from a ClutterDragAction to a ClutterGestureAction, that gives
us the velocity of mouse motion at each step, and use it to compute the
animation time for completing the hide gesture.
https://bugzilla.gnome.org/show_bug.cgi?id=682537
The background is the same as the normal desktop, so we blur and
desaturate it to clearly show that it's not the normal system state.
To do so, we don't use standard ClutterEffects, to avoid the FBO
indirection. Instead, we take advantage of MetaBackgroundActor support
for GLSL code and paint the shaded background texture directly.
https://bugzilla.gnome.org/show_bug.cgi?id=682536
In some deployments showing a user list at the login
screen is undesirable.
GDM's fallback login screen has a configuration key:
org.gnome.login-screen disable-user-list false
that causes the user-list to get hidden.
This commit adds similar functionality to the normal,
shell-based login screen.
Based on a series of patches by Marius Rieder.
https://bugzilla.gnome.org/show_bug.cgi?id=660660
Right now when a user clicks "Not Listed?" they end up
seeing a session list that gets reset after they enter their
username.
This commit hides the session list until the username has
been entered.
https://bugzilla.gnome.org/show_bug.cgi?id=660660
For the "Not Listed?" case we will need to be able
to identify when the user has entered their username.
Once we have a way of tracking when the username is
entered, we can then defer showing the session list
too early, before the user can reliably pick a
session.
This username tracking will also be important for
implementing a disable-user-list configuration key.
If the config key gets toggled off at runtime, we'll
need to know if we're at a disruptive part of
the authentication process or not, so we know whether
we can can expose the user list right away, or wait
until the authentication conversation finishes.
Right now, we pass null in for an initial username,
and let the PAM machinery ask the user, which means we
have no good way of knowing when the username is entered.
This commit changes the "Not Listed?" code to ask the
user their username up front, before starting the PAM
conversation in much the same way we do if the user
picks a user from the user list.
https://bugzilla.gnome.org/show_bug.cgi?id=660660
After some changes, the tooltip label at the dash is not available
until it is visually shown. As this is not anymore a reliable
source of accessible name, we just set the accessible name
with the string used on that label.
https://bugzilla.gnome.org/show_bug.cgi?id=686583
shell_mobile_providers_parse() was returning the country information split
into a hash table with providers and a hash table with country names. This
patch merges both outputs into a single per-country object, so the parse()
method now returns a GHashTable with the following element-type:
(element-type utf8 ShellCountryMobileProvider>)
This also avoids more complex setups like returning lists inside of hash tables,
which was actually breaking either g-i or gtk-doc.
shell_mobile_providers_parse() was also modified to allow inputting the paths
of the country codes and provider list files to use. If paths are not given, the
default ones will be used. This helps us to provide test files during unit
tests.
Both the findProviderForMCCMNC() and findProviderForSid() methods are exported
out of the GSM and CDMA specific classes, and new unit tests for them are
implemented. Tests can be run manually with:
$> ./tests/run-test.sh tests/unit/mobileProviders.js
https://bugzilla.gnome.org/show_bug.cgi?id=687356.
If we lock before the user becomes active again, gnome-session will never
change presence from IDLE, and thus we'll never hide the lightbox.
Instead, install our own idle monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=687020
Entering the overview with the overlay key is done on key release but
exiting the overview on key press, which is inconsistent.
This change makes the overview hidden also on key release.
https://bugzilla.gnome.org/show_bug.cgi?id=683024
Adding a radial gradent to the dimming effect gives more depth to
the background.
Shading is computed in a GLSL fragment shader, and uses distance to
center of the screen to interpolate the darkening value to use.
Based on a patch by Pierre-Eric Pelloux-Prayer <pelloux@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=669798
The AnimatedIcon does not have an API for controlling the animation but
relies on the :visible property changes to start and stop a timeout used
to update the frame.
This has the inconvenient of having a side effect when visible is set to
true multiple times, and is not really the API expected from such
component.
Switch to a start/stop API instead. Also, update to the first frame at
startup while we are at it, since this is the expected behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=687583
You can't login until something has been entered in the password field.
We should therefore make the login button insensitive until you have
entered some text.
https://bugzilla.gnome.org/show_bug.cgi?id=687112
Notifications that are created in response to direct user actions like
"is ready" or "'foo' has been removed from favorites" should always be
displayed even though the user has marked him/herself busy.
https://bugzilla.gnome.org/show_bug.cgi?id=662900
The barrier was introduced to make the message tray hot corner
usable in multiple monitor setups. With the hot corner gone in
3.6, the pointer barrier doesn't make much sense anymore, so
remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=687457
