While it is obviously still an error to call get_theme_node() on a
widget that hasn't been added to the stage hierarchy yet, asserting
on it hasn't proven too successful in avoiding those errors - it's
likely the most frequent reason for crash reports. Just accept that
there'll always be code paths where we can hit this case and make
it non-fatal.
https://bugzilla.gnome.org/show_bug.cgi?id=610279
We will allow to use mode-specific overrides; in preparation for that,
move the code so that we only override preferences after initializing
the session mode.
https://bugzilla.gnome.org/show_bug.cgi?id=701717
Otherwise they break the "top level window" detection used by the
unredirect code in mutter, causes game windows not to be unredirected
when tray icons are present.
https://bugzilla.gnome.org/show_bug.cgi?id=701224
Currently we simply set the gsettings key when activating an input
source. This obviously introduces a time window, between the event that
activates the switch and when the switch is complete, under which key
events are being delivered to applications and interpreted according
to the previous input source.
The patches in bug 696996 introduce a DBus API in g-s-d that allows us
to know when an input source if effectively active. Using that and
freezing keyboard events in the X server until we hear back from g-s-d
we can ensure that events won't be misinterpreted after an input
source switch.
https://bugzilla.gnome.org/show_bug.cgi?id=697007
As with the screen recorder, the magnifier already adds its own
copy of the system cursor, so we should not add it again. Just
as in the screen recorder case, we don't address the case where
the cursor should not be included in the screenshot, but the
magnifier adds it anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=700488
The magnifier adds its own copy of the system cursor to apply the
expected transformations, so we don't need to add it again in the
recorder; this avoids two different cursors showing up in recordings,
but doesn't address the case where the cursor should not be recorded
at all, but the magnifier adds it anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=700488
It looks a bit unpolished to overlap our own chrome with the recording
icon, which may happen when an existing adds UI at the bottom edge.
Fix this by using the primary monitor's workarea for the position rather
than the entire monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=700409
Attaching gdb and running with G_DEBUG=fatal-warnings is not a very
fast to debug a specific issue (especially if you have warnings at
startup, since then you need to run the shell from a terminal).
Instead, introduce a new SHELL_DEBUG environment variable that can
be set to backtrace-warning, causing a gjs_dumpstack() after every
warning or critical.
https://bugzilla.gnome.org/show_bug.cgi?id=700262
Wrap new GtkMenuTracker API that adds an easy way to bind to
tracker items, and use it to add back support for submenus.
This also adds support for a submenu feature that we didn't
have support for before, action namespaces.
https://bugzilla.gnome.org/show_bug.cgi?id=700257
This pulls in new upstream API that Ryan will maintain, removing
code on our side.
Currently, our implementation of submenus will be gone, but this
will be fixed in a few commits.
https://bugzilla.gnome.org/show_bug.cgi?id=700257
We'll need some of these pieces to be introspectable when we port to
GtkMenuTrackerItem. Due to technical limitations in introspection, we
can't put Gtk-prefixed items in the shell namespace, so add them to
a new introspection library instead.
https://bugzilla.gnome.org/show_bug.cgi?id=700257
This is a hack we have in our local fork as compared to upstream;
work on a generic "hook" system in here is ongoing, but until then,
this is the easiest way to do it.
https://bugzilla.gnome.org/show_bug.cgi?id=700257
This includes a rename from the G* namespace to the Gtk* one, which
will help us with introspecting this code. Note that this removes
some of the custom code we added to GActionMuxer to relay event times
to the remote action group. We'll add this back soon.
https://bugzilla.gnome.org/show_bug.cgi?id=700257
Currently we will always record the entire screen. It has been requested
to support recording a specified area analogous to the screenshot API as
well, so add a set_area() method which allows this.
https://bugzilla.gnome.org/show_bug.cgi?id=696247
It is currently not always possible to predict the actual output filename
of a recording - the file-template does not necessarily use an absolute
path and may contain %d and %t escape sequences.
This is OK for fire-and-forget uses like the existing keyboard shortcut,
but we will soon expose the functionality on DBus and consumers of that
API might very well need to access the file after the recording. So do
the same as our screenshot API and add an optional (out) parameter to
record().
https://bugzilla.gnome.org/show_bug.cgi?id=696247
Some callers of the keyring prompt keep the dialog up while
processing the prompt. Allow the user to cancel the prompt
while in this state.
This is propagated to the caller, who can cancel the operation
in question when this occurs.
https://bugzilla.gnome.org/show_bug.cgi?id=682830
The shadows are currently rendered by painting the actor we want to
apply shadow on, in an offscreen buffer. The problem is that when this
actor has an allocation padding (ie allocation that isn't at 0x0
relatively to its parent), this padding is added within the offscreen
buffer and as a result the shadow rendering is truncated because the
offscreen buffer size is the size of the allocation box, not the
allocation box + padding.
This patch reposition the actor at 0x0 with rendering it by changing
the initial transformation matrix when rendering the actor offscreen.
https://bugzilla.gnome.org/show_bug.cgi?id=698301
This makes it much easier to implement correct popup-menu behavior
in the case of nested bins.
This fixes the context menu key in application search results when a
result has focus.
https://bugzilla.gnome.org/show_bug.cgi?id=699800
The comment clearly intended that for this to be the case, but a typo
prevented this from actually being done. This fixes the focused state
of the search field not working more than once.
https://bugzilla.gnome.org/show_bug.cgi?id=699799
In most cases, we'll transition between two states on hover / focus.
Instead of recalculating and repainting our resources on state change,
simply cache the last state when we transition.
https://bugzilla.gnome.org/show_bug.cgi?id=697274
The background image, background image shadow and border image are
allocation-indepedent, so we can keep these in the node. Given that these are
are likely cached in the StTextureCache, the slight increase in code complexity
may not be worth caching these textures and materials -- we might be better off
just computing when we need to paint.
https://bugzilla.gnome.org/show_bug.cgi?id=697274
This ensures that two widgets sharing the same theme node won't trample
on each other's prerendered materials if the actors are of different
sizes. This also tries to be very careful to share as much as possible
during a transition.
This has the side effect that if a widget changes state a bunch of times,
we won't cache every state. Since we expect that state changes are
infrequent and that most cases we'll be able to use the texture cache
to do most of the heavy lifting, this cost is much more insignificant
than rendering a number of different actors with the same theme node
and different sizes.
https://bugzilla.gnome.org/show_bug.cgi?id=697274
Since we now share theme nodes between, we shouldn't cache the paint state
across all nodes. As a first step towards putting this in the actor, split
out the state into another structure. Keep it in the theme node for now
so that we don't make too many changes in one commit.
It's possible that some of these pieces of drawing state could be shared
between theme nodes. For the sake of simplicity, assume that none of them
are shared or should be shared. A future commit could identify those that
could be shared and move them back into the theme node.
https://bugzilla.gnome.org/show_bug.cgi?id=697274
We want to put the paint state in the actor rather than in the theme
node, as having two actors with different sizes but the same theme node
is now much less efficient.
https://bugzilla.gnome.org/show_bug.cgi?id=697274
This simplifies the code required to build remote menus and
put all the items in the right place, and makes us share our
implementation with GTK+.
https://bugzilla.gnome.org/show_bug.cgi?id=698427
Similar to the existing generic getter methods, add lookup functions
for URL properties like the standard background-image/border-image
properties.
https://bugzilla.gnome.org/show_bug.cgi?id=693688
The changes from commit b4f5f1e461 and b394d184cc increased the
instructions required for the fade fragment shader. This is over the limit
for some hardware (like intel gen3), which causes the driver to fallback
to software rendering for the shader. The result is that painting a scrollview
that has a fade effect takes around 30 (!!) seconds.
So lets go back to the old effect for 3.8 until we find a solution.
https://bugzilla.gnome.org/show_bug.cgi?id=696404
Previously when a client requests that a window should be docked the
shell would reparent the socket window onto the stage's window and
then use ClutterX11TexturePixmap to get a texture to represent the
window. This will not work if Clutter is no longer using the X11
winsys for example if it becomes its own display server. Instead this
patch leaves the socket window as a child of the root window and lets
mutter create a MetaWindow out of it. If Mutter is acting as a display
server then this mechanism will still work via the headless x server.
The ShellGtkEmbed instance now registers for notification of the
‘window-created’ signal of the display so that it can find the
MetaWindow that gets created to represent the socket window. When this
window is found it is prevented from being displayed on the screen by
setting the actor's opacity to 0. An input shape is then set on the
window to prevent it receiving any input.
Instead of being a subclass of ClutterX11TexturePixmap, ShellGtkEmbed
is now a subclass of ClutterClone. When the MetaWindow is found for
the socket window the clone's source is set to the invisible actor for
the window so it can be displayed in the panel as before.
The ShellEmbeddedWindow no longer needs to know what the stage is
because it no longer reparents the socket window. Therefore the
ShellTrayManager doesn't need to know the stage either so
shell_tray_manager_manage_stage has been replaced with just
shell_tray_manager_manage_screen.
https://bugzilla.gnome.org/show_bug.cgi?id=693438
Pointer tracking is broken when the pointer is over the stage input
area. This is apparently fallout from mutter going to XInput2.
This commit changes the mouse event handling code to also use XInput2.
https://bugzilla.gnome.org/show_bug.cgi?id=695324
Curently it is possible to copy the content of password entries,
and paste it elsewhere in clear text. This is undesirable, so
follow GTK+'s behavior and disable the cut/copy actions for
password entries.
https://bugzilla.gnome.org/show_bug.cgi?id=695104
Doing so causes useless full stage redraws and breaks culling
as clutter cannot know how the signal handler affects painting.
So use clutter_threads_add_repaint_func_full instead.
https://bugzilla.gnome.org/show_bug.cgi?id=694988
Since commit b4f5f1e461, the effect is eased in at the scroll
view's edges so that it does not appear out of nowhere. However,
the linear easing used is not the best option, as now the effect
appears so late that content near the edges ends up just being
cut off rather than faded out.
So adjust the easing function to have the effect appear faster.
https://bugzilla.gnome.org/show_bug.cgi?id=694327
g_str_has_prefix() will assert when passed NULL, so we need to make
sure that we are passed a non-NULL log_domain first.
Spotted by <goughost<at>yahoo.com.cn>
https://bugzilla.gnome.org/show_bug.cgi?id=663601
If enabled, scrollbars take away from the allocation given to the
view's content. This is usually preferrable to painting the bars on
top of the content, but there are exceptions, for instance when the
content needs to be centered with regard to the view as a whole.
Add a :overlay-scrollbars property to account for those cases.
https://bugzilla.gnome.org/show_bug.cgi?id=694261
This commit updates the code to use mutter's new background
api, and changes the shell's startup animation to be closer
to the mockups.
Based on initial work by Giovanni Campagna
https://bugzilla.gnome.org/show_bug.cgi?id=682429
We cannot reset the cursor at the next leave event, as that might
happen on a NULL stage and cause a BadWindow error, so do it on
unmap (which is guaranteed to happen before the stage is cleared).
https://bugzilla.gnome.org/show_bug.cgi?id=694057
As we use g_slist_prepend for efficiency when building the list
of results before ordering it, we need to make sure we traverse
the list of previous results backwards so that it's built in
the same order.
https://bugzilla.gnome.org/show_bug.cgi?id=693936
GdkPixbuf is stored in memory as individual bytes, in strict red-green-blue-alpha
order, while cairo image surfaces are stored as 32bits units whose
order depends on the endianess.
It is probably possible to do something better, taking advantage
of cogl and the GL using the actual component order, but for now
it is easier to use the GDK utility to convert the cairo surface.
https://bugzilla.gnome.org/show_bug.cgi?id=693931
While we were relying on gtk_icon_info_load_icon and friends being
thread-safe, there was no such guarantee, and recent caching that
was added to GTK+ made it non-threadsafe. To replace it, _async()
variants of the icon loading code were added that are thread-safe.
Use those instead of using our own worker threads.
https://bugzilla.gnome.org/show_bug.cgi?id=692845
Use GdkPixbuf rather then cairo_surface_write_to_png_stream when saving
screenshots because this allows us to embedded metadata into the file which
is used by the background control panel to filter out screenshots.
https://bugzilla.gnome.org/show_bug.cgi?id=693737
The notifications spec has two hints for playing a sound, sound-file
and sound-name. We can support them using the existing code that
wraps libcanberra.
https://bugzilla.gnome.org/show_bug.cgi?id=642831
We have to mark the cairo_surface dirty after modifying the data behind
cairo's back.
Also use CAIRO_FORMAT_ARGB32 rather then CAIRO_FORMAT_RGB24 for the
surface to be consistent with the rest of the code.
https://bugzilla.gnome.org/show_bug.cgi?id=691715
Instead of using Clutter to add an event filter for X events it now
uses the GDK API. The Clutter API won't work if Clutter is not using
an X11-based backend such as if Mutter is directly running with the
KMS backend. This is a step towards making Mutter be its own display
server and a step towards being a Wayland compositor. In this case GDK
will still be using the X backend because it will connect to the
headless X server.
https://bugzilla.gnome.org/show_bug.cgi?id=693438
As pressure barriers need a signalling mechanism to provide
information about when and where they are hit, an object which
provides a signal is a more appropriate abstraction for a pointer
barrier than a functional ID-based approach. Mutter has gained
pointer barrier wrappers, so use its objects instead of ours.
https://bugzilla.gnome.org/show_bug.cgi?id=677215
Before version 1.2 of GLSL it would not implicitly convert from int to
float which meant that if you compare a float variable with an integer
constant it will generate a compile error. In particular this means
that on GLES2 (which uses GLSL 1.0) the scroll view shader will not
compile on pedantic compilers, which includes Mesa. This patch just
changes it to use floating point constants.
https://bugzilla.gnome.org/show_bug.cgi?id=693339
Instead of directly using symbols from GLX to check for the swap event
notification, the plugin now first verifies that the Cogl renderer is
actually using the GLX winsys and then indirectly fetches the pointers
for the GLX functions using cogl_get_proc_address. That way it will
continue to work if Cogl is using an EGL winsys.
Nothing in the Gnome Shell plugin now directly uses symbols from libGL
so we don't need to link to it. This helps to avoid problems linking
against two GL APIs when cogl is using a non-GL driver such as GLES2.
https://bugzilla.gnome.org/show_bug.cgi?id=693225
Cogl sets this for us since commit 2701b93f159bf2d3387cedf2d06fe921ad5641f3.
Setting it twice is illegal and causes compile failures:
error C0204: version directive must be first statement and may not be repeated.
This commit removes all the code in charge of playing with the database of
mobile providers, which was originally included in order to perform
MCCMNC->OperatorName and SID->OperatorName conversions.
This logic is now exposed by libnm-gtk.
https://bugzilla.gnome.org/show_bug.cgi?id=688943
Environment variables should be checked for zero length,
instead of non-zero. This prevented the script to run
correctly in a jhbuild shell for example.
https://bugzilla.gnome.org/show_bug.cgi?id=693031
Clutter translates keyboard state internally, and clears the lock bits
from modifier state, so translating again results in the wrong keysym.
Given that Clutter already gives us a fine keysym, we don't need this.
https://bugzilla.gnome.org/show_bug.cgi?id=692586
As theme nodes keep a cache of matched properties, we need to make
sure to update it when the list of stylesheets changes. In particular
this fixes a regression from commit dc2ec0a8f9, which caused
extensions with stylesheets to crash the shell when re-enabled (for
instances when coming back from the lock screen).
https://bugzilla.gnome.org/show_bug.cgi?id=692994
StThemeNodes cache matched properties from stylesheets, so when the
list of custom stylesheets changes, the node may miss better matches
(when a stylesheet was added) or have pointers to invalid memory in
the list (when a stylesheet was removed).
In order to allow theme nodes to listen for stylesheet changes, add
an appropriate signal to StTheme.
https://bugzilla.gnome.org/show_bug.cgi?id=692994
gnome-control-center is planning on removing its own tree in the
future. Since it already installs these applications into
/usr/share/applications, just use this for now.
https://bugzilla.gnome.org/show_bug.cgi?id=692483
Since we also support passing a basename now, clients might be
interested in knowing the path used to save the file.
Add an out argument to the interface for that.
https://bugzilla.gnome.org/show_bug.cgi?id=688004
If a non-absolute path is passed to the screenshot methods, treat it as
a basename for the output image, and automatically try to save it in
$XDG_PICTURES_DIR, falling back to $HOME if it doesn't exist.
https://bugzilla.gnome.org/show_bug.cgi?id=688004
According to css3-transition, transition-duration is expressed
as a time, that is, in seconds or milliseconds. Fix that by
recognizing numbers with units and implicitly converting to
milliseconds after parsing.
https://bugzilla.gnome.org/show_bug.cgi?id=681376
The code here before was added as dummy code to satisfy an error
in the missing switch, and wasn't ever tested due to the lack of XI2
in mutter. Use the same math as GtkRange does to calculate scroll bar
positions from raw XI2 deltas to allow for proper smooth scrolling.
https://bugzilla.gnome.org/show_bug.cgi?id=687573
realpath() does a series of lstat() on each path component to resolve
symbolic links, but we just want to get an absolute path, and we don't
really care if it is physical or not. Going through a GFile does the
canonicalization we need, and is a lot faster.
https://bugzilla.gnome.org/show_bug.cgi?id=687881
StWidget considers "same theme node" as an indication that the style
did not change, and skips emitting style-changed in that case. This
means that icon theme changes are not picked up by StIcon.
https://bugzilla.gnome.org/show_bug.cgi?id=689353
Decorations are fairly uncommon in gnome-shell, so it's
worthwhile to avoid effort creating empty attr lists. This
can also help prevent a relayout.
https://bugzilla.gnome.org/show_bug.cgi?id=689400
Coverity rightly complained about the context < 0 comparison.
In addition, context was shadowing the parameter of the same
name, and the loops over the attributes were unnecessarily
running all the way.
https://bugzilla.gnome.org/show_bug.cgi?id=689325
This was due to incorrect pixel clamping, which bounced the height
of the actor between values. Just remove pixel clamping, as Clutter
will correctly do it for us.
https://bugzilla.gnome.org/show_bug.cgi?id=689243
This doesn't (or shouldn't) change the visual appearance of the fade
effect, but does do all the testing math inside the shader, rather
than on the CPU. This will make fading the offset much easier in
the future.
https://bugzilla.gnome.org/show_bug.cgi?id=689249
GLSL 1.20 is a better language, and we'll rely on it in future updates.
This doesn't have any additional constraints, since GLSL 1.20 was
standardized before GLSL-supporting drivers came out.
https://bugzilla.gnome.org/show_bug.cgi?id=689249
Theme nodes are interned and shared with other widgets, so they cannot
be disposed, otherwise we blow useful resources, and in particular we
break the parent-child chain.
https://bugzilla.gnome.org/show_bug.cgi?id=689029
We where not setting a duration for the frames, which caused the resulting videos to
have a broken header.
Fix that by making the source a live source and setting the correct frame duration.
https://bugzilla.gnome.org/show_bug.cgi?id=688487
The AnimatedIcon does not have an API for controlling the animation but
relies on the :visible property changes to start and stop a timeout used
to update the frame.
This has the inconvenient of having a side effect when visible is set to
true multiple times, and is not really the API expected from such
component. Also, there is a race if it is displayed before the images
are loaded: there is no child yet and thus we get this._frame = NaN
which leads to a crash.
Switch to a play/stop API instead, and add a load event callback to the
TextureCache.load_slice_image to exactly know when we can start using
the images.
https://bugzilla.gnome.org/show_bug.cgi?id=687583
We are currently using a hack to allow a select set of keybindings
in the overview. Implement the new MetaPlugin keybinding_filter
hook, which provides a cleaner way to achieve the same.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
It appears to be somewhat common for st_widget_style_changed() to be
called when no style-relevant attributes have, in fact, changed. Now that
we cache theme nodes, we're likely to get the same theme node back from
the cache. If we do, we don't need to waste time asking whether its
geometry and painting are equal to itself: we can just note that nothing
really changed and get on with our lives.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=687465
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
If you copy a theme node's paint state into itself, it should be an
inexpensive no-op. What actually happened was that we destroyed the
old paint state, re-initialized to blank, then copied the blank state
back into itself. In the process, we lost (for instance) the textures
for rounded corners.
Until I introduced the texture cache, this never actually happened,
because when st_widget_recompute_style() calls st_widget_get_theme_node(),
we'd always get a fresh theme node. Now, we get a theme node T back
from the cache, notice that paint_equal(T, T) is true, short-circuit
slightly by copying its drawing state into itself, and destroy drawing
state that we still needed.
I'm going to fix this in recompute_style() too, but as a general
principle, self-assignment ought to be harmless.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=687465
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Because we calculate and cache CSS properties once per StThemeNode,
and only a certain set of attributes can affect the CSS properties,
it's advantageous for as many widgets as possible to share a single
StThemeNode. Similarly, if a widget changes state and then changes back
(e.g. gaining and losing the :hover pseudo-class), it should ideally
get its original StThemeNode back again when it returns to the old
state.
Here, I'm using the StThemeContext as the location for a cache.
StThemeNodes are currently never freed: this seems OK for Shell's usage
(a finite number of IDs, classes, pseudo-classes and types).
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=687465
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
In my testing this cuts the longest time to dispatch(), when showing the
calendar menu for the first time, from 604 to 442 milliseconds,
while reducing additional_selector_matches_style() from 32% to 13% of
CPU time used.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=687465
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
The descriptions for keybindings shared with Metacity are now
duplicated in Mutter, so only use the latter to avoid duplicate
entries in System Settings.
https://bugzilla.gnome.org/show_bug.cgi?id=687672
The screen grabber was a workaround for an extremely slow path in Mesa
when reading back pixel data from the frame buffer. It was using pixel
buffer objects by directly calling into GL to hit a fast blit path in
Intel's driver. This should no longer be necessary with the latest
Mesa because the normal read pixels path now has a fast path to just
memcpy the data. Using PBOs in that case just adds an extra
indirection because the data is read into an intermediate buffer and
then copied back out again.
We want to be able to remove the dependency on linking against libGL
directly from Gnome Shell because that will not work if Cogl is
actually using GLES. Also libGL includes GLX which means gnome-shell
ends up with a hard dependency on Xlib which hinders the goal of
getting Gnome Shell to be a Wayland compositor.
https://bugs.freedesktop.org/show_bug.cgi?id=46631https://bugzilla.gnome.org/show_bug.cgi?id=685915
shell_mobile_providers_parse() was returning the country information split
into a hash table with providers and a hash table with country names. This
patch merges both outputs into a single per-country object, so the parse()
method now returns a GHashTable with the following element-type:
(element-type utf8 ShellCountryMobileProvider>)
This also avoids more complex setups like returning lists inside of hash tables,
which was actually breaking either g-i or gtk-doc.
shell_mobile_providers_parse() was also modified to allow inputting the paths
of the country codes and provider list files to use. If paths are not given, the
default ones will be used. This helps us to provide test files during unit
tests.
Both the findProviderForMCCMNC() and findProviderForSid() methods are exported
out of the GSM and CDMA specific classes, and new unit tests for them are
implemented. Tests can be run manually with:
$> ./tests/run-test.sh tests/unit/mobileProviders.js
https://bugzilla.gnome.org/show_bug.cgi?id=687356.
Rather than using a complicated set of function calls across
library boundaries and our own scanning logic, use strtok(),
which glibc already provides, and is probably much more optimized.
https://bugzilla.gnome.org/show_bug.cgi?id=687465
* Fix wrong parameter name to on_name_appeared callbacks
* optparse doesn't just leave extra command line arguments, it
errors out, so don't try to pass through extra arguments -
instead add explicit passthrough for '--replace'
* Fix usage of Gio.DBusProxy
* Add a default value for --perf so that if it's not supplied
things don't die with a mysterious error message. (This wasn't
needed when --perf enabled perf-mode)
https://bugzilla.gnome.org/show_bug.cgi?id=687287
The libedataserverui dependency is a relic of the old E-D-S API.
As of 3.6.0, E-D-S now centralizes authentication prompts so clients
don't have to display their own. This also allows trading the GTK+
main loop for a plain GMainLoop in gnome-shell-calendar-server.c.
https://bugzilla.gnome.org/show_bug.cgi?id=687189
Often the first thing a user wants to do after making a recording
is post it somewhere.
This commit adds the video to recently used items, so that it shows
up prominently in open file choosers.
https://bugzilla.gnome.org/show_bug.cgi?id=680647
Recording continues for some time after the recorder object
is closed, since closing isn't a synchronous operation.
This commit defers quiting the test-recorder application until
the recording is finished.
https://bugzilla.gnome.org/show_bug.cgi?id=680647
We want to make sure the recorder isn't finalized until the
saved recording hits disk. This means the pipeline object needs
a hard reference on the recorder.
https://bugzilla.gnome.org/show_bug.cgi?id=680647
The stage is a floating object. We don't own a reference
to it, so we shouldn't unref it.
This commit removes the erroneous unref call and makes sure
we call clutter_actor_destroy on the stage when we're done
with it.
https://bugzilla.gnome.org/show_bug.cgi?id=680647
While looking at how the plymouth implementation was built, I was so
short-sighted and focused on the string "_XROOTPMAP_ID" that I didn't
realize it was the name of the standard background on the root window.
Remove our own implementation, and switch to using a standard mutter
MetaBackgroundActor.
https://bugzilla.gnome.org/show_bug.cgi?id=682428
Currently we miss changes to a file referenced in background-image
or border-image.
Connect to the StTextureCache::texture-file-changed signal to keep
up with file changes and update the drawing state if necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=679268
For textures loaded from files, the cache might hide image changes
by keeping the data of a previous version around indefinitely. For
instance AccountsService will notify of avatar changes, but as new
image is copied over the old one, we will continue to use the old
image data.
Install a file monitor for each file resource we load and clear
the corresponding data from the cache on changes, emitting the
new StTextureCache::texture-file-changed signal.
https://bugzilla.gnome.org/show_bug.cgi?id=679268
ClutterText will only queue a relayout after font changes if it has
any contents other than the empty string. As a result, its height
request may change after the first character has been entered. To
avoid this visual glitch, force a relayout on actual font changes.
https://bugzilla.gnome.org/show_bug.cgi?id=685534
The actor's GtkIMContext is freed in dispose and reset in unrealize - as
ClutterActor's dispose will unrealize the actor if necessary, chaining
up to the parent after clearing the im context will result in warnings
if the actor is still realized, so chain up first.
https://bugzilla.gnome.org/show_bug.cgi?id=686016
The application menu is currently unusable with non-maximized
windows when using focus-follows-mouse mode. Override mutter's
focus-change-on-pointer-rest preference, so that the actual
focus change is delayed until the pointer stops moving.
https://bugzilla.gnome.org/show_bug.cgi?id=678169
The signals for the action group were being disconnected when the action
group was explicitly removed from the GActionMuxer but the same was not
being done when it was finalized.
This means that a change in the state of an action group that used to be
associated with a finalized GActionMuxer would result in a crash. This
would happen for stateful application actions after closing a window.
https://bugzilla.gnome.org/show_bug.cgi?id=681399
For performance reasons, resources required to paint a widget are
aggressively cached; we know of at least one case where our caching
prevents updating the used background-image correctly, so add explicit
API to clear all associated cache data.
https://bugzilla.gnome.org/show_bug.cgi?id=679268
StThemeNode caches its resources aggressively to keep the required
work on paint to a minimum - right now, resources are only recreated
on allocation changes.
In order to update the background-image property correctly when the
underlying file changes, resources need to be recreated without a
size change, so add an explicit method for that.
https://bugzilla.gnome.org/show_bug.cgi?id=679268
The current API assumes that image data loaded from files remains
valid during the life time of the shell. This assumption is mostly
valid for image files we provide ourselves (with the exception being
designers working on those files), but not necessarily for "external"
files - provide API to explicitly remove cached data associated with
a URI for those cases.
https://bugzilla.gnome.org/show_bug.cgi?id=679268
The screenshield requires gdm 3.5, which can be problematic in
jhbuild configurations, or distributions that don't use GDM as the display
manager. Allow transparent fallback to gnome-screensaver in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=683060
The speed and quality properties have been removed in favor of properties
closer to the upstream library.
Removing the properies from the pipeline would result into a huge
slowdown so we have to map the old values to the new ones.
According to the source code of the old vp8enc element quality maps to
(int)(63 - quality * 6.2) for min_quantizer and max_quantizer, while
speed maps to cpu-used = speed == 0 ? 0 : (speed - 1).
So set min_quantizer and min_quantizer to 13, and cpu-used to 5 based on
the above formulas.
https://bugzilla.gnome.org/show_bug.cgi?id=684206
Remove the PlacesManager, its search provider and all associated code.
Places search is now provided by nautilus using the external search
provider API.
https://bugzilla.gnome.org/show_bug.cgi?id=683506
Rather than unconditionally removing a focus root in remove_group(),
decrement a counter that add_group() increments, and only actually
remove a focus root when the counter drops to 0.
https://bugzilla.gnome.org/show_bug.cgi?id=682243
When using an input method like IBus, the IM is expected to process
key events before anything else. Currently this doesn't always work
as expected, as the event filtering is done in the default handlers
of the key-press and key-release events, e.g. only after other
handlers have been run.
To allow the IM to filter events earlier, move the code to a
captured-event handler instead.
https://bugzilla.gnome.org/show_bug.cgi?id=658325
If an actors is not mapped (visible and all parents visible), then don't
allow navigating focus to it.
This fixes a regression in the keyboard navigation of the panel with
invisibile items.
https://bugzilla.gnome.org/show_bug.cgi?id=683529
st_texture_cache_load_from_raw() enforces a square ClutterTexture,
resulting in the texture being stretched if the passed in image
data has a different width:height ratio.
Add padding in those cases as we already do when loading from pixbufs.
https://bugzilla.gnome.org/show_bug.cgi?id=683483
Clutter will try to unmap during a dispose if we have a parent, so if we
set our own actor to NULL before the chain up, we're going to attempt to
unmap our own NULL actor. Fix that by swapping the order in which we
chain up.
https://bugzilla.gnome.org/show_bug.cgi?id=672790
The default filename isn't localized and isn't the same one that
the shell sets. Just remove the fallback mechanism, and abort
recording if somebody didn't set the filename
https://bugzilla.gnome.org/show_bug.cgi?id=677434
Components are pieces of the shell code that can be added/removed
at runtime, like extension, but are tied more directly to a session
mode. The session polkit agent, the network agent, autorun/automount,
are all components, keyring, recorder and telepathy client are all
now copmonents.
https://bugzilla.gnome.org/show_bug.cgi?id=683156
The supposed reason for launching the calendar server in a peculiar
way was so that the process would be killed when the Shell was killed,
but that didn't actually work. Launch the calendar server through auto-start,
and persist all throughout the session.
https://bugzilla.gnome.org/show_bug.cgi?id=683156
Introduce a StShadowHelper to manage drop shadows from JS (which
cannot use Cogl directly), and use it in a new StWidget-derived
JS class to draw the arrow.
https://bugzilla.gnome.org/show_bug.cgi?id=682285
Reroute setting those properties to a GIcon. API users are expected
to create GIcon directly now.
The advantage is that from a StIcon you can now create a similar one
by accessing :gicon.
https://bugzilla.gnome.org/show_bug.cgi?id=682540
The original design for the overview had buttons for searching for
Wikipedia and Google, but in practice this is a bad idea. The buttons
are the default activations, meaning that using the overview as a
fluent motion of launching something - "firefxo<Enter>", will launch
Google/Wikipedia.
https://bugzilla.gnome.org/show_bug.cgi?id=670168
If the user is already active when the notification pops up, we
won't get an idle watcher because there's no transition from
active to idle or vice versa. Correct this by initializing the
state correctly from XSync.
StScrollBar was intercepting motion events by using captured-event on
the stage, which required additional dirty tricks, which required
additional hacks. Simplify it by just using clutter_grab_pointer()
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=671001
It doesn't make sense to have multiple ShellIdleMonitors, since
each has its own GDK filter function, but they all get the same
events. In preparation for having it accessed from other places
than the message tray, make it a singleton.
https://bugzilla.gnome.org/show_bug.cgi?id=682041
Add support for the CSS "background-repeat" property. Currently, this
only supports on/off, rather than allowing tiling in each individual
dimension. It is supported for both the cogl and cairo rendering paths.
https://bugzilla.gnome.org/show_bug.cgi?id=680801
gnome-session and gnome-settings-daemon rely on the screensaver
interface to know the locked state. Since gnome-screensaver is no
longer running, it's up to gnome-shell to provide it.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
To allow more than one summary icon actor for a source we split
the model of the source icon (which is iconName, if the default
implementation is used, or a GIcon otherwise) and replace
createNotificationIcon() with a generic createIcon(size). Also,
the actual source actor is split into a separate class, that handles
the notification counter automatically.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
The :reactive property is used on StButton to like the :sensitive
property on GtkWidgets, that is, to indicate that the user is not
(yet) expected to click the button, and therefore should affect
styling too.
This allows to remove some code at the JS layer.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
While modal dialogs were attached to the parent's titlebar, it
made sense to leave the top of the parent window at full color.
With the new position of modal dialogs, it makes more sense to dim
the entire parent window, so we can use a combination of Clutter's
BrightnessContrast- and DesaturateEffect instead of our own custom
shader.
https://bugzilla.gnome.org/show_bug.cgi?id=674499
We used to use realize/unrealize instead of map/unmap in ShellEmbeddedWindow
because there originally was no map/unmap. The days of this are long gone...
https://bugzilla.gnome.org/show_bug.cgi?id=672790
This currently causes the shell to freeze very often in a thread
deadlock, and the gjs garbage collector behavior is currently getting
fixed at the right level in gjs itself.
https://bugzilla.gnome.org/show_bug.cgi?id=679832
When selecting "Open Calendar" in the date menu, the configured
application is launched via command line, so we don't get any
startup notification. In order to fix the issue at least for our
default calendar, add a hidden .desktop file for evolution's
calendar component.
https://bugzilla.gnome.org/show_bug.cgi?id=677907
get_app_for_window() is (transfer full), but shell_app_system_lookup_wmclass()
is (transfer none), so we must reference the result, or crash
occur.
https://bugzilla.gnome.org/show_bug.cgi?id=678992
When running with Valgrind, this helps us ensure that we're managing
memory correctly. We need to GC twice as finalizing an object in the
sweep can unroot objects which were already marked. Technically, it
could be that we'll need to GC more than twice, but GCing twice should
hopefully last us for now.
https://bugzilla.gnome.org/show_bug.cgi?id=678737
clutter_actor_get_children returns a newly allocated GList and it was
not freed.
However, as there's no reason to copy the children list, switch to
iterator api.
https://bugzilla.gnome.org/show_bug.cgi?id=678406
The dependency chain spirals out from folks->zeitgeist->xapian...and
I'm really not interested in pulling in all of that into the core
shell.
There is work on splitting out contact search into gnome-contacts; I'd
add a bug link but Bugzilla is down.
Currently we assume that GTK_UNIQUE_BUS_NAME is shared between all
windows of an application. This assumption does not hold true for
applications that specify G_APPLICATION_NON_UNIQUE, so make sure
to update the menu as necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=676238
There is a race if a channel is invalidated during its preparation: the
'invalidated' signal is already emitted so the Shell will never notice.
We fix this by simply checking if the channel is already invalidated when
receiving it from telepathy-glib.
In the approving case, we reject the full ChannelDispatchOperation as we only
support approving one channel at the time.
https://bugzilla.gnome.org/show_bug.cgi?id=677457
Commit de8a66d4ce removed our own DPI handling for the one found
it Clutter, but broke resolution updates at runtime (for instance
when setting the "Large Text" option in Universal Access).
https://bugzilla.gnome.org/show_bug.cgi?id=677975
We explicitly include NoDisplay applications in the ShellAppSystem because
we want app tracking for them, but we explicitly filter NoDisplay applications
out when showing them to the user because we don't want to show them to the
user. We also based our "All" apps view on a flattened list of apps. While
we did check for NoDisplay on the app item itself, we didn't check against
its parents. Refactor the app display view to not use a separate flat list
of applications, but instead a concatenation of all the applications in all
the loaded categories.
https://bugzilla.gnome.org/show_bug.cgi?id=658176
Instead of falling back to a set of default values or crashing the
window manager when an invalid mode is specified, check the value
of the ShellGlobal:session-mode property before taking over as WM
and make a clean exit if it cannot be resolved to an existent mode.
https://bugzilla.gnome.org/show_bug.cgi?id=676156
Add a session-mode property on ShellGlobal which corresponds to the
new --mode switch. Make the existing ShellGlobal:session-type property
readonly and base it on ShellGlobal:session-mode to avoid conflicts.
https://bugzilla.gnome.org/show_bug.cgi?id=676156
ShellApp keeps track of windows sorted by most recently used first
which means that when raising windows we need to start from the end of
the list to finish with the correct stacking order.
This patch just makes the code agree with the comment which was
already there.
https://bugzilla.gnome.org/show_bug.cgi?id=676371
Add a dummy call to shell_js_add_extension_importer() to ensure that the
link to libgnome-shell-js.so is not removed when using -Wl,--as-needed,
which is the default on many distros.
https://bugzilla.gnome.org/show_bug.cgi?id=670477
Depending on the exact linker options and versions, rpath's written
into the binary may, or may not, be honored by dlopen(). Work around
this by simply linking the gnome-shell binary to gnome-shell-js, since
then dlopen() doesn't need to search paths.
https://bugzilla.gnome.org/show_bug.cgi?id=670477
It doesn't make sense to have multiple requests for the same
connection/setting combination at the same time, since we would be
asking the user twice for the same password. Instead, report cancellation
to NetworkManager if this happens.
Note that does make sense to have multiple requests in sequence though
(they could have different flags), but this is not affected.
https://bugzilla.gnome.org/show_bug.cgi?id=674961
Lots of things here were unused. First, we don't need to calculate
the js_dir when not running from the source tree, which makes the
branch mostly empty, meaning we can merge the two branches.
This allows us running uninstalled. While we're at it, though, remove
JHBUILD_TYPELIBDIR. jhbuild shell should add its own stuff to GI_TYPELIB_PATH,
and we don't want to half reimplement jhbuild. The wrapper script should be
solely for the case of running from the source directory, and not care about
jhbuild at all.
If start_shell throws an exception for whatever reason, the finally
handler will run before shell has been set, leading to a "referencing
an undefined local variable" error.
If a request isn't found in shell_network_agent_set_password() or
shell_network_agent_respond(), then g_return_if_fail() rather than
crashing. OTOH, if a request is not found in
shell_network_agent_cancel_get_secrets(), then just ignore it
silently, since that could legitimately happen.
https://bugzilla.gnome.org/show_bug.cgi?id=674961
Right now, we are hard-depending on the presence of Evolution by
using its settings schemas. This is likely to be unpopular, and
also causes instability if someone happens not to have Evolution
installed, so install a schema that has the same data path as
the Evolution schema, but a different name and install that
for the keys we need.
To avoid a string-freeze break, we rely on the translations in
Evolution - if Evolution isn't installed, the key descriptions
will be untranslated in dconf-editor.
https://bugzilla.gnome.org/show_bug.cgi?id=674424
This swaps a use of GLfloat for a regular float. Cogl might stop
including a GL header in its public headers soon so this would fix a
compilation error.
https://bugzilla.gnome.org/show_bug.cgi?id=672711
If run under jhbuild, gnome-shell is in PATH, so trying to restore
is just running it again, likely failing in the same way (with the
additional problem of detaching the shell from the terminal). Also,
this is using deprecated GConf keys, and deprecated pygobject
bindings.
The jhbuild wrapper is expected to be run through jhbuild run, or
in the uninstalled case inside a jhbuild shell, so there should
be no need to set XDG_DATA_DIRS and friends.
dconf-daemon is available since 2.32, so there is no need to
start it manually (and in fact, it should not be running normally).
Similarly, notify-osd and notification-daemon should not be
dbus activated, but rather autostarted by gnome-session, and
therefore not running in a gnome-shell session.
Introduce a new gnome-shell-perf-tool, which can be used instead
of the old gnome-shell-jhbuild wrapper to gather data about gnome-shell
performance and submit to shell-perf.gnome.org. This runs the
shell with no extra setup beyond the WM_CLASS filter, so it can
be used for a jhbuild setup or for an installed shell.
Currently the scroll event code only handles scroll events if the
adjustment's value is within the "lower" and "upper" limits. The
likely intent was to pass events to a parent scroll view when
reaching the bounds (uh, nested scroll views!), but apparently
we never made use of this, as the upper bound is actually wrong
(an adjustment's maximum value is upper - page_size, not upper).
Just handle all scroll events unconditionally and rely on the
bound checks in StAdjustment.
https://bugzilla.gnome.org/show_bug.cgi?id=672413
Evolution now stores its selected calendars and tasks in GSettings, not
in GConf. If we don't look at the new location, then we'll not pick up
newly added and enabled calendars, making the calendar effectively not
work for new installs.
https://bugzilla.gnome.org/show_bug.cgi?id=673610
If evolution-data-server needs to prompt for a password, it will try
to pop up a GTK+ dialog. When GTK+ is not initialized, the result is
a crash. So, initialize GTK+ and run a main loop.
See https://bugzilla.redhat.com/show_bug.cgi?id=809681
The result is ugly since we have a Gnome-shell-calendar-server fallback
application, but I don't think it's worth installing a desktop file
and having a string break, since this is pretty uncommon (only for
manually added calendars without the password stored in gnome-keyring),
and apparently this is being rewritten for 3.5 to have the dialogs come
the e-d-s daemon rather than from the individual application.
https://bugzilla.gnome.org/show_bug.cgi?id=673608
gnome-shell-extension-prefs uses format(), but can't pull in Shell
(which is a dependency for the module), since that in turn would pull in
Meta. Fix this by moving the introspected int format function to ShellJS
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=673106
Icon theme change signals aren't noticed immediately, they're usually
noticed when trying to load an icon. Since icon theme changes cause a
style change, and most icon widgets try to re-load their texture during
a style change, this means that we get a stack like this:
st_texture_cache_load_icon
gtk_icon_theme_lookup_icon
gtk_icon_theme_changed
st_widget_style_changed
st_texture_cache_load_icon
Rather than making every place that uses StTextureCache re-entrant,
punt the notifying of icon theme changes to an idle handler instead.
https://bugzilla.gnome.org/show_bug.cgi?id=673512
We've been dangling on the edge of unsafety, unnoticed, for a little while
about the reference count safety of ShellScreenshot. GJS owns the entire
reference count, so as soon as it goes out of scope it could die, causing
GJS to try and fetch the corresponding wrapper object for a stale pointer.
We haven't seen any crashes because of luck -- SpiderMonkey tries to group
together deallocations to limit GC pauses, and there isn't really a lot
of GC pressure in the duration that a screenshot happens, so we tend to
be mostly stable. But in the case that you create a lot of objects while
a screenshot is going on, by hammering the "Print Screen" button, for
example, you can destroy the GObject before the callback finishes.
https://bugzilla.gnome.org/show_bug.cgi?id=672775
Currently compilation fails with -Werror, as we don't handle the
(newly introduced) smooth scroll events in switch statements; add
some basic support, which should make the compiler happy.
https://bugzilla.gnome.org/show_bug.cgi?id=672413
More than one outstanding request to the same URI should now be
deduplicated, and the framework is there if we want to cache async loaded
URIs as well
https://bugzilla.gnome.org/show_bug.cgi?id=672273
In the case that we don't have an icon corresponding to the gicon, it's
more than likely that the code calling load_gicon will know more about
what it wants as a fallback than the texture-cache itself. In fact -
we had a whole lot of dead code that would try to fall back, but never
did because we always returned a valid actor.
This was causing certain applications with invalid icons to not get the
fallback icon because an icon couldn't be found. Fix up the one place
where we don't have an explicit fallback icon codepath, and then stop
doing what we were doing.
https://bugzilla.gnome.org/show_bug.cgi?id=671656
This assignment was shadowed by the giant switch above. Since the
switch has a comment or two explaining the logic inside of it,
keep that instead of the assignment.
Since the invoker for navigate_focus has an extra parameter, annotations
from the invoker aren't applied on the vfunc itself. Fix that by annotating
the vfunc separately.
In the workspace-collecting code we add a check to avoid collecting a
workspace if any startup sequence is running there. Since the sequence
can take some time to load, an helper function is also added which keeps
the (empty) workspace around for a very short time, while waiting for the
sequence to start.
https://bugzilla.gnome.org/show_bug.cgi?id=664202
If the user was inactive while a notification was shown, we show the summary
when the user becomes active again. This ensures that we inform the user of
the existance of new notifications that the user might have missed.
When the user comes back from away, the summary is now only shown if it has
new notifications.
https://bugzilla.gnome.org/show_bug.cgi?id=643014
ECal is deprecated and replaced by ECalClient. This has the
advantage of using e_utils to handle authentication, and should
fix NotOpened errors (that affect in particular webcal calendars
prior to evolution running)
https://bugzilla.gnome.org/show_bug.cgi?id=671177
This allows us to do directional keyboard navigation when there's no
actor inside the horizontal or vertical strip extending from the
origin actor but there are other actors to the sides of that strip
that could still be used as targets even if that means the focus would
move diagonally.
https://bugzilla.gnome.org/show_bug.cgi?id=663901
For arrow keys navigation, when moving from a widget which isn't a
descendant of the widget we are going to, it's unexpected that focus
moves to the target's first descendant instead of the closest to the
source widget.
This requires us to use absolute coordinates to compare widgets since
we no longer have the guarantee that the widgets we are comparing are
siblings.
https://bugzilla.gnome.org/show_bug.cgi?id=663901
Our DBus API (and mostly every other API in existence) define an
area as the top-left corner and width/height; glReadPixels on the
other hand uses the bottom-left corner, so we have to transform the
coordinates before passing them to GL.
https://bugzilla.gnome.org/show_bug.cgi?id=670979
When porting from st_container_get_children_list to this code, I accidentally
broke StTable by a copy/paste error. This broke notifications that updated,
leaving them with what they think were 0 columns and 0 rows.
https://bugzilla.gnome.org/show_bug.cgi?id=670640
* Add a keyring prompter based on GcrSystemPrompter
* Adds dependency on gcr version 3.3.5 or higher
* Not yet using unmerged support for non-pageable memory
https://bugzilla.gnome.org/show_bug.cgi?id=652459
The very similar clutter_actor_allocate_align_fill is close enough
that this is just needless duplication. Additionally, allocate_fill
already inverts the align if the text direction is RTL, so we don't
need to do that here.
https://bugzilla.gnome.org/show_bug.cgi?id=670034
Now that StWidget is a group of sorts, it needs to account for its children
in its paint volume. Unfortunately, this causes havoc for StBoxLayout, so it
needs fixing - it's unknown why it worked when chaining up to near-identical
code in StContainer.
https://bugzilla.gnome.org/show_bug.cgi?id=670034
The get_focus_chain() implementation in StWidget just returns all
children, it should filter for visible children instead. This
breaks keyboard navigation in various places since commit 72dad591
removed the correct implementation in StContainer.
https://bugzilla.gnome.org/show_bug.cgi?id=670904
Now that ClutterActor has a ClutterContainer implementation, we
can start removing StContainer. To help make this a bit more
understandable, instead of converting everything at once, make
StContainer a compatible API wrapper around the ClutterActor
implementation, and then we'll remove those wrappers in later
commits.
https://bugzilla.gnome.org/show_bug.cgi?id=670034
Since an StWidget now has children, it needs to allocate those children
properly. Defer to the currently installed layout manager, like Clutter
does.
Now that we have something that allocates children in St, to prevent
double allocations, we use clutter_actor_set_allocation rather than
chaining up to StWidget::allocate.
https://bugzilla.gnome.org/show_bug.cgi?id=670034
Now that StWidget is concrete and instantiable, we need to do something
other than return an adjusted 0 for width and height. Just chain up
to ClutterActor's default implementation, which uses the layout manager.
https://bugzilla.gnome.org/show_bug.cgi?id=670034
Since we want to paint children by default in StWidget, we need to
provide a way for custom subclasses to paint their CSS backgrounds
without painting children... introducing st_widget_paint_background.
Additionally, remove any custom paint/pick handlers added by subclasses
of StWidget that just painted their children. This will cause double
painting if left alone.
This also removes the hacky things that some subclasses of StBin did
to prevent their one child to be painted by StBin.
https://bugzilla.gnome.org/show_bug.cgi?id=670034
Clutter now provides two new properties on ClutterActor - first-child
and last-child, so we have notifiers on when they change. Unfortunately,
it still doesn't help us too much - we need to keep track of the previous
values of the properties so we can remove their pseudoclasses.
https://bugzilla.gnome.org/show_bug.cgi?id=670034
We can't get rid of the implementations in StContainer just yet,
as StContainer still keeps its own child list. But this should
lower the amount of code that has to be moved around when we
remove StContainer.
https://bugzilla.gnome.org/show_bug.cgi?id=670034
clutter_container_foreach is deprecated, so let's replace that
with some ClutterActorIter usage. Additionally, remove the checks
for ClutterContainer, as all ClutterActors are now ClutterContainers.
https://bugzilla.gnome.org/show_bug.cgi?id=670034
Although not all "Finding and reminding" applications are ready
yet, the integration with gnome-documents' search results overlaps
enough with the "Recent Items" provider to justify its removal.
https://bugzilla.gnome.org/show_bug.cgi?id=670150
Empathy uses to support 2 D-Bus API for calls:
- StreamedMedia: legacy API
- Call.DRAFT: experimental version of the new API
Since 3.3.90, Empathy only supports Call1, the first stable version of the new
API, so the Shell should do the same.
https://bugzilla.gnome.org/show_bug.cgi?id=667694
The function may return FALSE without setting the GError, so don't
assume it is set to prevent a crash in that case. While at it, free
the GError we were leaking before.
https://bugzilla.gnome.org/show_bug.cgi?id=670418
When using systemd, polkit doesn't set the error even when returning false in g_initable_init
Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
https://bugzilla.gnome.org/show_bug.cgi?id=670319
The handle was a child of the trough, but it was allocated and painted
like it was a child of the bar. This will wreak havoc when we port over
to the new Clutter API, so let's just make it a child of the bar.
https://bugzilla.gnome.org/show_bug.cgi?id=670034
When the operation is cancelled by NetworkManager, the request is
cancelled immediately. Later when gnome-keyring invokes the callback
notifying the error we must therefore not access its memory.
Previously the callback would mistakenly treat "cancelled" (which
indicates a programmatic cancel) as "denied" (which means the user
clicked "Cancel" on the keyring prompt)
https://bugzilla.gnome.org/show_bug.cgi?id=658484
VPN secrets are stored by the plugins, that provide separate
helpers for authentication. This commit adds the support for invoking
the binaries and pass them connection details.
For plugins that support it (as exposed by their keyfile), we invoke
them in "external-ui-mode" and expect a set of metadata about the
secrets which is used to build a shell styled dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=658484
ConsoleKit is being obsoleted by systemd. Accordingly port the CK logic
in the gnome-shell automount manager to systemd-logind APIs.
This makes use of systemd-logind's native C APIs which are much easier
to use than the D-Bus APIs in this case, and much faster too (since they
are synchronous and directly query the kernel for the information we
need). The dependency is compile time optional, and in order to be nice
to the Debian folks g-s compiled with this enabled fill automatically
fall back to CK support on systems lacking systemd.
A new tool, 'gnome-shell-extension-prefs' can load a new entry point from
extensions, 'prefs.js', which has an entry point to return a GTK+ widget.
This allows extensions to have their own preferences dialog, without each
extension needing to ship its own Python script and .desktop file.
https://bugzilla.gnome.org/show_bug.cgi?id=668429
Clutter, since version 1.8, does The Right Thing™ inside the default
implementation of ClutterActor::map and ClutterActor::unmap, even for
non-container actors: it will iterate over the list of children and
map, or unmap, each one of them, respectively.
This means that the requirement to override map and unmap for composite
actors to map and unmap the internal children has been dropped.
https://bugzilla.gnome.org/show_bug.cgi?id=669239
Since our implementation of background-size is now CSS-compliant, we
do not need this subtexture hack that clips a "leak". The comment here
is also incorrect.
https://bugzilla.gnome.org/show_bug.cgi?id=633462
It seems that accidentally, two variables were swapped in one code path
of the background-size implementation, causing interesting but wrong
images for some elements.
https://bugzilla.gnome.org/show_bug.cgi?id=633462
Recent mutter changes made MetaShapedTexture not a ClutterTexture,
but instead a special ClutterActor subclass that implemented the texture-y
bits itself. Use recently introduced API in MetaShapedTexture so that we can
get the raw texture data and spit it out as a PNG.
Use the new meta_shaped_texture_get_image() to get a window's texture data.
meta_shaped_texture_get_image() flattens the image against any mask it may
have, so a screenshot of it should look exactly as it does on the display.
https://bugzilla.gnome.org/show_bug.cgi?id=662486
Instead of adding every rendered frame into the recording, drop frames
and only buffer and record enough frames to match the target framerate.
Increase the default frame rate from 15 to 30, since now that we're
actually enforcing framerate, it's noticeable that 15fps is not smooth.
https://bugzilla.gnome.org/show_bug.cgi?id=669066
The default pipeline was fairly aggressive about quality, and could
be too expensive for some computers. Decrease the quality setting for
the vp8 codec from 10 to 8, and increase the speed setting from 2 to 6.
(Basically, quality affects the visual fidelity of the end result, while
speed affects how much CPU the encoder uses to get a high compression
ratio at that quality level.)
Remove videorate from the pipeline, since the GStreamer VP8 encoder can
handle variable-framerate streams. This means that we won't spend CPU
encoding duplicate frames added by videorate.
https://bugzilla.gnome.org/show_bug.cgi?id=669066
We need to indicate that our GStreamer source produces timestamped
frames, instead of the default, which is to produce a stream of bytes.
This is needed for correctness, and to avoid warnings for some
pipelines.
https://bugzilla.gnome.org/show_bug.cgi?id=669066
For the Intel drivers, using glReadPixels() to read into client-memory
directly from the frame buffer is much slower than creating a pixel
buffer, copying into that, and then mapping that for reading. On other
drivers, the two approaches are likely to be similar in speed. Create
a ShellScreenGrabber abstraction that uses pixel buffers if available.
Use that for screenshots and screen recording.
https://bugzilla.gnome.org/show_bug.cgi?id=669065
Use the correct clip offsets when taking the screenshot of a window, to
exclude possible invisible borders and to include the case where the
window doesn't have any frame itself.
.desktop files have been designed for browsing, so the existing
fields often produce insufficient results when used for search.
gnome-control-center used X-GNOME-Keywords for that purpose, which
has now been standardized as Keywords. It makes sense for us to
support it in gnome-shell as well (and encourage its use outside
of settings panels).
https://bugzilla.gnome.org/show_bug.cgi?id=609702
It seems that Debian has their own prefixes in something like
debian-xterm.desktop. To properly do application matching in these cases,
we need to strip the debian- prefix.
https://bugzilla.gnome.org/show_bug.cgi?id=665647
Writting the screenshot to a file can take a relativly long time
in which we block the compositor, so do that part in a separate
thread to avoid the hang.
https://bugzilla.gnome.org/show_bug.cgi?id=652952
A new texture has undefined contents - when we're creating a shadow,
we need to clear the contents of the texture before drawing the border
and background into it.
https://bugzilla.gnome.org/show_bug.cgi?id=668048
g_dbus_method_invocation_return_value() adopts a floating reference,
so we don't also need to unreference it; fix by replacing the code
using a more compact form using the ^ convenience character in
GVariant type specifications. (Thanks to Ryan Lortie for the
suggestion.)
https://bugzilla.gnome.org/show_bug.cgi?id=667378
According to the GIO docs, sections can have labels too. We support
them by inserting a non reactive menu item at the beginning of the
section. This item is specially flagged to be ignored while processing
changed signals from the model (since it does not correspond to any
model item)
https://bugzilla.gnome.org/show_bug.cgi?id=666681
shell_embedded_window_hide() can be called during widget destruction,
after the associated ClutterActor has been already cleared out.
Fix a crash in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=633028
The application proxy is created asynchrously after the dbus name
is registed. This means that when tracking the first window (and
therefore creating the first window GActionGroup) there is no
app proxy yet.
https://bugzilla.gnome.org/show_bug.cgi?id=633028
Implement the background-size CSS property, specified by the CSS
Backgrounds and Borders Module Level 3, including the keywords
"contain", "cover", and fixed-size backgrounds.
https://bugzilla.gnome.org/show_bug.cgi?id=633462
It's not guaranteed that the application DBus proxy appears before
we receive the first focus event from the toplevel window.
Ensure that the first method to access the action muxer creates it if
hasn't been created yet.
We now have GRemoteActionGroup interface with the needed API,
implemented by GDBusActionGroup.
With the new API we could theoretically turn GActionMuxer itself into a
GRemoteActionGroup and expose the _full API to the shell so that the
timestamps could be passed from there.
Pass the current timestamp as platform data when activating
an action. This is implemented slightly hacky, since we use
clutter_get_current_event_time() to get at the timestamp, but
the alternative is to expose g_action_muxer_activate_action_full
to js, which would be quite a bit more involved.
GTK+ also exports window-specific actions, by putting the object path
for the exported action group in the _DBUS_OBJECT_PATH X property.
We add this action group to the app's muxer with a 'win' prefix,
since that is what the exported menu expects. Whenever the focus
window changes, we update the window-specific actions of its
application, and emit notify::action-group to cause the app
menu to be updated.
GDBusActionGroup api has changed again, adapt to that.
Also, use a GActionMuxer to add the 'app.' prefix to actions,
instead of manually stripping it out of the action names.
In the future, the muxer will also contain per-window actions
with a 'win.' prefix.
GMenuProxy has been replaced by GDBusMenuModel, and the object path
has been moved (now needs to be retrieved from the AppMenu GApplication
property).
Update the test to prefix each action with "app." as documented,
and use a GtkApplicationWindow instead of a plain GtkWindow.
Use the new GApplication support in ShellApp to create the application
menu. Supports plain (no state), boolean and double actions.
Includes a test application (as no other application uses GApplication
for actions)
https://bugzilla.gnome.org/show_bug.cgi?id=621203
GDBusActionGroup and GMenuProxy are new objects in GIO 2.32 that
help with accessing menus and actions of remote applications.
This patch makes it possible for the shell to associate an
application with a dbus name and from that a GMenu, that will
be shown as the application menu.
https://bugzilla.gnome.org/show_bug.cgi?id=621203
grid_width and grid_height were inverted, which caused a crash
in GdkPixbuf code. This was never noticed because the animation
in the panel is a square.
https://bugzilla.gnome.org/show_bug.cgi?id=666606
commit 5350302b09 dropped the possibility
to make a dbus name acquisition failure non-fatal.
Btw, it has also overriden the name in the error message.
Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
Signed-off-by: Colin Walters <walters@verbum.org>
https://bugzilla.gnome.org/show_bug.cgi?id=663941
Rewrite code acquiring dbus names so that it uses GDBus, and rewrite
ShellDBus so that it is exposed on the GDBus connection. Ports of
the other objects will follow.
https://bugzilla.gnome.org/show_bug.cgi?id=648651
Not all desktop files tracked by the shell have
Exec lines. This could be because they're actually
run by another process, for instance, and the desktop
file is merely there to provide metadata. For example,
nautilus-pastebin provides a desktop file without an
Exec line.
The shell currently crashes if one of these partial
desktop files is installed and the user attempts to
search from the overview.
commit 37726a4cb6 fixed
a similar crasher.
This commit fixes the next one lower in the code.
https://bugzilla.gnome.org/show_bug.cgi?id=663815
Instead of saving the last_used_time per-app, grab the maximum time for all
windows. The logic is less hard to keep track of, and it solves some edge
case issues where windows that no longer exist update the user time, even
if none of the other windows have been used recently.
https://bugzilla.gnome.org/show_bug.cgi?id=660650
Allow push_modal to optionally only work with a keyboard only grab and
use that in altTab as a fallback to allow switching windows while a pointer grab
is in effect (like during DND operations).
https://bugzilla.gnome.org/show_bug.cgi?id=660457
For some reason, the texture cache decides to make a request and then look up
an icon in the icon theme. If it's valid, it just returns, fine, but if it
doesn't add the icon, it tries to undo the request, leaking an
AsyncTextureLoadData that isn't freed in the process.
https://bugzilla.gnome.org/show_bug.cgi?id=660968
Rather than have five or six structs allocated duplicating data,
just keep one and simplify the code considerably.
Again, part of my ongoing quest to merge St and Mx.
https://bugzilla.gnome.org/show_bug.cgi?id=660968
shell_global_get_memory_info tries to zero initialize the output
parameter with memset, but it passes the wrong size (because of
a missing *). There's no reason to do the memset, though. In the
normal case all members of the struct gets initialized before the
function returns anyway.
This commit drops the memset call in favor of one explicit 0 assignment
that only gets executed on on atypical platforms.
https://bugzilla.gnome.org/show_bug.cgi?id=662236
Without the desktop, even Nautilus hardcodes "Home" in all places
nowadays (except for the desktop itself). I think a run-time dependency
on nautilus being installed (GSettings will abort if the schema is not
found) is not worth it to keep compatibility with the desktop.
(Also, nautilus itself could probably hardcode "Home" for the desktop as
well and remove the preference).
https://bugzilla.gnome.org/show_bug.cgi?id=659895
If we add a 0-sized actor with a border-radius, we will crash as we try to
allocate a 0-sized texture in Cogl. Bail out early instead of doing that.
https://bugzilla.gnome.org/show_bug.cgi?id=661617
We originally OR'ed search terms and favored results which matched
multiple times to get more relevant results. When changing search
to AND search terms, the semantics of "multiple matches" were
changed to refer to a single term matching multiple criteria (name,
executable), which seemed like a good idea at the time.
However in practice this just results in applications whose
user-visible name matches the executable name on disk being
favored over applications using a more generic name, which
isn't too useful (in particular when taking usage frequency
into account).
https://bugzilla.gnome.org/show_bug.cgi?id=623372
Currently we use a very strict definition of "prefix", where the
search term has to match at the very beginning of the searched
criteria (application name, executable name). Use a more liberal
definition by including matches where the preceding character is
a space (application name) or hyphen (executable name) as well;
as many applications use a prefix, this should improve the quality
of results.
https://bugzilla.gnome.org/show_bug.cgi?id=623372
Application search results are internally categorized in four sets,
multiple and single prefix matches and multiple and single substring
matches. Each set is currently sorted alphabetically by application
name when concatenating the sets to the final result.
Change the last step to sort each set by usage frequency instead,
which is more likely to favor the most relevant match than
"arbitrary" alphabetic order.
https://bugzilla.gnome.org/show_bug.cgi?id=623372
Require that all terms match. This is the expected behaviour
and matches what gnome-contacts does. Keep the prefix/infix
weights in place for now.
https://bugzilla.gnome.org/show_bug.cgi?id=660912
Folks uses collection/set objects from libgee to store email addresses
associated with an individual. Unfortunately to extract addresses, parts
of libgee which are unusable from (introspected) bindings have to be
used[0], so add a helper method.
[0] in particular gee_iterator_get(), which is annotated as
"return: (transfer full): gpointer"
https://bugzilla.gnome.org/show_bug.cgi?id=660580
Match folks' name and nick fields, in addition to alias,
and look at email addresses in addition to im addresses.
This is more in line with what gnome-contacts does.
To match this new usage, rename the ALIAS_..._WEIGHT and
IM_..._WEIGHT constants to NAME_ and ADDR_, respectively.
https://bugzilla.gnome.org/show_bug.cgi?id=660580
The translate coordinates are calculated as the offset after the scale, so it
needs to be applied after the scale as well. This fixes random centering issues
in the UI.
https://bugzilla.gnome.org/show_bug.cgi?id=660674
For GIcons we use g_icon_to_string() in the key, but the function
will return NULL if the icon cannot be serialized. As a result,
all non-serializable GIcons of the same size end up with the same
cache key - an example for this are contacts with avatars, which
currently all end up with the same image.
To fix, opt out of caching for GIcons which cannot be serialized.
https://bugzilla.gnome.org/show_bug.cgi?id=660585
Setting up the framebuffers for transitions may fail, in which case
the material used for drawing is left uninitialized, so trying to
access it results in a crash.
Instead bail out in this case, which means that we won't paint
anything during the transition - still, drawing errors are better
than crashes ...
https://bugzilla.gnome.org/show_bug.cgi?id=659676
While we allow for arbitrary modifiers in keybindings, both the
alt-tab and ctrl-alt-tab popups close when ALT is not present in
the modifier mask, resulting in ALT being de-facto hardcoded.
Instead, pass the actual modifier mask when invoking the popups.
https://bugzilla.gnome.org/show_bug.cgi?id=645200
VPN secrets are currently unhandled by the UI code. To avoid
lengthy timeouts, bail out early with an error, so NetworkManager
falls back to the nm-applet agent directly.
https://bugzilla.gnome.org/show_bug.cgi?id=658484
Commit 0af108211c introduced a
regression where applications that appear in multiple categories were
duplicated in the "All Apps" list, because we switched from
uniquifying on desktop file ID to the GMenuTreeEntry.
Switch back to keeping the set of apps based on ID. To flesh this
out, we keep the ShellApp instance for a given ID around forever, and
when we're loading new contents, we replace the GMenuTreeEntry inside
the app. That means callers still get new data.
We still keep around the running app list, though we could just
recompute it from the app list now.
https://bugzilla.gnome.org/show_bug.cgi?id=659351
The apps and settings loading code duplicated the part to traverse a
GMenuTree. Unify this by adding a new function to return a flattened
set.
This will also be useful for a future change to how we store apps -
this way we can look at both the current set of apps and the new set.
https://bugzilla.gnome.org/show_bug.cgi?id=659351
Instead of doing complex computations in the shader just pass in the correct
fade area (taking padding, scrollbars and rtl into account) and just work
with that in the shader.
That fixes a bug where we would fade the scrollbar when padding is present.
https://bugzilla.gnome.org/show_bug.cgi?id=659159
The way the window dimmer shader is applied will cause rendering errors with
the rounded corners, invisible borders or shaped textures since it doesn't deal
well with the multitexturing used by the MetaShapedTexture. Use an off-screen
buffer to flatten the texture before being applied.
https://bugzilla.gnome.org/show_bug.cgi?id=659302
While I've been trying to make the GC kick in more often, I've decided
it's a better tradeoff to aggressively GC at "leisure", for multiple
reasons.
We can and should revisit this at a later time, but basically:
* The shell doesn't generate *that* much JS data - garbage collection
is very fast here.
* Long periods without GC mean we're not calling free() when we
could, which in turn makes heap fragmentation much worse.
* Ensuring the GC runs at idle makes it much less likely we'll take
a random large GC hit in the middle of an animation.
https://bugzilla.gnome.org/show_bug.cgi?id=659254
It was always taking the first .service.in file to create all .service
files: org.gnome.Shell.CalendarServer.service.in was the only one being
used.
https://bugzilla.gnome.org/show_bug.cgi?id=659194
Base ShellStack on StContainer rather than ClutterGroup, so that it
has StWidget-y features (and so we don't have to "cheat" in
shell_stack_allocate()). Implement navigate_focus() to only ever pass
focus into the top-most child, since doing otherwise would be
surprising.
https://bugzilla.gnome.org/show_bug.cgi?id=646934
The translation is taken from GTK+, so translations in the gnome-shell
domain are pointless - hide the string, so that it is not extracted
by xgettext.
In particular, document that you can ignore the get-preferred-*
signals if and only if you have a fixed width/height specified by some
other means.
https://bugzilla.gnome.org/show_bug.cgi?id=657986
This patch fixes the "apps vanish from alt-TAB bug".
If a "package system" rips away and possibly replaces .desktop files
at some random time, we have historically used inotify to detect this
and reread state (in a racy way, but...). In GNOME 2, this was
generally not too problematic because the menu widget was totally
separate from the list of windows - and the data they operate on was
disjoint as well.
In GNOME 3 we unify these, and this creates architectural problems
because the windows are tied to the app.
What this patch tries to do is, when rereading the application state,
if we have a running application, we keep that app around instead of
making a new instance. This ensures we preserve any state such as the
set of open windows.
This requires moving the running state into ShellAppSystem. Adjust
callers as necessary, and while we're at it drop the unused "contexts"
stuff.
This is just a somewhat quick band-aid; a REAL fix would require us
having low-level control over application installation. As long as
we're on top of random broken tar+wget wrappers, it will be gross.
A slight future improvement to this patch would add an explicit
"merge" between the old and new data. I think probably we always keep
around the ShellApp corresponding to a given ID, but replace its
GMenuTreeEntry.
https://bugzilla.gnome.org/show_bug.cgi?id=657990
This adds contacts search to shell, powered by libfolks.
Changes:
- Add Folks and Gee to the build system
- ShellContactSystem, a backend in C
- ContactDisplay, search frontend in JS
https://bugzilla.gnome.org/show_bug.cgi?id=643018
This commit introduces a "session type" for
gnome-shell. It essentially defines what
mode of operation the shell runs in
(normal-in-a-users-session mode, or at-the-login-screen mode).
Note this commit only lays the groundwork. Actually
looking at the key and appropriately differentiating
the UI will happen in subsequent commits.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
shell_global_get() currently implicitly instantiates the shell
global singleton the first time it's called. This means there's
no opportunity to set construction-time properties on the singleton.
This isn't an issue yet, because there aren't any. We will need it
in the future, though, when we grow a --gdm-mode that gets exposed as
a property through the global singleton.
This commit adds a new _shell_global_init() function that must be
invoked before shell_global_get() can be called.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
StAdjustment has some non-functional and unused animation vestiges
like the "elastic" property, st_adjustment_interpolate() and
st_adjustment_clamp().
This commit vacuums that stuff up so it doesn't tempt anyone into
trying to use it.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
A network agent is a component that stores network secrets (like
wifi passwords) in the session keyring. This commit adds an
implementation of it to be used by the shell network dialogs. It
handles most of the keyring stuff, delegating the UI to upper layers.
https://bugzilla.gnome.org/show_bug.cgi?id=650244
Adds get_state() and ::state-changed signals, that replace connecting
and ready, as well as providing indication of when the object was closed
or the connection to PulseAudio failed.
https://bugzilla.gnome.org/show_bug.cgi?id=645708
During a state transition from running to not-running for
window-backend apps, it's possible we get a request for the icon.
Avoid asserting here and just return an empty image.
https://bugzilla.gnome.org/show_bug.cgi?id=656546
Adds methods to shell_global to allow taking screenshots
save the result into a specified png image.
It exposes three methods via shellDBus applications like
gnome-screenshot:
*) Screenshot (screenshots the whole screen)
*) ScreenshotWindow (screenshots the focused window)
*) ScreenshotArea (screenshots a specific area)
https://bugzilla.gnome.org/show_bug.cgi?id=652952
As danw points out,
"It's unique during the lifetime of the window, but reasonably likely to be
reused by another window after this one is destroyed. Using
meta_window_get_stable_sequence() might be better."
https://bugzilla.gnome.org/show_bug.cgi?id=648149
Since almost all of the callers of shell_app_activate were using the
default workspace (by passing -1), remove that parameter.
Add a new shell_app_activate_full() API which takes a workspace as
well as a timestamp; previously we might have been ignoring event
timestamps from elsewhere.
https://bugzilla.gnome.org/show_bug.cgi?id=648149
This dramatically thins down and sanitizes the application code.
The ShellAppSystem changes in a number of ways:
* Preferences are special cased more explicitly; they aren't apps,
they're shortcuts for an app), and we don't have many of them, so
don't need e.g. the optimizations in ShellAppSystem for searching.
* get_app() changes to lookup_app() and returns null if an app isn't
found. The semantics where it tried to find the .desktop file
if we didn't know about it were just broken; I am pretty sure no
caller needs this, and if they do we'll fix them.
* ShellAppSystem maintains two indexes on apps (by desktop file id
and by GMenuTreeEntry), but is no longer in the business of
dealing with GMenuTree as far as hierarchy and categories go. That
is moved up into js/ui/appDisplay.js. Actually, it flattens both
apps and settings.
Also, ShellWindowTracker is now the sole reference-owner for
window-backed apps. We still do the weird "window:0x1234beef" id
for these apps, but a reference is not stored in ShellAppSystem.
The js/ui/appDisplay.js code is rewritten, and sucks a lot less.
Variable names are clearer:
_apps -> _appIcons
_filterApp -> _visibleApps
_filters -> _categoryBox
Similarly for function names. We no longer call (for every app) a
recursive lookup in GMenuTree to see if it's in a particular section
on every category switch; it's all cached.
NOTE - this intentionally reverts the incremental loading code from
commit 7813c5b93f. It's fast enough
here without that.
https://bugzilla.gnome.org/show_bug.cgi?id=648149
Add a helper function (mostly copied from gtkcalendar.c) for getting
the first week day for the current locale, using nl_langinfo if
available and falling back to the GTK+ gettext fallback otherwise.
Use that function in the calendar, so that the LC_TIME setting is
used if possible.
https://bugzilla.gnome.org/show_bug.cgi?id=649078
If a container is not clip-to-allocation, then its get_paint_volume()
needs to include the paint volumes of all of its children, since they
(or their children) may paint outside the container's allocation.
Also, if the superclass get_paint_volume() returns FALSE, then the
subclass should return FALSE too.
https://bugzilla.gnome.org/show_bug.cgi?id=655812
MetaPlugin wraps a bunch of compositor (and plain metacity) methods
that we can just call ourselves, so just do that. (Presumably this
dates back to some ancient time when it was imagined that plugins
wouldn't need access to the full metacity API.)
https://bugzilla.gnome.org/show_bug.cgi?id=654639
Rather than constantly asking mutter for the MetaScreen, and then
figuring out the MetaDisplay/Display/etc from there, just keep track
of everything we care about inside ShellGlobal.
https://bugzilla.gnome.org/show_bug.cgi?id=654639
When porting to the new gnome-menus API in commit 8f3bdd4f1, the
initial loading of settings apps was left out, so settings panels
are neither found nor can be launched from the top panel menus.
The js modules have so many imports back and forth that it's pretty
much guaranteed that if you import even one of them, you'll end up
importing all of them, including ui.status.bluetooth and
ui.status.network. So fix up the typelib include paths the same way
gnome-shell-jhbuild does, so we can find everything.
https://bugzilla.gnome.org/show_bug.cgi?id=650298
Clutter 1.7.x introduced CLUTTER_CAIRO_FORMAT_ARGB32: which can be used when
sharing textures/data with cairo without having to do check the
byte order and choose the appropriate format by hand.
https://bugzilla.gnome.org/show_bug.cgi?id=654577
Update the sample to be more up to date with respect to Shell practices,
and make it look a bit prettier. Additionally, change the file extract
code so that it's easier to update and add new files later.
https://bugzilla.gnome.org/show_bug.cgi?id=653206
Ideally, this would be an entirely-JS implementation, but we have a
couple of issues with gjs and gobject-introspection to work around, so
we need a ShellMountOperation class for the time being.
This first commit implements the show-processes dialog, with a system
modal style very similar to the EndSession dialog.
Implementations of ask-question and ask-password will follow shortly.
https://bugzilla.gnome.org/show_bug.cgi?id=653520
The sniffer is a simple helper process, activated as a DBus service,
that tries to crawl as many files as possible in the provided target
directory (i.e. the new mount's root), for a maximum amount of time -
which is set here to 1.5 seconds (i.e. it will crawl either all the
files in the directory tree, or as many as it can before the specified
timeout expires).
Crawled files are ordered by their content type, and a generic estimation
of the type of files composing the directory is returned to the caller,
using generic 'x-content/*' mimetypes.
The process will then set an autoquit timeout on itself, which can be
disabled by setting the env variable HOTPLUG_SNIFFER_PERSIST for
debugging purposes. The HOTPLUG_SNIFFER_DEBUG env variable can also be
set to enable debugging output.
https://bugzilla.gnome.org/show_bug.cgi?id=653520
==17386== 1,669 (88 direct, 1,581 indirect) bytes in 1 blocks are definitely lost in loss record 4,090 of 4,151
==17386== at 0x4C24AF4: calloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==17386== by 0x691B099: g_malloc0 (in /usr/lib/libglib-2.0.so.0.2800.8)
==17386== by 0x692006A: g_option_context_new (in /usr/lib/libglib-2.0.so.0.2800.8)
==17386== by 0x5124C57: meta_get_option_context (in /usr/lib/libmutter.so.0.0.0)
==17386== by 0x401D4F: main (in /usr/bin/gnome-shell)
https://bugzilla.gnome.org/show_bug.cgi?id=654269
The gconf keys used to restore GNOME aren't in a proper GNOME3 environment.
To mimic what GNOME3 gnome-session does would be extremely complicated, so
just launch the system gnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=654527
The cogl path pads the corners out to the maximum corner radius to make the
math and painting logic easier. Unfortunately, when the radius exceeds the
actor's halfsize, the padding ends up interfering with other corners, creating
a big mess of rendering errors.
It'd be extremely complicated to fix this properly in the Cogl code,
so take the Cairo fallback.
https://bugzilla.gnome.org/show_bug.cgi?id=649513
Currently, any cases of overlapping corners were just ignored and rendered incorrectly.
Implement the corner overlap algorithm as specified by the W3C to fix this.
https://bugzilla.gnome.org/show_bug.cgi?id=649513
Unfortunately, gjs cannot handle binary C strings directly from
gobject-introspection. Add a simple workaround method in C to help
us save random files from the web.
https://bugzilla.gnome.org/show_bug.cgi?id=653989
Remove ShellGlobal's monitor-related methods, and have
Main.layoutManager provide that information instead. Move
Main._relayout() to LayoutManager, and have other objects connect to
the layout manager's 'monitors-changed' signal to know when the screen
geometry has changed.
https://bugzilla.gnome.org/show_bug.cgi?id=636963
shell_util_get_file_display_name_if_mount() uses a nautilus setting
to use a name for $HOME which is consistent with the file manager.
But while nautilus was ported to GSettings a while ago, we are still
trying to access the old GConf setting.
https://bugzilla.gnome.org/show_bug.cgi?id=653511
Only skip the areas of the scrollbars when they are invisible
and add take the horizontal scrollbar into account as well
when calculating the faded area.
https://bugzilla.gnome.org/show_bug.cgi?id=651866
jhbuild will default to srcdir != builddir in the future for various
reasons.
The enum generation rules were just broken and both did
cd $(srcdir) and $(addprefix $(srcdir)).
Also, remove an unnecessary $(addprefix) from the GIR sources; thanks
to Dan Winship for pointing out that make will look in both srcdir and
builddir, so it's not necessary to add a prefix explicitly. Doing so
breaks obviously when adding the sourcedir to a builddir file.
https://bugzilla.gnome.org/show_bug.cgi?id=653199
Using the list of stylesheets loaded with st_theme_load_stylesheet(),
one can build an StTheme that is completely identical to the previous
one, except for one property (application-stylesheet).
This allows rt and the user-theme extension to work while respecting
the theming of other extensions.
https://bugzilla.gnome.org/show_bug.cgi?id=650971
As the Shell does more than observing channels (users can interact with them),
it has to be an Handler as well. We have to make sure that all the new
incoming text channels are handled by the Shell by default, so we make it an
Approver as well.
From an user point of view, the only difference is that Empathy's tray icon
will stop blicking when receiving new channels.
We rely on ChannelDispatcher.DelegateChannels() and PresentChannel() to
interact with Empathy. Those methods have been implemented in
telepathy-mission-control 5.9.0 and telepathy-glib 0.15.0.
shell_global_get_memory_info() is a new function which extracts a few
global counters we have already, namely glibc's mallinfo, spidermonkey's
JSGC_BYTES, and gjs' counters for boxed/object/etc wrappers.
There is some slight overlap with perf; ultimately though I'd
like this function to do some more extensive analysis, so it wouldn't
be quite the same.
perf is going to be mainly concerned with how big the whole process
over time is; memory_info is for debugging memory leaks.
https://bugzilla.gnome.org/show_bug.cgi?id=650692
Theme authors now have the power (and responsibility) of creating fade
effects with the new CSS length property '-st-fade-offset'. A value of
0 disables the effect.
This new CSS approach replaces the current programmatic toggle of
the 'vfade' property. A new CSS style class name 'vfade' is used as
a replacement for the old property.
https://bugzilla.gnome.org/show_bug.cgi?id=651813
cogl_read_pixels() used to only support a useless pixel format, but it
will do our preferred format now, so use it rather than doing GL stuff
by hand.
https://bugzilla.gnome.org/show_bug.cgi?id=648758
Remove a workaround for clutter_actor_get_transformed_position() not
working inside paint(), and remove a comment about
ClutterText::position not being properly notified, since it is now.
(However, it doesn't seem worth it to rewrite the code to use
notification, since that would actually end up being more complicated
than the current solution.)
https://bugzilla.gnome.org/show_bug.cgi?id=648758
StScrollBar was tracking whether or not it currently had a valid
allocation, but since Clutter 1.4 there is a method it can call to get
that information instead.
https://bugzilla.gnome.org/show_bug.cgi?id=648758
A new envrionment variable GNOME_SHELL_ENABLE_CLEANUP is added which
causes us to attempt freeing global data. The reason this isn't
enabled by default is that it's a waste of time at best, and at
worst in corner cases could cause crashes which would fill up
crash databases. Better to leave it as a developer-only tool.
Start stubbing out some cleanup in ShellGlobal.
https://bugzilla.gnome.org/show_bug.cgi?id=649517
Move some more environment-initializationy stuff from main.js to
environment.js, and be more careful about not importing shell JS
modules until after the environment has been fully patched.
Change gnome-shell-plugin to call Environment.init() before
Main.start(); this means that Environment.init() now runs before any
shell JS modules (besides environment itself) have been imported.
Make run-js-test create a ShellGlobal and use its js_context, so that
the shell_global_set_property_mutable() stuff in Environment.init()
will work correctly in tests as well.
https://bugzilla.gnome.org/show_bug.cgi?id=649203
The tests were broken again, because since Shell-0.1.gir now has
'shared-library="libgnome-shell.so"', the references to Shell.PerfLog
ended up pulling in libgnome-shell in addition to the copy of
shell-perf-log.c that libjs-test was built with.
Fix all this hopefully forever by just making run-js-test link to
libgnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=649203
shell-global had become a dumping ground for functions that didn't
have anywhere else to be. Make shell-util the dumping ground instead,
and have shell-global only have methods that involve the ShellGlobal
object.
https://bugzilla.gnome.org/show_bug.cgi?id=648755
==13810== 11,360 bytes in 1 blocks are definitely lost in loss record 18,574 of 18,765
==13810== at 0x4005447: calloc (vg_replace_malloc.c:467)
==13810== by 0x5191882: standard_calloc (gmem.c:107)
==13810== by 0x51920A7: g_malloc0 (gmem.c:196)
==13810== by 0x4056201: blur_pixels (st-private.c:466)
==13810== by 0x40573B4: _st_create_shadow_cairo_pattern (st-private.c:710)
==13810== by 0x4070746: st_theme_node_paint (st-theme-node-drawing.c:856)
==13810== by 0x3FEFFFFF: ???
https://bugzilla.gnome.org/show_bug.cgi?id=649497
When activating an uninteresting window, the last_user_time isn't updated,
because we aren't tracking the window that the user_time gets updated on.
Hack around this by setting the last_user_time in shell_app_activate when
activating an uninteresting window.
https://bugzilla.gnome.org/show_bug.cgi?id=643302
When activating an uninteresting window, the last_user_time isn't updated,
because we aren't tracking the window that the user_time gets updated on.
Hack around this by setting the last_user_time in shell_app_activate when
activating an uninteresting window.
https://bugzilla.gnome.org/show_bug.cgi?id=643302
This property represents that the widget is being labelled by an
actor. The name is label-actor to avoid problems with the current
StButton:label and StTooltip:label
Before this change, we displayed dialogs on the monitor containing the
focused window if there was any, otherwise on monitor 0. We now use
the primary monitor rather than monitor 0 when no window has focus.
https://bugzilla.gnome.org/show_bug.cgi?id=648305
I unintentionally made .desktop->pid association "win" over
WM_CLASS. Fixing this makes the case of ancillary .desktop file
entry points (e.g. gnome-control-center's various shortcut .desktop
files) correctly show System Settings, and not whatever the shortcut
is.
In the future I'd like to have a way to say "this .desktop file
is a shortcut, ignore me" or something.
https://bugzilla.gnome.org/show_bug.cgi?id=646689
We weren't specifying _ALLOW_REPLACEMENT for anything except
org.gnome.Shell, which created a race - if the exiting process
didn't exit fast enough, the replacing process would fail
to get the name.
https://bugzilla.gnome.org/show_bug.cgi?id=646257
As a side effect of (see bug 642221), we no longer put docks or
transient windows into the hash table mapping windows to apps. The
"focused application" code relied on at least transients being in
there.
Fix this by calling the public API to map a window to an app, which
will at least follow transients. Whether we also want further
matching here (e.g. with window grouping) is another issue, but that
can happen as a different bug.
https://bugzilla.gnome.org/show_bug.cgi?id=647082
If a caller sets an StLabel's text to what it already is (as, eg, the
clock menu does), do nothing. Unless the label is editable, in which
case, setting the text has a visible side effect (dropping the
selection), so we don't optimize that out.
https://bugzilla.gnome.org/show_bug.cgi?id=645648
Add an uninstall-hook to undo the effect of install-exec-hook, and add
an $(AM_V_GEN) to the rule that copies either gnome-shell-real or
gnome-shell-jhbuild to gnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=646730
If we're unmapped (or destroyed) during a scroll, we want to clean
up the changes we've made to Clutter's event handling, remove our
signal handler, and emit ::scroll-stop.
https://bugzilla.gnome.org/show_bug.cgi?id=646825
Adding correct annotations to Gio.File.load_contents revealed that gjs
doesn't actually support array+length combinations. For 3.0 this would
be invasive to fix, so add a method to ShellGlobal which does what
we need.
https://bugzilla.gnome.org/show_bug.cgi?id=646333
Add a function that gets the current allocation of an actor
transformed into stage coordinates. This avoids a misfeature of
clutter_actor_get_transformed_size() where when a size request is
queued (even if it won't eventually change the size), the returned
value is the transformed size request rather than the last allocation.
https://bugzilla.gnome.org/show_bug.cgi?id=645744
settings.menu was removed in gnome-menus commit
b68bcd27f44ce2c494f6e3cd9695890b9c02af04; gnomecc.menu is the intended
replacement.
(On Red Hat Linux derived systems, settings.menu continues to exist)
https://bugzilla.gnome.org/show_bug.cgi?id=645063
Previously (because I suck) we were ignoring the return value of
RequestName, and so we'd totally ignore the fact that we failed
to acquire the DBus name.
Make this consistent by using meta_get_replace_current_wm() and
if we're in --replace, actually replace immediately.
https://bugzilla.gnome.org/show_bug.cgi?id=645593
The next draft of the CSS Backgrounds and Borders module will actually
define when the blur radius means. Fix our code to use that definition
(2 * standard deviation) rather than using the 1.9 * that we extracted
from what Mozilla was doing.
https://bugzilla.gnome.org/show_bug.cgi?id=632506
Some functions in StTextureCache enforce square ClutterTextures,
even in cases where the underlying CoglTexture has a different
width:height ratio.
Add padding in those cases to keep the resulting image from being
stretched.
https://bugzilla.gnome.org/show_bug.cgi?id=643866
If, for example, the stage is divided into multiple monitors, we
might want to constrain tooltips so they don't cross monitor boundaries.
Add a function to set a per-stage callback to constrain tooltips.
https://bugzilla.gnome.org/show_bug.cgi?id=645547
Instead of showing tooltips immediately on hover, wait until a timeout
after the last motion (timeout is given by the gtk-tooltip-timeout
GtkSetting.)
https://bugzilla.gnome.org/show_bug.cgi?id=642871
Use ClutterContainer functions for adding the tooltip instead of
calling clutter_actor_set_parent behind the stage's back, and do
it inside st_widget_show_tooltip (which is a normal method) instead
of overriding st_tooltip_show, which is a vfunc and it is called
internally by Clutter, therefore it is limited in what it can safely
do.
Also, instead of positioning the tooltip with clutter_actor_set_position,
modify the anchor point when the associated widget moves, so that
only a redraw is queued.
https://bugzilla.gnome.org/show_bug.cgi?id=635100
Inside the Shell, all the UI (including chrome, the overview, and
the actual windows) is not a child of the stage but of a special
ClutterGroup, which is cloned inside the magnifier.
Add function for setting this special actor so that actors added by
St are visible in the magnifier. Nothing yet uses this, but the
tooltip will soon.
https://bugzilla.gnome.org/show_bug.cgi?id=635100
As of commit 34ce17c4b3, search results use large icons, or thumbnails
when available. To keep the amount of upscaling for the latter as small
as possible, request a large thumbnail size.
https://bugzilla.gnome.org/show_bug.cgi?id=645493
If you have XFixes 5 (and corresponding xserver support) then we
add barriers on the panel and in the message tray corner so that
its easy to reach the corners even when there are monitors to the
sides of the primary monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=622655
If the pointer moves on or off the stage while another process has a
grab, we will lose track of it. One example of this is that if you use
a popup menu from a message tray trayicon, the tray will stay up after
the menu goes away, because the shell never saw the pointer leave it.
Add a new method shell_global_sync_pointer() that causes clutter to
recheck what actor is under the pointer and generate leave/enter
events if appropriate.
Of course, we can't actually tell for sure when another process has a
grab, so we need a heuristic of when to call this. Currently we call
it from Chrome._windowsRestacked(), which is not really the right
thing at all, but does fix the menu-from-trayicon case...
https://bugzilla.gnome.org/show_bug.cgi?id=630842
If the user clicks on the title of a trayicon's SummaryItem, forward
that click to the trayicon. Also adjust
gnome_shell_plugin_xevent_filter() so that if the trayicon takes a
grab as a result of this, we don't hide the message tray.
https://bugzilla.gnome.org/show_bug.cgi?id=630842
StButton was mistakenly considering any Space/Enter KEY_RELEASE to be
a click, when in fact it should only count as a click if it also got
the corresponding KEY_PRESS as well. This meant that when typing in a
chat notification, any Space/Enter keypress would dismiss the
notification, since the StEntry would take the PRESS event but ignore
the RELEASE, allowing it to propagate to the notification itself,
which would treat it as a click.
https://bugzilla.gnome.org/show_bug.cgi?id=645243
Alt+F2 restart was failing after a rebuild when running from the
source tree because it would try to restart
".libs/lt-gnome-shell-real", which didn't exist yet. Fix this by using
"libtool --mode=execute" at build time to regenerate that file.
https://bugzilla.gnome.org/show_bug.cgi?id=645390
In commit 9bd22dc0, I introduced an API to load an arbitrary
.desktop file, not necessarily from the menu path. It turns
out this function was broken because it created ShellApp instances
that were *different* from ones that were cached normally.
As far as I can tell, we didn't initially use it. Then later
Util.spawnDesktop was created which used this function.
Remove this broken function and all callers; if we're loading
.desktop files from *outside* the menu path, we can look at
readding.
This patch also kills off Util.spawnDesktop in favor of callers
talking to ShellAppSystem directly, now that the latter reports
errors.
https://bugzilla.gnome.org/show_bug.cgi?id=644402
Move the "system notification error" handling out of
util.js, and add it to ShellGlobal so we can start
calling it from across the codebase better (including
C).
https://bugzilla.gnome.org/show_bug.cgi?id=644402
When jhbuilding, we use a jhbuilt gobject-introspection, so the
default typelib path is the jhbuild prefix, not /usr. So if we are
using NetworkManager from packages, we need to adjust GI_TYPELIB_PATH
to include it.
https://bugzilla.gnome.org/show_bug.cgi?id=621707
Adds an implementation of nm-applet in javascript. Uses the new
introspection from NetworkManager, and temporarily requires
nm-applet to be running for the secret service.
Features a renewed interface, with each device controllable through
a switch, which if toggled off disconnects, and if toggled on
connects to the most recently used valid connection. More esoteric
features like creation of ad-hoc networks have been moved to the
control center panel.
https://bugzilla.gnome.org/show_bug.cgi?id=621707
gdm_user_get_real_name() checks for an empty real
name and automatically falls back to username if
real name is NULL. It doesn't automatically fall
back to username if real name is empty, however.
This commit makes it fall back for both cases.
https://bugzilla.gnome.org/show_bug.cgi?id=644765
When we compare the boxes for two actors, they may appear to overlap
by a small amount because of floating-point imprecision. Allow for
up to 0.1 pixel overlap when determining what children are in the
focus direction from the currently focused actor.
https://bugzilla.gnome.org/show_bug.cgi?id=644134
If a process does not have any "interesting" windows, then it can't be
considered a running app. (Previously we were calling
get_app_for_window() before ruling out non-interesting windows, which
ended up calling _shell_app_new_for_window(), which would add the
window to the ShellApp directly, bypassing the is_interesting check.)
https://bugzilla.gnome.org/show_bug.cgi?id=642221
This is another workaround for the lack of gjs supporting array
arguments, this time wrapping tp_connection_upgrade_contacts to
add new features to the connection's self contact.
https://bugzilla.gnome.org/show_bug.cgi?id=642793
Monkey-patch Date.prototype.toLocaleFormat() with a version that uses
g_date_time_format() since the Spidermonkey built-in can't handle
format strings with Unicode characters.
https://bugzilla.gnome.org/show_bug.cgi?id=643350
clutter_init() fails under normal circumstances like
being unable to open a display connection, so it shouldn't
be handled with g_error() producing a core dump.
Clutter consistently produces an error message when
clutter_init() fails, so we don't need to print out any
error message.
https://bugzilla.gnome.org/show_bug.cgi?id=643910
The number instructions in a shader is limited to 64 on r300 hardware,
the fade shader in StScrollViewFade was ending up using 97 instructions
which is way over the limit.
So refactor the shader to use less instructions by precomputing as many
values as possible outside of the conditionals. The resulting shader
ends up using 34 instructions which is well within the hardware limits.
https://bugzilla.gnome.org/show_bug.cgi?id=644589
GThemedIcon expects the first name to be the most specific, and
will thus prefer it to later ones. We thus need to order the names
from the longer to the shorter.
https://bugzilla.gnome.org/show_bug.cgi?id=621707
* Run gnome-shell-perf-helper during performance tests
* Use MUTTER_WM_CLASS_FILTER to omit all other windows
* Add new Scripting methods: createTestWindow,
waitTestWindows, destroyTestWindows
* Create a single 640x480 test window for testing overview
animation performance.
https://bugzilla.gnome.org/show_bug.cgi?id=644265
We need to connect to the NameOwnerChanged signal before we execute the
DConf binary. Refactor things so that we connect to the signal when
we first get the bus object. Split the code for waiting for a D-Bus
name into a wait_for_dbus_name() function for latter reuse.
https://bugzilla.gnome.org/show_bug.cgi?id=644265
When navigating from a non-immediate descendant of a container, we
were attempting to use clutter_actor_get_transformed_position() to get
the exact position of that actor relative to the container, but this
did not really make sense, since we would be using the position of
the intermediate container when navigating back.
https://bugzilla.gnome.org/show_bug.cgi?id=644134
g_themed_icon_new_with_default_fallbacks() does not do what we want
with symbolic icons; if the user's icon theme is not "gnome", then it
will end up preferring a non-symbolic icon from the higher-level theme
over a symbolic icon from gnome-icon-theme-symbolic.
If the shell requests a symbolic icon, and there is only a
non-symbolic icon available, that should be considered a programmer
error, just like requesting a non-existent icon name. So change the
code to only look up "-symbolic" names when drawing an
ST_ICON_SYMBOLIC icon.
https://bugzilla.gnome.org/show_bug.cgi?id=644142
* calendar-server subdirectory of build directory needs to
be created.
* Generate shell-enum-types.c/.h in build directory rather than
in the possibly-read-only source directory.
Build gnome-shell as a binary linked against libmutter-wm, instead of
a module to be loaded by libmutter-wm. Move the majority of
initialization-type stuff from gnome_shell_plugin_start() into main().
We still build libgnome-shell as a shared library, so that the linker
doesn't discard all the methods that are never called from C.
https://bugzilla.gnome.org/show_bug.cgi?id=641724
Add Ctrl-Alt-Tab support to ViewTab, and fix the Applications pane to
scroll to track the keyboard focus.
The Windows pane can be switched to, but navigation within the pane is
not yet implemented.
https://bugzilla.gnome.org/show_bug.cgi?id=618887
PopupMenuManager was pretending that it knew nothing about the menu's
sourceActors, while also trying to handle keynav between them. This
was a big mess, and resulted in bugs in navigation between panel menus
and the Activities button, and it totally gets in the way when trying
to add keynav to the dash (whose menu sources are arranged vertically
rather than horizontally).
Fix this up by moving the panel-specific parts to PanelMenuButton
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=641253
At times, RTL locales require different CSS, so always create theme
nodes with :ltr/:rtl pseudo classes depending on the widget's text
direction, to provide an easy way to handle those cases without
requiring a separate stylesheet.
https://bugzilla.gnome.org/show_bug.cgi?id=643835
Instead of defining rules manually, use the included make support,
which means Makefiles are less prone to API changes, support
verbosity correctly (instead of inconsistently hardcoding --quiet),
are cleaner to read, and emit GISCAN/GICOMP instead of GEN (which
is nicer).
https://bugzilla.gnome.org/show_bug.cgi?id=643371
The current gnome-shell.in script has a huge amount of
unnecessary complexity for the installed, normal case. Fix
this by adding a configure option (defaulting to false) that
installs a simple, obvious wrapper script around mutter.
We do change the gnome-shell build setup to pass this option
by default for jhbuild.
https://bugzilla.gnome.org/show_bug.cgi?id=642084
Unfortunately the evolution-data-server client-side libraries seem to
block the calling thread. This is a major problem as we must never
ever block the main thread (doing so causes animations to flicker
etc.). In the worst case, this problem causes login to hang (without
falling back to fall-back mode) and in the best case it slows down
login until a network connection is acquired.
Additionally, in order to sanely use these evolution-data-server
libraries, GConf has to be involved and GConf is not thread-safe. So
it's not really feasible just moving the code to a separate
thread. Therefore, move all calendar IO out of process and use a
simple (and private) D-Bus interface for the shell to communicate with
the out-of-process helper.
For simplification, remove existing in-process code since internal
interfaces have been slightly revised. This means that the shell is no
longer using any native code for drawing the calendar dropdown.
https://bugzilla.gnome.org/show_bug.cgi?id=641396
Signed-off-by: David Zeuthen <davidz@redhat.com>
See commit f2158218bef0c51 in mutter. Basically, we need
to grab org.freedesktop.Notifications before anything else
in the session gets started.
Note: I intentionally removed the Util.killall bits. I believe that
for notification-daemon at least, if we specify
DBUS_NAME_FLAG_REPLACE_EXISTING, we'll take over the name. Not sure
about notify-osd; if that's still a problem, then what we need to do
is add killing (and possibly respawning) of notify-osd to
"gnome-shell --replace", and not have it embedded randomly in a JS file.
https://bugzilla.gnome.org/show_bug.cgi?id=642666
gs-applications was introduced because we initially wanted a limited set
of categories, but this has now changed and we're back to categories
similar to the ones in the applications.menu from gnome-menus.
We can fix gnome-menus to have better categories, if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=641148
The vertical scrollbar is located on the left in RTL locales, so
pass an additional parameter to the shader which indicates the
locale's text direction.
https://bugzilla.gnome.org/show_bug.cgi?id=643156
In RTL locales, the vertical scrollbar should be located on the
left, so take the widget's text direction into account when
allocating the view's elements.
https://bugzilla.gnome.org/show_bug.cgi?id=643156
This allows PolicyKit applications to disambiguate between when the
authentication dialog is dismissed versus when authentication fails
(e.g. the wrong password has been entered).
See https://bugs.freedesktop.org/show_bug.cgi?id=30653 for more
information.
Signed-off-by: David Zeuthen <davidz@redhat.com>
A PolicyKit Authentication Agent is a construct used to authenticate
one or more identities. See the PolicyKit documentation for more
details on authentication agents and how PolicyKit works:
http://hal.freedesktop.org/docs/polkit/
Since gjs does not support subclassing a GObject class from Javascript
code, we bring in a native class to bridge the VFuncs to GObject
signals. Additionally, this native class also queues up authentication
requests so the user of the native class only has to deal with a
single outstanding request at any one time.
The file js/ui/polkitAuthenticationAgent.js introduces a singleton
that listens for authentication requests via the native class. This
singleton uses the PolkitAgent machinery to do the actual heavy-weight
lifting required for authentication (essentially a PAM conversation).
We currently don't allow the user to pick the identity to be
authenticated.
https://bugzilla.gnome.org/show_bug.cgi?id=642886
Signed-off-by: David Zeuthen <davidz@redhat.com>
When retrieving a ShellApp from the GHashTable of child processes,
we need to take an extra reference, that the GHashTable of windows
to apps will own.
Also add some documentation to avoid repeating this bug in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=642699
Using clutter_get_current_event_time can result into too old timestamps
when there is no current Clutter or Mutter event, since
clutter_get_current_event_time() returns the timestamp of the last event
delivered to Clutter. This can result in, for example, grabs failing. Use
the event time of the current event (if any) and CurrentTime otherwise.
https://bugzilla.gnome.org/show_bug.cgi?id=642188
Currently an entry's primary/secondary icon can only be set by
filename. In order to allow using themed icons, add API to set
a generic ClutterActor as icon.
https://bugzilla.gnome.org/show_bug.cgi?id=642333
For historical reasons, StEntry always did hover tracking when you had
visible hint_text, even if track_hover was FALSE. Remove that special
case, and make entries track hover just like all other widgets do.
If we actually needed to distinguish hovered-with-hint-text from
hovered-without-hint-text (which, at the moment, we don't), we could
do that by setting separate CSS for :hover and :hover:indeterminate.
https://bugzilla.gnome.org/show_bug.cgi?id=642483
Add the machinery to cancel the notification when a new playing a
new one (wrapping ca_context_cancel), then use it when scrolling
the status icon.
Not doing it for the slider because it causes noise, either with the
keyboard, with mouse drag or with mouse wheel.
https://bugzilla.gnome.org/show_bug.cgi?id=633667
If we aren't going to fill the content area of the node with a solid
background color, then we need to clear it of any artifacts left over
from drawing the border.
https://bugzilla.gnome.org/show_bug.cgi?id=640465
This reverts commit b4ec342d06.
The alpha > 0 checks should actually be alpha < 255 for the commit to
make sense as designed. The design isn't right either, though,
since we need to preserve the translucency in translucent gradients,
not block it with a solid color fill.
https://bugzilla.gnome.org/show_bug.cgi?id=640465
If a background gradient isn't fully opaque, then we need to first
fill in the background color so the border color doesn't leak into
the interior.
https://bugzilla.gnome.org/show_bug.cgi?id=640465
We need to be careful to ignore any preexisting color information
in the interior of the node when filling it with the background color,
since the border color may have leaked into the interior and the
background color may be translucent.
https://bugzilla.gnome.org/show_bug.cgi?id=640465
Some recent painting-efficiency fix broke the inspector, which
accidentally depended on things getting repainted too often, and so
was failing to highlight things properly now. A simple queue_redraw()
fixes this, but while I was there, I decided to port the drawing hook
to JS as well, since all the necessary parts of cogl work fine from
JS.
https://bugzilla.gnome.org/show_bug.cgi?id=642058
Built-in Xephyr support was an important debugging/development feature
for a while, but it is no longer especially useful (and has been
mostly broken since Clutter 1.4 anyway).
https://bugzilla.gnome.org/show_bug.cgi?id=610818
Point the arrow to the center of the sourceActor's content box, rather
than its allocation, in case it has asymmetric padding (as the
rightmost message tray summary item does).
https://bugzilla.gnome.org/show_bug.cgi?id=641728
With workspace thumbnails, we don't switch workspaces when dragging windows
between workspaces or adding new workspaces, so we also shouldn't switch
on launch.
* Add workspace parameters to shell_doc_system_open(),
shell_app_activate, shell_app_open_new_window()
* Pass a 'params' object when activating items in the overview with
two currently defined parameters: workspace and timestamp. (timestamp
is only implemented where it is easy and doesn't require interface
changes - using the global current timestamp for the shell is almost
always right or at least good enough.)
https://bugzilla.gnome.org/show_bug.cgi?id=640996
Launch child processes more directly; we retrieve the PID, and
use it to keep track of the .desktop file we launched.
Now, when we get a window, since the X window has a PID, we
have a pretty strong association.
.desktop file <-> PID <-> window
And can thus map window back to .desktop file.
https://bugzilla.gnome.org/show_bug.cgi?id=637745
For historical reasons, we had both StClickable and StButton, which
were nearly identical. StButton was more widely-used, so keep that and
port all StClickable users to that.
https://bugzilla.gnome.org/show_bug.cgi?id=640583
The material of prerendered backgrounds is now painted in the
rectangle determined by st_theme_node_get_paint_box(). As the
ClutterActorBox returned from that function includes the space
needed to draw the box shadow, the background ends up occluding
the shadow.
As the box shadow is not part of the background, factor out a new
helper function which excludes the box shadow, and use it to
prerender and place the background material.
https://bugzilla.gnome.org/show_bug.cgi?id=641522
1. Both functions leaked the nodes in priv->children
2. st_container_remove_all wasn't properly updating first_child and last_child
3. remove_all() is almost never right since it won't cause signal handlers
on the children to be removed. In the rare cases where it might be needed
the caller can simply use clutter_container_remove().
https://bugzilla.gnome.org/show_bug.cgi?id=640781
Due to recent GTK+ changes X11 specific code was moved into different
headers. As Socket/Plug is X11 only this broke our calls to GtkSocket
in the tray code. Fix this by including the new gtkx.h header.
Previously, trying to use a background image and border on
the same node resulted in the background drawing over the border.
This commit adds support for background images to
st_theme_node_render_background_with_border
and changes the code to call that function when appropriate.
https://bugzilla.gnome.org/show_bug.cgi?id=636976
Loading a pixbuf in a way that cairo can use it is a
pretty involved process that involves a lot of code, and pixel
fiddling.
This commit adds the mechanism to StTextureCache so we can reuse
the existing pixbuf handling code there, and also get caching.
https://bugzilla.gnome.org/show_bug.cgi?id=636976
A lot of the border drawing logic in st_theme_node_render_gradient is
applicable to other non-solid background types than gradients.
This commit refactors that code so that support for other non-solid
background types can be more easily integrated later.
https://bugzilla.gnome.org/show_bug.cgi?id=636976
When drawing the background image shadow, we need to clip it
to the node's background color, gradient, or borders if present.
If the background color is transparent, and there aren't any
borders, then we don't clip the shadow since there is nothing
to confine it.
https://bugzilla.gnome.org/show_bug.cgi?id=636976
The border_texture (and border_material) variable is being
overloaded for two purposes: it's used as a source
to 9-slice the border from, and it's used as place to prerender
the background and border together for gradients.
While we only do one or the other for any given node, the two cases
are distinct, and should use distinct variables for readability.
https://bugzilla.gnome.org/show_bug.cgi?id=636976
Currently, "-st-shadow" can mean one of three very
different things:
1) shadow based on alpha of the background image
2) shadow the "border box" of the node
3) shadow applied to the content of a StIcon
It isn't well defined which of the above 3 cases
-st-shadow will mean for any given node, however.
This commit splits the property into three
different properties, "box-shadow",
"-st-background-image-shadow", and "icon-shadow"
to make it all very explicit.
https://bugzilla.gnome.org/show_bug.cgi?id=636976
The vp8 codec provides better performance in pretty much all cases compared
to theora while still being free (as in not patent encumbered).
Also add a %T placeholder to the pipeline string which will be replaced
with the a thread count based on the target system.
https://bugzilla.gnome.org/show_bug.cgi?id=632595
StWidget reports a paint volume large enough to paint the current
theme node. As CSS transitions also paint the previous theme node,
the reported paint volume may be incorrect, resulting in screen
artifacts when painting outside the reported volume.
Add st_theme_node_transition_get_paint_box() to calculate an allocation
large enough to paint both theme nodes, and use it to report the correct
paint volume during transitions.
https://bugzilla.gnome.org/show_bug.cgi?id=640085
Right now is just redefine atk_object_get_name.
If someone wonders why not implement AtkText interface, or expose the
internal ClutterText, here a extract from AtkText doc:
"AtkText should be implemented by AtkObjects on behalf of widgets that
have text content which is either attributed or otherwise
non-trivial. AtkObjects whose text content is simple, unattributed,
and very brief may expose that content via atk_object_get_name
instead;"
StLabel is attributed, but is still simple and brief. In the same way
the atk_object_get_name redefinition is required, so this patch is the
first step. We can implement AtkText in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=626658
It includes:
* Expose a proper focusable state, instead of the default one from
cally, using StWidget::can_focus, and also notifying the state change
* Management of the selected stated, using the current pseudo_class.
* Defines a new virtual method on StWidget: get_accessible_type. In
this way it is not required to reimplement get_accessible just for
a accessible type change. get_accessible is reimplemented using this.
You can see that as a substitute of the atk object factory
https://bugzilla.gnome.org/show_bug.cgi?id=636716
This basically:
* Checks a11y configuration properties
* Checks if clutter has a11y enabled
* Loads atk-bridge
It also ensure proper NO_GAIL and NO_AT_BRIDGE values on gnome-shell
startup script
https://bugzilla.gnome.org/show_bug.cgi?id=612599
Instead of converting a CSS-specified length to an integer by truncation,
round. This means that sizes specified by converting a pixel value into
non-px terms will work reliably instead of potentially being off-by-one.
When changing a child's visibility with skip_paint(), the change
will not be visible until a redraw is triggered. Queue a redraw,
so that the function has an immediate effect.
https://bugzilla.gnome.org/show_bug.cgi?id=639461
If a starting-up app has not requested a particular workspace, then
shell_app_is_on_workspace() should return TRUE for any workspace.
Otherwise we will never get startup notification for them, since the
app menu only shows apps that are starting on the current workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=635089
With IBus, key events sometimes get sent to the server than
redelivered via gdk_event_put(). Since we expect all key events to
be delivered via the GDK event filter Mutter installs, this results
in key input not working.
To fix this, install an event handler with gdk_event_handler_set()
to intercept events being set from GDK to GTK+, pull out the
key events and send them back to Clutter.
Partially based on a patch by Daiki Ueno
https://bugzilla.gnome.org/show_bug.cgi?id=621659
Require that all extensions have a "shell-version" property in their
metadata, which is an array of supported Shell versions.
Extensions can target a specific version triple or an entire stable
version.
Optionally, they can also require a specific GJS version, to ensure
compatibility.
https://bugzilla.gnome.org/show_bug.cgi?id=639255
Synchronizing the actor and window position on paint resulted in lots
of syncing, and also resulted in the window mistakenly being left at
0,0 if the actor wasn't visible when the window first mapped.
Revert back to the old way of doing it, by tying into
clutter_actor_allocate, which was only failing before because of a bug
elsewhere.
https://bugzilla.gnome.org/show_bug.cgi?id=635695
The gnome-panel allows the user to hover over a tasklist entry
while draging to activate a minimized or obscured window and drop onto it.
Implement a similar behaviour by allowing draging to the activities button or
the hotcorner (and thus opening the overview), which allows the user to
activate any window (even on different workspaces) as a drop target.
https://bugzilla.gnome.org/show_bug.cgi?id=601731
A key for 12hr/24hr clock format has been added to gsettings-desktop-schemas,
so use that instead of the one from the shell clock schema.
As the setting can be controlled from the Date and Time panel of
gnome-control-center now, drop the temporary preference dialog
as well.
https://bugzilla.gnome.org/show_bug.cgi?id=633200
Use the same approach as other generated headers (a temporary file,
compare to the existing, then copy), to avoid touching st.h, so
that other dependent objects are not rebuilt, if not needed.
It should speed up building when switching git branches, as often
config.status or automake are run, causing Makefiles to be recreated.
https://bugzilla.gnome.org/show_bug.cgi?id=638453
Thanks Owen and Colin for debugging this:
<davidz> does anyone have a clue about this cryptic error message: http://fpaste.org/aWgh/ ?
<owen> davidz: well, I'd guess some sort of syntax error...
<walters> hmm
possibly but unlikely fallout from my js versioning
<owen> oh, it's happening here too
walters: exactly
Adding --js-version=1.8 to the wrapper script fixes
walters: I thought you were defaulting to allowing extensions?
<walters> actually, let's do that now anyways
Signed-off-by: David Zeuthen <davidz@redhat.com>
We weren't freeing the whole pixbuf, nor were we the GList of
subpixbufs. Plug both of these leaks in the error handling path
and in the default case.
All of the unreffing/cleanup should happen in the GDestroyNotify
for the result, not some in the handler.
https://bugzilla.gnome.org/show_bug.cgi?id=636489
While non-uniform border widths were parsed correctly, an arbitrary
side's width was picked when painting, so that each border ended up
with the same width and the widths specified in CSS were ignored.
At least for sides between non-rounded corners, using a different
border width can be reasonable, for instance at screen edges.
Different border widths around rounded corners are kind of crack,
but then it would be lame not to support it ...
https://bugzilla.gnome.org/show_bug.cgi?id=607500
For gradient backgrounds, borders were implemented by filling the
background shape with the border color first, and then scaling down
the path to draw the background.
The result is not correct[0], which is especially visible if the border
width is greater than the border radius - so instead of scaling down
the original path, use a separate path for the background.
The result is consistent with the borders we draw for non-gradient
backgrounds, and much closer to the correct standard behavior.
[0] http://www.w3.org/TR/css3-background/#the-border-radiushttps://bugzilla.gnome.org/show_bug.cgi?id=607500
non-absolute paths specified as url()'s in
stylesheets are resolved to be relative to the location
of the stylesheets they are in.
Inline styles don't have physical styleshseets sitting on disk,
which leads to a crash in the url resolving code.
This commit ensures that we don't try to use the stylesheet associated
with a url, if there isn't one to use.
This commit doesn't try to handle relative paths in inline styles.
It only prevents crashes when absolute paths are used.
https://bugzilla.gnome.org/show_bug.cgi?id=636975
This prevents a race at start up that could prevent the user
from getting loaded properly.
In the near future we need to drop the gdm user code entirely
and switch to using the accountsservice library.
When scrolled, st_box_layout_apply_transform() includes the scroll
offset and affects paint volumes. This is right for our children, but
our paint volume is determined by our allocation and borders and
doesn't scroll, so we need to reverse-compensate, the same as we do
when painting.
https://bugzilla.gnome.org/show_bug.cgi?id=630932
In order to take advantage of clipped redraws (only redraw the
parts that actually changed), we have to inform clutter about
our paint_volume by implementing the get_paint_volume virtual
method.
As this feature had been added in in clutter 1.5.x we now require
that.
https://bugzilla.gnome.org/show_bug.cgi?id=630932
We were going to great effort to include the normal directories in the
GJS search path and the code to to do this broke recently when
jsdir and jsnativedir were moved to gjs-internals-1.0.pc. However, it
was actually unnecessary since the standard directories are appended
to the default path.
(We continue to use a GNOME_SHELL_JS envvar separate from GJS_PATH
for the Shell to enable the somewhat unlikely case where someone wants
to invoke the shell specifying a GJS_PATH.)
https://bugzilla.gnome.org/show_bug.cgi?id=635367
Aggressive compiler flags can cause the compiler to be smart enough
to inline functions and detect variables not being set on certain
code paths but not smart enough to understand the overall logic;
add some extra initializations to suppress the warnings.
Fix several minor bugs in the logic found when double checking the
logic before adding the initializations.
Based on a patch by Marc-Antoine Perennou <Marc-Antoine@Perennou.com>.
https://bugzilla.gnome.org/show_bug.cgi?id=634225
At times it is desireable to hide actors from being picked even
with a mode of CLUTTER_PICK_ALL.
Currently we use a pattern of
clutter_actor_hide();
clutter_stage_get_actor_at_pos();
clutter_actor_show();
in these cases, which gets hideous if the actor we want to exclude
from the pick is located in another module.
A more elegant solution is to connect a handler to the ::pick signal,
which stops further emission.
Credit for the idea goes to Owen Taylor.
https://bugzilla.gnome.org/show_bug.cgi?id=634560
The code to draw the root background has now been moved into Mutter,
with added smarts to not draw obscured portions. Remove the old
version of the code and clone the Mutter background actor to draw
the background in the overview.
https://bugzilla.gnome.org/show_bug.cgi?id=634836
We weren't actually referencing the ShellTrayIcon actors at all
on creation, but would unreference them when they were removed,
causing crashes.
When we reference the actors, use g_object_ref_sink() so that
memory management is consistent whether or not the actors are
subsequently added to a parent actor.
Thanks for Jon McCann for help in tracking this down.
https://bugzilla.gnome.org/show_bug.cgi?id=635141
Add a "gicon" property so that a GIcon can be used instead of an
icon name, while still getting icon recoloring from the theme.
Also include a compatibility wrapper in libshell until GJS has
support for interface static methods.
https://bugzilla.gnome.org/show_bug.cgi?id=622451
Connect to the "changed" signal on the default icon theme, and
when it triggers:
- Evict all cached looked up icons from the StTextureCache
- Fake a style change on all StThemeContext; this will result
in StIcon looking up icons again.
https://bugzilla.gnome.org/show_bug.cgi?id=633866
It is not referencing them when adding, and also it is connecting
to the "destroy" signal, emitted on dispose, so there is no risk
of storing finalized objects.
https://bugzilla.gnome.org/show_bug.cgi?id=634781
We were always drawing the border and background of each
StThemeNode, even if they were transparent. The simple
optimization of checking the alpha provides a significant
performance boost (in a quick test, it increased the
overviewFpsSubsequent metric in the core performance test
from 28fps to 35fps).
https://bugzilla.gnome.org/show_bug.cgi?id=634752
Now that we're using St.Icon in the Javascript, there is no reason
to have separate st_texture_cache_load_icon_name() and
st_texture_cache_load_icon_name_for_theme(), instead just add
the StThemeNode argument to st_texture_cache_load_icon_name().
https://bugzilla.gnome.org/show_bug.cgi?id=633866
Use st_texture_cache_load_icon_name_for_theme() so that we get the
right colors for symbolic icons. The code refactoring to achieve this
also avoids constantly starting a new icon load each time we set
a property on initialization ... the icon is loaded only after we
have a #StThemeNode assigned.
https://bugzilla.gnome.org/show_bug.cgi?id=633865
Sometimes it's useful to get the theme node if there is one and do
nothing and wait for the ::style-changed signal if there is no theme
node. Add st_widget_peek_theme_node() that just gets the current
theme node if available. The caller must handle a %NULL return.
https://bugzilla.gnome.org/show_bug.cgi?id=633865
Add st_texture_cache_load_icon_name_for_theme() which, when loading a
symbolic icon, gets a #StIconColors from the theme node and uses that
to colorize the icon.
https://bugzilla.gnome.org/show_bug.cgi?id=633865
A new StIconColors object is used to efficiently track the colors
we need to colorize a symbolic icon.
st_theme_node_compute_icon_colors() is added to compute the
StIconColors for a theme node. (Refcounting of StIconColors means
that we'll typically share the colors object of the parent node.)
https://bugzilla.gnome.org/show_bug.cgi?id=633865
Scaling up icons from the loaded size to a larger size is uniformly
ugly and results in a long series of "fuzzy icon" bugs. It's better
to just load at the specified size and center. (Centering can be
overridden by packing not-fill in the parent container.)
https://bugzilla.gnome.org/show_bug.cgi?id=633865
We don't want the layout to change when we say, change from
battery-full to battery-full-charging, so we should request a square
based on the icon size unconditionally and not try to adapt to the
size of the texture we loaded. This also means that our layout is
independent of the loaded texure which, if we switch away from
using a ClutterActor child will allow us not queue a relayout when
the icon finishes loading.
https://bugzilla.gnome.org/show_bug.cgi?id=633865
Make StIcon compile and work in St.
Changes:
* ::icon-type and st_icon_set_icon_type are added to allow
specifying SYMBOLIC/FULLCOLOR for an icon.
* Ability to set the icon name from the theme is removed; it
wouldn't easily fit into our framework and two levels of
abstraction between code and image doesn't seem that useful.
* size CSS property is renamed from x-st-icon-size to icon-size
to correspond to what we are doing elsewhere.
* CSS and property based icon sizing are cleanly layered - if
you set the icon-size property, the CSS size is ignored.
* Add a simple JS test of StIcon.
https://bugzilla.gnome.org/show_bug.cgi?id=633865
StIconType will be used by a new StIcon class, so move it to the
header file of common enumerations. Including st-types.h which had
the St single-include check revealed that st-texture-cache.h didn't
have that check and several places were including that directly.
Fix that up.
https://bugzilla.gnome.org/show_bug.cgi?id=633865
The ability to set a "content image" on an icon relies on the ability
to have custom theme properties of a "border image" (9-slice) type.
We don't have this, and the capability of a bordered image specified
by the theme can be achieved more naturally with standard CSS facilities.
https://bugzilla.gnome.org/show_bug.cgi?id=633865
ST makes use of GTK+ for input methods and for icon themes; therefore
we have need to initialize GTK+ in order to test these parts of Clutter.
Instead of LD_PRELOADING our module, use a separately compiled executable
that links to the UI components in GNOME Shell, initializes Clutter and
GTK+ and hooks them together.
Getting all the symbols from St and the GUI components exported for
use via GJS requires a bit of contortion: we need to actually link the
St convenience library into a shared library and link the executable
to that since there is no way with libtool to take a convenience library
and put all its symbols into an executable --whole-archive style.
https://bugzilla.gnome.org/show_bug.cgi?id=633657
* Make sure all source files have a LGPL copyright header, and standardize
non-standard variations of the header to a common form.
* Check and update all copyright notices.
* Remove 'Written By:' lines. They are universally incomplete and
typically indicate only who started a particular file.
https://bugzilla.gnome.org/show_bug.cgi?id=634550
We weren't properly nulling out the vadjustment variable in dispose()
which meant in the case of explicit-destroy followed some time later
by garbage collection and disposing the actor again we would crash.
Use StWidget:track-hover rather than doing it ourselves. Don't assume
that hover is always TRUE after an enter_event or FALSE after a
leave_event, since we have a pointer grab and will be getting other
actors' events.
Don't ungrab the pointer when it leaves the button, since that
destroys the whole point of getting a grab in the first place.
Only consider the button to have been clicked when it has both grab
(meaning the mouse was pressed over the button) and hover (meaning the
mouse was released over the button).
Also remove the virtual pressed/released methods, which weren't being
used anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=633853
Like all X API, XFixesGetCursorImage returns arrays of 32-bit
quantities as arrays of long; on 64-bit systems we need to
convert to an array of 32-bit words before creating a texture
from the result.
https://bugzilla.gnome.org/show_bug.cgi?id=633591
Add StWidget:can-focus, st_widget_navigate_focus(), and
st_container_get_focus_chain(), and implement as needed to allow
keyboard navigation of widgets.
https://bugzilla.gnome.org/show_bug.cgi?id=621671
In d66e7dd49 I got confused between border_texture and
background_texture. The background_texture was being created as normal
but in the one place that it gets drawn I accidentally made it use the
border_material instead. This patch makes it create a
background_material similar to the border_material and uses it to
paint.
A few places in st-theme-node-drawing create one-shot material, paint
with it and then free it. This is suboptimal with current Cogl because
it will end up compiling an ARBfp program just for that single paint
and then it will throw it away when the material is destroyed.
There is a new function in st-private.c called
_st_create_texture_material. This creates a simple material for a
texture based on a common parent material that points to a dummy
texture. Any materials created with this function are likely to be
able to share the same program unless the material is further modified
to contain a different number of layers. It would be possible to use
cogl_set_source_texture for this instead except that it's not possible
to modify the material's color in that case so we couldn't render the
texture with opacity.
The corner textures are now stored as a handle to a material that
references the texture rather than storing the texure directly. There
is also a separate border_material member which always points to
border_texture as the only layer.
https://bugzilla.gnome.org/show_bug.cgi?id=633340
Plugging the GtkSocket icon can fail, in which case NaTrayManager emits
tray-icon-removed but the icon has never emitted plug-added, thus the
ShellTrayIcon has not been created. This results in various criticals
and exceptions in the tray-icon-removed handler.
https://bugzilla.gnome.org/show_bug.cgi?id=633028
MutterWindow and MutterPlugin have been renamed to MetaWindowActor
and MetaPlugin, mutter_plugin_list_windows() to
meta_plugin_list_window_actors(). Adapt to those changes.
https://bugzilla.gnome.org/show_bug.cgi?id=632500
Although within St itself there are situations where the semantics of
these functions (return TRUE or FALSE and return the actual value in
an out parameter) is useful, it's mostly just annoying at the
application level, where you generally know that the CSS property is
going to specified, and there is no especially sane fallback if it's
not.
So rename the current methods to lookup_color, lookup_double, and
lookup_length, and add new get_color, get_double, and get_length
methods that don't take an "inherit" parameter, and return their
values directly. (Well, except for get_color, due to the lack of (out
caller-allocates) in gjs.)
And update the code to use either the old or new methods as appropriate.
https://bugzilla.gnome.org/show_bug.cgi?id=632590
Gjs changed to separate the "basic" API from "embedder" API. Unfortunately
due to our use of the importer API and a few other bits, we need to use
the "module" one. In the future I plan to extend the core API to
support this use case.
Add volume control indicator which uses API from gnome-volume-control
to interact with PulseAudio and shows both input and output volumes.
Also adds a small wrapper around libcanberra in ShellGlobal, used by the
volume indicator to provide auditive feedback.
https://bugzilla.gnome.org/show_bug.cgi?id=629455
The library is introspected, and should not require using
Pulseaudio directly.
With help from Giovanni Campagna <scampa.giovanni@gmail.com>
(introspection annotations, build fixes)
https://bugzilla.gnome.org/show_bug.cgi?id=629455
st-theme stores some loaded stylesheets in a custom
stylesheets list. When removing items from this list
it unrefs them, but when adding items to the list it
neglects to ref them. This means that under certain
circumstances the list will contain items that have
already been freed.
https://bugzilla.gnome.org/show_bug.cgi?id=632477
StDrawingArea uses the member variable needs_repaint to keep track
of whether it needs repainting. The variable is set to TRUE correctly,
e.g. on allocation or style changes - alas, it is never set to FALSE,
resulting in the area being repainted continuously.
https://bugzilla.gnome.org/show_bug.cgi?id=632197
Since we're just using a cut-and-paste of gdm code there's a
slight impedance mismatch between how that code and the rest of
the shell manage debug messages. In GDM, they're out of sight by
default, but in gnome-shell they're visible and quite verbose.
This muddies up and masks the useful messages that other parts
of the code generate.
This commit just mutes the messages unconditionally by default,
since they aren't that useful anyway.
The GDM code upstream talks to the account service now,
has better introspection annotations, and is more
asynchronous.
This commit updates the shell's copy to the latest
upstream.
Note, the API changed somewhat and so the callers will
need to be fixed up subsequently.
https://bugzilla.gnome.org/show_bug.cgi?id=631888
1. move logic to shell-app.c
2. change state to RUNNING only after startup sequence complete
3. correct handle state for applications with several .desktop files
https://bugzilla.gnome.org/show_bug.cgi?id=623688
Non-uniform border-radii are already supported when using a gradient
background, this patch adds support for solid colors as well.
The currently applied technique of using corner textures and filling
the remaining area with rectangles is extended, so that each corner is
padded with rectangles to the size of the largest corner.
Add border-radius.js to test cases, to test non-uniform border-radii
with both solid color and gradient backgrounds.
https://bugzilla.gnome.org/show_bug.cgi?id=631091
Icons can be loaded as St.Icon.SYMBOLIC, FULLCOLOR, APPLICATION or
DOCUMENT. The first will look for a symbolic equivalent, the second
looks for a full-color version (and does fallback, eg, from
"drive-harddisk-usb" to "drive-harddisk"). APPLICATION and DOCUMENT do
full-color icons without fallback (as specified by the icon spec).
And update various callers to use the right flags.
Based on a patch from Matt Novenstern.
https://bugzilla.gnome.org/show_bug.cgi?id=621311
Switch to using the layer combine constant rather than the material
primary color for representing the opacity of the material; this
avoids triggering a Cogl bug where changing the primary color corrupts
the layer state.
https://bugzilla.gnome.org/show_bug.cgi?id=629616
The actor emitted by ShellTrayManager is now ShellTrayIcon, a subclass
of ShellGtkEmbed which has several properties on it which are (or will
soon be) useful to the shell.
Part of the rearranging to use ShellTrayIcon means that we now show
the ShellEmbeddedWindow before creating its ShellGtkEmbed, which
requires a few modifications to ShellEmbeddedWindow (notably, telling
it at construct time what stage it will be drawn on, since it needs to
know that before it has a ShellGtkEmbed now).
https://bugzilla.gnome.org/show_bug.cgi?id=608869
Previously the code to keep the X window aligned with its actor made
various assumptions that were true in the panel status tray area but
that are not true in the message tray. Fix it up by repositioning the
X window at clutter_actor_paint() time, which will definitely be
called every time the actor moves, whether it's because of its own or
its parent/ancestor's changes.
https://bugzilla.gnome.org/show_bug.cgi?id=608869
As of 1.4, ClutterGLXTexturePixmap is identical to
ClutterX11TexturePixmap (with the differences having been moved into
the cogl layer). So make ShellGtkEmbed use the (introspected) X11
version, which then allows us to make the instance and class structs
public as well.
https://bugzilla.gnome.org/show_bug.cgi?id=608869
Override the new mutter preference /apps/mutter/general/attach_modal_dialogs
to attach modal dialogs to their parent window. Animate the modal dialogs
expanding from the top of the parent window. Slowly dim the parent window
after the dialog comes up.
https://bugzilla.gnome.org/show_bug.cgi?id=612726
* Use --warn-all, --warn-error
* Fix various broken gtk-doc
* Drop unused shell_get_event_related
* For header defines, we currently require them to end in _H to be skipped
* Drop the no-longer-necessary fix-meta-rectangle.py hack
* Move to the convention of using -private.h for headers that are,
well, private.
* Add shell-wm-private.h
Move shadow helper functions from st-theme-node-drawing to st-private
to make them available to widgets which want to add shadows to internal
actors.
Also add a new helper function for creating the shadow material from a
ClutterActor.
https://bugzilla.gnome.org/show_bug.cgi?id=624384
Reorganize the existing code which parses the -st-shadow property
to allow parsing different shadow properties and add support for
the text-shadow property.
https://bugzilla.gnome.org/show_bug.cgi?id=624384
If a shadow property is inherited from a parent, multiple StThemeNodes
share a common StShadow. It would be possible to use st_shadow_copy()
for this purpose, but proper reference counting is nicer.
https://bugzilla.gnome.org/show_bug.cgi?id=624384
Add basic support for background-position, which only supports absolute
values.
Also don't require an unit to be specified for 0 (because the unit does not
really matter here 0 is 0 regardless of the unit).
https://bugzilla.gnome.org/show_bug.cgi?id=624375
Add st_theme_node_paint_equal() and use that to do two things:
1) Avoid animating transitions where nothing changes.
2) Copy cached painting state from the old theme node to the new
theme node.
https://bugzilla.gnome.org/show_bug.cgi?id=627083
Creating an FBO may be expensive, so we should avoid the operation
if possible. When transitioning between theme nodes, the widget's
opacity is used to paint to the offscreen textures which are blended
together - this means that the textures have to be recreated each time
the widget's opacity changes. It is much more effective to paint the
textures at full opacity and respect the widget's paint opacity when
blending the textures together.
https://bugzilla.gnome.org/show_bug.cgi?id=627085
The current search system uses the OR operator to concatenate search
terms. While results which are matched multiple times sort before
other matches, it is almost guaranteed that adding an additional term
to the search increments the number of results, which is rather
surprising.
https://bugzilla.gnome.org/show_bug.cgi?id=610955
gdk_screen_get_rgb_colormap() has been removed from GTK+; there's
no longer a special visual that is used for drawing true-color
images distinct from the system visual. So, we don't need to
check for it; if the visual isn't the system visual, we just
fall through to the case where we create a new GdkColormap.
The function has been upstreamed as clutter_actor_contains() - with
the switch to clutter-1.4 it is now available to the Shell, so it
is no longer necessary to keep a copy in-tree.
https://bugzilla.gnome.org/show_bug.cgi?id=626512
Add support for the CSS :first-child and :last-child properties to
StContainer, and thus to all containers in St and ShellGenericContainer.
The internal ordering of the container's children is used to determine
the child to which to attach the pseudo class, not the children's
positions. This means that containers where positions can differ from
the ordering (ShellGenericContainer / StGroup) may behave unexpectedly,
so some caution is required.
https://bugzilla.gnome.org/show_bug.cgi?id=625316
When we are manually starting dconf in the case where it can't
be activated via D-Bus, we need to set LD_LIBRARY_PATH in its
environment, since dconf is no longer linked with a rpath.
(Unlike the rest of GNOME, it doesn't use libtool.)
There's an assertion in calculate_gaussian_kernel() to avoid a division
by zero - due to an unnecessary cast from float to int this assertion
is triggered incorrectly for small (but non-zero) values, e.g. a blur
radius of 1px.
Recently, g-ir-scanner got a little stricter with regard to
GSList, marking functions not introspectable if the element
type is not annotated. This fixes a visible JS Error by g-ir
and gdmuser/gdm-user-manager.c
Add SHELL_STAGE_INPUT_MODE_FOCUSED, to move the keyboard focus to the
shell without grabbing the keyboard or mouse, and make
stage_input_mode into a GObject property so that (among other things),
callers can tell when MODE_FOCUSED reverts back to MODE_NORMAL.
https://bugzilla.gnome.org/show_bug.cgi?id=623429
g-ir-scanner is currently buggy and confuses the Gdk.Rectangle alias
with MetaRectangle. Since this is moderately hard to fix in
gobject-introspection and the fix would conflict with in-progress
changes, work around by doing a 'sed job' on the generated Meta.gir.
https://bugzilla.gnome.org/show_bug.cgi?id=623640
The conversion of GdkRectangle to a typedef for cairo_rectangle_int_t
in GTK+-3 makes it no longer a proper boxed type (it's still registered
boxed, but gobject-introspection doesn't know that.) So, switch to using
MetaRectangle, which is now registered as a boxed type by Mutter.
https://bugzilla.gnome.org/show_bug.cgi?id=621845
"text-align" allows setting the alignment of text, with respect to
other lines and allocated space, without requiring a reference to
the ClutterText (which is private for most widgets).
If not specified, all text is left-aligned.
https://bugzilla.gnome.org/show_bug.cgi?id=622447
* Add dconf and dependencies to the moduleset and add
libxml2 dependency to gnome-shell-build-setup.sh
* if we can't ping the dconf D-Bus service, try to
activate it manually.
* Stop forcing GConf via GSETTINGS_BACKEND
https://bugzilla.gnome.org/show_bug.cgi?id=622308
It has probably crossed the line to evil by a mile or so, but here
it is: a Tweener.slowDownFactor replacement used by all animations
without exception.
While at it, update Tweener to use the new setTimeScale() upstream
function instead of adjusting the timeline directly.
https://bugzilla.gnome.org/show_bug.cgi?id=622249
Windows are only added to an application if they are considered
"interesting". If we keep it that way, we cannot unconditionally
call _shell_app_remove_window() - applications without interesting
windows are not considered running, so the call crashes the shell.
https://bugzilla.gnome.org/show_bug.cgi?id=622236
Use GSettings for all Shell configuration. GConf is kept to read
configuration from external programs (Metacity, Nautilus and Magnifier),
but ShellGConf is removed because it's mostly useless for the few calls
we still have. Also get rid of unused GConf code in ShellAppSystem.
A basic GConf schema is still used to override Metacity defaults and
configure Magnifier in a system-wide fashion. GConf is also used as
GSettings backend via the GSETTINGS_BACKEND environment variable.
All of this will be removed when these programs have been ported
to GSettings and able to use dconf.
GLib 2.25.9 is required. Schemas are converted to the new XML format,
and compiled at build time in data/ so that the Shell can be run from
the source tree. This also requires setting the GSETTINGS_SCHEMA_DIR
environment variable both when running installed or from source tree,
in src/gnome-shell.in and src/gnome-shell-clock-preferences.in.
https://bugzilla.gnome.org/show_bug.cgi?id=617917
This is a small memory usage optimization, and cleans up the code.
In particular, this will help for later patches which perform
more substantial operations on running apps.
https://bugzilla.gnome.org/show_bug.cgi?id=621203
Nothing uses ShellOverflowList any more, so remove it. (Even if we
want that sort of functionality again later, we'd want it to be
StWidget-based, and with a name less likely to be confused with
StOverflowBox.)
https://bugzilla.gnome.org/show_bug.cgi?id=621582
This function reads a single image file which contains multiple
images internally.
The image file will be divided using @grid_width and @grid_height;
note that the dimensions of the image loaded from @path
should be a multiple of the specified grid dimensions.
https://bugzilla.gnome.org/show_bug.cgi?id=598349
The framebuffer setup code can fail, e.g. when the texture used as
color buffer has a height/width of 0. In that case, the call to
cogl_pop_framebuffer() will crash the shell trigger an assert. Add
error checking to fail gracefully.
Add _st_actor_contains() in st-private for use within St, and
monkey-patch in a Clutter.Actor.contains() for use by javascript, and
then replace all the duplicate implementations with one or the other
of those.
https://bugzilla.gnome.org/show_bug.cgi?id=621197
Our behavior of reversing the animation when the widget's style
changes back to the previous one is sound. On the other hand, when
there's a change to a new style while a transition is active, we
simply cancel the ongoing transition. Updating the transition
correctly so that the new one starts from an intermediate state
is hard.
Nevertheless, if the style changes before any time of the transition
has elapsed, we should do better than the current behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=621140
First, we were passing an incorrect timestamp to
meta_display_focus_the_no_focus_window - fix that.
The invocation of set_focus_app to the started app there couldn't
really work, because (if the above call had worked) we'd get the
X reply *after* the started app.
What we need to untangle here is the distinction that's now made in
ShellApp between _STATE_STARTING and _STATE_RUNNING. A nice way to
start doing this is to rebase ShellWindowTracker to only be concerned
with app states. Concretely, the current "has windows implies
running" logic now lives just inside shell-app.c.
Rename the app-running-changed signal to be app-state-changed. This
will ultimately be useful so that inside the panel, we can track
the last started app.
https://bugzilla.gnome.org/show_bug.cgi?id=620899
The current code only sets up / updates transitions when the new
node's transition-duration is non-zero. It should cancel an
existing transition if the duration is 0.
It is sometimes desirable to fade smoothly between two styles
instead of changing it abruptly.
Add transitions controlled by the transition-duration CSS property.
https://bugzilla.gnome.org/show_bug.cgi?id=619025
StThemeNodes may have properties - namely shadows - which paint
outside an actor's allocation. This is not a problem unless drawing
is redirected to an offscreen buffer, in which case the actually
painted size is needed in advance when setting up the buffer.
Add a convenience method to calculate an allocation large enough to
paint the node.
https://bugzilla.gnome.org/show_bug.cgi?id=619025
Add st_theme_node_equal() - two nodes are considered equal iff they
refer to identical elements, so e.g. .example and .example:hover are
not equal, even if no .example:hover rule exists in the CSS.
https://bugzilla.gnome.org/show_bug.cgi?id=619025
Previously we were trying to match up remote windows with local
.desktop files, which is definitely wrong. This patch simply
falls back to the app-from-window case for this; better handling
would need design.
https://bugzilla.gnome.org/show_bug.cgi?id=620855
Separate out the main app view into different sections based on the categories
in the desktop file. The configuration is done via gmenu and the desktop menu
specification, we set XDG_MENU_PREFIX="gs-" on startup, so that gmenu reads
gs-applications.menu, which we install.
There is no support for "submenus" - only the menus directly under
Applications will be displayed as categories.
https://bugzilla.gnome.org/show_bug.cgi?id=614131
Currently we only relayout when the screen size changes, this gets
the cases where a monitor gets added/removed but not when the primary
monitor changes.
We need to relayout on all monitor layout changes.
Remove ShellGlobal::screen-size-changed signal as it is no longer used, Gdk is
used to track changes now.
A ShellGlobal::gdk-screen property is added for this purpose.
https://bugzilla.gnome.org/show_bug.cgi?id=620377
When hovering over the entry's ClutterText, the entry itself
currently receives a leave event and updates the hover state.
Apply the same logic as StWidget itself to treat children as
part of the entry.
https://bugzilla.gnome.org/show_bug.cgi?id=620381
Add an event when we receive an event on buffer swap completion; we'll
only get this if Clutter is using the INTEL_swap_event GLX extension,
but it's useful to see the actual timing of video frames.
The recorded event includes the actual timestamp of the swap, since
we are given that in the GLX event - on my system it tends to be
consistently 80-100us before we log the event, but if something was
going wrong in event handling (too much synchronous work), then that
could could show up as a longer delay.
https://bugzilla.gnome.org/show_bug.cgi?id=619516
Currently shadows disregard the overall opacity, so e.g. setting
an ancestor's opacity does not effect the shadow. Fix this by
deferring the setting of the shadow's color until it is painted.
Also move duplicated drawing code from st_theme_node_paint() into
its own function.
https://bugzilla.gnome.org/show_bug.cgi?id=619083
The preference dialog for the panel clock does not set its gettext
domain, so it's not translated even if though translations are
already available.
Fix by setting the domain in the GtkBuilder file and binding the
domain to the locale directory.
https://bugzilla.gnome.org/show_bug.cgi?id=618873
Currently the size of an StGroup depends exclusively on the group's
children - it should be possible to override this behaviour with
fixed values in the CSS.
https://bugzilla.gnome.org/show_bug.cgi?id=613907
Update the GNOME Shell version to 2.31.2, and make corresponding
updates to dependencies:
clutter => 1.2.8
mutter => 2.31.2
gobject-introspection => 0.6.11
gjs => 0.7
Typo: 10000000 instead of 1000000 for a million. Also, use
G_INT64_CONSTANT instead of LL for a 64-bit constant, to avoid
extraneous 128-bit arithmetic on 64-bit machines.
Add a command line option to upload the generated performance report
to a web service. The options for the upload (url, system name, secret
key) are read from ~/.config/gnome-shell/perf.ini.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Switch from having separate METRICS and METRIC_DESCRIPTIONS objects
in a perf module to a single METRICS array. This is done so the
perf module can define the units for each metric.
In addition to improving the output in the web interface, the purpose
of having units is to give some clue about how to pick from multiple
values from different runs. In particular, with the assumption that
"noise" on the system will increase run times, for time values we want
to pick the smallest values, while for "rate" values, we want to pick
the largest value.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Add --perf-output=<filename> option to gnome-shell that combines
the reports written for each run by the C/Javascript code into
a complete report.
If this option is not specified, a brief human-readable summary
is printed to stdout instead.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
When SHELL_PERF_OUTPUT is set, instead of just dumping out the metrics, dump
a more complete report with:
- Event descriptions
- Metric descriptions and value
- Event log
Helper functions shell_perf_log_dump_events() and shell_perf_log_dump_log()
are added to ShellPerfLog to support this. The gnome-shell wrapper is adapted
to deal with the changed report format.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Add a helper function to write a string as UTF-8 to a GOutputStream.
The signature of GOutputStream:
gboolean g_output_stream_write_all (GOutputStream *stream,
const void *buffer,
gsize count,
gsize *bytes_written,
GCancellable *cancellable,
GError **error);
Can't currently be handled by GJS.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Add gnome-shell options:
--perf-iters=ITERS"
Numbers of iterations of performance module to run
--perf-warmup
Run a dry run before performance tests
Make a successful run of a performance test return 0 not non-zero,
and handle the difference between that and a 0-exit in normal
usage (meaning replaced) in the wrapper.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Move the code that starts gnome-shell and waits for it to exit
to a function in preparation for running it multiple times when
doing iterations of a performance test.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Add some basic statistics for allocated memory based on mallinfo(),
and use that to define two metrics:
usedAfterOverview: bytes used after the overview is shown once
leakedAfterOverview: additional bytes used when the overview is
shown a second time.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Add a facility for defining and recording numeric statistics
as performance events
shell_perf_log_define_statistic()
Define a statistic and the corresponding event type
shell_perf_log_update_statistic_[ix]() -
Update the stored statistic value
shell_perf_log_add_statistics_callback()
Add a function called before collecting statistics
shell_perf_collect_statistics()
Update statistics and record events for them
In addition to the explicit collection, statistics are
recorded at a periodic interval (currently 5s)
https://bugzilla.gnome.org/show_bug.cgi?id=618189
We want to be able to summarize the behavior of the shell's
performance in a series of "metrics", like the latency between
clicking on the Activities button and seeing a response.
This patch adds the ability to create a script under perf/
in a special format that automates a series of actions in the
shell, writing events to the performance log, then collects
statistics as the log as replayed and turns them into a set
of metrics.
The script is then executed by running as gnome-shell
--perf=<script>.
The 'core' script which is added here will be the primary
performance measurement script that we use for shell performance
regression testing; right now it has a couple of placeholder
metrics.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
ShellPerfLog provides a way for different parts of the code to
record information for subsequent analysis and interactive
exploration. Events exist of a timestamp, an event ID, and
arguments to the event.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
To support scheduling performance-measurement scripts that want to run
a number of actions in series, add shell_global_run_at_leisure() to run
a callback when all work is finished.
The initial implementation of this is not that accurate: we track
business in Tweener.js via new shell_global_begin_work(),
shell_global_end_work() functions, and we also handle the case
where the main loop is continually busy.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
The API docs for ShellApp claimed it sorted by the last time the
user interacted with the app, but if one closed a window, then
we would fall back to comparing against a possibly much older
timestamp from another window. Fix this by just keeping a
user time per app.
Also clean up the comparison function to explicitly check the state
instead of deferring to the window list.
https://bugzilla.gnome.org/show_bug.cgi?id=618378
The ShellGlobal initialization performs several actions like connecting
to the X server, ensuring directories exist, etc., that are problematic
because we were creating the object even when running the binary for
introspection scanning. During compilation we may not even have X11
available in e.g. autobuilder type environments, and it's just a
bad idea to connect even if we do.
Avoid this by deferring creation of the ShellGlobal object
until the plugin is actually started.
Now that we're initializing things later, remove the connection to
screen changes, and initialize cached ShellGlobal state at the point
when the plugin is set. The root pixmap actor is now sized initially
on creation too. Instead of relying on screen-size-changed being
emitted on startup, explicitly invoke _relayout().
https://bugzilla.gnome.org/show_bug.cgi?id=618371
I have no idea why there existed code that if we saw e.g. min-width
without a width, we assigned min-width to ->width, thus effectively
treating it as a maximum.
Just delete that bit.
https://bugzilla.gnome.org/show_bug.cgi?id=618482
Starting with gtk-2.20.0 there is a gdk_screen_get_primary_monitor,
which supports querying the primary monitor from xrandr.
But due to a sorting bug and lack of heuristics in the fallback path,
it isn't really useable.
Those bugs are fixed in gtk-2.20.1, so use it when building with
gtk-2.20.1+.
https://bugzilla.gnome.org/show_bug.cgi?id=608647
Passing an explicit width in the wfh case or a height in the hfw case
messes up the request caching, and confuses actors that assume they
won't be called with an explicit width/height unless they're being
allocated along the other axis.
https://bugzilla.gnome.org/show_bug.cgi?id=618295
Adds the ability to create one or more zoom regions that show magnified or
enhanced views of the desktop. The magnifier provides options for:
* magnification factor,
* four mouse tracking modes common to screen magnifiers,
* positioning the magnified view in one of four screen location, or full screen,
* crosshairs to accentuate the position of the mouse,
* user preferences persistence via GConf (schemas in
.../data/gnome-shell.schemas).
* a DBus API to allow other processes to drive the magnifier as a service.
https://bugzilla.gnome.org/show_bug.cgi?id=595507
Add StContainer, which implements the ClutterContainer interface based
on the container methods in st-private and make the existing containers
subclass it.
https://bugzilla.gnome.org/show_bug.cgi?id=613907
To replace all calls to deprecated code, GTK+ 2.20 is required - add
some basic compatibility code, so that is still possible to build the
shell with GTK+ 2.18 when not using -DGSEAL_ENABLE.
https://bugzilla.gnome.org/show_bug.cgi?id=618258
With the transition to GTK+ 3.0, direct access to struct members
will no longer be possible.
This bumps the required minimum version of GTK+ to 2.20.
https://bugzilla.gnome.org/show_bug.cgi?id=618258
The StTable code only supports height-for-width. When called in
width-for-height sizing mode, instead of treating the -1 flag
value of 'for_width' as a real width, and requesting all the
children at 1 pixel wide, use the natural width of the table
as the width for determing the height.
Since we can't rewrap in width-for-height mode, we then report
the natural width also as the minimum width of the table.
https://bugzilla.gnome.org/show_bug.cgi?id=618104
readlink() on /proc/<pid>/exe can have results like:
/usr/bin/gnome-keyring-daemon.#prelink#.5DFZsF (deleted)
/usr/bin/gnome-session (deleted)
To find gnome-session in a more robust way, read /proc/<pid>/cmdline
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=616706
The design calls for raising all windows for a given app in
certain circumstances; implement this. The new _focus method
raises all windows for the app if it's running.
We further change the _activate method (which a lot of the shell
UI calls now) to invoke _focus for the running case, which means
that e.g. the application well will now raise all app windows.
https://bugzilla.gnome.org/show_bug.cgi?id=616051
When creating the directory to store user data, XDG_DATA_HOME is
not guaranteed to exist. Also, the standard mandates permissions
of 0700 for the directory.
https://bugzilla.gnome.org/show_bug.cgi?id=617555
As StEntry handles hover differently depending on whether it is
activated or not, the generic hover support in StWidget is
insufficient. Nevertheless it makes sense to set the hover status
using StWidget methods instead of setting the pseudo class directly.
While the extension system already uses an XDG location (XDG_CONFIG_HOME),
other components use the deprecated $HOME/.gnome2 directory.
Replace both with XDG_DATA_HOME - the existing data (app usage stats,
looking glass history and extensions) is not migrated to the new location.
https://bugzilla.gnome.org/show_bug.cgi?id=617555
The (optional) spread radius allows to make the shadow bigger without
enlarging the blur value. Mozilla supports this parameter for the
-moz-box-shadow property.
https://bugzilla.gnome.org/show_bug.cgi?id=613832
To avoid visual duplication with the application menu, eliminate
the window menu button. (The window menu can still be accessed by
right-clicking on the title bar, or Alt-right-clicking anywhere on the
window.)
This is implemented using the new Mutter facility for GConf key
redirection; we add separate key for 'button_layout' with a default
that omits the menu button.
https://bugzilla.gnome.org/show_bug.cgi?id=591390
With the changes from bug 615586, Mutter now expects a separate start()
method which is called after construction. Move our initialization from
constructed() to start() so it can access the MetaScreen.
https://bugzilla.gnome.org/show_bug.cgi?id=615592
This patch combines several high level changes which are conceptually
independent but in practice rather intertwined.
* Add a "state" property to ShellApp which reflects whether it's
stopped, starting, or started. This will allow us to later clean
up all the callers that are using ".get_windows().length > 0" as
a proxy for this property
* Replace shell_app_launch with shell_app_activate and shell_app_open_new_window
A lot of code was calling .launch, but it's signficantly clearer
if we call this ".open_new_window()", and later if we gain the ability
to call into an application's menu, we can implement this correctly rather
than trying to update all .launch callers.
* Because ShellApp now has a "starting" state, rebase panel.js on top of
this so that when we get a startup-notification sequence for an app
and transition it to starting, it becomes the focus app, and panel.js
cleanly just tracks the focus app, rather than bouncing between SN
sequences. This removes display of non-app startup sequences, which
I consider an acceptable action in light of the committed changes
to startup-notification and GTK+.
https://bugzilla.gnome.org/show_bug.cgi?id=614755
We can't use gdk_display_get_pointer/gdk_window_get_pointer from gjs
when XKB is active. We already had a wrapper that did the
get-modifier-state part of that, but some places also need the
get-pointer-location part of it. So update our wrapper to return both,
and update js code to use it.
https://bugzilla.gnome.org/show_bug.cgi?id=613428
Also, remove a lot of cruft from genericDisplay.js leftover from
previous St-ifications, and remove the pre-gtk-2.16 hacks from the
status tray in panel.js (which are much less needed with the
nearly-all-black panel anyway).
https://bugzilla.gnome.org/show_bug.cgi?id=614516
The actual changes to shell-menu.[ch] are pretty minimal; most of the
changes there are just style/spacing/indentation.
Also, removed shell_menu_append_separator() since it wasn't needed;
the separators would already have been behaving as intended just
because they were non-reactive.
https://bugzilla.gnome.org/show_bug.cgi?id=614516
Most subclasses override get_preferred_width/height, but if they don't
(eg, StDrawingArea), then make sure they still take CSS-specified
sizes into account.
https://bugzilla.gnome.org/show_bug.cgi?id=614516
StThemeNode holds a reference to its parent, but we never released
that reference. This could cause us to hold onto whole chains
of theme nodes with rather dire memory usage implications.
Also move the other g_object_unref into _dispose.
https://bugzilla.gnome.org/show_bug.cgi?id=614660
Currently shell_global_get_primary_monitor just returns the first screen,
in the list as primary.
This is not always correct as the first screen reported by mutter isn't always,
the first one listed by RANDR.
Use gdk_screen_* to query the monitor information and add a heuristic to prefer
LVDS displays (similar like in done for gnome-panel) to prefer the laptop's
internal screen over external displays.
https://bugzilla.gnome.org/show_bug.cgi?id=608647
Ok, there admittedly wasn't a strong rationale for having it in a
later, and by performing this immediately we reduce race conditions
for our focus_app versus startup_notification handling.
https://bugzilla.gnome.org/show_bug.cgi?id=612833
Paint/pick all children, regardless of whether or not they lie within
the content_box. The previous behavior was that a child that was 99%
outside the box would be fully visible, but a child that was 100%
outside the box would be fully hidden. This is somewhat odd, and
doesn't match the behavior of the other St container classes, and at
any rate, the use of clutter_actor_get_allocation_box() for this
optimization was incorrect since it doesn't take into account
transformations (anchor point, rotation, etc) that might cause the
child to be drawn within the content_box anyway.
(For scrolled StBoxLayouts, drawing is still clipped to the
content_box, as before, but will now properly take transformations
into account as well.)
https://bugzilla.gnome.org/show_bug.cgi?id=614047
When the window's top-left corner is the same as the monitor's top-left
corner the check in shell_global_get_focus_monitor fails to detect that.
Use <= rather than < to fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=613944
The idea behind this move is that we have a lot more control over
rendering if StWidget isn't a big pile of actors, and things are
more efficient.
https://bugzilla.gnome.org/show_bug.cgi?id=607500
The hover rewrite added a freeze/thaw_notify to
st_clickable_leave_event() (to match the one already in
st_clickable_enter_event()), which broke code in two places that
assumed "pressed" would still be TRUE when "hover" changed to FALSE.
Fix that by exposing the "held" property as well.
A pointer does not equal to an int on x86_64
(which results into pointer - pointer not being an int either),
fix that by casting the resulting value to an int.
Breakage was introduced by commit 909b5ec43c
If track-hover is set, update the hover property automatically, and
the "hover" pseudo class to match, as StClickable used to do. (Remove
the corresponding code in StClickable). Tweak the tooltip handling to
use track-hover, which also makes it slightly more reliable in the
presence of reactive children, etc.
Since style_class and pseudo_class are space-separated lists of names,
add new methods to add and remove individual names rather than just
re-setting the entire name.
Update existing code to use the new pseudo-class methods where
appropriate. In some cases, this may result in actors having multiple
pseudoclasses where previously they only had one at a time, but there
don't seem to be any visible differences.
(There are some places that could usefully use the new style_class
methods as well, but this patch doesn't change them.)
Also, update test-theme.c to test the new methods.
https://bugzilla.gnome.org/show_bug.cgi?id=604943
The way we were loading data into a CoglTexture, then pulling it out
and manipulating it on the CPU, then loading it back into a texture
was a bit lame.
Clean things up a bit here by loading directly into the CPU, doing
the fading, then creating a texture.
Also cache the faded data in StTextureCache.
https://bugzilla.gnome.org/show_bug.cgi?id=612759
If we don't do this, then boolean/int/list keys will seem to sort of
work (but defaulting to false/0/[] instead of the correct schema
defaults), but string keys will return null, which will usually cause
exceptions or crashes.
https://bugzilla.gnome.org/show_bug.cgi?id=611214
The relationship between adjustments and scrollbars and
scrollable widgets was much more complex than it needed to be.
StScrollView: Have the scroll view own a pair of adjustments,
set them on the child on add(), remove unnecessary
change notification signal connections.
StBoxLayout: Remove auto-create of adjustments, just take the
adjustments from the scrollbars and set them on the scrollable
child. Notify for hadjustment/vadjustment properties.
StScrollBar: Notify adjustment property.
StScrollable: Document how adjustment setting works.
https://bugzilla.gnome.org/show_bug.cgi?id=611740
* Add missing chain-up for dispose and finalize methods
* ShellGenericContainer needs to destroy its children in dispose()
* Fix variable naming and excess casts in st_label_dispose()
https://bugzilla.gnome.org/show_bug.cgi?id=612511
StScrollable: Document how to set adjustments
StBoxLayout: Make sure that we always have upper >= lower + page_size,
so that clamping works properly. Set the page_increment to be slightly
less than the page_size so there is some overlap, as is customary.
StScrollView: Remove unnecessary fabs() calls, rewrite expressions
for additional clarity.
https://bugzilla.gnome.org/show_bug.cgi?id=611740
- Fix existing typos and spacing problems
- Get preferred height, not current height, of shadows
- Let shadows overflow don't clamp them when we have too little space
- Remove a now-unecessary stray MAX()
- Fix up scrollview visibility for the pathological case of no child
- Disconnect from adjustments on remove()
- Don't unset the adjustments on the child on remove(), since they
already existed or were autocreated on add()
(We should what we are doing and set the adjustments of the
scrollbars on the child rather than setting the adjustments of
the child, so we match GTK+'s scrolllable interface, but this
at least makes it consistent instead of a weird mix.)
https://bugzilla.gnome.org/show_bug.cgi?id=611740
StScrollable: Document how size negotation now works between the
parent and scrollable child.
StBoxLayout: Adapt to the new contract for how size negotiation
works; in particular, handle being allocated less than the
minimum size when scrolled and treat the minimum size as the
size of the scrolled area in instead of the natural size.
StScrollView: Substantially rewrite with fixes including:
- Implement new size negotation contract; this allows us
to determine scrollbar visibility without having to
connect to the adjustment.
- Implement all ALWAYS along with the existing NEVER/AUTO
- When hiding and showing scrollbars and shadows, don't
hide and show widgets, just turn on and off including them
in pick and paint. This avoids queueing relayouts.
- Cleanups for the code for connecting to adjustments,
for changing policy, and for turning on and off shadows.
scroll-view-sizing.js: New test case for StScrollView, allowing
resizing the scroll view interactively, changing the scrollbar
policies and turning shadows on and off.
https://bugzilla.gnome.org/show_bug.cgi?id=611740
When an StScrollView is allocated, allocating the child would
cause the adjustment values to change, which would result in
the scrollbars queueing a relayout, which isn't allowed during
allocation.
To avoid this, instead of queueing a relayout when the adjustment
changes:
- When we have a valid allocation already, just go ahead
and reallocate the children.
- Otherwise do nothing immediately and wait until we get allocated
Because the 'needs_allocation' flag in ClutterActor isn't exposed,
this requires some slightly ugly code to shadow that state locally.
https://bugzilla.gnome.org/show_bug.cgi?id=611944
Having StDrawingArea use ClutterCairoTexture causes circularity
problems with sizing - StDrawingArea wants to use its allocation for
the size of the texture, but ClutterTexture wants to use the size of
the texture to determine the requited size.
Avoid this by making StDrawingArea directly use Cairo and CoglTexture;
while doing this, the API is changed a bit for simplicity and to
match our use case:
- Instead of clutter_cairo_texture_create(), we have
st_drawing_area_get_context() to retrieve an already created
context. This can only be called in the ::repaint signal.
- The ::redraw signal is changed to ::repaint so we can have
st_drawing_area_queue_repaint() that doesn't collide with
clutter_actor_queue_redraw()
- ::repaint is now emitted lazily when painting the actor rather
than synchronously at various different points.
https://bugzilla.gnome.org/show_bug.cgi?id=611750
- Specify a minimum version of clutter-1.2.0
- Switch clutter branch in the moduleset to master
- Replace deprecated cogl_texture/material_unref() with
cogl_handle_unref()
- Use cogl_clip_push_rectangle() rather than cogl_clip_push()
- Replace cogl_check_extension() with strstr - should be
accurate enough.
https://bugzilla.gnome.org/show_bug.cgi?id=610679
It's wrong to do anything that requires looking up a widget's style
before you add the widget to the stage, since its final style may
depend on properties inherited from its parents.
st_widget_get_theme_node() used to emit a warning in this case, but
many would-be contributors apparently didn't notice. Help them out.
https://bugzilla.gnome.org/show_bug.cgi?id=610279
StButton animated the background for button transitions; since these aren't
presently part of the shell design, simply remove them. We can readd
these in the future.
StTooltip should probably have :vertical and :horizontal pseudo classes
to make the arrow work but it should still function.
https://bugzilla.gnome.org/show_bug.cgi?id=607500
Rather than having ShellTextureCache know about the type of each
item it's caching, this lays the foundation for simply caching
arbitrary string -> CoglHandle.
https://bugzilla.gnome.org/show_bug.cgi?id=607500
For StWidget we want the ability to load raw CoglHandle references
rather than having a big pile of actors backing StWidget.
Several bits of StWidget expect to be able to synchronously load
textures; this is a crutch to support that until we can cleanly
make this asynchronous.
https://bugzilla.gnome.org/show_bug.cgi?id=607500
Brute force merge these two by essentially replacing St.TextureCache
with a (renamed) Shell.TextureCache.
One function was added for convenience, namely "st_texture_cache_load_file_simple".
St.TextureCache had a function to load a texture from a filename, and it
returned NULL on error but only half the callers actually checked this. This
function is better.
https://bugzilla.gnome.org/show_bug.cgi?id=607500
StScrollBar: Be robust against being disposed multiple times,
which can happen, and in fact, normally happens when destroying
the parent.
StScrollView: Implement remove() for the hscroll and vscroll members,
and just destroy them in dispose() and let them be removed.
unparent the shadows, instead of just unref'ing them directly.
https://bugzilla.gnome.org/show_bug.cgi?id=611203
When starting oocalc or ooimpress from oowriter's menu get_app_for_window,
fails to recognize the newly started up as such, which result into the appMenu
still showing "Openoffice.org Writer" as app name.
Fix this by trying to window itself first before using the group for finding the app.
https://bugzilla.gnome.org/show_bug.cgi?id=611288
Since shell-slicer.h includes st.h, and that includes
<st/*.h>, we need to add -I $(srcdir) to the command line when
running g-ir-scanner to generate Shell-1.0.gir.
For srcdir != builddir, in the builddir, the st/ subdirectory doesn't
exist, so we can't generate st.h there. Just switch to building st.h
directly in the current directory. (The other option would be to
create a st/ subdirectory in the builddir if necessary; might be a
little cleaner, but this works for now and gets things distchecking.)
Add a 'vshadow' property to StScrollView, which, when turned on,
overlays gradient shadows on the top and bottom of the StScrollView.
Turn this on for the StScrollView used for the app browser.
https://bugzilla.gnome.org/show_bug.cgi?id=609604
The type we don't currently handle is _ALWAYS, my original use
of g_return_if_fail was wrong.
Also the default should be AUTOMATIC in the properties, not ALWAYS.
Finally the test case was still using the incorrect St.ScrollPolicy.
https://bugzilla.gnome.org/show_bug.cgi?id=609015
Previously we were hacking out the vertical scrollbar, this patch
allow us to sanely say in which directions we want to scroll.
Note this patch intentionally changes St to depend on GTK+ in the
API. I believe this is a correct long term change where we should
view St as co-evolving with GTK+ rather than replacing or paralleling.
https://bugzilla.gnome.org/show_bug.cgi?id=609015
st_theme_node_adjust_preferred_width/height now limit the content area
of an actor to the max, if given. (The requested width/height may be
larger to make room for borders, etc.)
https://bugzilla.gnome.org/show_bug.cgi?id=606755
In StBin, StBoxLayout, and StTable, if a child has a potential
allocation that is larger than its preferred size, we give it its
preferred size instead. However, the corresponding
get_preferred_height/width methods were not making the same
assumption, which meant that if we had more width than the widget
wanted, we would allocate it its preferred width, but with the height
that corresponded to the larger width.
Fix this by defining new helpers _st_actor_get_preferred_width() and
_st_actor_get_preferred_height() and using them everywhere. Also, make
StBin and StTable use _st_allocate_fill() rather than having
nearly-identical duplicate copies of the code.
https://bugzilla.gnome.org/show_bug.cgi?id=609848
The forward/backward steppers are always allocated a square region at the
scroll bar's ends. Change the allocation to be based on the steppers' size
requests instead.
https://bugzilla.gnome.org/show_bug.cgi?id=609401
Make the framerate, file extension and gstreamer pipeline used by the
screencast recorder configureable using gconf.
This patch does not change the defaults, it justs provides a way for
the user to override them.
https://bugzilla.gnome.org/show_bug.cgi?id=608995
Fixes drawing of the overview in the case where there is no root pixmap
(eg, --xephyr mode).
(And the workaround for not drawing an unintialized ClutterTexture can
be removed now, since the texture will always have been initialized.)
https://bugzilla.gnome.org/show_bug.cgi?id=609339
To comply with C89, structure initializers should have
only constant values.
(Not a thorough check for this throughout the codebase, just
StWidget is fixed up in this commit.)
https://bugzilla.gnome.org/show_bug.cgi?id=608746
As of 2a78adc5e3, gobject no longer allows for setting construct-only
properties via g_object_set() during object initialization; set the
properties in a custom constructor instead.
https://bugzilla.gnome.org/show_bug.cgi?id=608802
In some situations we might need to look up an application from
a process identifier, such as the notification system where we
will determine application from the message sender.
By calling clutter_actor_get_allocation() in st_widget_recompute_style()
to determine whether to redraw gradients, we triggered a complete
reallocation of the stage for each gradient.
As gradients are processed in st_widget_real_style_changed() anyway, the
additional checks in st_widget_recompute_style() are redundant and can
be removed altogether.
https://bugzilla.gnome.org/show_bug.cgi?id=608847
On style changes from gradient to solid backgrounds, the new background
must be drawn unconditionally, not depending on whether old and new
background color differ.
https://bugzilla.gnome.org/show_bug.cgi?id=608914
The current way we keep track of skip-paint children is more
difficult than it needs to be, and can lead to subtle bugs.
(For one, the skip-paint state of a child is remembered
when it is removed then added back again, which is completely
unexpected.)
Instead of using weak references to track children, just remove
items from the skip-paint list by overriding the remove() virtual
function of the ClutterContainer interface.
The 'skip_paint' hash table is then destroyed in finalize rather than
dispose since it doesn't hold references to memory any more but just
passively tracks an attribute of the children that are currently in
the container.
https://bugzilla.gnome.org/show_bug.cgi?id=608848
When moving a widget with a gradient, its allocation changes
continuously, resulting in constant redraws.
Checking for actual size changes before the operation avoids
unnecessary redraws.
https://bugzilla.gnome.org/show_bug.cgi?id=608715
The screen recording wasn't working because of two bad interactions
with Cogl:
- Buffered primitives weren't being flushed out
- Cogl changes the pixel store values away from their default values
Thanks for Jon Nettleton for tracking down the source of the
problems with the recorder.
https://bugzilla.gnome.org/show_bug.cgi?id=598390
StButton has an internal animation for the border-image actor, then
it connects to the "completed" signal passing itself as data. However,
if the button is destroyed, nothing prevents the animation's completed
signal from then causing a reference to freed memory.
Holding a reference to the button is the most straightforward fix here.
https://bugzilla.gnome.org/show_bug.cgi?id=607825
Added signal 'screen-size-changed' to ShellGlobal.
Connect to this signal in main.js and run the _relayout() method.
If Overview or calendar are visible when this signal emit, they will be hiding.
https://bugzilla.gnome.org/show_bug.cgi?id=584526
Replace ngettext with dngettext and set the correct translation
domain, so gnome-shell's domain is searched for translations
rather than mutter's.
https://bugzilla.gnome.org/show_bug.cgi?id=597882
Some theme authors have stated interest in radial gradient backgrounds.
The w3c has some draft:
http://dev.w3.org/csswg/css3-images/#radial-gradients
As this is rather complex, we add only some very basic support, which
extends our syntax for linear gradients:
background-gradient-direction: [vertical|horizontal|radial]
Gradients are centered circles, whose size is determined by the closest
side.
https://bugzilla.gnome.org/show_bug.cgi?id=604945
Some changes to the way we handle CSS gradients:
* draw without padding, thus interpreting gradients as part of the
background rather than as content
* clip to (rounded) border area
* draw the border along the gradient instead of trying to align the
gradient layer with the background/border layer
* use the border_image actor instead of the background_image one
https://bugzilla.gnome.org/show_bug.cgi?id=606257
We were holding on to UsageData structure pointers in previously_running,
but those can be purged by the unused app cleanup. Instead just hold
onto dup'd copies of the application id strings.
Add support for a new -st-shadow property, which is based loosely
on the CSS3 box-shadow property:
http://www.css3.info/preview/box-shadow/
It defers from the specification as follows:
* no multiple shadows
* the optional color argument may be placed anywhere
* the shape is not determined by the widget's bounding box,
but by the background-image property
https://bugzilla.gnome.org/show_bug.cgi?id=603691
Change "./src/gnome-shell --create-extension" to use "gnome-open"
when opening the newly created .js file, so that it is launched
with the user's preferred text editor, instead of hardcoding gedit.
In case of duplicate infos structures with the same id, the
info structures we get from looking up the id in app_id_to_info
aren't necessarily the same as those we used to match, so we
can't rely on matching to implicitly initialize info->casefolded_name.
Since the name collation key isn't used in matching results,
just in sorting, init it on-demand in the sorting which is also more
efficient.
Move CSS handling of StLabel and StButton for their underlying
ClutterText objects into st_private, and implement support for
the underline and strikethrough St text-decoration properties.
Overline isn't implemented for lack of a corresponding Pango
attribute, and blink, well...
https://bugzilla.gnome.org/show_bug.cgi?id=599661
Consumer documentation will live at http://live.gnome.org/GnomeShell/Extensions
In terms of implementation; basically we load extensions from the well-known
directories. Add a GConf key to disable extensions by uuid. There is a new
option --create-extension for the gnome-shell script which takes a bit of
interactive input, sets up some sample files, and launches gedit.
No extensions UI in this patch; that will come later.
https://bugzilla.gnome.org/show_bug.cgi?id=599661
The high level goal is to separate the concern of searching for
things with display of those things; for example in newer mockups,
applications are displayed exactly the same as they look in the
AppWell.
Another goal was optimizing for speed; for example,
application search was pushed mostly down into C, and we avoid
lowercasing and normalizing every item over and over.
https://bugzilla.gnome.org/show_bug.cgi?id=603523
