All WPA APs were getting set as WPA2 due to the check for privacy;
WPA/WPA2 APs *must* set the Privacy bit according to the standard,
so we'd never end up in the case for NMAccessPointSecurity.WPA.
Fix that, and also add flags for WPA[2] Enterprise which we'll
use a bit later for the first-time connect case for 802.1x enabled
access points.
Instead of rolling our own code, use new libnm-glib functions to do
the same thing. Requires libnm-glib as of
779215c742bbe29a2c66202ec7e2e6d43edeb8ff (which will be part of 0.9).
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=648648
A "cosmetic" code arrangement I requested in code review resulted
in one too few items being removed from the queue for each incremental
chunk of icons added. Fix.
https://bugzilla.gnome.org/show_bug.cgi?id=648739
We used used to indicate to the user the ability to move to another workspace
during dnd by highligthing the adjacent workspaces on hover.
This was done by changing the workspace's opacity to 200 and set it to
255 for the highlighted adjacent ones.
This is now no longer needed as the design was completely changed since
then (overview relayout; we no longer represent workspaces in the way
we did before) and introduces a bug where we don't properly reset the
opacity after the drag action, so just remove that code.
https://bugzilla.gnome.org/show_bug.cgi?id=648983
If a user is fast and mouses over a window while the workspace thumbnail
animations are playing, it can be frustrating when the close button won't
appear at the end of the animation.
https://bugzilla.gnome.org/show_bug.cgi?id=645848
The initial selection of the Alt+Tab dialog was happening before the
dialog was shown and allocated, and so the "do we need to scroll"
check used bogus coordinates. Fix by showing the dialog (and forcing
an allocation) first.
https://bugzilla.gnome.org/show_bug.cgi?id=647807
Previously, we skipped rebuilding device items in case the device
had already been seen, but this caused the connected switch not to
be updated. Now it has been refactored to update in case the device
changes, and to create only when the device is completely new.
https://bugzilla.gnome.org/show_bug.cgi?id=647565
Connect to button-press-event on the menu item actor, not on the
slider, so any part that is highlighted is also clicked. This means
that click on the left of the volume slider is a rapid way to mute.
https://bugzilla.gnome.org/show_bug.cgi?id=646660
Adds a function that compares wireless networks and keeps them sorted
at all times. Order is: first already configured connections, then
first secure networks, then alphabtic. Also, the appearance of a new access
point no longer causes the whole menu to be rebuilt (but it still linear
searches for the position, I guess that could be skipped), which caused
the addition of more code for tracking the active access point.
https://bugzilla.gnome.org/show_bug.cgi?id=646580
Rename a few Panel fields and add a _statusArea object pointing to the
status area PanelButton objects. You can now address each item
consistently from lg:
Main.panel._activities
Main.panel._appMenu
Main.panel._dateMenu
Main.panel._statusArea.a11y
Main.panel._statusArea.volume ...
Main.panel._userMenu
https://bugzilla.gnome.org/show_bug.cgi?id=646915
If a JS object has an 'actor' property pointing to a ClutterActor,
include the actor's toString() output in the delegate's toString()
output. Eg:
js>>> Main.panel
[object Object delegate for 0xff6080 StBoxLayout.menu-bar "panel" ("Activities")]
https://bugzilla.gnome.org/show_bug.cgi?id=646919
To keep the app icon from overlapping the panel's (border-image)
border, a custom property for clipping the app menu icon's bottom
was introduced. But if the clip region is set before the initial
icon is set, the entire actor ends up clipped. Also due to the double
meaning of clutter_actor_get_height() (e.g. preferred height versus
allocated height), the clip region may end up too large and the icon
overlaps the panel's border-image.
Fix both problems by updating the clip region on size changes as
well, rather than on style changes only.
https://bugzilla.gnome.org/show_bug.cgi?id=644122
The IP_CHECK and SECONDARIES states should be considered part of the
"connecting..." phase.
DEACTIVATING should be its own stage, but that would break string
freeze, so we just treat it like DISCONNECTED for now.
UNMANAGED needs to be treated differently in 3.2, but it is too late
to fix it for 3.0.1.
https://bugzilla.gnome.org/show_bug.cgi?id=646946
Alt+Tab's special case of "switch to the most-recently-used window even if
it's in the same app" is actually an hindrance for users to get a firm mental
model of Alt+Tab. Now that we have Alt+Above_Tab the special case is no longer
needed.
https://bugzilla.gnome.org/show_bug.cgi?id=647907
Currently, the banner text is always located at the right of the
title - we need to swap those around for RTL locales. Rather than
using the locale directly to figure out the ordering, try to
determine the direction of the title label and let it control the
overall direction of the notification - this way, notifications
generally come out right when mixing scripts.
https://bugzilla.gnome.org/show_bug.cgi?id=646921
In the current implementation of the search entry, when replacing a
selected search term with another term, the first character of the
replacement is prepended to the hint text rather than starting a new
search. This fix makes sure that the focus is not lost when changing
the selected search term.
https://bugzilla.gnome.org/show_bug.cgi?id=636341
When updating search results, the current result set is
recreated from scratch before setting the selection
highlight. This results in two style changes of the selected
item, and as a CSS transition is used to animate the style
change, the selected item flickers if it remains the same as
with the previous search term.
Fix by hiding the result set until the selection is set, to
avoid the transition in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=646019
The addition of _backgroundStack to ModalDialog broke focus
navigation, because it was interposed between the focus group root and
all of the interesting content, but since it isn't an StWidget,
st_widget_navigate_focus() was unable to navigate through it. Fix this
by moving the focus root to this._dialogLayout (inside the
_backgroundStack) instead.
Additionally, in EndSessionDialog specifically, _initialKeyFocus
wasn't being set until after opening the dialog, so it was ignored.
Also change ModalDialog.close() to clear the _savedKeyFocus that
popModal() set, so that dialogs that are repeatedly closed and
reopened will have their focus revert back to _initialKeyFocus each
time.
https://bugzilla.gnome.org/show_bug.cgi?id=646740
The icon set as secondary icon of the search entry depends on whether
a search is active or not - clicking the icon should reset the entry
only in the former case. This is implemented by connecting/disconnecting
the 'secondary-icon-clicked' signal when updating the icon, but an
additional signal connection was left-over when refactoring the search
entry, resulting in clicks on the inactive icon removing the hint text.
Fix by removing the stray signal connection.
https://bugzilla.gnome.org/show_bug.cgi?id=646855
The change to StTextureCache for bug 644142 broke lg's inspector icon,
which was not specifying St.IconType.FULLCOLOR, but was relying on the
fact that SYMBOLIC (the default) would fall back to it. Fix the icon
by specifying FULLCOLOR explicitly.
(We should probably be using a symbolic icon here, but there is no
available icon with a select/pick/point-to/etc kind of meaning.)
https://bugzilla.gnome.org/show_bug.cgi?id=646451
When more than one device exists, we need to reset the section title's
device to null, and in that case we must show nothing (neither the switch
nor the label, but an empty label is OK anyway). Also, we need to
update the device statusItem immediately when constructing it, as we
may not get any state-changed.
https://bugzilla.gnome.org/show_bug.cgi?id=646074
NMDeviceModem._createSection was not checking whether it should have
shown the connection list, resulting in status item shown even if
the device was in an invalid state.
Also, fix a logic error when creating the operatorItem and fix overriding
_clearSection protected method.
https://bugzilla.gnome.org/show_bug.cgi?id=646395
NMApplet connects to each NMDevice's state-changed signal and stores
the signal handler id on the NMDevice itself. However, it was using
the same name as NMDevice itself was using to store the handler ID for
the underlying GObject's state-changed signal, thus overwriting it,
and resulting in *neither* signal handler getting removed if the
device went away. (This probably isn't a problem, since the device is
going away, but it causes a warning.)
Also, at least for WWAN devices, the device state changes to UNMANAGED
immediately before disappearing, but getStatusLabel() wasn't handling
that case and printed a warning instead. Fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=646708
If you restart NetworkManager, then the list of active connections
is emptied, then comes back with the same GObjects in it. If the
_primaryDevice field isn't cleared on the object, then we won't
know we need to set it back on the device, resulting in the active
device not showing up in the menu.
https://bugzilla.gnome.org/show_bug.cgi?id=646558
A notify signal does not include the new value of the property in
its signature, so the handler was trying to compare a GParamSpec with
a number when updating. Fix it to always retrieve the value from the
object.
https://bugzilla.gnome.org/show_bug.cgi?id=646443
ViewByCategories._removeAll clears the sections, but the filter passed
to view still expects them to exists. Therefore, refresh the view
after the section has been rebuilt and the All filter reapplied.
https://bugzilla.gnome.org/show_bug.cgi?id=645801
Right now, the network menu will overflow the screen if More...
is selected with many access points. As a short-term workaround
for this, add a scrollbar for submenus of panel dropdown menus
if they would cause the toplevel menu to overflow the screen.
- Put the actors in a PopupSubMenu in a StScrollView so we get
a scrollbar if the allocated space is smaller than the height
of the menu. Expand animation is turned off in the scrolled case
to avoid weirdness.
- When we pop up a panel menu, set a max-height style property
on the panel menu to limit it to the height of the screen.
- Hack event handling while the scrollbar is dragged to make
the scrollbar work properly.
https://bugzilla.gnome.org/show_bug.cgi?id=646001
Since the icon area is end-aligned, the signal strength icon for
insecure networks was ending up aligned with the lock icon for secure
networks. Fix that by always including a _secureIcon, but having it be
blank for the insecure networks.
https://bugzilla.gnome.org/show_bug.cgi?id=646121
Adding correct annotations to Gio.File.load_contents revealed that gjs
doesn't actually support array+length combinations. For 3.0 this would
be invasive to fix, so add a method to ShellGlobal which does what
we need.
https://bugzilla.gnome.org/show_bug.cgi?id=646333
Figuring out the size of an unmapped actor is not completely
reliable because styles aren't fully assigned until an actor
is mapped. So show the submenu before computing the size we
want to tween to.
https://bugzilla.gnome.org/show_bug.cgi?id=645949
Some connection types (like wimax) are not supported by the menu, and
should be ignored instead of throwing exceptions. Also, NetworkManager
had a bug that sent connections with invalid settings. This should not
happen, but in case it does, we will not blow up, but just log a warning
and continue silently.
https://bugzilla.gnome.org/show_bug.cgi?id=646355
When a device is connecting, we can continue showing available
connections and access points, as well as the active one with the dot.
(Hiding was a remnant of when the device status was on a different
menu item than the title)
https://bugzilla.gnome.org/show_bug.cgi?id=646381
