Commit Graph

328 Commits

Author SHA1 Message Date
Giovanni Campagna
013b6aa44a network: don't fail if we can't read a connection associated with an active
It can happen in legitimate cases, such as a version incompatibility
between NetworkManager and libnm-glib or a restricted permission.

https://bugzilla.gnome.org/show_bug.cgi?id=701849
2013-06-14 20:38:54 +02:00
Jasper St. Pierre
0e7d3a7558 network: Remove support for virtual networking
This isn't in the new design, and no good can come from this.
Just allow people to use the control center to configure virtual
networking.

https://bugzilla.gnome.org/show_bug.cgi?id=701954
2013-06-14 14:15:17 -04:00
Jasper St. Pierre
8bd4895538 network: Simplify connections to the firmware signal
The status item will go away soon, so make sure the one-time
fire is given its own function. At the same time, only connect
to the signal when the situation actually matters.

https://bugzilla.gnome.org/show_bug.cgi?id=701954
2013-06-14 14:15:17 -04:00
Jasper St. Pierre
465c77ddcf network: Make the device field private
With getIndicatorIcon() replacing the main use of the .device
field, we can make this a private API.

https://bugzilla.gnome.org/show_bug.cgi?id=701954
2013-06-14 14:15:17 -04:00
Jasper St. Pierre
6ef2d4a4cc network: Merge NMConnectionBased back into NMDevice
https://bugzilla.gnome.org/show_bug.cgi?id=701954
2013-06-14 14:15:17 -04:00
Jasper St. Pierre
7ae7f046c2 network: Rewrite VPN section to be independent of NMConnectionBased
https://bugzilla.gnome.org/show_bug.cgi?id=701954
2013-06-14 14:15:17 -04:00
Jasper St. Pierre
f4051e810e network: Remove overflow of VPN configurations
It's unlikely that somebody has more than five VPN connections
configured, and the code is

https://bugzilla.gnome.org/show_bug.cgi?id=701954
2013-06-14 14:15:16 -04:00
Jasper St. Pierre
e6c239d0f3 network: Move indicator icon selection to individual devices
This cuts down on the number of cross-connected "public" API between
the devices, hopefully allowing us to reduce it further.

https://bugzilla.gnome.org/show_bug.cgi?id=701954
2013-06-14 14:15:16 -04:00
Jasper St. Pierre
35a7a3c1ac network: Always show the VPN indicator when connected to VPN
The new designs ask for this.

https://bugzilla.gnome.org/show_bug.cgi?id=701954
2013-06-14 14:15:11 -04:00
Jasper St. Pierre
a0991c8261 network: "Remove" support for dial-up modems
NetworkManager has never supported dial-up modems, which are the
only case we have a modem device without any of these capabilities.

https://bugzilla.gnome.org/show_bug.cgi?id=701954
2013-06-14 13:48:35 -04:00
Jasper St. Pierre
9520880568 network: Remove dead code
No class in here has this.carrier as a property. Presumably, this was
meant to be this.device.carrier, but since this code is going to be
rewritten soon anyway, might as well just junk the never-working
code for now.

https://bugzilla.gnome.org/show_bug.cgi?id=701954
2013-06-14 13:48:35 -04:00
Emilio Pozuelo Monfort
dd74ea99a7 bluetooth: Port to BlueZ 5
In BlueZ 4, Authorize() was used to authorize both service
and JustWorks authorization requests. In BlueZ 5 these two
have been split into AuthorizeService() for services and
RequestAuthorization for JustWorks devices. Adapt the
Bluetooth code accordingly.

https://bugzilla.gnome.org/show_bug.cgi?id=700891
2013-06-14 11:36:10 +02:00
Jasper St. Pierre
c6fe6eb7ab network: Fix a bad signal name
We try to disconnect from firmwareChangedId, not firmwareMissingId.

https://bugzilla.gnome.org/show_bug.cgi?id=701954
2013-06-12 16:58:34 -04:00
Jasper St. Pierre
2cbee05c8a network: Remove setActiveConnection/clearActiveConnection
This can be more easily achieved by listening for changes to the
device's active-connection property. VPN will still need support to
track active connections, as it does not have an associated
device. But as VPN can track multiple active connections, the names
"set" and "clear" don't quite fit. Rename them to the more-standard
"add" and "remove".

https://bugzilla.gnome.org/show_bug.cgi?id=701954
2013-06-12 16:57:56 -04:00
Jasper St. Pierre
4cd832c05a network: Rename a variable for consistency
We tend to use the name "a" in this method. This matches consistency
with the rest of the code.

https://bugzilla.gnome.org/show_bug.cgi?id=701954
2013-06-12 16:11:37 -04:00
Jasper St. Pierre
9c222c7e5c network: Remove _createAPItem
The code flows better if this is inlined like this.

https://bugzilla.gnome.org/show_bug.cgi?id=698918
2013-06-06 17:16:44 -04:00
Jasper St. Pierre
2249da7976 network: Remove some more dead code
Submenus gone means we can remove the title param and things
that use it.

https://bugzilla.gnome.org/show_bug.cgi?id=698918
2013-06-06 17:16:44 -04:00
Jasper St. Pierre
a55288bda0 network: Don't create submenus for multiple-connection items
As multiple-connections for a Wi-Fi AP won't fit in the new design,
remove submenus right now. Simply make a simple item that connects
to the first known connection for the AP, which should be the common
case.

https://bugzilla.gnome.org/show_bug.cgi?id=698918
2013-06-06 17:16:07 -04:00
Jasper St. Pierre
aee7cd73c4 network: Reformat connection code
This makes the code flow the same between removeConnection and checkConnection.

https://bugzilla.gnome.org/show_bug.cgi?id=701755
2013-06-06 15:32:06 -04:00
Jasper St. Pierre
380a71dd21 network: Remove a dead signal
This signal is unused.

https://bugzilla.gnome.org/show_bug.cgi?id=701755
2013-06-06 14:00:38 -04:00
Jasper St. Pierre
23dd5cc160 volume: Remove some unused variables
https://bugzilla.gnome.org/show_bug.cgi?id=701755
2013-06-06 14:00:38 -04:00
Rui Matos
26f8441f73 status/keyboard: Stop destroying the IBusBus object
This is a singleton object inside libibus which means that if we
destroy it (e.g. because ibus-daemon got restarted) then, other
library users, like the ibus gtk+ IM module that we also use
in-process, will break.

https://bugzilla.gnome.org/show_bug.cgi?id=699189
2013-05-27 14:07:56 +02:00
Rui Matos
1579aad362 status/keyboard: Allow switching input source in the message tray
We still can't show a popup switcher in the message tray but we can at
least degrade gracefully and advance to the next input source.

https://bugzilla.gnome.org/show_bug.cgi?id=697009
2013-05-27 14:05:53 +02:00
Rui Matos
a2a580954a status/keyboard: Switch input source on special modifiers accelerator
This simply mimics the X server's layout switching behavior by
advancing to the next input source and wrapping around.

https://bugzilla.gnome.org/show_bug.cgi?id=697008
2013-05-27 14:05:51 +02:00
Rui Matos
944c28f3b3 status/keyboard: Synchronize input source switching with key events
Currently we simply set the gsettings key when activating an input
source. This obviously introduces a time window, between the event that
activates the switch and when the switch is complete, under which key
events are being delivered to applications and interpreted according
to the previous input source.

The patches in bug 696996 introduce a DBus API in g-s-d that allows us
to know when an input source if effectively active. Using that and
freezing keyboard events in the X server until we hear back from g-s-d
we can ensure that events won't be misinterpreted after an input
source switch.

https://bugzilla.gnome.org/show_bug.cgi?id=697007
2013-05-27 14:05:50 +02:00
Gustavo Padovan
9ba78ce04a Bluetooth: Use "Passkey" instead of "PIN"
Passkey is the proper name to be used when we are pairing with a Bluetooth
2.1+ device. PIN are only used for older devices which is not the case
here, the message is only shown when dealing with 2.1+ devices.

https://bugzilla.gnome.org/show_bug.cgi?id=697661
2013-05-24 16:42:04 +02:00
Florian Müllner
34aa501637 network: Fix stupid typo
There is no ACTIVE state in NetworkManager.ActionConnectionState,
it's ACTIVATED.

https://bugzilla.gnome.org/show_bug.cgi?id=700394
2013-05-15 17:47:36 +02:00
Jasper St. Pierre
6330379f77 network: Use accessPointAdded to add initial access points
This is technically a smidge slower due to the constant bisect insert,
but since this should only happen when we make a Wi-Fi dialog, it's
insignificant.

https://bugzilla.gnome.org/show_bug.cgi?id=700322
2013-05-15 11:13:11 -04:00
Jasper St. Pierre
30c64baa7f network: Don't pass this._connections to the VPN section
It's always empty by this point.

https://bugzilla.gnome.org/show_bug.cgi?id=700322
2013-05-15 11:13:11 -04:00
Jasper St. Pierre
cdbed0c615 network: Use checkConnection to set up the initial connections
https://bugzilla.gnome.org/show_bug.cgi?id=700322
2013-05-15 11:13:11 -04:00
Jasper St. Pierre
f6e7034172 network: Remove an unused getter
https://bugzilla.gnome.org/show_bug.cgi?id=700322
2013-05-15 11:13:11 -04:00
Jasper St. Pierre
cd9c5b9c5d network: Remove semi-complex primary device finding
According to dcbw (and some updated documentation), there will
always be a 1:1 correspondence between NMActiveConnection and
an NMDevice.

https://bugzilla.gnome.org/show_bug.cgi?id=700322
2013-05-15 11:13:11 -04:00
Florian Müllner
28abc15c00 volume: Adjust to icon name changes
The headphone icon gained an audio- prefix, use that instead of
the old name.
2013-05-14 14:29:22 +02:00
Giovanni Campagna
7514607129 network: don't use active connections that are in invalid states
Only ACTIVE or ACTIVATING connections are important when deciding
what icon to show, don't fallback on any, possibly invalid or deactivating,
active connection object.

https://bugzilla.gnome.org/show_bug.cgi?id=676285
2013-05-08 23:58:53 +02:00
Jasper St. Pierre
7a8b392607 network: Remove some genericism in the wireless code
This was presumably originally used in multiple places, but it's
not anymore, so un-generify the code here.

https://bugzilla.gnome.org/show_bug.cgi?id=698918
2013-04-26 12:24:03 -04:00
Jasper St. Pierre
bfdf069d2d network: Rename "apObj" to "network"
We put these "access point objects" in "this._networks" and
"this._activeNetwork", so let's rename it. This also makes
the fact that each "access point object" can contain multiple
access points a tiny bit less confusing.

https://bugzilla.gnome.org/show_bug.cgi?id=698918
2013-04-26 12:18:39 -04:00
Jasper St. Pierre
b4b00a48d9 network: Remove explicit autoconnection code
NM is now a lot smarter about dealing with automatic connections, so just
create an empty connection and pass it to it. The only places where NM
requires connection settings is where we require explicit setup: Bluetooth
DUN, WPA-Enterprise and WWAN/VPN. These cases are already handled by
gnome-control-center, where complex configuration is handled, so remove
the automatic connection management for now and just let NM handle it.

https://bugzilla.gnome.org/show_bug.cgi?id=698918
2013-04-26 12:16:06 -04:00
Jasper St. Pierre
e5f226612e network: Use activeApChanged to get the initial active network
https://bugzilla.gnome.org/show_bug.cgi?id=698918
2013-04-26 12:16:06 -04:00
Jasper St. Pierre
20619ad3c1 network: Fix some splice mishaps
Calling splice() without a second argument removes all of the elements
after the provided index, not just one.

https://bugzilla.gnome.org/show_bug.cgi?id=698918
2013-04-26 12:16:06 -04:00
Jasper St. Pierre
37dce7d4c3 network: Deduplicate some similar code
https://bugzilla.gnome.org/show_bug.cgi?id=698918
2013-04-26 12:16:06 -04:00
Jasper St. Pierre
a67b82e730 network: Remove some dead code
We cannot possibly reach createActiveConnectionItem unless we have
an active network, so the plain unreative menu item cannot ever
be created.

https://bugzilla.gnome.org/show_bug.cgi?id=698918
2013-04-26 12:16:05 -04:00
Jasper St. Pierre
e0b8ad7911 network: Remove UNKNOWN security type
It's unused.

https://bugzilla.gnome.org/show_bug.cgi?id=698918
2013-04-26 12:16:05 -04:00
Jasper St. Pierre
dbb39d366e network: Properly disconnect from the state-changed signal
The destroy signal never gets emitted, so we need to properly
disconnect manually when we destroy the wrapper.

https://bugzilla.gnome.org/show_bug.cgi?id=698918
2013-04-26 12:16:05 -04:00
Jasper St. Pierre
e1de36398d network: Remove some unused helpers
https://bugzilla.gnome.org/show_bug.cgi?id=698918
2013-04-26 12:16:05 -04:00
Jasper St. Pierre
871c28aeeb network: Require NMGtk
Enough time has passed that we can safely depend on NMGtk in the new
network implementation.

https://bugzilla.gnome.org/show_bug.cgi?id=698918
2013-04-26 12:16:05 -04:00
Giovanni Campagna
aef70152de Keyboard: clear currentSource after destruction
StLabel doesn't like that we set its properties after destructions,
and this would happen in currentInputSourceChanged() at the end,
when setting the ornament.
2013-04-24 21:47:03 +02:00
Jasper St. Pierre
4a2f54f6ff popupMenu: Define the dot next to the menu as an "ornament"
We want to remove switches in remote menus, so make way for
a checkmark ornament for the popup menu item.

https://bugzilla.gnome.org/show_bug.cgi?id=698427
2013-04-23 15:35:55 -04:00
Matthias Clasen
6c4be0311a Revert "Make it possible to always show the a11y status"
This reverts commit 6ce79c62eb.
2013-04-15 18:39:44 -04:00
Matthias Clasen
6ce79c62eb Make it possible to always show the a11y status
A switch for this is part of the redesign for the universal
access control-center panel.

https://bugzilla.gnome.org/show_bug.cgi?id=698001
2013-04-15 17:48:47 -04:00
Rui Matos
01deb9ef7d status/keyboard: Check if this._currentSource is valid on activation
this._currentSource might be invalid so check for that to prevent an
exception and still switch to the newly activated source.

https://bugzilla.gnome.org/show_bug.cgi?id=695841
2013-03-14 14:56:28 +01:00