When the screen is marked as idle, we normally start a fading animation and
a timeout to finally lock the screen. This timeout is configured using the
fade time if no longer delay is set in settings.
However if animations are disabled or slowed-down/up, the fade time is
different from the STANDARD_FADE_TIME and so we might end up showing the
lock shield without actually locking for STANDARD_FADE_TIME in the disabled
or slowed-up animations case, or locking too early in case of slowed-down
animations.
So, just adjust the timeout time using the same logic of animations so that
this value is matching all the times.
Related to https://gitlab.gnome.org/GNOME/gnome-shell/issues/1744https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/749
We are currently inconsistent whether to put the operators in front
of the corresponding line or at the end of the preceding one. The
most dominant style for now is to put condition and first branch on
the same line, and then align the second branch:
let foo = condition ? fooValue
: notFooValue;
Unfortunately that's a style that eslint doesn't support, so to account
for it, our legacy configuration currently plainly ignores all indentation
in conditionals.
In order to drop that exception and not let messed up indentation slip
through, change all ternary operators to the non-legacy style.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/725
We currently use no less than three different ways of indenting
object literals:
let obj1 = {
foo: 42,
bar: 23,
};
let obj2 = { foo: 42,
bar: 23 };
let obj3 = { foo: 42,
bar: 23
};
The first is the one we want to use everywhere eventually, while the
second is the most commonly used "legacy" style.
It is the third one that is most problematic, as it throws off eslint
fairly badly: It violates both the rule to have consistent line breaks
in braces as well as the indentation style of both regular and legacy
configurations.
Fortunately the third style was mostly used for tween parameters, so
is quite rare after the Tweener purge. Get rid of the remaining ones
to cut down on pre-existing eslint errors.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/716
We now have everything in place to replace Tweener for all animatable
properties with implicit animations, which has the following benefits:
- they run entirely in C, while Tweener requires context switches
to JS each frame
- they are more reliable, as Tweener only detects when an animation
is overwritten with another Tween, while Clutter considers any
property change
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/22
For animating the arrows on the screenshield, we currently use a custom
transition function that tweens the opacity from 0 to maxOpacity in the
first half of the animation, and from maxOpacity back to 0 in the second
half.
This doesn't easily translate to Clutter's own animation framework, so
replace the custom transition with two consecutive tweens which do.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/22
The different units - seconds for Tweener and milliseconds for
timeouts - are not a big issue currently, as there is little
overlap. However this will change when we start using Clutter's
own animation framework (which uses milliseconds as well), in
particular where constants are shared between modules.
In order to prepare for the transition, define all animation times
as milliseconds and adjust them when passing them to Tweener.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/663
While we aren't using those destructured variables, they are still useful
to document the meaning of those elements. We don't want eslint to keep
warning about them though, so mark them accordingly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/627
meta_later_add() is modelled after g_idle_add() and friends, and
the handler's boolean return value determines whether it should
be scheduled again or removed. There are some places where we omit
the return value, add them (although the implicit return value of
"undefined" already gives us the intended result).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/637
Braces are optional for single-line arrow functions, but there's a
subtle difference:
Without braces, the expression is implicitly used as return value; with
braces, the function returns nothing unless there's an explicit return.
We currently reflect that in our style by only omitting braces when the
function is expected to have a return value, but that's not very obvious,
not an important differentiation to make, and not easy to express in an
automatic rule.
So just omit braces consistently as mandated by gjs' coding style.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
While we have some style inconsistencies - mostly regarding split lines,
i.e. aligning to the first arguments vs. a four-space indent - there are
a couple of places where the spacing is simply wrong. Fix those.
Spotted by eslint.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
In order to replace GTK+'s GtkDirectionType. It's bit-compatible with it,
too. All callers have been updated to use it.
This is a purely accessory change in terms of X11 Display usage cleanup,
but helps see better what is left.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/317
In order to replace GTK+'s GtkPolicyType. It's bit-compatible with it, too.
All callers have been updated to use it.
This is a purely accessory change in terms of X11 Display usage cleanup,
but helps see better what is left.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/317
Allow notifications to set a x-gnome-privacy-scope hint, with values in
['system', 'user']. If all the notifications in a particular source hint
that their privacy scope is ‘system’, don’t hide the notification
details on the lock screen.
This is aimed at fixing the particular case of power notifications: they
contain information which is not private to the user (it relates to the
system: battery state or AC state, which is obvious to anyone who can
see the machine), so hiding the details of a power management
notification when the screen is locked is pointless.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/issues/726
The last patch in the series, this one adapts StShadowHelper
to received a CoglFramebuffer. This is where we first touch
JavaScript with Cogl types, and as such, it depends on the
latest Mutter. Earlier versions of Mutter didn't have its
Mutter-Clutter GIR to generate types for various Cogl types.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/283
ES6 finally adds standard class syntax to the language, so we can
replace our custom Lang.Class framework with the new syntax. Any
classes that inherit from GObject will need special treatment,
so limit the port to regular javascript classes for now.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/361
Remove any usage of MetaScreen, as it has been removed from libmutter
in the API version 3. The corresponding functionality has been moved
into three different places: MetaDisplay, MetaX11Display (for X11
specific functionality) and MetaWorkspaceManager.
https://bugzilla.gnome.org/show_bug.cgi?id=759538
When not using arrow notation with anonymous functions, we use Lang.bind()
to bind `this` to named callbacks. However since ES5, this functionality
is already provided by Function.prototype.bind() - in fact, Lang.bind()
itself uses it when no extra arguments are specified. Just use the built-in
function directly where possible, and use arrow notation in the few places
where we pass additional arguments.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/23
We keep track of the lock state and restore it on startup to prevent
a crash from bypassing the screen lock. However on wayland, a crash
doesn't result in gnome-session restarting gnome-shell, but brings
down the entire session - that is, restoring the lock state does not
actually protect the existing session in that case, but forces the
user to authenticate twice in order to start the next session. This
is clearly not helpful, so avoid this by not saving the state when
running as wayland compositor.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/17
Any symbols (including class properties) that should be visible
outside the module it's defined in need to be defined as global.
For now gjs still allows the access for 'const', but get rid of
the warnings spill now by changing it.
https://bugzilla.gnome.org/show_bug.cgi?id=785084
When using the 'disable-lock-screen' setting to lock down the screen
lock, the expectation is that users cannot lock the screen. However
as it turns out, all the setting currently does is hiding the lock
button in the system menu and making the lock settings in the privacy
panel inactive. That means that if the 'lock-screen-enabled' setting
isn't disabled and locked down as well, we will just continue to
lock the screen on inactivity - not to mention the keyboard shortcut
that isn't subject to that setting anyway.
Instead of expecting administrators to hunt down every possible way
of locking the screen and disabling it individually, we can easily
handle all cases by refusing to lock the screen when disabled by the
lockdown settings.
https://bugzilla.gnome.org/show_bug.cgi?id=780212
The lightboxes used for screen blanking are created during initialization
and shown each time the screen should blank. During the (potentially long)
time where the lightbox is hidden, any actor could be raised above the
lightbox - in particular any popup menu raises itself to the top when
opened. To not exclude those elements from screen blanking, raise the
lightbox every time it is shown.
https://bugzilla.gnome.org/show_bug.cgi?id=773875
Since commit 67615a0cbc, any printable key can be used to lift the
screen shield rather than just escape/enter/space. While this is
convenient for unlocking where the input is forwarded to the password
entry, it is potentially dangerous when the screen is inactive but
not locked: If the user types her password, the first character will
lift the shield and the remaining input will go to the focused window.
To prevent this from happening, only allow printable keys when the
screen is actually locked and restrict the key presses that lift the
shield to the original set of escape/enter/space otherwise.
https://bugzilla.gnome.org/show_bug.cgi?id=773328
This isn't a performance critical actor and the NVIDIA driver discards
offscreen buffers in some cases which would require us to go through
extra hoops to handle here which isn't worth it.
https://bugzilla.gnome.org/show_bug.cgi?id=739178
Logind recently got support for a hint property in Session Object to
inform if session is Locked or not. It is up to desktop environments
to keep this property up to date.
https://bugzilla.gnome.org/show_bug.cgi?id=764773
If we aren't the active session clutter can't animate and thus we
can't expect the shield to be shown before releasing the suspend
inhibitor so we should release it immediately when becoming inactive.
https://bugzilla.gnome.org/show_bug.cgi?id=749228
The whole point of holding a suspend inhibitor is to be able to lock
before suspending.
Currently, when resuming we immediately take the inhibitor without
checking that we're locked which means that we won't be able to
release this inhibitor if we don't unlock at least once.
To prevent that and to better match the inhibitor's intention in the
first place, we can tie the inhibitor with not being locked. In
practice, we also want to let the locking animation finish before
suspending, so we'll tie the inhibitor with not being active
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=749228
This could happen if we are VT switched away and an animated
activation is requested because we're preparing to enter sleep. Since
we don't animate in this case we'd never reach
_completeLockScreenShown() before coming out of sleep, at which point
we _inhibitSuspend() again and would leak the previous inhibitor.
https://bugzilla.gnome.org/show_bug.cgi?id=749228
The screen should be woken up when a new notification is shown on
the lock screen, but not when a notification arrives while disabled.
Add a missing condition to fix.
https://bugzilla.gnome.org/show_bug.cgi?id=744114
Music is no longer a special type of notification according
to the design. If we want to resurrect the functionality, we
can reimplement it with a dedicated API like MPRIS rather
than piggy-bagging on the notification system.
https://bugzilla.gnome.org/show_bug.cgi?id=744815
We commonly mark strftime format strings for translation to account
for date/time representations without an existing strftime shortcut
("Yesterday %H%p"). As those translations are looked up according to
the locale defined by LC_MESSAGES, while the conversion characters
themselves are resolved according to LC_TIME, the result can be
rather odd when mixing locales ("Den 27. January"). The correct
solution would be to install translations for format strings in
the LC_TIME catalogue and look them up with dcgettext(), but we
don't have the infrastructure to do that easily. Work around this
by adding a helper method that looks up a string in LC_MESSAGES
using the locale defined by LC_TIME and use that to translate
format strings, which has the same result.
https://bugzilla.gnome.org/show_bug.cgi?id=738640
This commit ensures the login screen gets focused after
the screen shield is raised.
The code affects the unlock screen as well, but it's
less important since the unlock screen gets destroyed
and recreated each time the curtain moves, so it
has an opportunity to take focus on its own.
https://bugzilla.gnome.org/show_bug.cgi?id=708105
If you turn on natural scrolling, instead of swiping up, you need to
swipe down, which is bizarre. Just accept any type of scroll and have
them contribute to the delta.
https://bugzilla.gnome.org/show_bug.cgi?id=734874
We don't need to wait to until the stage window is mapped to take
the modal grab, because that code now runs in a startup-prepared
signal handler, which in turn runs some time after the mainloop
has started and well after the stage window is mapped.
https://bugzilla.gnome.org/show_bug.cgi?id=711682
At some point ScreenShield had code to do this, I don't know when
it was lost, but it makes sense and avoids having to move the mouse
just to see the shield.
https://bugzilla.gnome.org/show_bug.cgi?id=726378
If a user inserts the smartcard they logged in with into the system,
it's supposed to lift the shield and prompt for pin. That doesn't
happen because the parameter list of the smartcard-inserted signal
handler is wrong.
This commit fixes that.
https://bugzilla.gnome.org/show_bug.cgi?id=726262
Instead of poking through IDLETIME, which confuses the state tracking
and can prevent automatic suspend, send a special signal to GSD
when the screen is to be waken up for a notification.
Someday we'll bring over all the state tracking and avoid this
ping-pong between gnome-shell and gnome-settings-daemon, but
that day's not today.
https://bugzilla.gnome.org/show_bug.cgi?id=712706
Need to manually dispose of cairo contexts used in gjs with $dispose(),
or the context object will leak. These classes used cairo for drawing but
were missing the dispose call.
https://bugzilla.gnome.org/show_bug.cgi?id=722812
As far as I can tell, the only behavior change of a transient source
is that they auto-destroy after viewing their summary box pointer.
Since all transient sources are only associated with transient
notifications, it seems that we can never get to their summary box
pointer in the first place! Remove support for this.
https://bugzilla.gnome.org/show_bug.cgi?id=710115
oVirt is software for managing medium-to-large scale deployments of
virtual machine guests across multiple hosts. It supports a feature
where users can authenticate with a central server and get
transparently connected to a guest system and then automatically get logged
into that guest to an associated user session.
Guests using old versions of GDM support this single-sign-on capability
by means of a greeter plugin, using the old greeter's extension
API.
This commit adds similar support to the gnome-shell based login screen.
How it works:
* The OVirtCredentialsManager singleton listens for
'org.ovirt.vdsm.Credentials.UserAuthenticated'
D-Bus signal on the system bus from the
'org.ovirt.vdsm.Credentials'
bus name. The service that provides that bus name is called
the oVirt guest agent. It is also responsible for interacting
with the the central server to get user credentials.
* This UserAuthenticated signal passes, as a parameter, the a token
which needs to be passed through to the PAM service that is specifically
set up to integrate with the oVirt authentication architecture.
The singleton object keeps the token internally so it can be queried
later on.
* The OVirtCredentialsManager emits a signal 'user-authenticated' on
it's object once the dbus signal is triggered
* When the 'user-authenticated' signal is emitted, the login screen
tells GDM to start user verification using the PAM service. The
authentication stack of the service includes a PAM module
provided by oVirt that securely retrieves user credentials
from the oVirt guest agent. The PAM module then forwards those
credentials on to other modules in the stack so, e.g.,
the user's gnome keyring can be automatically unlocked.
* In case of the screen shield being visible, it also will react on that
'user-authenticated' signal and lift the shield.
In that case the login screen will check on construction time if
the signal has already been triggered, and a token is available.
If a token is available it will immediately trigger the functionality
as described above.
Signed-off-by: Vinzenz Feenstra <evilissimo@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=702162
Gdk uses Xwayland, so it only sees the events we forward to X11
clients. Instead, we can use the abstraction API provided by
mutter and get the right value automatically.
Also, we need to use MetaCursorTracker to handle the cursor
visibility too.
https://bugzilla.gnome.org/show_bug.cgi?id=707467
We slide the shield over it, so the animation is rarely seen, and
since no other actor is under the lock screen, the not-cleared stage
can show through, causing weird issues when trying to blend.
https://bugzilla.gnome.org/show_bug.cgi?id=706841
We show a lightbox when we suspend, to animate the fading to black
caused by turning off the monitors, but we need to hide it when
coming back, otherwise the user is just staring at a black screen
it until he moves the mouse or presses a key.
https://bugzilla.gnome.org/show_bug.cgi?id=706654
When locking manually (or locking with an animation), fade the
screen to black after a small timeout. This provides a smoother
experience, instead of abruptly turning off the screen.
https://bugzilla.gnome.org/show_bug.cgi?id=699112
This commit detects when a user inserts a smartcard,
and then initiates user verification using the gdm-smartcard
PAM service.
Likewise, if a user removes their smartcard, password verification
(or the user list depending on auth mode and configuration) are initiated
https://bugzilla.gnome.org/show_bug.cgi?id=683437
Make the lock dialog group reactive, to intercept any events
before they go to the actors below.
In the future, we may restructure our chrome to have a clear
layer system, but for now it fixes a security issue in the lock
screen (you can see the contents of the windows by dragging
if the screen was locked with the overview active)
https://bugzilla.gnome.org/show_bug.cgi?id=705840
Showing the new message at full size marks an abrubt change and looks
bad. Instead, gradually animate from 0px to full natural height.
Includes hacks to workaround flickering scrollbars while the animation
is in progress.
https://bugzilla.gnome.org/show_bug.cgi?id=687660
If that fails (which only ever happens in initial-setup mode, which
has no unlock or login dialog), we don't want to go ahead with
whatever we were doing.
https://bugzilla.gnome.org/show_bug.cgi?id=701848
If we don't remove the animation, we might leave a pending call
to _lockScreenShown() which would confuse our state tracking into
thinking we're active when we're not.
https://bugzilla.gnome.org/show_bug.cgi?id=700901
