When PackageKit signals that it prepared an update, offer an option
to reboot and apply it, using a helper that will setup the next
reboot and then calling to gnome-session.
https://bugzilla.gnome.org/show_bug.cgi?id=677394
This commit adds a grayscale effect to the magnifier, similar to
the lightness, brightness and contrast effects that are already there.
The effect is configured with the
org.gnome.desktop.a11y.magnifier.color-saturation setting, which
can take values from 0.0 (grayscale) to 1.0 (full color).
Based on a patch by Matthias Clasen <mclasen@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=676782
When connecting to virtual machines with usb-device redirection, such as Spice
enabled vms, automount may get in the way. Specifically if auto-usbredir is
enabled in the vm-viewer, then the usbredir code and the automount code race
for who gets to the device first.
If the automount code wins the race this is a problem, since usbredir causes a
device-disconnect (iow the usb mass storage driver sees an unplug), so in the
end usbredir always wins, and we end up with a non clean potentially corrupt
filesystem. Also see:
https://bugzilla.redhat.com/show_bug.cgi?id=812972
There for the need exists to be able to inhibit gnome-shell's automounting,
since all other inhibits run through gnome-session, I've chosen to do the same
for the automount-inhibiting. I've also submitted a patch to gnome-session to
reserve flag value 16 for this, see bug 678595.
This patch adds support to gnome-shell to honor this new inhibit flag.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=678597
The log messages about presence changes unnecessarily cluttered the
notification.
Instead, we now present the presence states (online, offline, away, busy)
with an icon placed right next to the avatar. We also no longer show
notifications on presence changes.
https://bugzilla.gnome.org/show_bug.cgi?id=669508
When selecting "Open Calendar" in the date menu, the configured
application is launched via command line, so we don't get any
startup notification. If Evolution is used as calendar application,
launch it via the .desktop file added by the last commit instead in
order to fix the issue.
https://bugzilla.gnome.org/show_bug.cgi?id=677907
By disconnecting the 'notify::connection-status' signal as soon as the account
is disabled, we were missing the signal telling us when the status was moving
from CONNECTING/CONNECTED to DISCONNECTED and so the status icon was never
updated.
What we really want is to disconnect the signal when the account is removed
from the account manager as we don't care about it any more.
https://bugzilla.gnome.org/show_bug.cgi?id=669112
Use our native JS error system in the "extension system" API, only
using the signal/log-based error reporting at the last mile. Additionally,
delete the directory if loading the extension failed, and report the error
back over DBus.
https://bugzilla.gnome.org/show_bug.cgi?id=679099
Instead of using the 'extension-state-changed' signal to relay errors,
use DBus's native error mechanism to inform the method caller that the
call has failed. This requires making the method actually asynchronous
so that we don't block the browser, which is stuck waiting for a reply
from the browser plugin. To ensure this, we need to modify the browser
plugin API to ensure its extesion installation method is asynchronous.
Additionally, this lets us remove the awful, broken hacks that we used
when a user clicked the "Cancel" button, replacing it by a DBus return
value.
https://bugzilla.gnome.org/show_bug.cgi?id=679099
When the extension downloader was originally designed, the information
downloading part was inserted at the last minute, along with the modal
dialog as a security feature to make sure an extension didn't silently
get installed on the user's machines either due to a security issue in
the browser-plugin, or an XSS issue on the extensions website. Correct
the mistake I made when writing the code; instead of dropping an error
on the floor, log it correctly. This "bug" has already bitten a number
of users who forgot to configure proxy settings in the control center.
https://bugzilla.gnome.org/show_bug.cgi?id=679099
Pam seems to give us different strings, sometimes 'Password:',
sometimes 'Password: '. Look for both of these when replacing
them with a translated prompt.
https://bugzilla.gnome.org/show_bug.cgi?id=675300
The current position below "System Settings" is problematic - the
items are unrelated, and misclicks will result in a scary system
modal dialog that has to be cancelled.
Move items around a bit to avoid this problem.
https://bugzilla.gnome.org/show_bug.cgi?id=678887
Right now the "move to workspace" keyboard shortcut transition isn't smooth. It
shows the window disappearing, hopping to the next workspace, and then sliding
into view. "Pin" the window to the stage while the animation is in progress,
then release it afterwards.
https://bugzilla.gnome.org/show_bug.cgi?id=660839
Install a custom handler for move-to-workspace-* keybindings that
shows the workspace switcher, which gives the user a sense of
direction when navigating with the keyboard.
https://bugzilla.gnome.org/show_bug.cgi?id=674104
Most of code implementing workspace switches was repeated with
minor differences on each direction. Instead, consolidate it
and use the new meta_workspace_get_neighbor.
https://bugzilla.gnome.org/show_bug.cgi?id=674104
When using dbus-glib, single return values were special-cased to
be returned verbatim rather than as array with a single element.
This is no longer true since switching to GDBus, so fix the places
where the change was overlooked.
https://bugzilla.gnome.org/show_bug.cgi?id=678852
We strongly expect applications to use the same values for the
'Title'/'Icon' fields in their search provider .ini file as the
'Name'/'Icon' fields in their .desktop file. Rather than requiring
applications to duplicate those fields, allow them to specify a
'DesktopId' field instead to point to the corresponding .desktop
file, which makes it possible to ship search provider files without
translatable strings (which is nice given that merging translations
into search provider files lacks a standard rule).
https://bugzilla.gnome.org/show_bug.cgi?id=678816
Currently we pass an icon name for the 'icon' parameter of the
RemoteSearchProvider constructor. In hindsight, using a GIcon
instead will give us a bit more flexibility, so change it.
https://bugzilla.gnome.org/show_bug.cgi?id=678816
Use the ShellMountOperation dialogs we have to implement a DBus API
allowing other processes to display them.
Since GtkMountOperation now tries to call into our DBus implementation,
every application that uses a GtkMountOperation will gain integration
with our shell dialogs (but will still handle the actual communication
with GVfs).
https://bugzilla.gnome.org/show_bug.cgi?id=678516
Wait until the completion of the mount operation before dismissing the
passphrase dialog, so in case it fails, we can re-use the same dialog
with an error message (like e.g. PolicyKit auth dialogs) instead of
showing a brand new one.
https://bugzilla.gnome.org/show_bug.cgi?id=674962
Wifi and mobile broadband have signal indicators and are thus
more useful than vpn icons in the panel. Therefore, in the case
we have both wifi/3g and VPN we prefer the former as the "primary
icon" and add a lock next to it.
Behavior when VPN is added to wired or other connections is still
preserved: the wired icon is replaced by vpn.
https://bugzilla.gnome.org/show_bug.cgi?id=672591
Sorting by strength is what the other OSes do by default, and it
provides a better UX (by offering your hotspot and router before
the one from your neighbor).
https://bugzilla.gnome.org/show_bug.cgi?id=658946
Only apply the allowAutorun flag for transient notifications, not for
mounts that end up in the resident notification well.
Also, stop looking at volume.can_automount() here, since we already
checked that previously in the mounter, and allowAutorun is enough.
https://bugzilla.gnome.org/show_bug.cgi?id=660595
Previously, a volume was being ignored from autorun if one of these two
conditions were met:
- its mount root file had a native scheme and was mounted in a
non-hidden location
- it had a volume that could have been automounted, and had a flag set
by the shell to allow autorun
In order to effectively ignore volumes that we don't mount ourselves
from our notification system, we have to meet both conditions at the
same time instead.
https://bugzilla.gnome.org/show_bug.cgi?id=660595
This is a fallout from some changes in MessageTray.Source, which now
requires either defining the iconName/iconType properties on it, or
implementing createNotificationIcon, and we're not doing any of those.
Fix it by storing the gicon of the source object and using a helper
method to create the icon actor on demand, to avoid any case when the
same actor might be added twice to different containers.
https://bugzilla.gnome.org/show_bug.cgi?id=678428
The dependency chain spirals out from folks->zeitgeist->xapian...and
I'm really not interested in pulling in all of that into the core
shell.
There is work on splitting out contact search into gnome-contacts; I'd
add a bug link but Bugzilla is down.
When the shell takes control of the screen (for example to show
a modal dialog or to lock the screen), it must reestablish itself
on top of the stack, and in particular restore any unredirected
window so that it is composited below the Shell UI.
Reviewed-By: drago01 in IRC.
There is a race if a channel is invalidated during its preparation: the
'invalidated' signal is already emitted so the Shell will never notice.
We fix this by simply checking if the channel is already invalidated when
receiving it from telepathy-glib.
In the approving case, we reject the full ChannelDispatchOperation as we only
support approving one channel at the time.
https://bugzilla.gnome.org/show_bug.cgi?id=677457
Initially, extensions were loaded after they shell had fully created
the session and all objects, but this didn't allow extensions easy
ways to monkey patch prototypes, as most functions had already been
bound. Remove the historical vestigal function, and just merge the
two together.
https://bugzilla.gnome.org/show_bug.cgi?id=677586
A large amount of extensions have something like this in them:
function init() {}
Since we have encouraged extension authors to try and not make any
changes in init, it feels weird and strange to have to create an
initialization function that does nothing. From now on, don't require
it.
https://bugzilla.gnome.org/show_bug.cgi?id=677586
This allows us to move to a file-monitor based approach in the future.
Since we need signals, we convert the current set of functions to an
object we attach signals too, leading to the new ExtensionFinder object.
https://bugzilla.gnome.org/show_bug.cgi?id=677586
This is seldomly used, and isn't checked in SweetTooth. Just remove
this inconsistency here rather than adding infrastructure to manage
and check it elsewhere.
https://bugzilla.gnome.org/show_bug.cgi?id=677586
We explicitly include NoDisplay applications in the ShellAppSystem because
we want app tracking for them, but we explicitly filter NoDisplay applications
out when showing them to the user because we don't want to show them to the
user. We also based our "All" apps view on a flattened list of apps. While
we did check for NoDisplay on the app item itself, we didn't check against
its parents. Refactor the app display view to not use a separate flat list
of applications, but instead a concatenation of all the applications in all
the loaded categories.
https://bugzilla.gnome.org/show_bug.cgi?id=658176
clutter_actor_get_children requires making a temporary GSList from
a linked list structure, and then creating a JS Array from that GSList.
For simple cases like the number of children, use clutter_actor_get_n_children.
https://bugzilla.gnome.org/show_bug.cgi?id=677426
Show the dialog on the monitor containing the pointer, rather than
the monitor with active focused window. This brings it inline with
the behaviour seen when launching applications.
Remove the focusMonitor/focusIndex from LayoutManager. These
properties were only used by the modal dialogs. Remove them since
they are not being used elsewhere.
https://bugzilla.gnome.org/show_bug.cgi?id=642591
Don't show non urgent notifications when the primary monitor
is in fullscreen (user watching a movie, having a presentation,
playing a game ...).
Once the user leaves fullscreen show the messagetray so that the user don't
miss any notification (same as in "back from idle").
https://bugzilla.gnome.org/show_bug.cgi?id=677590
Do not overflow currentItems array. If the Menu section is filled
via model items-changed callback the position in the model passed to
the RemoteMenu _modelChanged can be a to be added asynchronously
action-added. Thus the item does not yet exists in the currentItems.
https://bugzilla.gnome.org/show_bug.cgi?id=676447
_startTimer adds a tweener to implement the description countdown, which
updates the entire content on each iteration, including the icon. This
causes a significant impact on performance, especially when accessibility
is enabled, as it causes a flood of AtkObject:state-change:showing events.
As the countdown only affects the description, factor out _updateDescription
and use it in _startTimer, and only do a full update of all contents when
necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=674210
When displaying children, we need to make sure that we use the rowLimit
property that we pass to iconGrid, rather than assuming that it's
always MAX_SEARCH_RESULTS_ROWS in case some subclass (in an extension maybe)
wants to do something different.
https://bugzilla.gnome.org/show_bug.cgi?id=675527
Depending on the number of accounts, the type or simply the network,
there may be a noticable lag between setting the status and the actual
status change.
Use the new user-status-pending icon to indicate progress.
https://bugzilla.gnome.org/show_bug.cgi?id=659067
Refactor NMDeviceVPN to be more like the other NMDevices, including
having a valid getSectionTitle() and emitting signals when the
underlying connection changes state.
Use the existing notification infrastructure to hook these signals
to actual notifications (including some code consolidation).
https://bugzilla.gnome.org/show_bug.cgi?id=676330
Currently we only connect to the 'notify::n-workspaces' signal the
first time the overview is shown, which means we will miss any
changes to the workspace layout in the meanwhile.
In particular, the decision of whether the workspace switcher should be
shown is taken before the dynamic workspace handling takes over, and is
thus based entirely on the value of the num-workspaces user preference
rather than the actual number of workspaces.
Just connect the signal in _init() (with the nice side-effect to make it
explicit that the signal handler won't ever be disconnected).
https://bugzilla.gnome.org/show_bug.cgi?id=673198
role/label_actor should be used for the actor that will receive
the focus. In some cases it was also (wrongly) set on the
container, so using an AT like Orca, it exposed both.
https://bugzilla.gnome.org/show_bug.cgi?id=672242
It's used right away to discard some Empathy notifications.
This regression has been introduced during the 3.4 cycle when 'hints' has been
turned to a GVariant.
https://bugzilla.gnome.org/show_bug.cgi?id=675370
Ensure that the UI is updated when a connection changes name or id,
even if it was already known by a device.
Also, use less private properties on NMConnection objects, as they
can become stale and cause problems.
https://bugzilla.gnome.org/show_bug.cgi?id=677097
We now drop all status icons that are not explicitly enabled, which
breaks the ibus icon. Add it to the list of allowed icons until we
merge it with the keyboard one.
https://bugzilla.gnome.org/show_bug.cgi?id=677058
Some extensions may have complex layouts with multiple subdirectories.
Currently, getCurrentExtension doesn't support this, as it uses a regex
and assume's that the last path's component's parent is all that's needed.
Fix this.
https://bugzilla.gnome.org/show_bug.cgi?id=677001
These methods were initially introduced when I was planning on having
an explicit DisableExtension/EnableExtension, instead of hooking up
a gsettings notify. This behavior was changed at the last minute, but
the methods were kept to avoid having to change the browser-plugin.
Consumers of this API should just set the GSettings key directly
instead now.
https://bugzilla.gnome.org/show_bug.cgi?id=676837
In Shell.SessionType.USER mode, two separate setup functions were
used during startup. With the new feature-based checks, the second
one is now almost empty, so move its remaining code into the first
function and remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=676156
Add a sessionMode.allowKeybindingsWhenModal property, which determines
whether keybindings should still be handled while a modal dialog is
up or not.
https://bugzilla.gnome.org/show_bug.cgi?id=676156
Instead of falling back to a set of default values or crashing the
window manager when an invalid mode is specified, check the value
of the ShellGlobal:session-mode property before taking over as WM
and make a clean exit if it cannot be resolved to an existent mode.
https://bugzilla.gnome.org/show_bug.cgi?id=676156
Rather than accessing global.session_type / global.session_mode
all over the place, delegate mode information to a dedicated
sessionMode object. While not very useful for now, we will replace
checks for a particular mode with checks for particular properties
that sessionMode defines based on global.session_mode.
https://bugzilla.gnome.org/show_bug.cgi?id=676156
Since commit 518282e169, we hide both "Switch User" and "Log out"
on single-user systems. However, if there is more than one session
available, users may still want to get back to the login manager
to change sessions.
Add both "Log out" and "Switch Session" items in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=675802
Bluetooth PINs are required to have 6 digits, so enforce that
condition by making the PIN request notification's confirm
button insensitive unless the entered PIN has the correct length.
https://bugzilla.gnome.org/show_bug.cgi?id=651251
The availability of a notification action may depend on conditions,
so add a method to control the sensitivity of buttons which have
been added with addButton().
https://bugzilla.gnome.org/show_bug.cgi?id=651251
When the appMenu is not available, for instance when no windows are
open (on the current workspace), we make its actor unreactive to
"hide" it from keynav. However the menu can still be triggered
erroneously when using the corresponding keyboard shortcut, so
add a check for the actor's reactivity there as well.
https://bugzilla.gnome.org/show_bug.cgi?id=676316
For most subclasses, this is a direct swap -- a lot of the time, the
constructor was a blank class that override createNotificationIcon,
and called _setSummaryIcon in _init.
https://bugzilla.gnome.org/show_bug.cgi?id=661236
Rather than ask most users of Source to subclass it to simply set their icon,
just allow them to create a new instance and add it without any complex magic.
https://bugzilla.gnome.org/show_bug.cgi?id=661236
Technically those are minor changes, but people will love us anyway:
- change the default of the <alt>ernative to "Power Off"
- remove "Online Accounts" item
- regroup the remaining items
- remove ellipses from labels
https://bugzilla.gnome.org/show_bug.cgi?id=675802
Now that all searches are async we can remove the code path for the
SearchSystem::search-completed signal which is no longer useful.
This patch ends up fixing the status text not being updated for when
there are no results.
https://bugzilla.gnome.org/show_bug.cgi?id=675328
As shown in the previous commits, synchronous search is easily implemented
by the asynchronous search API. The only reason we still have a
synchronous search API is of historical reasons. Well, we're not a museum,
and git log can keep our fossils safe if need be....
https://bugzilla.gnome.org/show_bug.cgi?id=675328
To allow this to happen, we need to make sure that we don't overwrite the
previousResults when calling the async method. Note that this is a bug of
some sort, we were already using this synchronous style when a remote
search failed.
https://bugzilla.gnome.org/show_bug.cgi?id=675328
On the code two labels are created. One is used on the date menu
itself, and the other for the menu icon at the top panel. The wrong
label was used as the label_actor for the top panel menu icon.
https://bugzilla.gnome.org/show_bug.cgi?id=675307
Pausing means that we will continue to use the same output file when
the keybinding is activated again. While useful to record a single
video in chunks, it doesn't seem to be how most users understand the
keybinding. Closing the recorder will close the file and create a new
one the next time the keybinding is pressed.
https://bugzilla.gnome.org/show_bug.cgi?id=675128
Two nested scroll views were fighing with each other. The reason isn't
particularly important and has to do with some silliness involving
StAdjustment. The visible effect was that scrolling up and down when
in a summary item view would appear to be glitchy, and sometimes not
work at all.
To fix, make sure that the scroll view we don't care about is disabled
when in a summary mode.
https://bugzilla.gnome.org/show_bug.cgi?id=661615
There have been multiple notifications ever since we had a notification stack
per source, so the idea of one notification being on screen at a time has long
been dead.
https://bugzilla.gnome.org/show_bug.cgi?id=661615
We seem to have a lot of code that does something along the lines of:
if (condition)
actor.show();
else
actor.hide();
ClutterActor already has such a thing for exactly this purpose: the 'visible'
property. Use it instead of the mess above.
https://bugzilla.gnome.org/show_bug.cgi?id=672272
We hide the content around displaying new search results to prevent
flickering, unfortunately, one side effect of hiding an actor is
losing key focus if it currently is on the that actor or any
child. This could happen in the case of async results showing up after
the user had moved focus to the search results.
This patch works around that issue by saving the key focus and
resetting it back after displaying the new async results.
https://bugzilla.gnome.org/show_bug.cgi?id=675078
We already have one too many logging systems. Remove the errors tab
and make global.log/global.logError point to window.log/window.logError
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=675104
The keybinding to toggle the screen recorder was implemented as a
signal on MetaScreen, as keybindings could only be defined in mutter
core. As this is no longer the case, we can move the binding into the
shell where it belongs.
https://bugzilla.gnome.org/show_bug.cgi?id=674377
When receiving another message or responding in a new expanded chat
notification that has no prior chat history, the notification moved down
below the edge of the screen instead of expanding up, making part of it
invisible. Avoid this by making sure the notification's position is updated.
https://bugzilla.gnome.org/show_bug.cgi?id=661944
A BindConstraint on the size of uiGroup forces full redraws of the scene.
Instead, implement and use get_preferred_width and get_preferred_height.
https://bugzilla.gnome.org/show_bug.cgi?id=670636
Commit 26580f8f reintroduced an optimization on style changes to avoid
creating icons unconditionally. As this breaks icon theme changes (for
instance when toggling "High Contrast" in the universal access menu),
remove it again.
https://bugzilla.gnome.org/show_bug.cgi?id=672941
gnome-shell-extension-prefs uses format(), but can't pull in Shell
(which is a dependency for the module), since that in turn would pull in
Meta. Fix this by moving the introspected int format function to ShellJS
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=673106
nm_active_connection_get_devices() has a (questionable) special case
for the no devices case (which happens if the DBus object is
destroyed because NM went down): it returns null instead of an empty
array. Handle that instead of crashing.
https://bugzilla.gnome.org/show_bug.cgi?id=673043
With the application menu now being more than a stub, it has
become a much more interesting target, so add a keyboard shortcut
to open it directly.
This should also ease some of the pain for focus-follows-mouse users.
https://bugzilla.gnome.org/show_bug.cgi?id=672909
StBoxLayout currently does not handle height-for-width children
correctly under some circumstances. As a work-around, hard-code
a label height of two lines of text, which should work for most
locales in the one place the widget is currently used.
https://bugzilla.gnome.org/show_bug.cgi?id=672543
We currently require users to tab away from the search entry before
search results can be navigated using arrow keys. For convenience,
support using arrow keys directly from the entry.
https://bugzilla.gnome.org/show_bug.cgi?id=663901
To avoid messing up St.Buttons' internal state with a pointer grab,
we wait for the pointer to leave the actor before starting the
drag operation manually. This works generally fine, but makes starting
a drag operation harder than necessary. To fix, enforce a reasonable
button state when starting the drag, rather than special-casing buttons
before the drag.
https://bugzilla.gnome.org/show_bug.cgi?id=637103
Currently, click and drop events are handled by each WorkspaceThumbnail
instance. With the introduction of the workspace cut and the request
to extend the reactive area of the workspace selector to the edge
of the monitor, it becomes more convenient to do all the event handling
inside ThumbnailsBox, even if this requires some manual layout computation.
https://bugzilla.gnome.org/show_bug.cgi?id=643319
Two small fixes which made _showNewStyleDialog() err out:
- g_key_file_load_from_data() expects a string as first
argument, but g_buffered_input_stream_peek_buffer()
returns an array of "data"
- g_key_file_load_from_data() is documented to allow -1 as
length parameter for \0-terminated strings, but the actual
type of the parameter is unsigned (d'uh)
https://bugzilla.gnome.org/show_bug.cgi?id=671556
Tweener uses a clutter timeline to manage all active animations
running at a given moment. The timeline is mopped up when no
animations are going any more.
Clutter requires timelines to have a finite duration, but since
animations can happen at any moment, no fixed duration can
accomodate the shell's needs.
To combat this problem, the tweener code picks a relatively
long duration: 1000 seconds. No string of animations should take
that long, so, in theory, that should be good enough.
Unfortunately, this tactic fails, in practice, when the user
suspends their machine, or VT switches. An animation can take
much longer than 1000 seconds (~16 minutes) to complete in those
cases. When the user resumes, or VT switches back the timeline
completes immediately (since it's already late) and tweener
never notices that the timeline stops ticking.
This commit changes the tweener timeline to automatically loop
back to 0 after completing, so that despite its fixed duration
property, it effectively never stops. Since the timeline loops,
its concept of elapsed time no longer increases monotonically,
so we now ignore it and track time ourselves with
GLib.get_monotonic_time().
This partially reverts commit
35764fa09e.
https://bugzilla.gnome.org/show_bug.cgi?id=653833
Some objects have a resolve hooks that throw exceptions, so just
checking "'actor' in object" can fail. In that case we should catch
the exception and return the standard toString() value, or the
object cannot be inspected from the looking glass.
https://bugzilla.gnome.org/show_bug.cgi?id=671410
We currently only update the status chooser's sensitivity if accounts
are added, removed or enabled; unfortunately during account creation,
the account may become enabled before it is actually valid, so the
status chooser remains insensitive. Fix by listening to validity changes
as well.
https://bugzilla.gnome.org/show_bug.cgi?id=672265
Instead of duplicating the vendor prefix search in the endSessionDialog code,
just use lookup_heuristic_basename, which is used with real app tracking.
https://bugzilla.gnome.org/show_bug.cgi?id=672270
gnome-session moved away from using properties over DBus in 2008, which
means that the code in GNOME 3.0 never should have worked -- but it did,
which makes me suspect that it was a quirk of the GJS DBus implementation.
Switch over to the proper inhibitor API, which is based on methods. If
gnome-session eventually gets ported to GDBus, then we can switch back
to properties.
https://bugzilla.gnome.org/show_bug.cgi?id=672270
Bailing out of _sync() early if the application lost keyboard focus to
the shell can only be done on actual application focus changes. In
particular, doing this check on a switch to an empty workspace while
the keyboard focus is already on the shell prevents the AppMenuButton
from being hidden as it should.
https://bugzilla.gnome.org/show_bug.cgi?id=672011
Reactive means that the actor is reachable from keyboard
navigation. If the target isn't current that means we are not tweening
the actor to be visible so we shouldn't set it reactive either.
https://bugzilla.gnome.org/show_bug.cgi?id=671998
If the user has their mouse over the workspace thumbnails while
entering the overview, it's more likely that it's a coincidence
that their mouse pointer is in the area. Avoid expanding the
thumbnails box in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=651092
In the workspace-collecting code we add a check to avoid collecting a
workspace if any startup sequence is running there. Since the sequence
can take some time to load, an helper function is also added which keeps
the (empty) workspace around for a very short time, while waiting for the
sequence to start.
https://bugzilla.gnome.org/show_bug.cgi?id=664202
If the user was inactive while a notification was shown, we show the summary
when the user becomes active again. This ensures that we inform the user of
the existance of new notifications that the user might have missed.
When the user comes back from away, the summary is now only shown if it has
new notifications.
https://bugzilla.gnome.org/show_bug.cgi?id=643014
The onscreen keyboard should not follow the locale's text direction,
but order keys according to the selected keyboard layout. Effectively
this means enforcing LTR on the keyboard actor.
https://bugzilla.gnome.org/show_bug.cgi?id=672024
We are currently taking "old" placeholders that are still animating
out into account to calculate the new placeholder position - this
causes an annoying bug, where dragging a dash item downwards triggers
quick continous position changes of the placeholder.
Just ignoring old placeholders fixes the issue.
https://bugzilla.gnome.org/show_bug.cgi?id=651842
Some modifiers like NumLock or ScrollLock don't make sense in
keybindings, which is why we ignore them in mutter when matching
events to keybindings; for keybindings in the overview, we do
the matching ourselves, so filter the same modifiers as mutter.
https://bugzilla.gnome.org/show_bug.cgi?id=665215
The hide animation causes hover notifications for the actors inside the
boxpointer. PopupBaseMenuItems, in particular, grab the keyboard focus on
hover notifications to enable keyboard navigation on menus. This, in turn,
breaks modal dialogs' keyboard navigation since key focus is taken away from a
just created dialog when the menu is hiding.
Since input events aren't useful while menus are animating we just prevent
them from propagating.
https://bugzilla.gnome.org/show_bug.cgi?id=662493
Checking if _buttonLayout contains _initialKeyFocus always fails since we
destroy all children before. Instead, use a signal handler id when explicitly
setting the initial key focus which is zeroed if/when the actor is destroyed.
https://bugzilla.gnome.org/show_bug.cgi?id=663437
The dynamic-workspaces key was introduced to allow us to opt out of
writing the num-workspaces setting (which is ignored with the dynamic
workspace management anyway), but there'll be some expectations that
the setting will have an effect on the UI.
It's actually not very hard to support, so here's to the graybeards ...
https://bugzilla.gnome.org/show_bug.cgi?id=671568
With the recent keynav changes, the keyboard focus can now move
away from the search entry while a search is active. While we
keep the focus entry style while a search is active, we set the
cursor visibility depending on whether the entry has focus. This
doesn't seem very logical, so always request to show the cursor
when we appear focused.
Note that at least for now we are just expressing intent, as clutter
never draws the cursor for unfocused entries.
When canceling a search pressing Escape while the focus is on the
search entry we clear the entry, set its text to the hint and go back
to the previously selected tab. Make this the behavior also for when
the focus is on search results and not on the entry itself.
https://bugzilla.gnome.org/show_bug.cgi?id=663901
Running apps are always kept in the dash, so removing them from
favorites just moves them to the end of the favorites list. This
behavior is not immediately obvious, so only show the remove target
when dragging a favorites application that is not currently running.
https://bugzilla.gnome.org/show_bug.cgi?id=644853
Saving the status to GSettings is pointless if it did not actually
change. If done during login, it is actually harmful, as it causes
dconf-service to be started.
https://bugzilla.gnome.org/show_bug.cgi?id=668214
When restoring the previous sesssion presence, we forcefully set
gnome-session's status. In the case of IDLE, this will trigger the
screensaver, which is clearly unwanted first thing after login. We
should only save and restore statuses that are explicitly set by the
user anyway, so limit presence saving to AVAILABLE and BUSY statuses.
https://bugzilla.gnome.org/show_bug.cgi?id=665701
Previously, PanelMenuButton would only set max width if the user
explicitly clicked the menu button, resulting in submenus without scrollbars
if opened via keyboard navigation or mouse over.
https://bugzilla.gnome.org/show_bug.cgi?id=658946
loadExtension() fails if the extension object is already created,
but the installation dialog was creating a dummy object in the
downloading state. Since nothing requires that (and the object is
not in the correct format anyway), just kill it.
https://bugzilla.gnome.org/show_bug.cgi?id=671134
This hack was part of the custom scroll view code that allowed for
proper scrolling when the actor was near the screen edges. Since
the port to St.ScrollView, it's unnecessary and downright wrong,
causing portions of actors to be clipped. Remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=613194
If a widget isn't focusable or none of its children are focusable, then
navigate_focus will return false and the key focus won't be set. We
need to explicitly grab the key focus in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=671001
* Add a keyring prompter based on GcrSystemPrompter
* Adds dependency on gcr version 3.3.5 or higher
* Not yet using unmerged support for non-pageable memory
https://bugzilla.gnome.org/show_bug.cgi?id=652459
The preferred way to unmaximize/untile a window is by using a drag
gesture. Extend the available area to start this gesture into
non-reactive parts of the top bar above the window - with that we
take advantage of the "infinite height" of the screen edge, and the
extra space is particularly useful when the window has its titlebar
hidden.
https://bugzilla.gnome.org/show_bug.cgi?id=666359
We were supposed to be updating the notification's title when the
window title changes, but we didn't actually bother to re-format
the title and body, effectively leaving the notification unchanged.
For modal dialogs without buttons, the button group still contributes
padding/spacing. To fix that, hide it by default and only show it
when actually adding buttons.
https://bugzilla.gnome.org/show_bug.cgi?id=668209
The appSwitcher has been using a custom scrolling implementation because
St.ScrollView was buggy when it was written. The bugs have been fixed
so remove the custom implementation and move to St.ScrollView.
https://bugzilla.gnome.org/show_bug.cgi?id=613194
The old formula worked only when the primary monitor was positioned at the
top of the virtual desktop. When that was not the case, the available
space was miscalculated sometimes resulting in negative numbers, which in
the end produced strangely vertically stretched window thumbnails.
https://bugzilla.gnome.org/show_bug.cgi?id=651130
Although not all "Finding and reminding" applications are ready
yet, the integration with gnome-documents' search results overlaps
enough with the "Recent Items" provider to justify its removal.
https://bugzilla.gnome.org/show_bug.cgi?id=670150
Allow applications to register search providers by dropping a keyfile
into a well-known directory. For now, initialize all found providers;
long term, we probably want to give users the ability to restrict the
set of active search providers.
https://bugzilla.gnome.org/show_bug.cgi?id=663125
Add an asynchronous search provider for results from a DBus service
implementing the org.gnome.Shell.SearchProvider interface; this
will allow applications to hook into the Shell's search without
implementing it in Shell itself or requiring an extension.
https://bugzilla.gnome.org/show_bug.cgi?id=663125
We will allow applications to hook into shell's search by registering
a service which implements a well-known DBus interface.
"search-providers" is a reasonable directory name for applications to
drop their registration files, but it conflicts with "search_providers"
used by open search providers - rename the latter to avoid confusion.
https://bugzilla.gnome.org/show_bug.cgi?id=663125
Currently, asynchronous search providers are expected to call
startAsync() in getInitialResultSet()/getSubsearchResultSet(),
which will trigger async mode until the search is canceled or
updated. Switching between synchronous and asynchronous mode like
this makes asynchronous search an implementation detail, but being
transparent to the searchDisplay means that certain optimizations
don't work as expected. Namely, updating asynchronous search results
causes flickering, and the automatic selection never focuses
asynchronous results.
So change the API to require providers being either synchronous (with
the current getInitialResultSet()/getSubsearchResultSet() methods)
or asynchronous (with asynchronous variants), and handle asynchronous
providers explicitly in searchDisplay.
https://bugzilla.gnome.org/show_bug.cgi?id=663125
renderResults() updates the results set, determines the number of
results to display, retrieves the corresponding result metas and
adds a new results actor for each meta.
Splitting the function in those parts allows to move the retrieval
of the result metas into SearchResults, which is where we ensure
flicker-free rendering and control the selection - we want to keep
both features for asynchronous result metas which we are about to
introduce.
https://bugzilla.gnome.org/show_bug.cgi?id=663125
Empathy uses to support 2 D-Bus API for calls:
- StreamedMedia: legacy API
- Call.DRAFT: experimental version of the new API
Since 3.3.90, Empathy only supports Call1, the first stable version of the new
API, so the Shell should do the same.
https://bugzilla.gnome.org/show_bug.cgi?id=667694
Add a new dbus method that takes an area (x, y, width, height) and fires a
flashspot on it.
This would be useful for applications like totem and cheese.
https://bugzilla.gnome.org/show_bug.cgi?id=669660
An actor is removed from its parent after it emits the destroy signal,
so we can't just check if the notification stack has more than one
notification -- we need to check if there's a notification there
that is not the current one.
This was causing spew in the form of:
"this.notificationStack.get_children()[0]._delegate.setIconVisible
is not a function"
IconGrid items used to be square, so a single size value made
perfect sense. However, as contact search uses rectangular items,
using a single size is wrong - the allocated height ends up twice
the size of the visible height, which is particularly visible if
another provider displays results below contact results.
https://bugzilla.gnome.org/show_bug.cgi?id=670148
The correct way to make an actor having the same size as another is
a ClutterBindConstraint. Connecting to 'allocation-changed' fails because
the allocation might not change even when 'width' and 'height' properties do.
This is the case of Main.uiGroup, used as parent container for zoomed
window clones.
In lightbox.js we bind also the position because in principle it could change,
even if currently only fullscreen lightboxes are used.
VPN secrets are stored by the plugins, that provide separate
helpers for authentication. This commit adds the support for invoking
the binaries and pass them connection details.
For plugins that support it (as exposed by their keyfile), we invoke
them in "external-ui-mode" and expect a set of metadata about the
secrets which is used to build a shell styled dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=658484
Substitutions generated by configure don't resolve prefixes, so
cannot be used for paths. Config already had localedir, and next
commit will need libexecdir and sysconfdir, so just bite the bullet
and move to sed.
https://bugzilla.gnome.org/show_bug.cgi?id=658484
ConsoleKit is being obsoleted by systemd. Accordingly port the CK logic
in the gnome-shell automount manager to systemd-logind APIs.
This makes use of systemd-logind's native C APIs which are much easier
to use than the D-Bus APIs in this case, and much faster too (since they
are synchronous and directly query the kernel for the information we
need). The dependency is compile time optional, and in order to be nice
to the Debian folks g-s compiled with this enabled fill automatically
fall back to CK support on systems lacking systemd.
ConsoleKit is obsoleted by systemd-logind. Accordingly, port
the current CK code to systemd. In order to be nice to
the Debian people fall back to CK if systemd is not found,
so that the code makes the best of whatever it runs on.
Gsm.GetRegistrationInfo and Cdma.GetServingSystem return a single argument
consisting of a tuple, not three separate arguments. This is
a regression from the GDBus port.
https://bugzilla.gnome.org/show_bug.cgi?id=670005
Currently they return 'undefined' instead of something meaningful,
e.g. DND.DragMotionResult.CONTINUE. This was unnoticed because none
of the ancestors of the Activities button actors do any drag handling.
The only visible issue are JS errors generated when dragging, for example,
a window thumbnail over the button, because the cursor cannot be set.
https://bugzilla.gnome.org/show_bug.cgi?id=669921
Since the dummy actor occupies exactly the same area of the Hot Corner,
it can be erroneously picked during xdnd operations. Fix this by
hiding it from pick.
https://bugzilla.gnome.org/show_bug.cgi?id=669831
If both spacing and -shell-grid-item-size are 0, as they would be with nothing
setting them, we enter an infinite loop where we try to compute the layout.
Avoid the situation entirely by defaulting -shell-grid-item-size to a sane
value instead of 0.
https://bugzilla.gnome.org/show_bug.cgi?id=662747
The "extension" object is what I previously called the "helper" object.
It contains the extension importer object as well as the metadata object.
Things that were previously added on to the metadata (state, path, dir, etc.)
are now part of this new "extension" object.
With the new importer changes brought on by the extension prefs tool,
extensions are left without a way to import submodules at the global scope,
which would make them rely on techniques like:
var MySubModule;
function init(meta) {
MySubModule = meta.importer.mySubModule;
}
That is, there's now a lot more meaningless boilerplate that nobody wants
to write and nobody wants to reivew.
Let's solve this with a few clever hacks.
Allow extensions to get their current extension object with:
let extension = imports.misc.extensionUtils.getCurrentExtension();
As such, extensions can now get their own extension object before the
'init' method is called, so they can import submodules or do other things
at the module scope:
const MySubModule = extension.imports.mySubModule;
const dataPath = GLib.build_filenamev([extension.path, 'awesome-data.json']);
https://bugzilla.gnome.org/show_bug.cgi?id=668429
Add two new APIs, "launchExtensionPrefs" to let SweetTooth let the user
launch the extension preferences tool directly from the browser. To allow
SweetTooth to check if an extension can be configured, add a new key to
the 'metadata', 'hasPrefs', which is returned by the GetExtensionInfo/
ListExtensions DBus methods.
https://bugzilla.gnome.org/show_bug.cgi?id=668429
A new tool, 'gnome-shell-extension-prefs' can load a new entry point from
extensions, 'prefs.js', which has an entry point to return a GTK+ widget.
This allows extensions to have their own preferences dialog, without each
extension needing to ship its own Python script and .desktop file.
https://bugzilla.gnome.org/show_bug.cgi?id=668429
ExtensionUtils is a new module that has a lot of miscellaneous things related
to loading extensions and the extension system put into a place that does not
depend on Shell or St.
Note that this will break extensions that have with multiple files by replacing
the old uuid-based importer with an object directly on the meta object.
https://bugzilla.gnome.org/show_bug.cgi?id=668429
If an extension fails to import, we will pass the error object
to logExtensionError, which fails to pass it onto DBus as an
error object is not a string. To fix, convert the error object
to a string before passing it to logExtensionError.
https://bugzilla.gnome.org/show_bug.cgi?id=668429
When the session status changes to IDLE, we automatically adjust
the IM presence; however, we should treat HIDDEN the same as OFFLINE
and not change the presence.
https://bugzilla.gnome.org/show_bug.cgi?id=642408
Since the port to GDBus, sessionActive is only set on DBus name
owner changes; this means that it may end up not being initialized
at all, and therefore always evaluate to false.
Make sure that the property is always initialized on startup.
https://bugzilla.gnome.org/show_bug.cgi?id=668020
gnome-settings-daemon commit 07b1ed63016 removed the custom 'Changed'
DBus signal in favor of the standard 'PropertiesChanged' signal, so
use that instead to update the icon.
https://bugzilla.gnome.org/show_bug.cgi?id=667371
When the last window on a workspace is closed the focus goes to some other
window in another workspace which would cause us to show the AppMenuButton for
an application that isn't visible on the current empty workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=643867
Currently it is not possible to trigger the context menu while the
summary notification is opened (and vice versa). To actually trigger
the desired item, the user has to click again, which is annoying
without a good justification, so allow switching directly between
left/right click items.
https://bugzilla.gnome.org/show_bug.cgi?id=666197
Currently we display IM status information for every contact, falling
back to "offline" if the contact does not have an associated IM
account. Instead, don't show IM presence in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=662685
this.parent was ported from calling the parent class's method like
MessageTray.Notification.prototype._init.call(this, ...);. When
porting to Lang.Class, the 'this' parameter is now passed automatically, but
removing it was forgot in a few places. Fix these places.
https://bugzilla.gnome.org/show_bug.cgi?id=665017
We consider spacing and padding in _adjustIconSize, but as we use
the theme node from an actor which is not exposed to the CSS, we
miss the "real" values - correct this.
https://bugzilla.gnome.org/show_bug.cgi?id=662213
Clear the ClutterClickAction state before starting the drag,
otherwise it will eat the first button event after the drag,
preventing a new drag from being started.
https://bugzilla.gnome.org/show_bug.cgi?id=662386
Writting the screenshot to a file can take a relativly long time
in which we block the compositor, so do that part in a separate
thread to avoid the hang.
https://bugzilla.gnome.org/show_bug.cgi?id=652952
DashItem labels have initial delay before showing up, but once the
first label in the dash is visible (meaning the user is very likely
exploring things) and the pointer is moved along the dash, the label
will follow immediately.
https://bugzilla.gnome.org/show_bug.cgi?id=666170
Signed-off-by: Seif Lotfy <seif.lotfy@collabora.co.uk>
- We should only call workspaceRemoved() for workspaces that are
are actually being removed.
- When we have multiple monitors, a window on a secondary monitor is
on all workspaces, so it ends up in all workspaces _allWindows
lists, so we can't use previous presence in that list to determine
whether we need to go ahead and add the actor; allWindows is simply
the list of windows where we are listening to notify::minimized.
https://bugzilla.gnome.org/show_bug.cgi?id=667652
Since the application proxy is created asynchronously, at the time
the GActionGroup (GActionMuxer) is created, there is no GDBusMenu yet.
Defer creating the menu in that case.
Also, clear out signal handlers if have no target application.
https://bugzilla.gnome.org/show_bug.cgi?id=633028
We add a drag monitor to check whether the pointer is inside
the workspace selector, and update the visibility of the drop
placeholder consequently.
https://bugzilla.gnome.org/show_bug.cgi?id=664201
According to the GIO docs, sections can have labels too. We support
them by inserting a non reactive menu item at the beginning of the
section. This item is specially flagged to be ignored while processing
changed signals from the model (since it does not correspond to any
model item)
https://bugzilla.gnome.org/show_bug.cgi?id=666681
If there's a single small window (e.g. empathy chat) in the overview, it
looks usable, because it's as big as outside of the overview, but when
you start to type, overview search is launched, which is confusing.
Fix that by setting maximum scale for window clones to 0.7
https://bugzilla.gnome.org/show_bug.cgi?id=646704
In overview when closing a window and afterwards dragging a window it can
happen that you pick a wrong window or no window if windows' positions is
updated while initiating the drag.
Fix that by delaying window rearrangement when cursor is over a window.
https://bugzilla.gnome.org/show_bug.cgi?id=645325
DND code assumes it can query the size of the actor before parenting,
while StWidget asserts that get_preferred_size() is only called
after the actor is on stage. This fixes a crash while dragging
"Connect to..."
https://bugzilla.gnome.org/show_bug.cgi?id=633028
With GJS' GDBus implementation, we get the invocation paramters as an
array if we declare a method as async.
This is bad and not consistent with what GJS does for synchronous
methods, but it's the way it is, and other classes in gnome-shell
implement this correctly by exploding the array into its components in
the method implementation, but not the screenshot methods.
Also, we're supposed to return a value using the provided invocation
object, not with a callback now, so do that.
https://bugzilla.gnome.org/show_bug.cgi?id=667662
Commit 25948f214e replaced the old hardcoded scaling behavior of
background-images with the CSS-compliant option to control that
behavior with the background-size property. Fix some fallout from
the changed default scaling behavior.
That way different system notifications, such as the ones about battery power
and the ones about software updates, are shown with separate message tray
sources.
https://bugzilla.gnome.org/show_bug.cgi?id=664138
After an item is destroyed, all its signals were disconnected,
except for 'destroy' itself. This could lead to exceptions, if
destroy was called more than once on the item.
https://bugzilla.gnome.org/show_bug.cgi?id=665680
Instead of using an St.Tooltip to show the app's name under the icon,
manually position a new St.Label ourselves. Make sure to keep the label
hidden when right-clicking so it doesn't get in the way of the popup menu.
Only one tooltip/label will be displayed at a time.
https://bugzilla.gnome.org/show_bug.cgi?id=666166
GTK+ also exports window-specific actions, by putting the object path
for the exported action group in the _DBUS_OBJECT_PATH X property.
We add this action group to the app's muxer with a 'win' prefix,
since that is what the exported menu expects. Whenever the focus
window changes, we update the window-specific actions of its
application, and emit notify::action-group to cause the app
menu to be updated.
GDBusActionGroup api has changed again, adapt to that.
Also, use a GActionMuxer to add the 'app.' prefix to actions,
instead of manually stripping it out of the action names.
In the future, the muxer will also contain per-window actions
with a 'win.' prefix.
By the time the window is first mapped and the app menu button is
synced, we may not have finished reading the menu. In that case,
connect to notify::menu and update accordingly.
Use the new GApplication support in ShellApp to create the application
menu. Supports plain (no state), boolean and double actions.
Includes a test application (as no other application uses GApplication
for actions)
https://bugzilla.gnome.org/show_bug.cgi?id=621203
The loop can exit with an interval of length one or one of
length zero. In the first case it is correct to check which side
of the interval to return, in the second case no comparison should
be made (since there is only one possible value).
In practice, this usually results in one comparison more than needed,
but in some cases (when the position was past the end of the array),
would call the comparator with undefined.
https://bugzilla.gnome.org/show_bug.cgi?id=666614
When transitioning from gnome-panel to gnome-shell in 3.0 we
lost the ability to summon the wisdom of the mythical fish.
This patch restores this, for the few adepts that are aware of
the magical incantation.
(Not as configurable as the original one, but it's an easter egg
after all...)
https://bugzilla.gnome.org/show_bug.cgi?id=666606
Forcing the icon size will distort it unnecessarily, and will
in any case not work if showing an animation (which is a ClutterGroup).
Instead, set the size on the bin, and make it align its child
if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=666606
Previously the code in _accessPointAdded was iterating over the
the network list to find a good place, and at that time, added both
the network to the list and the item to the menu. When I refactored
to call queueCreateSection, I forgot to add code to insert the
network in the list.
Add it now, using the new Util.insertSorted function.
https://bugzilla.gnome.org/show_bug.cgi?id=666429
Adds two new functions, Util.lowerBound and Util.insertSorted,
that take an array, a value and a comparator, and find the
first position at which the value can be inserted without
violating the order, in optimal time.
https://bugzilla.gnome.org/show_bug.cgi?id=666429
By using Main.queueDeferredWork, we can ensure that most of the
menu contents (in particular, the heaviest parts like the list of
wifi networks) are not updated immediately as we receive signals
from NetworkManager. Instead, the menu is rebuilt some time later,
or as soon as the user opens the menu.
This means that it is no longer needed to optimize for the
access-point-added case, replacing a lot of buggy code with a safer
call to _queueCreateSection, which in turn should ensure that the
more menu, if existing, is always at the end and that at most 5 networks
are visible outside it.
https://bugzilla.gnome.org/show_bug.cgi?id=664124
We need to notify when the channel dispatcher calls HandleChannels on
us with a channel we already handle. However, we don't want to notify
if we claim a new incoming channel which doesn't actually have
anything interesting in it yet.
For example, a new channel pops up just to give a delivery
notification. We want (or, need) to handle it but don't want to notify
for it.
Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=666243
Signed-off-by: Jonny Lamb <jonnylamb@gnome.org>
The window overlays may be shown erroneously if hideOverlays is
called while the corresponding clone has an uncompleted tween which
calls showOverlays in its onComplete handler, for instance when
quickly leaving the overview before the initial overview animation
has finished. To fix, remove all existing tweens when hiding the
overlays.
https://bugzilla.gnome.org/show_bug.cgi?id=666020
When in overview, window labels flicker or are temporarily hidden on a
number of occasions - when simply clicking around the area the windows
are displayed in, dragging a window, sliding in the workspace list,
adding new workspaces etc. This patch makes the label for any window
visible at any given moment when in overview and the said window is
not being dragged around.
https://bugzilla.gnome.org/show_bug.cgi?id=644861
When wifi or wwan are blocked by hardware killswitch, we should not
allow changing the switch (it won't work anyway), and show
"hardware disabled" instead, similar to what we already do in the
bluetooth menu.
https://bugzilla.gnome.org/show_bug.cgi?id=665194
When placing networks in _createSection, we were taking in
consideration that _activeNetwork is always first, by adding 1,
but then kept this offset also for networks following it (normally,
all of them, since _activeNetwork is also the most recently used),
that instead should not be affected by the movement.
This resulted in the menu showing 4 networks + More... instead of
5.
https://bugzilla.gnome.org/show_bug.cgi?id=664124
The three boxes for the ripple animation are visible when created. This
means that the drag and drop code that searches for an actor to handle
the drag can find the ripple boxes instead of the Activities button or
hot corner. The latter can handle drag and drop while the ripple boxes
can't.
This is only a problem if drag and drop is attempted before the ripple
animation has been played: the boxes are made invisible at the end of
the animation. The fix is to just create the boxes invisible.
Instead of leaving the tray covering the whole last pixel row when it's
hidden, hide it completely. This avoids mouse events not being delivered to
application windows on the last pixel row.
To summon the tray we use a single reactive pixel on the corner.
https://bugzilla.gnome.org/show_bug.cgi?id=663366
The dash handles 'window-drag-cancelled', to be able to do the
animations for drag snap-back and size changes in parallel. As
the signal is not emitted for previews in the workspace switcher,
it does not work in that case.
If workspaces-only-on-primary is false, swipe scrolling is now
broken with multiple monitors. To fix, let workspacesDisplay
handle swipe scrolling for all views.
https://bugzilla.gnome.org/show_bug.cgi?id=652580
If workspaces-only-on-primary is false, workspaces should be shown
on each monitor; rather than letting the existing workspaces span
the entire screen, manage one workspacesView per monitor (similar
to the extra workspaces in WorkspacesView when the setting is true).
https://bugzilla.gnome.org/show_bug.cgi?id=652580
Extra workspaces are special, in that they collect windows from
all workspaces for a particular monitor. This matches the default
behavior, but we need more than a single workspace per monitor if
workspaces-only-on-primary is false, so don't create the extra
workspaces in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=652580
WorkspacesDisplay was introduced to manage the workspace objects
and views; however, the overview still accesses the view held
by the workspacesDisplay directly, which is a bit odd.
Add some additional methods needed by the overview, and make the
view a private property.
https://bugzilla.gnome.org/show_bug.cgi?id=652580
When installing an extension at runtime, we accidentally swapped the 'type'
and 'enabled' parameters. While this doesn't directly affect anything right
now, as everything works coincidentally, future patches that look at the
'type' parameter to decide what to do would get the wrong answer.
The last patch in the sequence. Every place that was previously
setting prototype has been ported to Lang.Class, to make code more
concise and allow for better toString().
https://bugzilla.gnome.org/show_bug.cgi?id=664436
All classes that have at least one other derived class (and thus
benefit from the framework) have been now ported. These includes
NMDevice, SearchProvider, AltTab.SwitcherList, and some other
stuff around.
https://bugzilla.gnome.org/show_bug.cgi?id=664436
Third step in the class framework port, now it's the turn of
MessageTray.Source and MessageTray.Notification, as well as
the various implementations around the shell.
https://bugzilla.gnome.org/show_bug.cgi?id=664436
The Lang module in gjs has recently gained a small yet powerful
Class framework, that should help improve the readability of code
when using complex inheritance.
This commit starts porting shell code, by rewriting all classes in
popupMenu.js (and all derived classes) to Lang.Class.
https://bugzilla.gnome.org/show_bug.cgi?id=664436
No idea why connecting a key-press-event to a non-reactive actor
used to work, but some Clutter update broke it. Obvious fix is
to make the actor reactive.
https://bugzilla.gnome.org/show_bug.cgi?id=664582
We prefer to ask the user for his own password. If PolicyKit
is not configured to accept that, try the root password. If
PolicyKit does not accept that either, ask for password of
the first user that PolicyKit _will_ accept. The last case
is a bit broken, but should rarely occur in real-life
configurations.
https://bugzilla.gnome.org/show_bug.cgi?id=651547
If no telepathy accounts have been set up or enabled, the IM status
chooser won't have any effect. To avoid confusing behavior, make
the status selector insensitive in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=662800
ComboBoxMenuItems use ClutterClones to reconstruct the active item
in the associated ComboMenu, so pseudo class changes due to state
changes of the ComboBoxMenuItem don't have the intended effect
(since the actual style information is taken from the associated
ComboBoxMenu item).
As a fix, propagate relevant pseudo class changes to the active
ComboBoxMenu item.
https://bugzilla.gnome.org/show_bug.cgi?id=662799
ComboBoxMenuItems use ClutterClones to reconstruct the active item
in the associated ComboMenu to not impose a particular MenuItem type
in the menu. However, this results in style changes (for instance
those triggered by icon-theme or text-scaling-factor changes) of
the ComboBoxMenuItem not having a visual effect until the ComboBoxMenu
is shown.
As a fix, force a style update on the ComboBoxMenu when the item's
style changes.
https://bugzilla.gnome.org/show_bug.cgi?id=662799
The option was merge with 'visual-bell-type' with the GSettings
port, but the change turned out too disruptive for the universal
access menu / settings panel, so gsettings-desktop-schemas commit
a5819b2a4e9 re-added the separate option.
- replace some left-over references to GnomeSession.Presence.setStatus()
- the correct replacement for GnomeSession.Presence.getStatus()
is *not* GnomeSession.Presence.connectSignal('StatusChanged')
This continues the series of patches for GDBus porting, affecting
all code that accesses remote DBus objects. This includes modemManager,
automount, autorun (for the hotplug sniffer), calendar, network (for
nm-applet only), power, scripting (for perf monitor interface)
https://bugzilla.gnome.org/show_bug.cgi?id=648651
Port org.gnome.ScreenSaver and org.gnome.SessionManager glue code
to use GDBus, and move /org/gnome/Shell/EndSessionDialog to the
GDBus connection, so it is backed by the org.gnome.Shell name.
https://bugzilla.gnome.org/show_bug.cgi?id=648651
Rewrite code acquiring dbus names so that it uses GDBus, and rewrite
ShellDBus so that it is exposed on the GDBus connection. Ports of
the other objects will follow.
https://bugzilla.gnome.org/show_bug.cgi?id=648651
When changing _findNetwork with _findExistingNetwork, I changed
the return value to avoid searching twice for the access point,
and changed some names. I forgot to update all points where those
names were used.
https://bugzilla.gnome.org/show_bug.cgi?id=663278
Previously, we connected to notify::strength only if there was
already a signal connected, and the AP changed (thus, by induction,
we never connected). As a result, the icon became stale and different
from that shown inside the menu (which is correctly updated).
https://bugzilla.gnome.org/show_bug.cgi?id=650007
We must look for the actor under the pointer in the whole message tray and not
just in the notification. This will avoid us to capture focus when a
notification comes up with the pointer on the whole tray area.
https://bugzilla.gnome.org/show_bug.cgi?id=661358
Add "Mute"/"Unmute" option to the right click menu for chats to allow muting conversations
without blocking the sender or disabling all non-urgent notifications. Muting a conversation
prevents the pop up of notifications on new messages from the muted source, while these
messages are still available from the summary notification in the message tray.
https://bugzilla.gnome.org/show_bug.cgi?id=659962
SubMenuMenuItems close automatically with their parent, however
closing fails when the parent item is a MenuSection, as those
currently ignore any open()/close() requests.
At some minimal handling by emitting the 'open-state-changed' signal,
so children like SubMenuMenuItems work as expected.
https://bugzilla.gnome.org/show_bug.cgi?id=661029
PopupMenu.firstMenuItem returns a PopupMenuItem, not an apObj. We
need to retrive the latter using the _apObj property.
Also, somehow the property from the number of elements in a menu
was changed from .length to .numMenuItems, and this broke the
destruction of the menu upon emptying it.
https://bugzilla.gnome.org/show_bug.cgi?id=659277
Calling nm_access_point_get_ssid() in the handler of the
access-point-removed signal can result in DBus request, which will
then fail because the object was already removed at the server side.
Instead, use a difference function to retrieve the access point
object (the network), that compares directly by object identity.
https://bugzilla.gnome.org/show_bug.cgi?id=651378
Allow push_modal to optionally only work with a keyboard only grab and
use that in altTab as a fallback to allow switching windows while a pointer grab
is in effect (like during DND operations).
https://bugzilla.gnome.org/show_bug.cgi?id=660457
When two extensions monkey-patch the same area, enable() and disable() may
behave badly and completely wreck things. To solve this, when disabling
an extension, "rebase" the extension list so that monkey patches should be
added and removed in order.
https://bugzilla.gnome.org/show_bug.cgi?id=661815
Rather than loading and enabling all extensions at Shell init time, save some
time and gain some basic security by not loading extensions if they're
not enabled.
https://bugzilla.gnome.org/show_bug.cgi?id=661815
The GFileMonitor on ~/.gtk-bookmarks was block-scoped in the
PlacesManager._init() function, which caused it to be destroyed as soon
as the constructor was done. This caused changes in bookmarks to never
be notified to possible watchers (such as the places-menu extension).
To fix this, the 'monitor' variable has been promoted to an object
instance member.
https://bugzilla.gnome.org/show_bug.cgi?id=661921
When requesting a presence change, the actual presence set by
mission control does not necessarily match the requested presence
(if an active account does not support the requested presence),
which may result in the wrong presence being restored.
As a fix, be more cautious about saving status by assuming that
users do not request presence changes between an automatic presence
change request and the actual change.
https://bugzilla.gnome.org/show_bug.cgi?id=661485
Historically, when applications set "image-data" they expect it to show up
as an icon. So we display it as such if an icon is not specified with an
"app_icon" argument to Notify(). We also use "image-path" for an icon if
an icon is not specified.
We only display a large image specified with "image-data" or "image-path"
if an icon is also specified.
https://bugzilla.gnome.org/show_bug.cgi?id=659158
Users don't expect the bullets they just typed into an entry
field to disappear as soon as they hit enter.
Instead, they want the dialog to become insensitive during the
authentication process, so that it's clear that what they typed
in is being processed.
https://bugzilla.gnome.org/show_bug.cgi?id=657894
The message tray focus grabbing code sets the stage input
mode to Shell.StageInputMode.FOCUSED when the overview is
not visible. This ensures the stage window's input
region gets reshaped to include the notification chrome,
and so that input events get delivered appropriately to
the notification that grabbed focus.
The message tray code never tries to restore the stage input
mode later. Instead, the code relies on the stage input
mode (and input region) getting reset to
shell.StageInputMode.NORMAL automatically when focus moves
back from the shell chrome to a window in the user's session.
It's not really correct to set the stage input mode based
on the overview's visibility, though. At the login screen,
even though no overview is visible, the stage input mode is
Shell.StageInputMode.FULLSCREEN which is sufficient
for the notification's needs, Furthermore,
Shell.StageInputMode.FOCUSED is insufficient for the login
dialog's needs since the login dialog isn't considered
part of the shell's chrome and won't get included in the
stage input region.
This commit changes the message tray code to only set the
stage input mode if the current stage input mode isn't good enough,
rather than assuming the input mode isn't good enough just because
the overview is hidden.
https://bugzilla.gnome.org/show_bug.cgi?id=660919
Because we were sorting the Alt+Tab list by user_time rather than
stacking order / MRU, it was possible for the currently-focused window
to sometimes not be the first app in the list. Fix this by using
meta_display_get_tab_list() to get the proper MRU ordering of windows
on the current workspace, and then convert that to an ordered list of
apps.
https://bugzilla.gnome.org/show_bug.cgi?id=645026
