Previously, we connected to notify::strength only if there was
already a signal connected, and the AP changed (thus, by induction,
we never connected). As a result, the icon became stale and different
from that shown inside the menu (which is correctly updated).
https://bugzilla.gnome.org/show_bug.cgi?id=650007
We must look for the actor under the pointer in the whole message tray and not
just in the notification. This will avoid us to capture focus when a
notification comes up with the pointer on the whole tray area.
https://bugzilla.gnome.org/show_bug.cgi?id=661358
Add "Mute"/"Unmute" option to the right click menu for chats to allow muting conversations
without blocking the sender or disabling all non-urgent notifications. Muting a conversation
prevents the pop up of notifications on new messages from the muted source, while these
messages are still available from the summary notification in the message tray.
https://bugzilla.gnome.org/show_bug.cgi?id=659962
SubMenuMenuItems close automatically with their parent, however
closing fails when the parent item is a MenuSection, as those
currently ignore any open()/close() requests.
At some minimal handling by emitting the 'open-state-changed' signal,
so children like SubMenuMenuItems work as expected.
https://bugzilla.gnome.org/show_bug.cgi?id=661029
PopupMenu.firstMenuItem returns a PopupMenuItem, not an apObj. We
need to retrive the latter using the _apObj property.
Also, somehow the property from the number of elements in a menu
was changed from .length to .numMenuItems, and this broke the
destruction of the menu upon emptying it.
https://bugzilla.gnome.org/show_bug.cgi?id=659277
Calling nm_access_point_get_ssid() in the handler of the
access-point-removed signal can result in DBus request, which will
then fail because the object was already removed at the server side.
Instead, use a difference function to retrieve the access point
object (the network), that compares directly by object identity.
https://bugzilla.gnome.org/show_bug.cgi?id=651378
Allow push_modal to optionally only work with a keyboard only grab and
use that in altTab as a fallback to allow switching windows while a pointer grab
is in effect (like during DND operations).
https://bugzilla.gnome.org/show_bug.cgi?id=660457
When two extensions monkey-patch the same area, enable() and disable() may
behave badly and completely wreck things. To solve this, when disabling
an extension, "rebase" the extension list so that monkey patches should be
added and removed in order.
https://bugzilla.gnome.org/show_bug.cgi?id=661815
Rather than loading and enabling all extensions at Shell init time, save some
time and gain some basic security by not loading extensions if they're
not enabled.
https://bugzilla.gnome.org/show_bug.cgi?id=661815
The GFileMonitor on ~/.gtk-bookmarks was block-scoped in the
PlacesManager._init() function, which caused it to be destroyed as soon
as the constructor was done. This caused changes in bookmarks to never
be notified to possible watchers (such as the places-menu extension).
To fix this, the 'monitor' variable has been promoted to an object
instance member.
https://bugzilla.gnome.org/show_bug.cgi?id=661921
When requesting a presence change, the actual presence set by
mission control does not necessarily match the requested presence
(if an active account does not support the requested presence),
which may result in the wrong presence being restored.
As a fix, be more cautious about saving status by assuming that
users do not request presence changes between an automatic presence
change request and the actual change.
https://bugzilla.gnome.org/show_bug.cgi?id=661485
Historically, when applications set "image-data" they expect it to show up
as an icon. So we display it as such if an icon is not specified with an
"app_icon" argument to Notify(). We also use "image-path" for an icon if
an icon is not specified.
We only display a large image specified with "image-data" or "image-path"
if an icon is also specified.
https://bugzilla.gnome.org/show_bug.cgi?id=659158
Users don't expect the bullets they just typed into an entry
field to disappear as soon as they hit enter.
Instead, they want the dialog to become insensitive during the
authentication process, so that it's clear that what they typed
in is being processed.
https://bugzilla.gnome.org/show_bug.cgi?id=657894
The message tray focus grabbing code sets the stage input
mode to Shell.StageInputMode.FOCUSED when the overview is
not visible. This ensures the stage window's input
region gets reshaped to include the notification chrome,
and so that input events get delivered appropriately to
the notification that grabbed focus.
The message tray code never tries to restore the stage input
mode later. Instead, the code relies on the stage input
mode (and input region) getting reset to
shell.StageInputMode.NORMAL automatically when focus moves
back from the shell chrome to a window in the user's session.
It's not really correct to set the stage input mode based
on the overview's visibility, though. At the login screen,
even though no overview is visible, the stage input mode is
Shell.StageInputMode.FULLSCREEN which is sufficient
for the notification's needs, Furthermore,
Shell.StageInputMode.FOCUSED is insufficient for the login
dialog's needs since the login dialog isn't considered
part of the shell's chrome and won't get included in the
stage input region.
This commit changes the message tray code to only set the
stage input mode if the current stage input mode isn't good enough,
rather than assuming the input mode isn't good enough just because
the overview is hidden.
https://bugzilla.gnome.org/show_bug.cgi?id=660919
Because we were sorting the Alt+Tab list by user_time rather than
stacking order / MRU, it was possible for the currently-focused window
to sometimes not be the first app in the list. Fix this by using
meta_display_get_tab_list() to get the proper MRU ordering of windows
on the current workspace, and then convert that to an ordered list of
apps.
https://bugzilla.gnome.org/show_bug.cgi?id=645026
In case _adjustIconSize() is called while the the dash icons are
animating, some extra work is required to yield the expected result.
Skip those extra steps when the icons are not actually animating.
https://bugzilla.gnome.org/show_bug.cgi?id=649248
The current code uses the dash's height and current icon size to
calculate the new icon size. However, the height does not correctly
relate to the icon size while the icons are animating, in which
case the resulting icon size may be wrong.
Rework the function to be independent from the actual icon sizes,
so that a correct size is calculated even when called during an
animation.
https://bugzilla.gnome.org/show_bug.cgi?id=649248
Rather than relying on the caller to hide the remove target and
removed items before calling _adjustIconSize(), move that logic
into _adjustIconSize() itself.
https://bugzilla.gnome.org/show_bug.cgi?id=649248
In case _adjustIconSize() is called while the the dash icons are
animating, some extra work is required to yield the expected result.
Skip those extra steps when the icons are not actually animating.
https://bugzilla.gnome.org/show_bug.cgi?id=649248
Rather than relying on the caller to hide the remove target and
removed items before calling _adjustIconSize(), move that logic
into _adjustIconSize() itself.
https://bugzilla.gnome.org/show_bug.cgi?id=649248
Use ShellEntry.addContextMenu() to add context menus to most
existing entries, with the exception of:
- the login dialog - it may act be used to enter either the
username (e.g. no password entry) or the
password, and copy/paste does not make sense
(nowhere to copy from, nowhere to paste to)
- notifications - while adding a context menu is useful here as
well, it will require changes to the tray's
focus grab handling, so leave those entries
out for now
https://bugzilla.gnome.org/show_bug.cgi?id=659275
Add addContextMenu() to support context menus on right-click/long-press.
Depending on the parameters passed, the context menu only contains
"Copy"/"Paste" actions or an additional "Show/Hide Text" toggle action
for password entries.
https://bugzilla.gnome.org/show_bug.cgi?id=659275
While the ability to show the password can be useful at times,
the existing implementation is problematic:
1) The use of a switch is wrong (as even noted in a code
comment).
2) It is inconsistent with any other password dialog (login screen,
polkit).
In lack of a properly designed solution (for all password dialogs),
the designers agreed to remove the switch for now.
https://bugzilla.gnome.org/show_bug.cgi?id=658948
The keyboard hides prematurely when the user is typing into
an empty search box because the click is a captured event that
triggers a loss of entry focus. By adding a keyboard check to
this event, the problem is solved.
https://bugzilla.gnome.org/show_bug.cgi?id=661340
Currently BoxPointer/Menus always point to the center of the
associated source actor. This is generally what we want, but
add some API to adjust that behavior for the cases where it
isn't.
https://bugzilla.gnome.org/show_bug.cgi?id=659274
Right now we show "(or swipe finger)" at the user login prompt
any time we detect a fingerprint reader.
Checking for the presense of a fingerprint reader isn't really
sufficient for knowing if it is appropriate or not to show the
message, though. Often, a user's fingerprint won't be enrolled
in the system even if the machine has a fingerprint reader.
In this scenario, we end up in a situation where the code will
fade out the message right after fading it in, or worse, fade
out the message while fading it in.
The former case looks flickery and bad, and the latter case
causes the login dialog to lock up since it never completes its
"show prompt" animation and we don't procede with the login
process until after that animation.
If a user is enrolled in the system, the fingerprint pam module
tries to tell the user to swipe their finger. We never show the
user that message because it's redundant with our own "(or swipe
finger)" message and because it uses techy words like "UPEK" and
"TouchStrip".
This commit changes the code to defer showing "(or swipe
finger)" until the fingerprint pam module forwards us its own
message. This makes it less likely we'll show the message when
fingerprint login won't work, and also removes the fingerprint
animation from the critical path "show prompt" animation.
https://bugzilla.gnome.org/show_bug.cgi?id=660492
Nvidia's twin view option does not align monitors properly, but with
a one pixel overlap. It looks safe to ignore an overlap this small
to make this case work.
https://bugzilla.gnome.org/show_bug.cgi?id=661387
js2-mode is no longer developed and we recommend js-mode these days,
so switch the modelines to specify that, and make them consistent
across all files.
https://bugzilla.gnome.org/show_bug.cgi?id=660358
Right-click menus in the dash can be dismissed by clicking anywhere
outside the menu. However, if a window clone is located beneath the
pointer when doing so, the window is activated and the overview
closed.
The cause of this unexpected behavior is that window previews are
activated on button-release, which is delivered to the preview after
the menu releases its grab on button-press. Use a ClutterClickAction
instead and let Clutter do the right thing, i.e. only trigger a
'clicked' signal when a button-release event is matched by a
corresponding button-press event.
https://bugzilla.gnome.org/show_bug.cgi?id=661151
tp-glib can sometimes emit a notify::alias signal when the alias doesn't
actually change. Bail out early instead of pushing an alias change message.
https://bugzilla.gnome.org/show_bug.cgi?id=660774
We now match individuals on other properties than alias, so take
this into account when representing a contact in search results
to avoid having them show up as "Unknown".
https://bugzilla.gnome.org/show_bug.cgi?id=660580
When workspace "previews" in the overview were just tiny gray
rectangles, it made sense to provide a way to move windows
directly between workspaces (by switching workspaces when dragging
a window to the corresponding screen edge). As the overview has
evolved however, the workspace switcher provides a good and
intuitive drop target already, so the alternative provided by the
screen edges is no longer necessary. As it also conflicts with
moving windows between monitors when using a vertical layout,
just remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=660838
The variable |type| doesn't exist here; what we want to do is using the
first member of the contentTypes array instead.
Probably a leftover of some refactoring of the code I did while working
on this.
This patch fixes starting of the default application for a given content
type if the control-center panel is set to run it when a device is
plugged.
https://bugzilla.gnome.org/show_bug.cgi?id=660821
A boxPointer should be able to be attached to any actor, not just ones on the
primary monitor. Assume that the sourceActor doesn't straddle monitors, and
constrain the boxPointer to the monitor the sourceActor is on.
https://bugzilla.gnome.org/show_bug.cgi?id=659861
Originally the keyboard was initialized in the user-session-specific
code, but it was later moved to the generic code. Except that it was
accidentally copied rather than moved.
https://bugzilla.gnome.org/show_bug.cgi?id=659940
Devices are represented as susdut, not susbut (i.e. the percentage
is a double rather than a boolean) - apparently the wrong signature
works, but correct it anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=660122
This ensures that this._clickedSummaryItem is always unset correctly.
Because we disconnect the signals that have _adjustSummaryBoxPointerPosition()
as a callback when unsetting this._clickedSummaryItem, we no longer call
setPosition() on this._summaryBoxPointer after it is hidden. Calling
setPosition() shows the box pointer again, which previously resulted in
an empty box pointer staying behind when a notification associated with
a tray icon was clicked.
https://bugzilla.gnome.org/show_bug.cgi?id=659862
Not doing so is considered as a bug as we don't accept the context right away.
It leads to tp-glib returning directly from the AddDispatchOperation() D-Bus
call and so automatically approve the channel if the Shell is the only
approver running.
https://bugzilla.gnome.org/show_bug.cgi?id=660084
This avoids unnecessarily removing and resetting the icon in the notifications.
This fixes the new chat notification sliding down and up slightly when new
messages are received.
https://bugzilla.gnome.org/show_bug.cgi?id=659768
Previously, when the avatar changed, we would not update the summary icon
for the source at all and would only update the notification icon when the
next message was received. Instead, we should update both immediately upon
recieving the signal that the avatar has changed.
https://bugzilla.gnome.org/show_bug.cgi?id=659768
This code was never tested very well, and has several problems
currently (windows creeping down and to the right, windows snapping to
a different location after you move them). To be fixed in 3.4.
https://bugzilla.gnome.org/show_bug.cgi?id=659643
Clutter 1.4 had a bug where it would wrap when it wasn't supposed to, and we
were unknowingly relying on it. Explicitly pass the available width/height
to get a perfect allocation.
https://bugzilla.gnome.org/show_bug.cgi?id=659633
While we allow for arbitrary modifiers in keybindings, both the
alt-tab and ctrl-alt-tab popups close when ALT is not present in
the modifier mask, resulting in ALT being de-facto hardcoded.
Instead, pass the actual modifier mask when invoking the popups.
https://bugzilla.gnome.org/show_bug.cgi?id=645200
Applying the "dim window" effect to the MetaWindowActor has two avantages:
first it avoids triggering bugs where ClutterOffscreenEffect doesn't handle
clone paint correctly. Second, it avoids showing the window as dimmed in
alt-Tab and the overview, which is weird.
The small downside of this is that the shadow becomes slightly gray when
the window dimmed, which is wrong - if we switched from blending with gray
to a combination of desaturation and darkening, this problem wouldn't
happen.
Revert out the addition of startY to the shader, since we don't need it
and fix the application of alpha, since we need to handle alpha correctly
for the shadow.
https://bugzilla.gnome.org/show_bug.cgi?id=659634
When the active AP disappears, it is possible to receive the
"access-point-removed" signal before the "notify::active-ap" (as
dbus-glib + libnm-glib property notifications are not reliable).
In that case, we would remove the AP from the network object, thus
an attempt to update the UI would create an item for an empty
network.
https://bugzilla.gnome.org/show_bug.cgi?id=658150
Current code is sometime attempting to create menu items for wifi
networks that have no visible AP. I have no idea why this is
happening, but it should fix the symptoms and avoid exceptions.
https://bugzilla.gnome.org/show_bug.cgi?id=658150
The previous wrapping code hardcoded a width in pixels, making it
non-text-zoom-friendly. Specify a CSS width in pts, and fix the
userMenu code to completely opt out of the popupMenu column behavior.
Hack PopupComboBoxMenuItem slightly to deal with the fact that the
pop-up no longer gets setColumnWidth'ed.
https://bugzilla.gnome.org/show_bug.cgi?id=652837
The keyboard status item doesn't derive from SystemStatusButton, since
it doesn't use an icon. But this meant it wasn't getting the right
class name, and so was using the full-width menu title highlight
rather than the small one. Fix that.
Currently entries' 'activate' signal is ignored, so hitting enter
does not have any effect, even if all required information has been
entered.
Instead, connect to the 'activate' signal so that hitting enter
behaves as if the "OK" button had been pressed.
https://bugzilla.gnome.org/show_bug.cgi?id=659133
Currently network dialogs don't focus password entries, which means
that rather than entering their password directly, users first have
to click the entry (or tab around the dialog).
Instead, put keyboard focus on the first entry that requires user
input.
https://bugzilla.gnome.org/show_bug.cgi?id=659133
As dialog buttons used to "steal" the initial key focus, the polkit
dialog delayed focusing the password entry. With buttons no longer
overwriting the manually set focus, this is no longer necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=659133
ModalDialog provides a method to set the initial focus. However,
when adding buttons, the initial focus is always set to the last
button, thus overwriting a previously set manual focus.
Instead, only set the initial key focus if setInitialKeyFocus()
has not been called manually before.
https://bugzilla.gnome.org/show_bug.cgi?id=659133
A menu action may not make sense at any time, so add API to mark
an item insensitive to indicate that its action is currently
unavailable, but may become activatable at a later point.
https://bugzilla.gnome.org/show_bug.cgi?id=659270
Without this, the dim "fade" will start at the top of the untrimmed actor. With
a large enough draggable_border_width setting, this will show no fade at all.
https://bugzilla.gnome.org/show_bug.cgi?id=659302
The way the window dimmer shader is applied will cause rendering errors with
the rounded corners, invisible borders or shaped textures since it doesn't deal
well with the multitexturing used by the MetaShapedTexture. Use an off-screen
buffer to flatten the texture before being applied.
https://bugzilla.gnome.org/show_bug.cgi?id=659302
We don't want the tray bar to open/close quickly when adding a chat because
it happens when user opens the chat from Empathy. The notification will
popup on incoming message anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=657249
In a normal user session you can't have more than one
popup, because the popup is modal and we don't allow
the popup to show up when there are other modals.
In a GDM session, however, the login dialog is modal, and
we want a popup, so we don't have that same check.
This commit changes the ctrlAltTab manager code to not
allow multiple popups.
https://bugzilla.gnome.org/show_bug.cgi?id=659177
Users depend on being able to switch focus between the panel
and the login screen using ctrl-alt-tab.
Because the login screen has no overview, we were short circuiting
some code that needs to get run to support ctrl-alt-tab.
This commit changes the short-circuit code to only run for user
sessions.
https://bugzilla.gnome.org/show_bug.cgi?id=659177
This commit adds the ability to log in with a fingerprint instead
of a password (assuming the user is enrolled and fingerprint
isn't disabled via gsettings)
https://bugzilla.gnome.org/show_bug.cgi?id=657823
If there's no scrollbar in the user list it grows as the
user arrows around. This is because it wasn't taking
padding into account when computing its destination size.
https://bugzilla.gnome.org/show_bug.cgi?id=658469
Making users have to log in to power off the machine isn't a good idea.
This commit adds a power menu similar to the one in the fallback greeter
which offers 3 items:
- Suspend
- Restart
- Power off
https://bugzilla.gnome.org/show_bug.cgi?id=657822
While the current behavior of setting the IM status to "busy" while
notifications are disabled makes sense, as incoming messages are
very likely to be missed, it is not immediately obvious.
Display a transient notification to explain the behavior to the user.
https://bugzilla.gnome.org/show_bug.cgi?id=652718
Simplify the layout in rightBox by getting rid of statusBox, and just
putting everything into rightBox directly.
Simplify the handling of the user menu by adding it like it was a
status icon rather than special-casing it. Rename the "tray_icon"
variables to "status_area" to reflect this better.
https://bugzilla.gnome.org/show_bug.cgi?id=651299
Legacy trayicons are mostly gone, so remove some of the special-casing
for them to simplify things.
Also, fix panel.addToStatusArea() to interpret its "position" relative
to tray_icon_order, not relative to the existing contents of
statusBox, so that the order that extension icons appear in does not
depend on the order they are loaded in.
https://bugzilla.gnome.org/show_bug.cgi?id=651299
The underline highlights on the panel menu items normally have a 100ms
transition between highlighted and unhighlighted, but the panel corner
graphics can't do that, so we hacked the Activities button and user
menu to have no transition. But in gdm mode, the user menu isn't the
rightmost item any more. Fix this by modifying the CSS from the code
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=651299
It does not make a great amount of sense to have this function
on the login screen. And worse, it does not work, since the greeter
is currently a modal dialog, so interaction with the opening
window is impossible.
https://bugzilla.gnome.org/show_bug.cgi?id=659164
The style of the top bar's corners is bound to the style of the
corresponding button; we used to hardcode this association, but
as the login mode does have a different layout, the button is now
determined programmatically.
Unfortunately, some containers take the text direction into account
when ordering their children, while some don't, so the current
code returned the wrong button in RTL locales.
https://bugzilla.gnome.org/show_bug.cgi?id=658983
Commit e5bc3a2ba8 changed the hierarchy of WindowClone, which
broke activating windows on hover during xdnd operations. To
avoid intrusive changes, just hide the new actor from picks so
that DND operations pick the actor actually meant to represent
the corresponding window.
https://bugzilla.gnome.org/show_bug.cgi?id=658640
Pop up a dialog when trying to install an extension so that users are aware
they are installing one. This is a security precaution in the case that an XSS
exploit has been found on the website, which could cause someone to inject a
<script> tag and silently install an extension.
https://bugzilla.gnome.org/show_bug.cgi?id=658612
libsoup won't check for a valid cert by default, so copy some logic from
glib-networking to check against the system cert list. Additionally, allow a
fallback for developers, ~/.local/share/extensions.gnome.org.crt, for easy
local development of the website.
https://bugzilla.gnome.org/show_bug.cgi?id=658870
For those who like their system pure, this provides the ability to purge a
pesky extension and its precious place on your disk space, and in your
"Local Extension" list.
https://bugzilla.gnome.org/show_bug.cgi?id=658612
Conflicts:
js/ui/extensionSystem.js
This ensures that we don't show an animation of an empty blob being hidden when
clicking an action button causes the notification to be destroyed.
https://bugzilla.gnome.org/show_bug.cgi?id=658525
The session list is supposed to hide itself if
1) the user is already logged in
2) there is only one xsession file installed
There was a bug causing 2) not to work.
This commit fixes that bug.
https://bugzilla.gnome.org/show_bug.cgi?id=658423
findUrl() was seeing strings like "You have 1 new message in
foo@example.com/Inbox" and finding the URL
"[http://]example.com/Inbox". Require that URLs either start at the
start of the string, or are preceded by whitespace or an open
paren/quote/etc.
(Since JS doesn't have look-behind assertions like perl does, we have
to actually match the URL-preceding character in the regex, and then
adjust the result findUrl returns accordingly.)
https://bugzilla.gnome.org/show_bug.cgi?id=636252
Although "x:5" could theoretically be a URL with scheme "x" and path
"5", it probably isn't. Only URLify strings that use the "authority"
syntax ("foo://"). (No one ever types out "mailto:" URLs in ordinary
text, so we don't want to match those either.)
https://bugzilla.gnome.org/show_bug.cgi?id=636252
Explode the regex onto multiple lines, and add comments explaining the
pieces. Also, change ()s to (?:)s (non-capturing groups) where
appropriate, and replace the UTF-8 characters with \u escapes so that
they actually work.
https://bugzilla.gnome.org/show_bug.cgi?id=636252
When the keyboard is configured, make lg shorter (if necessary) to
avoid overlapping it.
Also, make a few simplifications to lg's layout code. In particular,
move it into panelBox, to simplify its interactions with the panel.
https://bugzilla.gnome.org/show_bug.cgi?id=657986
The keyboard and tray need to animate together, but they sometimes
need to be in different stacking layers (eg, from the screensaver you
want access to the keyboard, but not the tray). So remove _bottomBox
and just keep trayBox and keyboardBox lined up manually.
https://bugzilla.gnome.org/show_bug.cgi?id=657986
Rather than having a single chrome layer and putting all of the chrome
into that, put the chrome actors directly into uiGroup, so that they
can be stacked independently of one another relative to other actors.
(This requires making uiGroup a ShellGenericContainer, so we can use
skip_paint to avoid painting non-visibleInFullscreen chrome when we're
in fullscreen.)
https://bugzilla.gnome.org/show_bug.cgi?id=657986
The struts were being set while the panel was offscreen (starting its
slide-in animation), and then belatedly getting fixed the next time
something else caused a chrome update. Fix this by setting them before
the animation, and freezing them during the animation.
https://bugzilla.gnome.org/show_bug.cgi?id=657986
Force an allocation at thumbnails creation so we can figure out whether we
need to scroll when selecting.
We also need to show() the whole AltTabPopup before calling _select() so that,
when computing the scrolling offset, the widgets already have their styles
loaded. Otherwise we will miss the switcher list item container's spacing.
https://bugzilla.gnome.org/show_bug.cgi?id=655069
At least for the foreseeable future, the gnome-session desktop
presence won't be used for anything but suppressing (non-urgent)
notifications. To clarify this behavior, rename the "Do Not Disturb"
switch to "Notifications" (and adjust the switch logic accordingly).
https://bugzilla.gnome.org/show_bug.cgi?id=652718
This patch fixes the "apps vanish from alt-TAB bug".
If a "package system" rips away and possibly replaces .desktop files
at some random time, we have historically used inotify to detect this
and reread state (in a racy way, but...). In GNOME 2, this was
generally not too problematic because the menu widget was totally
separate from the list of windows - and the data they operate on was
disjoint as well.
In GNOME 3 we unify these, and this creates architectural problems
because the windows are tied to the app.
What this patch tries to do is, when rereading the application state,
if we have a running application, we keep that app around instead of
making a new instance. This ensures we preserve any state such as the
set of open windows.
This requires moving the running state into ShellAppSystem. Adjust
callers as necessary, and while we're at it drop the unused "contexts"
stuff.
This is just a somewhat quick band-aid; a REAL fix would require us
having low-level control over application installation. As long as
we're on top of random broken tar+wget wrappers, it will be gross.
A slight future improvement to this patch would add an explicit
"merge" between the old and new data. I think probably we always keep
around the ShellApp corresponding to a given ID, but replace its
GMenuTreeEntry.
https://bugzilla.gnome.org/show_bug.cgi?id=657990
As extensions are now expected to provide a "disable" function,
they need to remove search providers they added. Implement the
removal functionality and add a public removeSearchProvider()
method.
https://bugzilla.gnome.org/show_bug.cgi?id=657548
We keep track of presence changes by connecting to the
Tp.AccountManager:most-available-presence-changed signal.
However, if multiple accounts are in use, telepathy may
lie to us and emit the signal even when the most available
presence is unchanged.
Work around this by keeping track of the current presence
ourselves.
https://bugzilla.gnome.org/show_bug.cgi?id=657703
Some search providers may want to change their results, or may not
want to block on an external service to get their results (DBus, etc.)
Set up an infrastructure to allow search providers to add their search
results at a later time.
Based on a patch by Jasper St. Pierre and Seif Lotfy.
https://bugzilla.gnome.org/show_bug.cgi?id=655220
This adds contacts search to shell, powered by libfolks.
Changes:
- Add Folks and Gee to the build system
- ShellContactSystem, a backend in C
- ContactDisplay, search frontend in JS
https://bugzilla.gnome.org/show_bug.cgi?id=643018
The current user status menu allow to set the session status,
which also influences the IM status when signed in with
mission-control. However, the way it is presented to the user
makes it hard to figure out how the statuses interact or that
there are two distinct status in the first place.
Therefore, use a separate control for each status, and update the
overall look to match gnome-contacts.
https://bugzilla.gnome.org/show_bug.cgi?id=652837
Given that our menus contain at most two columns, all switch widgets
in menus end up in the last columns, and thus aligned with the right
menu edge.
However, the updated user status menu will contain a section which
ignores the menu's column layout, so the switch might end up in
the middle of the menu if the overall width is determined by said
section.
At least for now, we always want the switch to align with the end,
so just expand switch menu items rather than adding an option.
https://bugzilla.gnome.org/show_bug.cgi?id=652837
Introduce a new menu widget, which displays the active item from
a set of options, and pops up a child menu to allow changing the
active item when activated.
https://bugzilla.gnome.org/show_bug.cgi?id=652837
Allow opening a popup menu from another menu. While the child menu
is open, events on the parent menu are blocked. The parent menu
is kept open when the child menu is closed; the child menu on the
other hand is closed with the parent, e.g. when the focus moves
to another toplevel menu.
This feature will be used to implement combo box menu items.
https://bugzilla.gnome.org/show_bug.cgi?id=652837
We haven't actually been calling the top-right menu "status menu" for
quite some time, so use the upcoming code changes as an excuse for
renaming it to "user menu".
Doing this rather than overdrawing a black rectangle saves us
(pixels in screen) * 8 bytes of memory bandwidth for every frame we draw going
into the overview.
It also allows us to dim the background on non-primary monitors making the
overall overview appearance consistent across all monitors.
https://bugzilla.gnome.org/show_bug.cgi?id=656433
Instances of this class share a single CoglTexture behind the scenes which
allows us to show the background with different rendering options without
duplicating the texture data.
https://bugzilla.gnome.org/show_bug.cgi?id=656433
This commit adds GDM session support.
It provides a user list that talks to GDM,
handles authentication via PAM, etc.
It doesn't currently support fingerprint readers
and smartcards.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
The shell has a number of things that are only relevant for
logged in users (e.g. calendar events, telepathy integration, a
user menu, etc).
This commit moves those user session specific bits into their
own functions in preparation for making the shell code ready
for use at login time.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
Right now the panel code makes the left corner sync up with the
activities button and the right corner sync up with the user menu.
This is fine as long as we have an activities button and a user menu.
The login screen won't have those things, though.
This commit changes the panel corner code to try to figure out which
interface element is the most appropriate to sync up with based on
its position in the panel.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
Images are part of the notification spec, so we should support them.
Marina Zhurakhinskaya provided some code for getting the layout right
for this patch.
https://bugzilla.gnome.org/show_bug.cgi?id=621009
Have LayoutManager automatically deal with sizing and positioning
boxes for the panel and messageTray relative to the monitors.
Also, now that LayoutManager knows exactly where and how tall the
panel and tray are, have it manage the pointer barriers as well.
https://bugzilla.gnome.org/show_bug.cgi?id=612662
In order for transformation animations to look good, they need to be
incremental and have some order to them (e.g., fade out hidden items,
then shrink to close the void left over).
Chaining animations in this way can be error prone and wordy using just
Tweener callbacks.
This commit adds a new set of classes to help:
- Task. encapsulates schedulable work to be run in a specific scope.
- ConsecutiveBatch. runs a series of tasks in order and completes
when the last in the series finishes.
- ConcurrentBatch. runs a set of tasks at the same time and completes
when the last to finish completes.
- Hold. prevents a batch from completing the pending task until
the hold is released.
The tasks associated with a batch are specified in a list at batch
construction time as either task objects or plain functions.
Batches are task objects, themselves, so they can be nested.
For now, these APIs are temporarily getting staged in a gdm/ specific
subdirectory so they will be available for use by GDM. They aren't
specific to GDM, or even to doing animations, though, so the API may eventually
move in some form or another to a more general location. Alternatively, the
APIs may ultimately get dropped entirely and replaced by something else.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
A modal dialog in the shell blocks anything but that dialog from
receiving user input. Applications within the session and other
parts of UI are rendered non-reactive.
When GDM gets changed to use the shell for its greeter, the user
list will be presented as a shell dialog. That dialog shouldn't
block access to the panel menus, etc.
This commit adds a shellReactive property that makes the ModalDialog
class continue to block access to applications, but allow the user
to interact with the shell itself.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
The control-center contains user-pertinent settings
panels. These panels don't make sense to show outside
of a user's session, so hide them for session types other
than SessionType.USER.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
We're not going to want an overview at the login screen,
but a lot of code in the shell depends on the overview
existing.
This commit adds a new isDummy constructor property to
allow creating the overview as a non-functional, stub object
that doesn't do anything visible.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
The dash object is currently exposed as a public object.
It's only used outside of the overview for the dash object's
iconSize property though.
This commit makes the dash object private and proxies the dash
iconSize property to the overview.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
Right now, when a user clicks on the panel clock, a menu pops up with a
calendar and a list of events from the user's schedule. The list of
events only makes sense from within a user's session, however.
As part of the prep work for making the shell a platform for the login
screen, this commit makes the events list optional.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
The theme currently hard codes the minimum size of the calendar
menu to make sure there's a designated area for events
(even if there isn't anything currently scheduled).
A side-effect of the hard coded minimum width is that
if the events area is hidden, the menu ends up much
bigger than the calendar. We don't currently ever hide
the events area, but we will in the future.
This commit moves the min-width restriction from the menu
specifically to the events area.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
The chrome layer contains the user interface elements (e.g.,
the panel) that disappear when fullscreen windows get displayed.
Panel menus are currently put in the chrome layer, but don't need
to be, since they are only displayed when the user is interacting
with the shell and not a fullscreen application.
Putting panel menus in the chrome layer does mean they will get
stacked below shell interface elements that aren't in the chrome layer,
though.
This commit changes panel menus to be on the same layer as most other
shell elements, so they get properly stacked above those elements.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
Right now, if buttons get set on a dialog after it is mapped,
they just pop in instantly.
We shouldn't have any harsh transitions like that, though.
This commit changes the buttons to quickly fade in, instead.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
All the system status menus in the panel offer a
menu item to jump to a relevant part of the
control-center.
This means each status icon has the same, or nearly the
same bit of code to:
- Add a new "action" menu item and listen for its activation.
- Hide the overview if it's showing when the menu item is activated
- Find the relevant control-center panel from its desktop file
- Launch the control-center to the relevant panel
This commit consolidates all those details in a new method,
addSettingsAction. This refactoring reduces code duplication and
slight inconsistencies in the code resulting from that duplication.
It will also make it easier in subsequent commits to hide settings menu
items when the shell is used in the login screen.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
A separator only makes sense if there are items on both
sides of it. There is quite a lot of code written
throughout the shell that manages the process of showing
and hiding separators as the items around those separators
change.
This commit drops all that code in favor of changes to the menu
implementation to dynamically hide or show separators as
appropriate, so the callers don't have to deal with it.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
Wireless and 3g dialog code has moved to gnome-control-center, so
we can stop calling out to nm-applet. Also, we can now enable the
notifications provided by the shell and kill a bit of code about
auth that is not actually needed.
https://bugzilla.gnome.org/show_bug.cgi?id=650244
Using the new ShellNetworkAgent, show a system modal dialog
(similar to the PolicyKit one) when NetworkManager needs secrets
for connecting to wireless.
https://bugzilla.gnome.org/show_bug.cgi?id=650244
The order of indicators depends on the order of calls to
Panel.addToStatusArea. To have it consistent across enabling and
disabling of extensions, we need to place the core ones first.
https://bugzilla.gnome.org/show_bug.cgi?id=653205
This way all standard indicators have a shell implementation
provided, which prevents issues with extensions enabling/disabling
(in particular with xrandr-indicator)
https://bugzilla.gnome.org/show_bug.cgi?id=653205
Extensions often want to add items to the system status area, so it
is useful to add a convenience API for it. Also, we now allow
for cleaner destruction of panel objects, by just calling destroy()
on it.
Based on a patch by Jasper St. Pierre.
https://bugzilla.gnome.org/show_bug.cgi?id=653205
The "id" variable was being sporadically reset to null, and as far as
Florian and I could determine, this is actually a Spidermonkey bug.
The issue has something to do with:
1) use of "let" for the variable
2) Nesting a dynamic closure inside of a for() loop
Work around it here for now - I tried to create a minimized test case
to hand to the Spidermonkey developers, but failed. A big part of
the problem is it's only sporadically reproducible.
Direction containers group all contiguous messages in the same direction into
their own parent container, allowing for smarter styling of similar messages.
https://bugzilla.gnome.org/show_bug.cgi?id=640271
This adds a new DBus method: InstallExtensionRemote(uuid : s, url : s)
Pass it the UUID of an extension and the URL of a manifest file: the same as a
metadata.json, but with a special key, '__installer', which is an HTTP location
that points to an zip file containing the extension. The Shell will download
and use it to install the extension. In the future, the manifest file may be
used to automatically detect and install updates.
https://bugzilla.gnome.org/show_bug.cgi?id=654770
The two similar keys were hard to manipulate to have specific effects, so just
remove one. Now there is an *explicit* whitelist: all extensions must be in the
'enabled-extensions' for them to be loaded.
https://bugzilla.gnome.org/show_bug.cgi?id=654770
It's generally more useful to see when a person sent a message instead of when
we received it. Also, a recent change in Telepathy made the received timestamp
be 0 for messages we send.
https://bugzilla.gnome.org/show_bug.cgi?id=640271
Adds methods to shell_global to allow taking screenshots
save the result into a specified png image.
It exposes three methods via shellDBus applications like
gnome-screenshot:
*) Screenshot (screenshots the whole screen)
*) ScreenshotWindow (screenshots the focused window)
*) ScreenshotArea (screenshots a specific area)
https://bugzilla.gnome.org/show_bug.cgi?id=652952
It is not possible to connect to hidden access points without
knowing the SSID, and it should be done using the control center
panel and the appropriate dialog. At the same time, this should
fix some warnings from libnm-glib and dbus-glib.
https://bugzilla.gnome.org/show_bug.cgi?id=646454
The shell should only notify in case no other client handles the message.
Empathy will ack the message if focused, so we don't want to step on its
toes.
Use the existing setting
org.gnome.desktop.default-applications.office.calendar.exec
as calendar application instead of the hard-coded evolution. Evolution
is still the fallback if that setting is cleared (it defaults to
evolution).
https://bugzilla.gnome.org/show_bug.cgi?id=651190
Since almost all of the callers of shell_app_activate were using the
default workspace (by passing -1), remove that parameter.
Add a new shell_app_activate_full() API which takes a workspace as
well as a timestamp; previously we might have been ignoring event
timestamps from elsewhere.
https://bugzilla.gnome.org/show_bug.cgi?id=648149
This dramatically thins down and sanitizes the application code.
The ShellAppSystem changes in a number of ways:
* Preferences are special cased more explicitly; they aren't apps,
they're shortcuts for an app), and we don't have many of them, so
don't need e.g. the optimizations in ShellAppSystem for searching.
* get_app() changes to lookup_app() and returns null if an app isn't
found. The semantics where it tried to find the .desktop file
if we didn't know about it were just broken; I am pretty sure no
caller needs this, and if they do we'll fix them.
* ShellAppSystem maintains two indexes on apps (by desktop file id
and by GMenuTreeEntry), but is no longer in the business of
dealing with GMenuTree as far as hierarchy and categories go. That
is moved up into js/ui/appDisplay.js. Actually, it flattens both
apps and settings.
Also, ShellWindowTracker is now the sole reference-owner for
window-backed apps. We still do the weird "window:0x1234beef" id
for these apps, but a reference is not stored in ShellAppSystem.
The js/ui/appDisplay.js code is rewritten, and sucks a lot less.
Variable names are clearer:
_apps -> _appIcons
_filterApp -> _visibleApps
_filters -> _categoryBox
Similarly for function names. We no longer call (for every app) a
recursive lookup in GMenuTree to see if it's in a particular section
on every category switch; it's all cached.
NOTE - this intentionally reverts the incremental loading code from
commit 7813c5b93f. It's fast enough
here without that.
https://bugzilla.gnome.org/show_bug.cgi?id=648149
Add a helper function (mostly copied from gtkcalendar.c) for getting
the first week day for the current locale, using nl_langinfo if
available and falling back to the GTK+ gettext fallback otherwise.
Use that function in the calendar, so that the LC_TIME setting is
used if possible.
https://bugzilla.gnome.org/show_bug.cgi?id=649078
Instead, create three ripples and keep tweening them. This gives a dramatic
speedup when entering the overview, but means that we can't have the same animation
running twice. In this case, we "reset" the currently running ripple animation, but
it is hard to notice unless looking for it.
https://bugzilla.gnome.org/show_bug.cgi?id=656125
Extension developers may be confused about why their extensions aren't working:
the LookingGlass isn't a very obvious place, or even which errors are theirs.
To remedy this, save all errors per-UUID which allows them to be retrieved
later.
https://bugzilla.gnome.org/show_bug.cgi?id=654770
Add ShellVersion, designed for detecting OUT_OF_DATE extensions so they can't
be installed, as well as ApiVersion, designed for backwards-compatibility with
the SweetTooth web-app, which must support all shell versions.
https://bugzilla.gnome.org/show_bug.cgi?id=654770
GetExtensionInfo() takes a UUID and returns a JSON object with information
about that extension including their metadata, path and current state.
ListExtensions() takes no arguments and returns a JSON object mapping UUIDs
to the same information objects described above.
https://bugzilla.gnome.org/show_bug.cgi?id=654770
As an effort to prevent a string freeze to land timestamps on 3.0, we reused
translations for the calendar. Now that the string freeze is long gone, make
some proper strings.
https://bugzilla.gnome.org/show_bug.cgi?id=640271
The notification spec supports the concept of a 'default' action:
"The default action (usually invoked my clicking the notification)
should have a key named "default". The name can be anything, though
implementations are free not to display it."
Support this by invoking the 'default' action rather than a emitting
the 'clicked' signal when clicking notifications which specifie a
default action.
Also don't add an action button for the default action.
https://bugzilla.gnome.org/show_bug.cgi?id=655818
LayoutManager and Chrome are already somewhat intertwined and will be
becoming more so. As a first step in merging them, move the Chrome
object into layout.js (with no other code changes).
https://bugzilla.gnome.org/show_bug.cgi?id=655813
Looking Glass is supposed to slide out from underneath the panel.
Rather than fiddling with Main.chrome.actor directly, just add the lg
actor to the chrome, and fix its stacking there.
https://bugzilla.gnome.org/show_bug.cgi?id=655813
With the old pre-boxpointer summary notifications, it sort of made
sense that the summary notification actor was a child of the message
tray. But there's no reason for that now, and in fact, it ends up
requiring special cases in some places since hovering over the summary
notification counts as hovering over the tray. So, fix this.
https://bugzilla.gnome.org/show_bug.cgi?id=655813
Rather than having the panel corners as independent bits of chrome and
manually syncing their positions, put them inside the panel actor, and
update the panel's allocation code to position them correctly.
https://bugzilla.gnome.org/show_bug.cgi?id=655813
The buttons should have a glassy transparent look. Also, they should not
be as tall, should light up on hover, and their labels should be white
in order to stand out. Making the labels solid white requires removing the
transparency set in modalDialog.js. Also, add a separate color setting
for the dialog as a whole - this avoids having a white icon.
https://bugzilla.gnome.org/show_bug.cgi?id=655428
The specs call for a 2 pixel gap between the panel and its menus,
though we need to specify this as 4 pixels, since it's relative to the
bottom of the icon/title, not the bottom of the panel (up until now,
the point of the menu arrow was actually overlapping the menu's
highlight underline).
Also, move the gap specification into the CSS, since it makes more
sense there.
https://bugzilla.gnome.org/show_bug.cgi?id=655627
Since this link in the keyboard menu points to Region and Language
Settings in System Settings, we should be consistent and use that
term instead of "Localization Settings"
Also, this removes ellipsis from "Show Keyboard Layout" since it
doesn't require further input.
https://bugzilla.gnome.org/show_bug.cgi?id=652984
The current check for fullscreen windows ignores the window's
minimization state, so that chrome which is hidden in fullscreen
will always hide if the window on top of the window stack is
fullscreen, even if it is actually minimized.
Instead, skip minimized windows when looking for fullscreen windows.
https://bugzilla.gnome.org/show_bug.cgi?id=655446
_fixMarkup() was supposed to be ensuring that the markup we passed to
clutter was correct, but it was validating the syntax incorrectly, and
wasn't checking that the markup was valid (or even well-formed). This
is bad because if you pass bad pango markup to
clutter_text_set_markup(), it will g_warn and drop the string on the
floor.
Fix by fixing up the regexps, and then calling Pango.parse_markup() on
the result, and just xml-escaping everything if parse_markup() fails.
https://bugzilla.gnome.org/show_bug.cgi?id=650298
Keeping the volume menu open after setting the desired volume isn't that
useful and forces a second click (or an Esc press) to dismiss it. Allow for
the sliders to be used with a single click-hold-move-release.
https://bugzilla.gnome.org/show_bug.cgi?id=649586
Move the HotCorner class from panel to layout, and make the panel
manage its own HotCorner.
Stick the panel's HotCorner into the Activities button actor (rather
than separately floating above it), so that hover tracking on the
button works properly without needing hacks in HotCorner.
https://bugzilla.gnome.org/show_bug.cgi?id=645759
The fact that everything in the top bar except the activities button
was a menu made various things difficult. Simplify this by making the
activities button be a menu too, but just hack it up a bit so that the
menu associated with the button never actually appears.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=645759 (Clicking on
Activities with menu up leaves a funny state) and its semi-dup 641253
(panel keynav between Activities and menus is quirky).
visibleInOverview chrome was visible even when the screensaver was
active. Although we may eventually need visibleInScreenSaver, that
should be a separate flag.
Fix this by tracking the screensaver active state, and hiding the chrome
when the screensaver is active.
https://bugzilla.gnome.org/show_bug.cgi?id=654550
Fix the signal handling; you can't use this.connect('ActiveChanged')
to connect to a D-Bus signal after replacing the signal methods with
the lang.signals versions. Just leave it using the D-Bus signal names,
just like it uses the D-Bus method names.
Also, remove the "_" from "_screenSaverActive", to match what
AutomountManager checks for, and remove getActive(), since it's not
needed.
https://bugzilla.gnome.org/show_bug.cgi?id=654550
