clean up unused recipes

meta-citadel/recipes-core/coreutils/coreutils/0001-local.mk-fix-cross-compiling-problem.patch

@@ -1,26 +0,0 @@
-Subject: local.mk: fix cross compiling problem
-
-We meet the following error when cross compiling.
-| Makefile:3418: *** Recursive variable 'INSTALL' references itself (eventually).  Stop.
-This patch fixes this problem.
-
-Upstream-Status: Pending
-
-Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
----
- src/local.mk | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/src/local.mk b/src/local.mk
-index 36dfa4e..c5898cc 100644
---- a/src/local.mk
-+++ b/src/local.mk
-@@ -649,4 +649,4 @@ cu_install_program = @INSTALL_PROGRAM@
- else
- cu_install_program = src/ginstall
- endif
--INSTALL = $(cu_install_program) -c
-+INSTALL_PROGRAM = $(cu_install_program)
--- 
-2.1.0
-

meta-citadel/recipes-core/coreutils/coreutils/0001-uname-report-processor-and-hardware-correctly.patch

@@ -1,64 +0,0 @@
-Upstream-Status: Denied
-
-Subject: uname: report processor and hardware correctly
-
-This patch is rejected by coreutils upstream, but distros like debian and fedora
-uses this patch to make `uname -i' and `uname -p' to not report 'unknown'.
-
-Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
----
- src/uname.c | 18 ++++++++++++++++--
- 1 file changed, 16 insertions(+), 2 deletions(-)
-
-diff --git a/src/uname.c b/src/uname.c
-index 39bd28c..c84582d 100644
---- a/src/uname.c
-+++ b/src/uname.c
-@@ -299,13 +299,19 @@ main (int argc, char **argv)
- 
-   if (toprint & PRINT_PROCESSOR)
-     {
--      char const *element = unknown;
-+      char *element = unknown;
- #if HAVE_SYSINFO && defined SI_ARCHITECTURE
-       {
-         static char processor[257];
-         if (0 <= sysinfo (SI_ARCHITECTURE, processor, sizeof processor))
-           element = processor;
-       }
-+#else
-+      {
-+	static struct utsname u;
-+	uname(&u);
-+	element = u.machine;
-+      }
- #endif
- #ifdef UNAME_PROCESSOR
-       if (element == unknown)
-@@ -343,7 +349,7 @@ main (int argc, char **argv)
- 
-   if (toprint & PRINT_HARDWARE_PLATFORM)
-     {
--      char const *element = unknown;
-+      char *element = unknown;
- #if HAVE_SYSINFO && defined SI_PLATFORM
-       {
-         static char hardware_platform[257];
-@@ -361,6 +367,14 @@ main (int argc, char **argv)
-           if (sysctl (mib, 2, hardware_platform, &s, 0, 0) >= 0)
-             element = hardware_platform;
-         }
-+#else
-+      {
-+	static struct utsname u;
-+	uname(&u);
-+	element = u.machine;
-+	if(strlen(element)==4 && element[0]=='i' && element[2]=='8' && element[3]=='6')
-+	  element[1]='3';
-+      }
- #endif
-       if (! (toprint == UINT_MAX && element == unknown))
-         print_element (element);
--- 
-1.9.1
-

meta-citadel/recipes-core/coreutils/coreutils/disable-ls-output-quoting.patch

@@ -1,49 +0,0 @@
-Subject: revert inconsistent ls quoting
-
-This is a revert of upstream commit 109b9220cead6e979d22d16327c4d9f8350431cc.
-
-Bug-Debian: https://bugs.debian.org/813164
-
-Upstream-Status: Submitted
-
-Originally-by: Adam Borowski <kilobyte@angband.pl>
-[PG: patch from https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=813164#78 ]
-Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
----
-
---- coreutils-8.25.orig/NEWS
-+++ coreutils-8.25/NEWS
-@@ -71,9 +71,6 @@ GNU coreutils NEWS
-   df now prefers sources towards the root of a device when
-   eliding duplicate bind mounted entries.
- 
--  ls now quotes file names unambiguously and appropriate for use in a shell,
--  when outputting to a terminal.
--
-   join, sort, uniq with --zero-terminated, now treat '\n' as a field delimiter.
- 
- ** Improvements
---- coreutils-8.25.orig/doc/coreutils.texi
-+++ coreutils-8.25/doc/coreutils.texi
-@@ -7750,8 +7750,8 @@ this"} in the default C locale.  This lo
- 
- You can specify the default value of the @option{--quoting-style} option
- with the environment variable @env{QUOTING_STYLE}@.  If that environment
--variable is not set, the default value is @samp{shell-escape} when the
--output is a terminal, and @samp{literal} otherwise.
-+variable is not set, the default value is @samp{literal}, but this
-+default may change to @samp{shell} in a future version of this package.
- 
- @item --show-control-chars
- @opindex --show-control-chars
---- coreutils-8.25.orig/src/ls.c
-+++ coreutils-8.25/src/ls.c
-@@ -1581,7 +1581,6 @@ decode_switches (int argc, char **argv)
-       if (isatty (STDOUT_FILENO))
-         {
-           format = many_per_line;
--          set_quoting_style (NULL, shell_escape_quoting_style);
-           /* See description of qmark_funny_chars, above.  */
-           qmark_funny_chars = true;
-         }

meta-citadel/recipes-core/coreutils/coreutils/fix-selinux-flask.patch

@@ -1,39 +0,0 @@
-From a1d360509fa3a4aff57eedcd528cc0347a87531d Mon Sep 17 00:00:00 2001
-From: Robert Yang <liezhi.yang@windriver.com>
-Date: Tue, 16 Sep 2014 01:59:08 -0700
-Subject: [PATCH] gnulib-comp.m4: selinux/flask.h should respect to
- with_selinux
-
-Fixed when build with meta-selinux even when --without-selinux:
-runcon.c:49:28: fatal error: selinux/flask.h: No such file or directory
- # include <selinux/flask.h>
-                            ^
-compilation terminated.
-
-Upstream-Status: Pending
-
-Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
----
- m4/gnulib-comp.m4 |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/m4/gnulib-comp.m4 b/m4/gnulib-comp.m4
-index 472d3a0..5f09734 100644
---- a/m4/gnulib-comp.m4
-+++ b/m4/gnulib-comp.m4
-@@ -1730,11 +1730,11 @@ AC_DEFUN([gl_INIT],
-     AC_LIBOBJ([select])
-   fi
-   gl_SYS_SELECT_MODULE_INDICATOR([select])
--  AC_CHECK_HEADERS([selinux/flask.h])
-   AC_LIBOBJ([selinux-at])
-   gl_HEADERS_SELINUX_SELINUX_H
-   gl_HEADERS_SELINUX_CONTEXT_H
-   if test "$with_selinux" != no && test "$ac_cv_header_selinux_selinux_h" = yes; then
-+    AC_CHECK_HEADERS([selinux/flask.h])
-     AC_LIBOBJ([getfilecon])
-   fi
-   gl_SERVENT
--- 
-1.7.9.5
-

meta-citadel/recipes-core/coreutils/coreutils/remove-usr-local-lib-from-m4.patch

@@ -1,31 +0,0 @@
-We have problem using hardcoded directories like /usr/local here
-which will be checked for cross builds. This is a special case which
-is valid for AIX only. We do not have AIX as one of our supported
-build host or target. Therefore we get rid of the hardcoded paths
-and make life easier for cross compilation process.
-
-Signed-off-by: Khem Raj <raj.khem@gmail.com>
-
-Upstream-Status: Inappropriate [Upstream does care for AIX while we may not]
-
-Index: coreutils-8.14/m4/getloadavg.m4
-===================================================================
---- coreutils-8.14.orig/m4/getloadavg.m4	2011-09-19 08:09:24.000000000 -0700
-+++ coreutils-8.14/m4/getloadavg.m4	2011-10-19 21:42:00.385533357 -0700
-@@ -41,16 +41,6 @@
-        [LIBS="-lutil $LIBS" gl_func_getloadavg_done=yes])
-    fi
- 
--   if test $gl_func_getloadavg_done = no; then
--     # There is a commonly available library for RS/6000 AIX.
--     # Since it is not a standard part of AIX, it might be installed locally.
--     gl_getloadavg_LIBS=$LIBS
--     LIBS="-L/usr/local/lib $LIBS"
--     AC_CHECK_LIB([getloadavg], [getloadavg],
--                  [LIBS="-lgetloadavg $LIBS" gl_func_getloadavg_done=yes],
--                  [LIBS=$gl_getloadavg_LIBS])
--   fi
--
-    # Set up the replacement function if necessary.
-    if test $gl_func_getloadavg_done = no; then
-      HAVE_GETLOADAVG=0

meta-citadel/recipes-core/coreutils/coreutils_8.30.bb

@@ -1,139 +0,0 @@
-SUMMARY = "The basic file, shell and text manipulation utilities"
-DESCRIPTION = "The GNU Core Utilities provide the basic file, shell and text \
-manipulation utilities. These are the core utilities which are expected to exist on \
-every system."
-HOMEPAGE = "http://www.gnu.org/software/coreutils/"
-BUGTRACKER = "http://debbugs.gnu.org/coreutils"
-LICENSE = "GPLv3+"
-LIC_FILES_CHKSUM = "file://COPYING;md5=d32239bcb673463ab874e80d47fae504\
-                    file://src/ls.c;beginline=1;endline=15;md5=dbe356a88b09c29232b083d1ff8ac82a"
-DEPENDS = "gmp libcap"
-DEPENDS_class-native = ""
-
-inherit autotools gettext texinfo
-
-SRC_URI = "${GNU_MIRROR}/coreutils/${BP}.tar.xz \
-           file://remove-usr-local-lib-from-m4.patch \
-           file://fix-selinux-flask.patch \
-           file://0001-uname-report-processor-and-hardware-correctly.patch \
-           file://disable-ls-output-quoting.patch \
-           file://0001-local.mk-fix-cross-compiling-problem.patch \
-          "
-
-SRC_URI[md5sum] = "ab06d68949758971fe744db66b572816"
-SRC_URI[sha256sum] = "e831b3a86091496cdba720411f9748de81507798f6130adeaef872d206e1b057"
-
-EXTRA_OECONF_class-native = "--without-gmp"
-EXTRA_OECONF_class-target = "--enable-install-program=arch,hostname --libexecdir=${libdir}"
-EXTRA_OECONF_class-nativesdk = "--enable-install-program=arch,hostname"
-
-# acl and xattr are not default features
-#
-PACKAGECONFIG_class-target ??= "\
-    ${@bb.utils.filter('DISTRO_FEATURES', 'acl xattr', d)} \
-"
-
-# The lib/oe/path.py requires xattr
-PACKAGECONFIG_class-native ??= "xattr"
-
-# with, without, depends, rdepends
-#
-PACKAGECONFIG[acl] = "--enable-acl,--disable-acl,acl,"
-PACKAGECONFIG[xattr] = "--enable-xattr,--disable-xattr,attr,"
-PACKAGECONFIG[single-binary] = "--enable-single-binary,--disable-single-binary,,"
-
-# [ df mktemp nice printenv base64 gets a special treatment and is not included in this
-bindir_progs = "arch basename chcon cksum comm csplit cut dir dircolors dirname du \
-                env expand expr factor fmt fold groups head hostid id install \
-                join link logname md5sum mkfifo nl nohup nproc od paste pathchk \
-                pinky pr printf ptx readlink realpath runcon seq sha1sum sha224sum sha256sum \
-                sha384sum sha512sum shred shuf sort split stdbuf sum tac tail tee test timeout \
-                tr truncate tsort tty unexpand uniq unlink uptime users vdir wc who whoami yes"
-
-# hostname gets a special treatment and is not included in this
-base_bindir_progs = "cat chgrp chmod chown cp date dd echo false hostname kill ln ls mkdir \
-                     mknod mv pwd rm rmdir sleep stty sync touch true uname stat"
-
-sbindir_progs= "chroot"
-
-# Let aclocal use the relative path for the m4 file rather than the
-# absolute since coreutils has a lot of m4 files, otherwise there might
-# be an "Argument list too long" error when it is built in a long/deep
-# directory.
-acpaths = "-I ./m4"
-
-# Deal with a separate builddir failure if src doesn't exist when creating version.c/version.h
-do_compile_prepend () {
-	mkdir -p ${B}/src
-}
-
-do_install_class-native() {
-	autotools_do_install
-	# remove groups to fix conflict with shadow-native
-	rm -f ${D}${STAGING_BINDIR_NATIVE}/groups
-	# The return is a must since native doesn't need the
-	# do_install_append() in the below.
-	return
-}
-
-do_install_append() {
-	for i in df mktemp nice printenv base64; do mv ${D}${bindir}/$i ${D}${bindir}/$i.${BPN}; done
-
-	install -d ${D}${base_bindir}
-	[ "${base_bindir}" != "${bindir}" ] && for i in ${base_bindir_progs}; do mv ${D}${bindir}/$i ${D}${base_bindir}/$i.${BPN}; done
-
-	install -d ${D}${sbindir}
-	[ "${sbindir}" != "${bindir}" ] && for i in ${sbindir_progs}; do mv ${D}${bindir}/$i ${D}${sbindir}/$i.${BPN}; done
-
-	# [ requires special handling because [.coreutils will cause the sed stuff
-	# in update-alternatives to fail, therefore use lbracket - the name used
-	# for the actual source file.
-	mv ${D}${bindir}/[ ${D}${bindir}/lbracket.${BPN}
-}
-
-inherit update-alternatives
-
-ALTERNATIVE_PRIORITY = "100"
-# Make hostname's priority higher than busybox but lower than net-tools
-ALTERNATIVE_PRIORITY[hostname] = "90"
-ALTERNATIVE_${PN} = "lbracket ${bindir_progs} ${base_bindir_progs} ${sbindir_progs} base64 nice printenv mktemp df"
-ALTERNATIVE_${PN}-doc = "base64.1 nice.1 mktemp.1 df.1 groups.1 kill.1 uptime.1 stat.1 hostname.1"
-
-ALTERNATIVE_LINK_NAME[hostname.1] = "${mandir}/man1/hostname.1"
-
-ALTERNATIVE_LINK_NAME[base64] = "${base_bindir}/base64"
-ALTERNATIVE_TARGET[base64] = "${bindir}/base64.${BPN}"
-ALTERNATIVE_LINK_NAME[base64.1] = "${mandir}/man1/base64.1"
-
-ALTERNATIVE_LINK_NAME[mktemp] = "${base_bindir}/mktemp"
-ALTERNATIVE_TARGET[mktemp] = "${bindir}/mktemp.${BPN}"
-ALTERNATIVE_LINK_NAME[mktemp.1] = "${mandir}/man1/mktemp.1"
-
-ALTERNATIVE_LINK_NAME[df] = "${base_bindir}/df"
-ALTERNATIVE_TARGET[df] = "${bindir}/df.${BPN}"
-ALTERNATIVE_LINK_NAME[df.1] = "${mandir}/man1/df.1"
-
-ALTERNATIVE_LINK_NAME[nice] = "${base_bindir}/nice"
-ALTERNATIVE_TARGET[nice] = "${bindir}/nice.${BPN}"
-ALTERNATIVE_LINK_NAME[nice.1] = "${mandir}/man1/nice.1"
-
-ALTERNATIVE_LINK_NAME[printenv] = "${base_bindir}/printenv"
-ALTERNATIVE_TARGET[printenv] = "${bindir}/printenv.${BPN}"
-
-ALTERNATIVE_LINK_NAME[lbracket] = "${bindir}/["
-ALTERNATIVE_TARGET[lbracket] = "${bindir}/lbracket.${BPN}"
-
-ALTERNATIVE_LINK_NAME[groups.1] = "${mandir}/man1/groups.1"
-ALTERNATIVE_LINK_NAME[uptime.1] = "${mandir}/man1/uptime.1"
-ALTERNATIVE_LINK_NAME[kill.1] = "${mandir}/man1/kill.1"
-ALTERNATIVE_LINK_NAME[stat.1] = "${mandir}/man1/stat.1"
-
-python __anonymous() {
-    for prog in d.getVar('base_bindir_progs').split():
-        d.setVarFlag('ALTERNATIVE_LINK_NAME', prog, '%s/%s' % (d.getVar('base_bindir'), prog))
-
-    for prog in d.getVar('sbindir_progs').split():
-        d.setVarFlag('ALTERNATIVE_LINK_NAME', prog, '%s/%s' % (d.getVar('sbindir'), prog))
-}
-
-BBCLASSEXTEND = "native nativesdk"

meta-citadel/recipes-core/glibc/cross-localedef-native_2.27.bbappend

@@ -1 +0,0 @@
-SRCREV_localedef = "c328777219ccc480be3112cf807217ca6b570b64"

meta-citadel/recipes-core/ncurses/files/0001-tic-hang.patch

@@ -1,43 +0,0 @@
-From 168ba7a681be73ac024438e33e14fde1d5aea97d Mon Sep 17 00:00:00 2001
-From: Hongxu Jia <hongxu.jia@windriver.com>
-Date: Fri, 30 Mar 2018 10:02:24 +0800
-Subject: [PATCH 1/2] tic hang
-
-Upstream-Status: Inappropriate [configuration]
-
-'tic' of some linux distributions (e.g. fedora 11) hang in an infinite
-loop when processing the original file.
-
-Signed-off-by: anonymous
-
-Rebase to 6.1
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
----
- misc/terminfo.src | 11 +++++------
- 1 file changed, 5 insertions(+), 6 deletions(-)
-
-diff --git a/misc/terminfo.src b/misc/terminfo.src
-index 84f4810..6b385ec 100644
---- a/misc/terminfo.src
-+++ b/misc/terminfo.src
-@@ -5562,12 +5562,11 @@ konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
- # The value for kbs (see konsole-vt100) reflects local customization rather
- # than the settings used for XFree86 xterm.
- konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
--	kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
--	use=konsole-vt100,
--
--konsole+pcfkeys|konsole subset of xterm+pcfkeys,
--	kcbt=\E[Z, use=xterm+pcc2, use=xterm+pcf0,
--	use=xterm+pce2,
-+	kend=\EOF, kf1=\EOP, kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R,
-+	kf16=\EO2S, kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
-+	kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
-+	kf23=\E[23;2~, kf24=\E[24;2~, kf3=\EOR, kf4=\EOS,
-+	khome=\EOH, use=konsole-vt100,
- 
- # Obsolete: vt100.keymap
- # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
--- 
-1.8.3.1
-

meta-citadel/recipes-core/ncurses/files/0002-configure-reproducible.patch

@@ -1,35 +0,0 @@
-From 2a53c03ffa90f0050a949fc5920f0df3e668ff42 Mon Sep 17 00:00:00 2001
-From: Hongxu Jia <hongxu.jia@windriver.com>
-Date: Wed, 16 Aug 2017 14:45:27 +0800
-Subject: [PATCH 2/2] configure: reproducible
-
-"configure" enforces -U for ar flags, breaking deterministic builds.
-The flag was added to fix some vaguely specified "recent POSIX binutil
-build problems" in 2015.
-
-Upstream-Status: Pending
-Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
-
-Rebase to 6.1
-
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
----
- configure | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/configure b/configure
-index adead92..fa4fdb7 100755
---- a/configure
-+++ b/configure
-@@ -4503,7 +4503,7 @@ if test "${cf_cv_ar_flags+set}" = set; then
- else
- 
- 	cf_cv_ar_flags=unknown
--	for cf_ar_flags in -curvU -curv curv -crv crv -cqv cqv -rv rv
-+	for cf_ar_flags in -curv curv -crv crv -cqv cqv -rv rv
- 	do
- 
- 		# check if $ARFLAGS already contains this choice
--- 
-1.8.3.1
-

meta-citadel/recipes-core/ncurses/files/config.cache

@@ -1,4 +0,0 @@
-#! /bin/sh
-
-cf_cv_func_nanosleep=yes
-cf_cv_func_mkstemp=yes

meta-citadel/recipes-core/ncurses/ncurses.inc

@@ -1,319 +0,0 @@
-SUMMARY = "The New Curses library"
-DESCRIPTION = "SVr4 and XSI-Curses compatible curses library and terminfo tools including tic, infocmp, captoinfo. Supports color, multiple highlights, forms-drawing characters, and automatic recognition of keypad and function-key sequences. Extensions include resizable windows and mouse support on both xterm and Linux console using the gpm library."
-HOMEPAGE = "http://www.gnu.org/software/ncurses/ncurses.html"
-LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://ncurses/base/version.c;beginline=1;endline=27;md5=cbc180a8c44ca642e97c35452fab5f66"
-SECTION = "libs"
-DEPENDS = "ncurses-native"
-DEPENDS_class-native = ""
-
-BINCONFIG = "${bindir}/ncurses5-config ${bindir}/ncursesw5-config \
-	${bindir}/ncurses6-config ${bindir}/ncursesw6-config"
-
-inherit autotools binconfig-disabled multilib_header pkgconfig
-
-# Upstream has useful patches at times at ftp://invisible-island.net/ncurses/
-SRC_URI = "git://salsa.debian.org/debian/ncurses.git;protocol=https"
-
-EXTRA_AUTORECONF = "-I m4"
-CONFIG_SITE =+ "${WORKDIR}/config.cache"
-
-EXTRASITECONFIG = "CFLAGS='${CFLAGS} -I${SYSROOT_DESTDIR}${includedir}'"
-
-# Whether to enable separate widec libraries; must be 'true' or 'false'
-#
-# TODO: remove this variable when widec is supported in every setup?
-ENABLE_WIDEC ?= "true"
-
-# _GNU_SOURCE is required for widec stuff and is detected automatically
-# for target objects.  But it must be set manually for native and sdk
-# builds.
-BUILD_CPPFLAGS += "-D_GNU_SOURCE"
-
-# natives don't generally look in base_libdir
-base_libdir_class-native = "${libdir}"
-
-# Display corruption occurs on 64 bit hosts without these settings
-# This was derrived from the upstream debian ncurses which uses
-# these settings for 32 and 64 bit hosts.
-EXCONFIG_ARGS = ""
-EXCONFIG_ARGS_class-native = " \
-		--disable-lp64 \
-		--with-chtype='long' \
-		--with-mmask-t='long'"
-EXCONFIG_ARGS_class-nativesdk = " \
-		--disable-lp64 \
-		--with-chtype='long' \
-		--with-mmask-t='long'"
-
-PACKAGES_DYNAMIC = "^${PN}-lib.*"
-
-# Fall back to the host termcap / terminfo for -nativesdk and -native
-# The reality is a work around for strange problems with things like
-# "bitbake -c menuconfig busybox" where it cannot find the terminfo
-# because the sstate had a hard coded search path.  Until this is fixed
-# another way this is deemed good enough.
-EX_TERMCAP = ""
-EX_TERMCAP_class-native = ":/etc/termcap:/usr/share/misc/termcap"
-EX_TERMCAP_class-nativesdk = ":/etc/termcap:/usr/share/misc/termcap"
-EX_TERMINFO = ""
-EX_TERMINFO_class-native = ":/etc/terminfo:/usr/share/terminfo:/usr/share/misc/terminfo:/lib/terminfo"
-EX_TERMINFO_class-nativesdk = ":/etc/terminfo:/usr/share/terminfo:/usr/share/misc/terminfo:/lib/terminfo"
-EX_TERMLIB ?= "tinfo"
-
-# Helper function for do_configure to allow multiple configurations
-# $1 the directory to run configure in
-# $@ the arguments to pass to configure
-ncurses_configure() {
-	mkdir -p $1
-	cd $1
-	shift
-	oe_runconf \
-	        --without-debug \
-	        --without-ada \
-	        --without-gpm \
-	        --enable-hard-tabs \
-	        --enable-xmc-glitch \
-	        --enable-colorfgbg \
-	        --with-termpath='${sysconfdir}/termcap:${datadir}/misc/termcap${EX_TERMCAP}' \
-	        --with-terminfo-dirs='${sysconfdir}/terminfo:${datadir}/terminfo${EX_TERMINFO}' \
-	        --with-shared \
-	        --disable-big-core \
-	        --program-prefix= \
-	        --with-ticlib \
-	        --with-termlib=${EX_TERMLIB} \
-	        --enable-sigwinch \
-	        --enable-pc-files \
-	        --disable-rpath-hack \
-		${EXCONFIG_ARGS} \
-	        --with-manpage-format=normal \
-	        --disable-stripping \
-	        "$@" || return 1
-	cd ..
-}
-
-# Override the function from the autotools class; ncurses requires a
-# patched autoconf213 to generate the configure script. This autoconf
-# is not available so that the shipped script will be used.
-do_configure() {
-        # check does not work with cross-compiling and is generally
-        # broken because it requires stdin to be pollable (which is
-        # not the case for /dev/null redirections)
-        export cf_cv_working_poll=yes
-	#Remove ${includedir} from CPPFLAGS, need for cross compile
-	sed -i 's#-I${cf_includedir}##g' ${S}/configure || die "sed CPPFLAGS"
-
-	# The --enable-pc-files requires PKG_CONFIG_LIBDIR existed
-	mkdir -p ${PKG_CONFIG_LIBDIR}
-	( cd ${S}; gnu-configize --force )
-	ncurses_configure "narrowc" || \
-		return 1
-	! ${ENABLE_WIDEC} || \
-		ncurses_configure "widec" "--enable-widec" "--without-progs"
-
-}
-
-do_compile() {
-        oe_runmake -C narrowc libs
-        oe_runmake -C narrowc/progs
-
-        ! ${ENABLE_WIDEC} || \
-            oe_runmake -C widec libs
-}
-
-# set of expected differences between narrowc and widec header
-#
-# TODO: the NCURSES_CH_T difference can cause real problems :(
-_unifdef_cleanup = " \
-  -e '\!/\* \$Id: curses.wide,v!,\!/\* \$Id: curses.tail,v!d' \
-  -e '/^#define NCURSES_CH_T /d' \
-  -e '/^#include <wchar.h>/d' \
-  -e '\!^/\* .* \*/!d' \
-"
-
-do_test[depends] = "unifdef-native:do_populate_sysroot"
-do_test[dirs] = "${S}"
-do_test() {
-        ${ENABLE_WIDEC} || return 0
-
-        # make sure that the narrow and widec header are compatible
-        # and differ only in minor details.
-        unifdef -k narrowc/include/curses.h | \
-            sed ${_unifdef_cleanup} > curses-narrowc.h
-        unifdef -k widec/include/curses.h | \
-            sed ${_unifdef_cleanup} > curses-widec.h
-
-        diff curses-narrowc.h curses-widec.h
-}
-
-# Split original _install_opts to two parts.
-# One is the options to install contents, the other is the parameters \
-# when running command "make install"
-# Note that install.libs will also implicitly install header files,
-# so we do not need to explicitly specify install.includes.
-# Doing so could in fact result in a race condition, as both targets
-# (install.libs and install.includes) would install the same headers
-# at the same time
-
-_install_opts = " install.libs install.man "
-
-_install_cfgs = "\
-  DESTDIR='${D}' \
-  PKG_CONFIG_LIBDIR='${libdir}/pkgconfig' \
-"
-
-do_install() {
-        # Order of installation is important; widec installs a 'curses.h'
-        # header with more definitions and must be installed last hence.
-        # Compatibility of these headers will be checked in 'do_test()'.
-        oe_runmake -C narrowc ${_install_cfgs} ${_install_opts} \
-                install.progs
-
-        # The install.data should run after install.libs, otherwise
-        # there would be a race issue in a very critical conditon, since
-        # tic will be run by install.data, and tic needs libtinfo.so
-        # which would be regenerated by install.libs.
-        oe_runmake -C narrowc ${_install_cfgs} \
-                install.data
-
-
-        ! ${ENABLE_WIDEC} || \
-            oe_runmake -C widec ${_install_cfgs} ${_install_opts}
-
-        cd narrowc
-
-        # include some basic terminfo files
-        # stolen ;) from gentoo and modified a bit
-        for x in ansi console dumb linux rxvt screen screen-256color sun vt52 vt100 vt102 vt200 vt220 xterm-color xterm-xfree86 xterm-256color
-        do
-                local termfile="$(find "${D}${datadir}/terminfo/" -name "${x}" 2>/dev/null)"
-                local basedir="$(basename $(dirname "${termfile}"))"
-
-                if [ -n "${termfile}" ]
-                then
-                        install -d ${D}${sysconfdir}/terminfo/${basedir}
-                        mv ${termfile} ${D}${sysconfdir}/terminfo/${basedir}/
-                        ln -s /etc/terminfo/${basedir}/${x} \
-                                ${D}${datadir}/terminfo/${basedir}/${x}
-                fi
-        done
-        # i think we can use xterm-color as default xterm
-        if [ -e ${D}${sysconfdir}/terminfo/x/xterm-color ]
-        then
-                ln -sf xterm-color ${D}${sysconfdir}/terminfo/x/xterm
-        fi
-
-        # When changing ${libdir} to e.g. /usr/lib/myawesomelib/ ncurses 
-        # still installs '/usr/lib/terminfo', so try to rm both 
-        # the proper path and a slightly hardcoded one
-        rm -f ${D}${libdir}/terminfo ${D}${prefix}/lib/terminfo
-
-        # create linker scripts for libcurses.so and libncurses to
-        # link against -ltinfo when needed. Some builds might break
-        # else when '-Wl,--no-copy-dt-needed-entries' has been set in
-        # linker flags.
-        for i in libncurses libncursesw; do
-                f=${D}${libdir}/$i.so
-                test -h $f || continue
-                rm -f $f
-                echo '/* GNU ld script */'  >$f
-                echo "INPUT($i.so.5 AS_NEEDED(-ltinfo))" >>$f
-        done
-
-        # Make sure that libcurses is linked so that it gets -ltinfo
-        # also, this should be addressed upstream really.
-        ln -sf libncurses.so ${D}${libdir}/libcurses.so
-
-        # create libtermcap.so linker script for backward compatibility
-        f=${D}${libdir}/libtermcap.so
-        echo '/* GNU ld script */' >$f
-        echo 'INPUT(AS_NEEDED(-ltinfo))' >>$f
-
-        if [ ! -d "${D}${base_libdir}" ]; then
-            # Setting base_libdir to libdir as is done in the -native
-            # case will skip this code
-            mkdir -p ${D}${base_libdir}
-            mv ${D}${libdir}/libncurses.so.* ${D}${base_libdir}
-            ! ${ENABLE_WIDEC} || \
-                mv ${D}${libdir}/libncursesw.so.* ${D}${base_libdir}
-
-            mv ${D}${libdir}/libtinfo.so.* ${D}${base_libdir}
-            rm ${D}${libdir}/libtinfo.so
-
-            # Use lnr to ensure this is a relative link despite absolute paths
-            # (as we can't know the relationship between base_libdir and libdir).
-            # At some point we can rely on coreutils 8.16 which has ln -r.
-            lnr ${D}${base_libdir}/libtinfo.so.5 ${D}${libdir}/libtinfo.so
-        fi
-        if [ -d "${D}${includedir}/ncurses" ]; then
-            for f in `find ${D}${includedir}/ncurses -name "*.h"`
-            do
-	        f=`basename $f`
-	        test -e ${D}${includedir}/$f && continue
-                ln -sf ncurses/$f ${D}${includedir}/$f
-            done
-        fi
-        oe_multilib_header curses.h
-}
-
-python populate_packages_prepend () {
-    libdir = d.expand("${libdir}")
-    base_libdir = d.expand("${base_libdir}")
-    pnbase = d.expand("${PN}-lib%s")
-    do_split_packages(d, libdir, '^lib(.*)\.so\..*', pnbase, 'ncurses %s library', prepend=True, extra_depends = '', allow_links=True)
-    if libdir is not base_libdir:
-        do_split_packages(d, base_libdir, '^lib(.*)\.so\..*', pnbase, 'ncurses %s library', prepend=True, extra_depends = '', allow_links=True)
-}
-
-
-inherit update-alternatives
-
-ALTERNATIVE_PRIORITY = "100"
-
-ALTERNATIVE_ncurses-tools_class-target = "clear reset"
-
-BBCLASSEXTEND = "native nativesdk"
-
-PACKAGES += " \
-  ${PN}-tools \
-  ${PN}-terminfo-base \
-  ${PN}-terminfo \
-"
-
-FILES_${PN} = "\
-  ${bindir}/tput \
-  ${bindir}/tset \
-  ${bindir}/ncurses5-config \
-  ${bindir}/ncursesw5-config \
-  ${bindir}/ncurses6-config \
-  ${bindir}/ncursesw6-config \
-  ${datadir}/tabset \
-"
-
-# This keeps only tput/tset in ncurses
-# clear/reset are in already busybox
-FILES_${PN}-tools = "\
-  ${bindir}/tic \
-  ${bindir}/toe \
-  ${bindir}/infotocap \
-  ${bindir}/captoinfo \
-  ${bindir}/infocmp \
-  ${bindir}/clear${@['', '.${BPN}']['${CLASSOVERRIDE}' == 'class-target']} \
-  ${bindir}/reset${@['', '.${BPN}']['${CLASSOVERRIDE}' == 'class-target']} \
-  ${bindir}/tack \
-  ${bindir}/tabs \
-"
-
-# 'reset' is a symlink to 'tset' which is in the 'ncurses' package
-RDEPENDS_${PN}-tools = "${PN}"
-
-FILES_${PN}-terminfo = "\
-  ${datadir}/terminfo \
-"
-
-FILES_${PN}-terminfo-base = "\
-  ${sysconfdir}/terminfo \
-"
-
-RSUGGESTS_${PN}-libtinfo = "${PN}-terminfo"
-RRECOMMENDS_${PN}-libtinfo = "${PN}-terminfo-base"

meta-citadel/recipes-core/ncurses/ncurses_6.1.bb

@@ -1,11 +0,0 @@
-require ncurses.inc
-
-SRC_URI += "file://0001-tic-hang.patch \
-            file://0002-configure-reproducible.patch \
-            file://config.cache \
-"
-# commit id corresponds to the revision in package version
-SRCREV = "518fe9f913a0bfb80f1e366c9fcccf23e79dc69b"
-S = "${WORKDIR}/git"
-EXTRA_OECONF += "--with-abi-version=5"
-UPSTREAM_CHECK_GITTAGREGEX = "(?P<pver>\d+(\.\d+)+(\+\d+)*)"

meta-citadel/recipes-devtools/bison/bison_3.0.4.bbappend

@@ -1,3 +0,0 @@
-
-FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
-SRC_URI += "file://gnulib.patch"

meta-citadel/recipes-devtools/bison/files/gnulib.patch

@@ -1,21 +0,0 @@
-Fix gnulib issues found with glibc 2.28 libio.h removal
-
-see
-https://lists.gnu.org/r/bug-gnulib/2018-03/msg00000.html
-
-Upstream-Status: Pending
-Signed-off-by: Khem Raj <raj.khem@gmail.com>
-
-Index: bison-3.0.4/lib/fseterr.c
-===================================================================
---- bison-3.0.4.orig/lib/fseterr.c
-+++ bison-3.0.4/lib/fseterr.c
-@@ -29,7 +29,7 @@ fseterr (FILE *fp)
-   /* Most systems provide FILE as a struct and the necessary bitmask in
-      <stdio.h>, because they need it for implementing getc() and putc() as
-      fast macros.  */
--#if defined _IO_ftrylockfile || __GNU_LIBRARY__ == 1 /* GNU libc, BeOS, Haiku, Linux libc5 */
-+#if defined _IO_EOF_SEEN || __GNU_LIBRARY__ == 1 /* GNU libc, BeOS, Haiku, Linux libc5 */
-   fp->_flags |= _IO_ERR_SEEN;
- #elif defined __sferror || defined __DragonFly__ /* FreeBSD, NetBSD, OpenBSD, DragonFly, Mac OS X, Cygwin */
-   fp_->_flags |= __SERR;

meta-citadel/recipes-devtools/checksec/checksec_1.5-1.bb

@@ -1,25 +0,0 @@
-SUMMARY = "Checksec tool"
-DESCRIPTION = "The checksec.sh script is designed to test what standard Linux OS and PaX security features are being used."
-SECTION = "security"
-LICENSE = "BSD-3-Clause"
-HOMEPAGE="http://www.trapkit.de/tools/checksec.html"
-
-LIC_FILES_CHKSUM = "file://checksec-${PV}.sh;beginline=3;endline=34;md5=6dab14470bfdf12634b866dbdd7a04b0"
-
-SRC_URI = "http://www.trapkit.de/tools/checksec.sh;downloadfilename=checksec-${PV}.sh"
-
-SRC_URI[md5sum] = "57cc3fbbbe48e8ebd4672c569954374d"
-SRC_URI[sha256sum] = "05822cd8668589038d20650faa0e56f740911d8ad06f7005b3d12a5c76591b90"
-
-
-S = "${WORKDIR}"
-
-do_install() {
-    install -d ${D}${bindir}
-    install -m 0755 ${WORKDIR}/checksec-${PV}.sh    ${D}${bindir}/checksec.sh
-    sed -i 's/\r//' ${D}${bindir}/checksec.sh
-}
-
-RDEPENDS_${PN} = "bash binutils"
-
-BBCLASSEXTEND = "native"

meta-citadel/recipes-devtools/debootstrap/debootstrap/pkgdetails.c

@@ -1,608 +0,0 @@
-/* #define _GNU_SOURCE	** for vasprintf() */
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <ctype.h>
-#include <stdarg.h>
-#include <errno.h>
-#include <assert.h>
-
-#define MAX_LINE 1000
-#define MAX_PKGS 100
-
-char *checksum_field=NULL;
-
-/* exclude_field is a comma-separated list of dependencies that you want to exclude, for example:
-   Package: init
-   Pre-Depends: systemd-sysv | sysvinit-core | upstart
-
-   This will always give systemd-sysv with GETDEPS, unless you use
-   DEBOOTSTRAP_EXCLUDE_FIELD=systemd-sysv,sysvinit-core pkgdetails Packages init
- */
-char *exclude_field=NULL;
-char **exclude_array=NULL;
-
-static void oom_die(void)
-{
-    fputs("Out of memory!\n", stderr);
-    exit(1);
-}
-
-static char *xvasprintf(const char *fmt, va_list ap) {
-    char *ret;
-
-    if (vasprintf (&ret, fmt, ap) < 0) {
-        if (errno == ENOMEM)
-            oom_die();
-        return NULL;
-    }
-    return ret;
-}
-
-static char *xasprintf(const char *fmt, ...) {
-    va_list ap;
-    char *ret;
-
-    va_start(ap, fmt);
-    ret = xvasprintf(fmt, ap);
-    va_end(ap);
-    return ret;
-}
-
-static void parse_exclude_field(const char *str) {
-    char *workptr, *saveptr = NULL, *tok = NULL;
-    workptr = strdup(str);
-    int nf=0,f;
-    tok=workptr;
-    while(*tok==',') tok++;
-    do {
-      saveptr=strchr(tok,',');
-      tok++;
-      if (saveptr) tok=saveptr+1;
-      nf++;
-    } while(saveptr);
-
-    exclude_array = (char **) malloc((nf+1) * sizeof(char *));
-    if (exclude_array==NULL){
-      oom_die();
-    }
-    tok = strtok_r(workptr, ",", &saveptr);
-    for(f=0;f<nf;f++){
-      exclude_array[f] = strdup(tok);
-      tok = strtok_r(NULL, ",", &saveptr);
-    }
-    exclude_array[nf+1-1]=NULL;
-    free(workptr);
-}
-
-static void free_exclude_array(void) {
-    int f;
-    if (exclude_array==NULL) return;
-    f=0;
-    while(exclude_array[f]!=NULL){
-      free(exclude_array[f]);
-      exclude_array[f]=NULL;
-      f++;
-    }
-    free(exclude_array);
-    exclude_array=NULL;
-}
-
-/* versionclause is not used at the moment */
-static int exclude_dep(const char *dep, const char *versionclause) {
-    int f;
-    if (exclude_array==NULL) return(0);
-
-    f=0;
-    while(exclude_array[f]){
-      if (!strcmp(exclude_array[f], dep)){
-        return(1);
-      }
-      f++;
-    }
-    return(0);
-}
-
-static char *fieldcpy(char *dst, char *fld) {
-    while (*fld && *fld != ':') 
-        fld++;
-    if (!*(fld++)) 
-        return NULL;
-    while (isspace(*fld)) fld++;
-    return strcpy(dst, fld);
-}
-
-static void outputdeps(char *deps) {
-    char *pch = deps;
-
-    while (1) {
-        while (isspace(*pch)) pch++;
-        if (!*pch) break;
-
-        while (*pch && *pch != '(' && *pch != '|' && *pch != ','
-               && !isspace(*pch))
-        {
-            fputc(*pch++, stdout);
-        }
-        fputc('\n', stdout);
-        while (*pch && *pch++ != ',') (void)NULL;
-    }
-}
-
-typedef struct deps_proto {
-  char *cur_pkg;
-  int nd;
-/* 95% of Depends: in jessie have less than 16 entries, for the rest
-   we do a realloc() when necessary. */
-#define DEPCHUNK	16
-  char ** deps;
-} deps_t, *deps_p;
-
-static deps_p deps_new(void) {
-  deps_p n = (deps_p) malloc(sizeof(deps_t));
-  if (n==NULL) oom_die();
-  memset(n, 0x00, sizeof(deps_t));
-
-  n->cur_pkg = NULL;
-  n->nd = 0;
-  n->deps = NULL;
-
-  return(n);
-}
-
-static void deps_free(deps_p d) {
-  int i;
-  if (d==NULL) return;
-  for(i=0;i<d->nd;i++){
-    if (d->deps[i]) {
-      free(d->deps[i]);
-      d->deps[i] = NULL;
-    }
-  }
-  if (d->nd) {
-    free(d->deps);
-    d->deps = NULL;
-  }
-  d->nd = 0;
-  if (d->cur_pkg) {
-    free(d->cur_pkg);
-    d->cur_pkg = NULL;
-  }
-  free(d);
-}
-
-static void deps_setpkgname(deps_p d, const char *cur_pkg) {
-  if (d->cur_pkg) free(d->cur_pkg);
-  d->cur_pkg = strdup(cur_pkg);
-}
-
-static void deps_add_4(deps_p d, const char *dep) {
-  int di;
-
-  /* Typically, a package depends on 0-10 other ones. I can't be
-     bothered to write a sort function for that. Slowsort it is. */
-  for (di=0;di<d->nd;di++){
-    if (!strcmp(d->deps[di], dep)) return;
-  }
-
-  /* extend if necessary */
-  if ((d->nd % DEPCHUNK) == 0) {
-    d->deps = (char **) realloc(d->deps, (d->nd + DEPCHUNK) * sizeof(char *));
-    if (d->deps == NULL) oom_die();
-    for(di=0;di < DEPCHUNK;di++) d->deps[d->nd + di] = NULL;
-  }
-
-  /* add it */
-  d->deps[d->nd] = strdup(dep);
-  if (d->deps[d->nd] == NULL) oom_die();
-  d->nd++;
-}
-
-static int deps_add_3(deps_p d, const char *versioneddep) {
-  char workptr[MAX_LINE+1], *tok3, *saveptr3, *versionclause;
-  int used;
-  strcpy(workptr,versioneddep);
-  tok3 = strtok_r(workptr, " (", &saveptr3);
-
-  versionclause = strtok_r(NULL, " (", &saveptr3);
-  /* versionclause is not used, but keep lint happy */
-  if (versionclause) {
-    while(*versionclause == ' ') versionclause++;
-  }
-
-  used = !exclude_dep(tok3, versionclause);
-
-  if (!used) {
-    fprintf(stderr,"W: pkgdetails: skip %s dependency on %s\n", d->cur_pkg, tok3);
-  } else {
-    /* add it to the list */
-    deps_add_4(d, tok3);
-  }
-
-  return(used);
-}
-
-static void deps_add_2(deps_p d, const char *depsaltlist) {
-  char workptr[MAX_LINE+1], *tok2, *saveptr2;
-  int used, chose_alternative;
-
-  /* shortcut: most dependencies don't have the alternatives syntax */
-  if (strchr(depsaltlist, '|')==NULL) {
-    (void) deps_add_3(d, depsaltlist);
-    return;
-  }
-
-  /* parse this dependency-alternatives-list A | B | C */
-  strcpy(workptr, depsaltlist);
-  tok2 = strtok_r(workptr, " |", &saveptr2);
-  chose_alternative = 0;
-  used = 0;
-  while(tok2){
-    used = deps_add_3(d, tok2);
-    if (used) break;  // we want only the first alternative from the list
-    tok2 = strtok_r(NULL, " |", &saveptr2);
-    if (tok2) {
-      fprintf(stderr,"I: pkgdetails: consider %s dependency on %s\n", d->cur_pkg, tok2);
-      chose_alternative = 1;
-    }
-  }
-
-  if (! used) {
-    fprintf(stderr,"E: pkgdetails: none of the %s dependencies chosen from alternatives %s\n", d->cur_pkg, depsaltlist);
-  } else {
-    if (chose_alternative) {
-      fprintf(stderr,"I: pkgdetails: used %s dependency on %s\n", d->cur_pkg, tok2);
-    }
-  }
-}
-
-static void deps_add(deps_p d, const char *depslist) {
-  char workptr[MAX_LINE+1], *tok, *saveptr = NULL;
-
-  /* skip initial space */
-  while ((depslist[0])&&(isspace(depslist[0]))) depslist++;
-
-  assert(strlen(depslist) <= MAX_LINE);
-  strcpy(workptr, depslist);
-  tok = strtok_r(workptr, ",", &saveptr);
-  while(tok){
-    deps_add_2(d, tok);
-    tok = strtok_r(NULL, ",", &saveptr);
-  }
-}
-
-static void deps_output(FILE *f, const deps_p d) {
-  int i;
-  if ((f==NULL)||(d==NULL)||(d->nd==0)) return;
-
-  for(i=0;i<d->nd;i++){
-    fputs(d->deps[i], f);
-    fputs("\n", f);
-  }
-}
-
-/* The syntax of a Debian Depends: or Pre-Depends: line is as follows:
-
-   Depends: deps
-   Pre-Depends: deps
-   deps = dep | deps "," dep
-   dep = versioneddep | altdep
-   altdep = versioneddep "|" versioneddep | versioneddep "|" altdep
-   versioneddep = simpledep | simpledep "(" compareclause ")"
-   simpledep = packagename
-
-   It needs to be parsed accurately to properly do alternatives, if we
-   don't like the first choice of an altdep list (hint: init)
- */
-static void dogetdeps(char *pkgsfile, char **in_pkgs, int pkgc) {
-    char buf[MAX_LINE+1];
-    char cur_pkg[MAX_LINE];
-    char cur_deps[MAX_LINE];
-    char cur_predeps[MAX_LINE];
-    char prev_pkg[MAX_LINE];
-    char *pkgs[MAX_PKGS];
-    int i,l;
-    int skip;
-    FILE *f;
-    int output_pkg = -1;
-    deps_p curdeps = NULL;
-
-    buf[MAX_LINE+1-1] = '\0';
-    cur_pkg[0] = cur_deps[0] = cur_predeps[0] = prev_pkg[0] = '\0';
-
-    for (i = 0; i < pkgc; i++) pkgs[i] = in_pkgs[i];
-
-    f = fopen(pkgsfile, "r");
-    if (f == NULL) {
-        perror(pkgsfile);
-        exit(1);
-    }
-
-    curdeps = deps_new();
-
-    skip = 1;
-    while (fgets(buf, MAX_LINE, f)) {
-        l = strlen(buf);
-        if (*buf && buf[l-1] == '\n') buf[l-1] = '\0';
-        if (strncasecmp(buf, "Package:", 8) == 0) {
-            int any = 0;
-            skip = 1;
-            fieldcpy(cur_pkg, buf);
-            deps_setpkgname(curdeps, cur_pkg);
-            if (strcmp(cur_pkg, prev_pkg) != 0) {
-                if (output_pkg != -1)
-                    pkgs[output_pkg] = NULL;
-                if (cur_deps[0])
-                    outputdeps(cur_deps);
-                if (cur_predeps[0])
-                    outputdeps(cur_predeps);
-                strcpy(prev_pkg, cur_pkg);
-            }
-            cur_deps[0] = cur_predeps[0] = '\0';
-            output_pkg = -1;
-	    for (i = 0; i < pkgc; i++) {
-		if (!pkgs[i]) continue;
-		any = 1;
-                if (strcmp(cur_pkg, pkgs[i]) == 0) {
-                    skip = 0;
-                    output_pkg = i;
-                    break;
-                }
-            }
-            if (!any) break;
-        } else if (!skip && strncasecmp(buf, "Depends:", 8) == 0)
-{
-		deps_add(curdeps, &buf[8]);
-}
-        else if (!skip && strncasecmp(buf, "Pre-Depends:", 12) == 0)
-{
-		deps_add(curdeps, &buf[12]);
-}
-    }
-
-    deps_output(stdout, curdeps);
-
-    fclose(f);
-
-    deps_free(curdeps);
-}
-
-static void dopkgmirrorpkgs(int uniq, char *mirror, char *pkgsfile, 
-        char *fieldname, char **in_pkgs, int pkgc) 
-{
-    char buf[MAX_LINE+1];
-    char cur_field[MAX_LINE];
-    char cur_pkg[MAX_LINE];
-    char cur_ver[MAX_LINE];
-    char cur_arch[MAX_LINE];
-    char cur_size[MAX_LINE];
-    char cur_checksum[MAX_LINE];
-    char cur_filename[MAX_LINE];
-    char prev_pkg[MAX_LINE];
-    char *pkgs[MAX_PKGS];
-    int i,l;
-    FILE *f;
-    char *output = NULL;
-    int output_pkg = -1;
-
-    buf[MAX_LINE+1-1] = '\0';
-    cur_field[0] = cur_pkg[0] = cur_ver[0] = cur_arch[0] = cur_filename[0] = prev_pkg[0] = '\0';
-
-    for (i = 0; i < pkgc; i++) pkgs[i] = in_pkgs[i];
-
-    f = fopen(pkgsfile, "r");
-    if (f == NULL) {
-        perror(pkgsfile);
-        exit(1);
-    }
-    while (fgets(buf, MAX_LINE, f)) {
-        l = strlen(buf);
-        if (*buf && buf[l-1] == '\n') buf[l-1] = '\0';
-        if (strncasecmp(buf, fieldname, strlen(fieldname)) == 0) {
-            fieldcpy(cur_field, buf);
-	}
-        if (strncasecmp(buf, "Package:", 8) == 0) {
-            fieldcpy(cur_pkg, buf);
-            if (strcmp(cur_pkg, prev_pkg) != 0) {
-                if (output)
-                    fputs(output, stdout);
-                if (uniq && output_pkg != -1)
-                    pkgs[output_pkg] = NULL;
-                strcpy(prev_pkg, cur_pkg);
-            }
-            free(output);
-            output = NULL;
-            output_pkg = -1;
-        } else if (strncasecmp(buf, "Version:", 8) == 0) {
-            fieldcpy(cur_ver, buf);
-        } else if (strncasecmp(buf, "Architecture:", 13) == 0) {
-            fieldcpy(cur_arch, buf);
-        } else if (strncasecmp(buf, "Size:", 5) == 0) {
-            fieldcpy(cur_size, buf);
-        } else if (strncasecmp(buf, checksum_field, strlen(checksum_field)) == 0
-	           && buf[strlen(checksum_field)] == ':') {
-            fieldcpy(cur_checksum, buf);
-        } else if (strncasecmp(buf, "Filename:", 9) == 0) {
-            fieldcpy(cur_filename, buf);
-        } else if (!*buf) {
-	    int any = 0;
-	    for (i = 0; i < pkgc; i++) {
-		if (!pkgs[i]) continue;
-		any = 1;
-                if (strcmp(cur_field, pkgs[i]) == 0) {
-                    free(output);
-                    output = xasprintf("%s %s %s %s %s %s %s\n", cur_pkg, cur_ver, cur_arch, mirror, cur_filename, cur_checksum, cur_size);
-                    output_pkg = i;
-		    break;
-		}
-            }
-	    if (!any) break;
-            cur_field[0] = '\0';
-        }
-    }
-    if (output)
-        fputs(output, stdout);
-    if (uniq && output_pkg != -1)
-        pkgs[output_pkg] = NULL;
-    fclose(f);
-
-    /* any that weren't found are returned as "pkg -" */
-    if (uniq) {
-        for (i = 0; i < pkgc; i++) {
-            if (pkgs[i]) {
-                printf("%s -\n", pkgs[i]);
-            }
-        }
-    }
-
-}
-
-static void dopkgstanzas(char *pkgsfile, char **pkgs, int pkgc)
-{
-    char buf[MAX_LINE+1];
-    char *accum;
-    size_t accum_size = 0, accum_alloc = MAX_LINE * 2;
-    char cur_pkg[MAX_LINE];
-    FILE *f;
-    int l;
-
-    buf[MAX_LINE+1-1] = '\0';
-    accum = malloc(accum_alloc);
-    if (!accum)
-        oom_die();
-
-    f = fopen(pkgsfile, "r");
-    if (f == NULL) {
-        perror(pkgsfile);
-        free(accum);
-        exit(1);
-    }
-    while (fgets(buf, MAX_LINE, f)) {
-        if (*buf) {
-	    size_t len = strlen(buf);
-            if (accum_size + len + 1 > accum_alloc) {
-                accum_alloc = (accum_size + len + 1) * 2;
-                accum = realloc(accum, accum_alloc);
-                if (!accum)
-                    oom_die();
-            }
-            strcpy(accum + accum_size, buf);
-	    accum_size += len;
-        }
-        l = strlen(buf);
-        if (*buf && buf[l-1] == '\n') buf[l-1] = '\0';
-        if (strncasecmp(buf, "Package:", 8) == 0) {
-            fieldcpy(cur_pkg, buf);
-        } else if (!*buf) {
-            int i;
-            for (i = 0; i < pkgc; i++) {
-                if (!pkgs[i]) continue;
-                if (strcmp(cur_pkg, pkgs[i]) == 0) {
-                    fputs(accum, stdout);
-		    if (accum[accum_size - 1] != '\n')
-			fputs("\n\n", stdout);
-		    else if (accum[accum_size - 2] != '\n')
-			fputc('\n', stdout);
-                    break;
-                }
-            }
-            *accum = '\0';
-            accum_size = 0;
-        }
-    }
-    fclose(f);
-
-    free(accum);
-}
-
-static int dotranslatewgetpercent(int low, int high, int end, char *str) {
-    int ch;
-    int val, lastval;
-    int allow_percentage;
-
-    /* print out anything that looks like a % on its own line, appropriately
-     * scaled */
-
-    lastval = val = 0;
-    allow_percentage = 0;
-    while ( (ch = getchar()) != EOF ) {
-	if (isspace(ch)) {
-	    allow_percentage = 1;
-	} else if (allow_percentage && isdigit(ch)) {
-	    val *= 10; val += ch - '0';
-	} else if (allow_percentage && ch == '%') {
-	    float f = (float) val / 100.0 * (high - low) + low;
-	    if (str) {
-	    	printf("P: %d %d %s\n", (int) f, end, str);
-	    } else {
-	    	printf("P: %d %d\n", (int) f, end);
-	    }
-	    lastval = val;
-	} else {
-	    val = 0;
-	    allow_percentage = 0;
-	}
-    }
-    return lastval == 100;
-}
-
-int main(int argc, char *argv[]) {
-    checksum_field=getenv("DEBOOTSTRAP_CHECKSUM_FIELD");
-    if (checksum_field == NULL) {
-        checksum_field="MD5sum";
-    }
-
-    exclude_field=getenv("DEBOOTSTRAP_EXCLUDE_FIELD");
-    if (exclude_field != NULL) {
-       parse_exclude_field(exclude_field);
-    } else {
-       exclude_array = NULL;
-    }
-
-    if ((argc == 6 || argc == 5) && strcmp(argv[1], "WGET%") == 0) {
-	if (dotranslatewgetpercent(atoi(argv[2]), atoi(argv[3]), 
-	                           atoi(argv[4]), argc == 6 ? argv[5] : NULL))
-	{
-	    exit(0);
-	} else {
-	    exit(1);
-	}
-    } else if (argc >= 4 && strcmp(argv[1], "GETDEPS") == 0) {
-        int i;
-        for (i = 3; argc - i > MAX_PKGS; i += MAX_PKGS) {
-	    dogetdeps(argv[2], argv+i, MAX_PKGS);
-	}
-	dogetdeps(argv[2], argv+i, argc-i);
-        free_exclude_array();
-	exit(0);
-    } else if (argc >= 5 && strcmp(argv[1], "PKGS") == 0) {
-        int i;
-        for (i = 4; argc - i > MAX_PKGS; i += MAX_PKGS) {
-	    dopkgmirrorpkgs(1, argv[2], argv[3], "Package:", argv+i, MAX_PKGS);
-	}
-	dopkgmirrorpkgs(1, argv[2], argv[3], "Package:", argv+i, argc-i);
-	exit(0);
-    } else if (argc >= 6 && strcmp(argv[1], "FIELD") == 0) {
-        int i;
-        for (i = 5; argc - i > MAX_PKGS; i += MAX_PKGS) {
-	    dopkgmirrorpkgs(0, argv[3], argv[4], argv[2], argv+i, MAX_PKGS);
-	}
-	dopkgmirrorpkgs(0, argv[3], argv[4], argv[2], argv+i, argc-i);
-	exit(0);
-    } else if (argc >= 4 && strcmp(argv[1], "STANZAS") == 0) {
-	int i;
-	for (i = 3; argc - i > MAX_PKGS; i += MAX_PKGS) {
-	    dopkgstanzas(argv[2], argv+i, MAX_PKGS);
-	}
-	dopkgstanzas(argv[2], argv+i, argc-i);
-	exit(0);
-    } else {
-        fprintf(stderr, "usage: %s PKGS mirror packagesfile pkgs..\n", argv[0]);
-        fprintf(stderr, "   or: %s FIELD field mirror packagesfile pkgs..\n", 
-                argv[0]);
-        fprintf(stderr, "   or: %s GETDEPS packagesfile pkgs..\n", argv[0]);
-        fprintf(stderr, "   or: %s STANZAS packagesfile pkgs..\n", argv[0]);
-	fprintf(stderr, "   or: %s WGET%% low high end reason\n", argv[0]);
-        exit(1);
-    }
-}

meta-citadel/recipes-devtools/debootstrap/debootstrap_1.0.67.bb

@@ -1,35 +0,0 @@
-SUMMARY = "Install a Debian system into a subdirectory"
-HOMEPAGE = "https://wiki.debian.org/Debootstrap"
-SECTION = "devel"
-LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://debian/copyright;md5=1e68ced6e1689d4cd9dac75ff5225608"
-
-inherit pkgconfig
-
-SRC_URI  = "\
-    http://http.debian.net/debian/pool/main/d/debootstrap/debootstrap_1.0.67.tar.gz \
-    file://devices.tar.gz;unpack=0 \
-"
-
-SRC_URI[md5sum] = "eacabfe2e45415af60b1d74c3a23418a"
-SRC_URI[sha256sum] = "0a12e0a2bbff185d47711a716b1f2734856100e8784361203e834fed0cffa51b"
-
-S = "${WORKDIR}/${BP}"
-
-# All Makefile does is creation of devices.tar.gz, which fails in OE build, we use
-# static devices.tar.gz as work around
-# | NOTE: make -j 8 -e MAKEFLAGS=
-# | rm -rf dev
-# | mkdir -p dev
-# | chown 0:0 dev
-# | chown: changing ownership of `dev': Operation not permitted
-# | make: *** [devices.tar.gz] Error 1
-# | WARNING: exit code 1 from a shell command.
-do_compile_prepend() {
-    cp ${WORKDIR}/devices.tar.gz ${B}
-}
-
-do_install() {
-    oe_runmake 'DESTDIR=${D}' install
-    chown -R root:root ${D}${datadir}/debootstrap
-}

meta-citadel/recipes-devtools/debootstrap/debootstrap_1.0.93.bb

@@ -1,40 +0,0 @@
-SUMMARY = "Install a Debian system into a subdirectory"
-HOMEPAGE = "https://wiki.debian.org/Debootstrap"
-SECTION = "devel"
-LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://debian/copyright;md5=1e68ced6e1689d4cd9dac75ff5225608"
-
-inherit pkgconfig
-
-SRC_URI  = "\
-    http://http.debian.net/debian/pool/main/d/debootstrap/debootstrap_${PV}.tar.gz \
-    file://devices.tar.gz;unpack=0 \
-    file://pkgdetails.c \
-"
-
-SRC_URI[md5sum] = "db30bdbf17d63d35a2cf28ba343db734"
-SRC_URI[sha256sum] = "cdad4d2be155bd933acbe4f3479e1765e5f4447fb50564e30e33f7b3b84bd7db"
-
-
-S = "${WORKDIR}/${BPN}"
-
-# All Makefile does is creation of devices.tar.gz, which fails in OE build, we use
-# static devices.tar.gz as work around
-# | NOTE: make -j 8 -e MAKEFLAGS=
-# | rm -rf dev
-# | mkdir -p dev
-# | chown 0:0 dev
-# | chown: changing ownership of `dev': Operation not permitted
-# | make: *** [devices.tar.gz] Error 1
-# | WARNING: exit code 1 from a shell command.
-do_compile_prepend() {
-    cp ${WORKDIR}/devices.tar.gz ${B}
-    ${CC} ${CFLAGS} ${LDFLAGS} ${WORKDIR}/pkgdetails.c -o ${WORKDIR}/pkgdetails
-}
-
-do_install() {
-    oe_runmake 'DESTDIR=${D}' install
-    chown -R root:root ${D}${datadir}/debootstrap
-    install -d ${D}${libdir}/debootstrap
-    install -m 755 ${WORKDIR}/pkgdetails ${D}${libdir}/debootstrap
-}

meta-citadel/recipes-devtools/m4/files/m4-1.4.18-glibc-change-work-around.patch

@@ -1,130 +0,0 @@
-update for glibc libio.h removal in 2.28+
-
-see
-https://src.fedoraproject.org/rpms/m4/c/814d592134fad36df757f9a61422d164ea2c6c9b?branch=master
-
-Upstream-Status: Pending
-Signed-off-by: Khem Raj <raj.khem@gmail.com>
-Index: m4-1.4.18/lib/fflush.c
-===================================================================
---- m4-1.4.18.orig/lib/fflush.c
-+++ m4-1.4.18/lib/fflush.c
-@@ -33,7 +33,7 @@
- #undef fflush
- 
- 
--#if defined _IO_ftrylockfile || __GNU_LIBRARY__ == 1 /* GNU libc, BeOS, Haiku, Linux libc5 */
-+#if defined _IO_EOF_SEEN || __GNU_LIBRARY__ == 1 /* GNU libc, BeOS, Haiku, Linux libc5 */
- 
- /* Clear the stream's ungetc buffer, preserving the value of ftello (fp).  */
- static void
-@@ -72,7 +72,7 @@ clear_ungetc_buffer (FILE *fp)
- 
- #endif
- 
--#if ! (defined _IO_ftrylockfile || __GNU_LIBRARY__ == 1 /* GNU libc, BeOS, Haiku, Linux libc5 */)
-+#if ! (defined _IO_EOF_SEEN || __GNU_LIBRARY__ == 1 /* GNU libc, BeOS, Haiku, Linux libc5 */)
- 
- # if (defined __sferror || defined __DragonFly__ || defined __ANDROID__) && defined __SNPT
- /* FreeBSD, NetBSD, OpenBSD, DragonFly, Mac OS X, Cygwin, Android */
-@@ -148,7 +148,7 @@ rpl_fflush (FILE *stream)
-   if (stream == NULL || ! freading (stream))
-     return fflush (stream);
- 
--#if defined _IO_ftrylockfile || __GNU_LIBRARY__ == 1 /* GNU libc, BeOS, Haiku, Linux libc5 */
-+#if defined _IO_EOF_SEEN || __GNU_LIBRARY__ == 1 /* GNU libc, BeOS, Haiku, Linux libc5 */
- 
-   clear_ungetc_buffer_preserving_position (stream);
- 
-Index: m4-1.4.18/lib/fpending.c
-===================================================================
---- m4-1.4.18.orig/lib/fpending.c
-+++ m4-1.4.18/lib/fpending.c
-@@ -32,7 +32,7 @@ __fpending (FILE *fp)
-   /* Most systems provide FILE as a struct and the necessary bitmask in
-      <stdio.h>, because they need it for implementing getc() and putc() as
-      fast macros.  */
--#if defined _IO_ftrylockfile || __GNU_LIBRARY__ == 1 /* GNU libc, BeOS, Haiku, Linux libc5 */
-+#if defined _IO_EOF_SEEN || __GNU_LIBRARY__ == 1 /* GNU libc, BeOS, Haiku, Linux libc5 */
-   return fp->_IO_write_ptr - fp->_IO_write_base;
- #elif defined __sferror || defined __DragonFly__ || defined __ANDROID__
-   /* FreeBSD, NetBSD, OpenBSD, DragonFly, Mac OS X, Cygwin, Android */
-Index: m4-1.4.18/lib/fpurge.c
-===================================================================
---- m4-1.4.18.orig/lib/fpurge.c
-+++ m4-1.4.18/lib/fpurge.c
-@@ -62,7 +62,7 @@ fpurge (FILE *fp)
-   /* Most systems provide FILE as a struct and the necessary bitmask in
-      <stdio.h>, because they need it for implementing getc() and putc() as
-      fast macros.  */
--# if defined _IO_ftrylockfile || __GNU_LIBRARY__ == 1 /* GNU libc, BeOS, Haiku, Linux libc5 */
-+# if defined _IO_EOF_SEEN || __GNU_LIBRARY__ == 1 /* GNU libc, BeOS, Haiku, Linux libc5 */
-   fp->_IO_read_end = fp->_IO_read_ptr;
-   fp->_IO_write_ptr = fp->_IO_write_base;
-   /* Avoid memory leak when there is an active ungetc buffer.  */
-Index: m4-1.4.18/lib/freadahead.c
-===================================================================
---- m4-1.4.18.orig/lib/freadahead.c
-+++ m4-1.4.18/lib/freadahead.c
-@@ -25,7 +25,7 @@
- size_t
- freadahead (FILE *fp)
- {
--#if defined _IO_ftrylockfile || __GNU_LIBRARY__ == 1 /* GNU libc, BeOS, Haiku, Linux libc5 */
-+#if defined _IO_EOF_SEEN || __GNU_LIBRARY__ == 1 /* GNU libc, BeOS, Haiku, Linux libc5 */
-   if (fp->_IO_write_ptr > fp->_IO_write_base)
-     return 0;
-   return (fp->_IO_read_end - fp->_IO_read_ptr)
-Index: m4-1.4.18/lib/freading.c
-===================================================================
---- m4-1.4.18.orig/lib/freading.c
-+++ m4-1.4.18/lib/freading.c
-@@ -31,7 +31,7 @@ freading (FILE *fp)
-   /* Most systems provide FILE as a struct and the necessary bitmask in
-      <stdio.h>, because they need it for implementing getc() and putc() as
-      fast macros.  */
--# if defined _IO_ftrylockfile || __GNU_LIBRARY__ == 1 /* GNU libc, BeOS, Haiku, Linux libc5 */
-+# if defined _IO_EOF_SEEN || __GNU_LIBRARY__ == 1 /* GNU libc, BeOS, Haiku, Linux libc5 */
-   return ((fp->_flags & _IO_NO_WRITES) != 0
-           || ((fp->_flags & (_IO_NO_READS | _IO_CURRENTLY_PUTTING)) == 0
-               && fp->_IO_read_base != NULL));
-Index: m4-1.4.18/lib/fseeko.c
-===================================================================
---- m4-1.4.18.orig/lib/fseeko.c
-+++ m4-1.4.18/lib/fseeko.c
-@@ -47,7 +47,7 @@ fseeko (FILE *fp, off_t offset, int when
- #endif
- 
-   /* These tests are based on fpurge.c.  */
--#if defined _IO_ftrylockfile || __GNU_LIBRARY__ == 1 /* GNU libc, BeOS, Haiku, Linux libc5 */
-+#if defined _IO_EOF_SEEN || __GNU_LIBRARY__ == 1 /* GNU libc, BeOS, Haiku, Linux libc5 */
-   if (fp->_IO_read_end == fp->_IO_read_ptr
-       && fp->_IO_write_ptr == fp->_IO_write_base
-       && fp->_IO_save_base == NULL)
-@@ -123,7 +123,7 @@ fseeko (FILE *fp, off_t offset, int when
-           return -1;
-         }
- 
--#if defined _IO_ftrylockfile || __GNU_LIBRARY__ == 1 /* GNU libc, BeOS, Haiku, Linux libc5 */
-+#if defined _IO_EOF_SEEN || __GNU_LIBRARY__ == 1 /* GNU libc, BeOS, Haiku, Linux libc5 */
-       fp->_flags &= ~_IO_EOF_SEEN;
-       fp->_offset = pos;
- #elif defined __sferror || defined __DragonFly__ || defined __ANDROID__
-Index: m4-1.4.18/lib/stdio-impl.h
-===================================================================
---- m4-1.4.18.orig/lib/stdio-impl.h
-+++ m4-1.4.18/lib/stdio-impl.h
-@@ -18,6 +18,12 @@
-    the same implementation of stdio extension API, except that some fields
-    have different naming conventions, or their access requires some casts.  */
- 
-+/* Glibc 2.28 made _IO_IN_BACKUP private.  For now, work around this
-+   problem by defining it ourselves.  FIXME: Do not rely on glibc
-+   internals.  */
-+#if !defined _IO_IN_BACKUP && defined _IO_EOF_SEEN
-+# define _IO_IN_BACKUP 0x100
-+#endif
- 
- /* BSD stdio derived implementations.  */
- 
-

meta-citadel/recipes-devtools/m4/m4-native_1.4.18.bbappend

@@ -1,2 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
-SRC_URI += "file://m4-1.4.18-glibc-change-work-around.patch"

meta-citadel/recipes-devtools/m4/m4_1.4.18.bbappend

@@ -1,2 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
-SRC_URI += "file://m4-1.4.18-glibc-change-work-around.patch"

meta-citadel/recipes-support/multipath-tools/files/0001-multipath-tools-add-RDAC-SUN-ArrayStorage-to-hwtable.patch

@@ -1,42 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Xose Vazquez Perez <xose.vazquez@gmail.com>
-Date: Wed, 11 Apr 2018 15:14:13 +0200
-Subject: [PATCH] multipath-tools: add RDAC SUN/ArrayStorage to hwtable
-
-Already in scsi_dh: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/scsi/scsi_dh.c#n70
-
-Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com>
-Cc: Christophe Varoqui <christophe.varoqui@opensvc.com>
-Cc: DM ML <dm-devel@redhat.com>
-Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- libmultipath/hwtable.c | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
-diff --git a/libmultipath/hwtable.c b/libmultipath/hwtable.c
-index 88b4700..827e899 100644
---- a/libmultipath/hwtable.c
-+++ b/libmultipath/hwtable.c
-@@ -890,6 +890,18 @@ static struct hwentry default_hw[] = {
- 		.no_path_retry = 30,
- 	},
- 	{
-+		.vendor        = "SUN",
-+		.product       = "ArrayStorage",
-+		.bl_product    = "Universal Xport",
-+		.pgpolicy      = GROUP_BY_PRIO,
-+		.checker_name  = RDAC,
-+		.features      = "2 pg_init_retries 50",
-+		.hwhandler     = "1 rdac",
-+		.prio_name     = PRIO_RDAC,
-+		.pgfailback    = -FAILBACK_IMMEDIATE,
-+		.no_path_retry = 30,
-+	},
-+	{
- 		/* ZFS Storage Appliances */
- 		.vendor        = "SUN",
- 		.product       = "(Sun Storage|ZFS Storage|COMSTAR)",
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0002-multipath-tools-remove-c-from-__cpluscplus-misspelle.patch

@@ -1,33 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Xose Vazquez Perez <xose.vazquez@gmail.com>
-Date: Tue, 24 Apr 2018 15:03:40 +0200
-Subject: [PATCH] multipath-tools: remove "c" from __cpluscplus, misspelled
-
-found by cppcheck(http://cppcheck.sf.net/):
-[libmpathcmd/mpath_cmd.h:24]: (error) Invalid number of character '{' when these macros are defined: '__cpluscplus'.
-
-Cc: Benjamin Marzinski <bmarzins@redhat.com>
-Cc: Christophe Varoqui <christophe.varoqui@opensvc.com>
-Cc: DM ML <dm-devel@redhat.com>
-Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- libmpathcmd/mpath_cmd.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/libmpathcmd/mpath_cmd.h b/libmpathcmd/mpath_cmd.h
-index aaa8da9..df9d938 100644
---- a/libmpathcmd/mpath_cmd.h
-+++ b/libmpathcmd/mpath_cmd.h
-@@ -20,7 +20,7 @@
- #ifndef LIB_MPATH_CMD_H
- #define LIB_MPATH_CMD_H
- 
--#ifdef __cpluscplus
-+#ifdef __cplusplus
- extern "C" {
- #endif
- 
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0003-multipath-tools-remove-emacs-autoconfig-of-kpartx-gp.patch

@@ -1,43 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Xose Vazquez Perez <xose.vazquez@gmail.com>
-Date: Thu, 12 Apr 2018 18:17:13 +0200
-Subject: [PATCH] multipath-tools: remove emacs autoconfig of kpartx/gpt.h
-
-Cc: Christophe Varoqui <christophe.varoqui@opensvc.com>
-Cc: DM ML <dm-devel@redhat.com>
-Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- kpartx/gpt.h | 19 -------------------
- 1 file changed, 19 deletions(-)
-
-diff --git a/kpartx/gpt.h b/kpartx/gpt.h
-index 66ce8f1..7bb54b7 100644
---- a/kpartx/gpt.h
-+++ b/kpartx/gpt.h
-@@ -109,22 +109,3 @@ int read_gpt_pt (int fd, struct slice all, struct slice *sp, int ns);
- 
- 
- #endif
--
--/*
-- * Overrides for Emacs so that we follow Linus's tabbing style.
-- * Emacs will notice this stuff at the end of the file and automatically
-- * adjust the settings for this buffer only.  This must remain at the end
-- * of the file.
-- * ---------------------------------------------------------------------------
-- * Local variables:
-- * c-indent-level: 4
-- * c-brace-imaginary-offset: 0
-- * c-brace-offset: -4
-- * c-argdecl-indent: 4
-- * c-label-offset: -4
-- * c-continued-statement-offset: 4
-- * c-continued-brace-offset: 0
-- * indent-tabs-mode: nil
-- * tab-width: 8
-- * End:
-- */
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0004-multipath-tools-replace-FSF-address-with-a-www-point.patch

@@ -1,191 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Xose Vazquez Perez <xose.vazquez@gmail.com>
-Date: Fri, 11 May 2018 15:42:43 +0200
-Subject: [PATCH] multipath-tools: replace FSF address with a www pointer
-
-Less prone to future modifications, new FSF licences
-point exactly to this url: <http://www.gnu.org/licenses/>.
-And sending a smail to FSF is outdated.
-
-First clean up was done in 5619a39c433ac3d10a88079593cec1aa6472cbeb
-
-Cc: Martin Wilck <mwilck@suse.com>
-Cc: Benjamin Marzinski <bmarzins@redhat.com>
-Cc: Christophe Varoqui <christophe.varoqui@opensvc.com>
-Cc: DM ML <dm-devel@redhat.com>
-Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- libmultipath/dm-generic.c   | 4 +---
- libmultipath/dm-generic.h   | 4 +---
- libmultipath/foreign.c      | 4 +---
- libmultipath/foreign.h      | 4 +---
- libmultipath/foreign/nvme.c | 4 +---
- libmultipath/generic.c      | 4 +---
- libmultipath/generic.h      | 4 +---
- tests/dmevents.c            | 2 +-
- tests/parser.c              | 2 +-
- tests/uevent.c              | 2 +-
- tests/util.c                | 2 +-
- 11 files changed, 11 insertions(+), 25 deletions(-)
-
-diff --git a/libmultipath/dm-generic.c b/libmultipath/dm-generic.c
-index bdc9ca0..d752991 100644
---- a/libmultipath/dm-generic.c
-+++ b/libmultipath/dm-generic.c
-@@ -12,9 +12,7 @@
-   GNU General Public License for more details.
- 
-   You should have received a copy of the GNU General Public License
--  along with this program; if not, write to the Free Software
--  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
--  USA.
-+  along with this program.  If not, see <https://www.gnu.org/licenses/>.
-  */
- 
- #include <stdint.h>
-diff --git a/libmultipath/dm-generic.h b/libmultipath/dm-generic.h
-index 5d59724..986429f 100644
---- a/libmultipath/dm-generic.h
-+++ b/libmultipath/dm-generic.h
-@@ -12,9 +12,7 @@
-   GNU General Public License for more details.
- 
-   You should have received a copy of the GNU General Public License
--  along with this program; if not, write to the Free Software
--  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
--  USA.
-+  along with this program.  If not, see <https://www.gnu.org/licenses/>.
-  */
- #ifndef _DM_GENERIC_H
- #define _DM_GENERIC_H
-diff --git a/libmultipath/foreign.c b/libmultipath/foreign.c
-index 7217184..80b399b 100644
---- a/libmultipath/foreign.c
-+++ b/libmultipath/foreign.c
-@@ -12,9 +12,7 @@
-   GNU General Public License for more details.
- 
-   You should have received a copy of the GNU General Public License
--  along with this program; if not, write to the Free Software
--  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
--  USA.
-+  along with this program.  If not, see <https://www.gnu.org/licenses/>.
- */
- 
- #include <sys/sysmacros.h>
-diff --git a/libmultipath/foreign.h b/libmultipath/foreign.h
-index 973f368..697f12f 100644
---- a/libmultipath/foreign.h
-+++ b/libmultipath/foreign.h
-@@ -12,9 +12,7 @@
-   GNU General Public License for more details.
- 
-   You should have received a copy of the GNU General Public License
--  along with this program; if not, write to the Free Software
--  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
--  USA.
-+  along with this program.  If not, see <https://www.gnu.org/licenses/>.
- */
- #ifndef _FOREIGN_H
- #define _FOREIGN_H
-diff --git a/libmultipath/foreign/nvme.c b/libmultipath/foreign/nvme.c
-index 235f75d..280b6bd 100644
---- a/libmultipath/foreign/nvme.c
-+++ b/libmultipath/foreign/nvme.c
-@@ -12,9 +12,7 @@
-   GNU General Public License for more details.
- 
-   You should have received a copy of the GNU General Public License
--  along with this program; if not, write to the Free Software
--  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
--  USA.
-+  along with this program.  If not, see <https://www.gnu.org/licenses/>.
- */
- 
- #include <sys/sysmacros.h>
-diff --git a/libmultipath/generic.c b/libmultipath/generic.c
-index 6f7a2cd..0d1e632 100644
---- a/libmultipath/generic.c
-+++ b/libmultipath/generic.c
-@@ -12,9 +12,7 @@
-   GNU General Public License for more details.
- 
-   You should have received a copy of the GNU General Public License
--  along with this program; if not, write to the Free Software
--  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
--  USA.
-+  along with this program.  If not, see <https://www.gnu.org/licenses/>.
-  */
- 
- 
-diff --git a/libmultipath/generic.h b/libmultipath/generic.h
-index 7f7fe66..6346ffe 100644
---- a/libmultipath/generic.h
-+++ b/libmultipath/generic.h
-@@ -12,9 +12,7 @@
-   GNU General Public License for more details.
- 
-   You should have received a copy of the GNU General Public License
--  along with this program; if not, write to the Free Software
--  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
--  USA.
-+  along with this program.  If not, see <https://www.gnu.org/licenses/>.
-  */
- #ifndef _GENERIC_H
- #define _GENERIC_H
-diff --git a/tests/dmevents.c b/tests/dmevents.c
-index bba51dc..3399c81 100644
---- a/tests/dmevents.c
-+++ b/tests/dmevents.c
-@@ -12,7 +12,7 @@
-  * GNU General Public License for more details.
-  *
-  * You should have received a copy of the GNU General Public License
-- * along with this program; if not, write to the Free Software
-+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
-  *
-  */
- 
-diff --git a/tests/parser.c b/tests/parser.c
-index a7e7598..29859da 100644
---- a/tests/parser.c
-+++ b/tests/parser.c
-@@ -12,7 +12,7 @@
-  * GNU General Public License for more details.
-  *
-  * You should have received a copy of the GNU General Public License
-- * along with this program; if not, write to the Free Software
-+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
-  *
-  */
- 
-diff --git a/tests/uevent.c b/tests/uevent.c
-index acfcb14..b0d0bfd 100644
---- a/tests/uevent.c
-+++ b/tests/uevent.c
-@@ -12,7 +12,7 @@
-  * GNU General Public License for more details.
-  *
-  * You should have received a copy of the GNU General Public License
-- * along with this program; if not, write to the Free Software
-+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
-  *
-  */
- 
-diff --git a/tests/util.c b/tests/util.c
-index 113b134..839effd 100644
---- a/tests/util.c
-+++ b/tests/util.c
-@@ -12,7 +12,7 @@
-  * GNU General Public License for more details.
-  *
-  * You should have received a copy of the GNU General Public License
-- * along with this program; if not, write to the Free Software
-+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
-  *
-  */
- 
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0005-multipath-tools-Remove-trailing-leading-whitespaces-.patch

@@ -1,156 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Xose Vazquez Perez <xose.vazquez@gmail.com>
-Date: Fri, 11 May 2018 15:43:11 +0200
-Subject: [PATCH] multipath-tools: Remove trailing/leading whitespaces and
- reformat code
-
-Cc: Christophe Varoqui <christophe.varoqui@opensvc.com>
-Cc: device-mapper development <dm-devel@redhat.com>
-Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- Makefile.inc           | 23 +++++++++++------------
- kpartx/mac.h           |  2 +-
- kpartx/test-kpartx     |  2 +-
- libmpathcmd/Makefile   |  2 +-
- libmultipath/hwtable.c | 14 +++++++-------
- libmultipath/print.h   |  2 +-
- multipathd/main.h      |  6 +++---
- 7 files changed, 25 insertions(+), 26 deletions(-)
-
-diff --git a/Makefile.inc b/Makefile.inc
-index 57a1835..af2f5ba 100644
---- a/Makefile.inc
-+++ b/Makefile.inc
-@@ -103,21 +103,20 @@ LDFLAGS		= -Wl,-z,relro -Wl,-z,now
- BIN_LDFLAGS	= -pie
- 
- # Check whether a function with name $1 has been declared in header file $2.
--check_func =								       \
--    $(shell								       \
-+check_func = $(shell \
- 	if grep -Eq "^[^[:blank:]]+[[:blank:]]+$1[[:blank:]]*(.*)*" "$2"; then \
--	   found=1;							       \
--	   status="yes";						       \
--	else								       \
--	   found=0;							       \
--	   status="no";							       \
--	fi;								       \
--	echo 1>&2 "Checking for $1 in $2 ... $$status";			       \
--	echo "$$found"							       \
--    )
-+		found=1; \
-+		status="yes"; \
-+	else \
-+		found=0; \
-+		status="no"; \
-+	fi; \
-+	echo 1>&2 "Checking for $1 in $2 ... $$status"; \
-+	echo "$$found" \
-+	)
- 
- # Checker whether a file with name $1 exists
--check_file = $(shell	\
-+check_file = $(shell \
- 	if [ -f "$1" ]; then \
- 		found=1; \
- 		status="yes"; \
-diff --git a/kpartx/mac.h b/kpartx/mac.h
-index a44cf38..55c3ec9 100644
---- a/kpartx/mac.h
-+++ b/kpartx/mac.h
-@@ -24,7 +24,7 @@ struct mac_driver_desc {
- 	uint16_t  signature;      /* expected to be MAC_DRIVER_MAGIC */
- 	uint16_t  block_size;
- 	uint32_t  block_count;
--    /* ... more stuff */
-+	/* ... more stuff */
- };
- 
- #endif
-diff --git a/kpartx/test-kpartx b/kpartx/test-kpartx
-index 9cee20f..d2001dc 100755
---- a/kpartx/test-kpartx
-+++ b/kpartx/test-kpartx
-@@ -131,7 +131,7 @@ step "create DM devices (spans)"
- # They also serve as DM devices to test partition removal on those.
- 
- TABLE="\
--0 $((SIZE/SECTSIZ-OFFS)) linear $DEV1 $OFFS 
-+0 $((SIZE/SECTSIZ-OFFS)) linear $DEV1 $OFFS
- $((SIZE/SECTSIZ-OFFS)) $((SIZE/SECTSIZ-OFFS)) linear $DEV2 $OFFS"
- 
- SPAN1=kpt
-diff --git a/libmpathcmd/Makefile b/libmpathcmd/Makefile
-index 53c0899..0f6b816 100644
---- a/libmpathcmd/Makefile
-+++ b/libmpathcmd/Makefile
-@@ -27,7 +27,7 @@ uninstall:
- 	$(RM) $(DESTDIR)$(includedir)/mpath_cmd.h
- 
- clean: dep_clean
--	$(RM) core *.a *.o *.so *.so.* *.gz 
-+	$(RM) core *.a *.o *.so *.so.* *.gz
- 
- include $(wildcard $(OBJS:.o=.d))
- 
-diff --git a/libmultipath/hwtable.c b/libmultipath/hwtable.c
-index 827e899..2ca6888 100644
---- a/libmultipath/hwtable.c
-+++ b/libmultipath/hwtable.c
-@@ -78,13 +78,13 @@
- #endif
- 
- static struct hwentry default_hw[] = {
--       /*
--	* Generic NVMe
--	*
--	* Due to the parsing logic in find_hwe(), generic entries
--	* have to be put on top of this list, and more specific ones
--	* below.
--	*/
-+	/*
-+	 * Generic NVMe devices
-+	 *
-+	 * Due to the parsing logic in find_hwe(), generic entries
-+	 * have to be put on top of this list, and more specific ones
-+	 * below.
-+	 */
- 	{
- 		.vendor        = "NVME",
- 		.product       = ".*",
-diff --git a/libmultipath/print.h b/libmultipath/print.h
-index 7ba6438..9b5a23a 100644
---- a/libmultipath/print.h
-+++ b/libmultipath/print.h
-@@ -113,7 +113,7 @@ int _snprint_multipath (const struct gen_multipath *, char *, int,
- 			const char *, int);
- #define snprint_multipath(buf, len, fmt, mp, v)				\
- 	_snprint_multipath(dm_multipath_to_gen(mp), buf, len, fmt,  v)
--int _snprint_multipath_topology (const struct gen_multipath *, char *, int, 
-+int _snprint_multipath_topology (const struct gen_multipath *, char *, int,
- 				 int verbosity);
- #define snprint_multipath_topology(buf, len, mpp, v) \
- 	_snprint_multipath_topology (dm_multipath_to_gen(mpp), buf, len, v)
-diff --git a/multipathd/main.h b/multipathd/main.h
-index af39558..8fd426b 100644
---- a/multipathd/main.h
-+++ b/multipathd/main.h
-@@ -29,11 +29,11 @@ int ev_remove_map (char *, char *, int, struct vectors *);
- int set_config_state(enum daemon_status);
- void * mpath_alloc_prin_response(int prin_sa);
- int prin_do_scsi_ioctl(char *, int rq_servact, struct prin_resp * resp,
--       int noisy);
-+		       int noisy);
- void dumpHex(const char * , int len, int no_ascii);
- int prout_do_scsi_ioctl(char * , int rq_servact, int rq_scope,
--       unsigned int rq_type, struct prout_param_descriptor *param,
--       int noisy);
-+			unsigned int rq_type,
-+			struct prout_param_descriptor *param, int noisy);
- int mpath_pr_event_handle(struct path *pp);
- void * mpath_pr_event_handler_fn (void * );
- int update_map_pr(struct multipath *mpp);
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0006-multipath-tools-fix-compilation-with-musl-libc.patch

@@ -1,58 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Xose Vazquez Perez <xose.vazquez@gmail.com>
-Date: Fri, 11 May 2018 18:39:44 +0200
-Subject: [PATCH] multipath-tools: fix compilation with musl libc
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-In file included from alias.c:15:
-file.h:9:47: error: unknown type name ‘mode_t’; did you mean ‘time_t’?
- int ensure_directories_exist(const char *str, mode_t dir_mode);
-                                               ^~~~~~
-                                               time_t
-
-sysfs.c: In function ‘sysfs_is_multipathed’:
-sysfs.c:304:15: error: ‘PATH_MAX’ undeclared (first use in this function); did you mean ‘PATH_UP’?
-  char pathbuf[PATH_MAX];
-               ^~~~~~~~
-               PATH_UP
-
-Cc: Martin Wilck <mwilck@suse.com>
-Cc: Christophe Varoqui <christophe.varoqui@opensvc.com>
-Cc: DM ML <dm-devel@redhat.com>
-Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- libmultipath/file.h  | 2 ++
- libmultipath/sysfs.c | 1 +
- 2 files changed, 3 insertions(+)
-
-diff --git a/libmultipath/file.h b/libmultipath/file.h
-index 29520c7..3c75c90 100644
---- a/libmultipath/file.h
-+++ b/libmultipath/file.h
-@@ -5,6 +5,8 @@
- #ifndef _FILE_H
- #define _FILE_H
- 
-+#include <sys/stat.h>
-+
- #define FILE_TIMEOUT 30
- int ensure_directories_exist(const char *str, mode_t dir_mode);
- int open_file(const char *file, int *can_write, const char *header);
-diff --git a/libmultipath/sysfs.c b/libmultipath/sysfs.c
-index ee72e6a..16e0a73 100644
---- a/libmultipath/sysfs.c
-+++ b/libmultipath/sysfs.c
-@@ -28,6 +28,7 @@
- #include <dirent.h>
- #include <libudev.h>
- #include <fnmatch.h>
-+#include <limits.h>
- 
- #include "checkers.h"
- #include "vector.h"
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0007-multipath-tools-add-x-to-doc-preclean.pl-and-split-m.patch

@@ -1,27 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Xose Vazquez Perez <xose.vazquez@gmail.com>
-Date: Sun, 13 May 2018 00:39:41 +0200
-Subject: [PATCH] multipath-tools: add +x to doc-preclean.pl and split-man.pl
-
-It is not strictly necessary, but it helps identify bin files.
-
-Cc: Christophe Varoqui <christophe.varoqui@opensvc.com>
-Cc: DM ML <dm-devel@redhat.com>
-Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- libdmmp/docs/doc-preclean.pl | 0
- libdmmp/docs/split-man.pl    | 0
- 2 files changed, 0 insertions(+), 0 deletions(-)
- mode change 100644 => 100755 libdmmp/docs/doc-preclean.pl
- mode change 100644 => 100755 libdmmp/docs/split-man.pl
-
-diff --git a/libdmmp/docs/doc-preclean.pl b/libdmmp/docs/doc-preclean.pl
-old mode 100644
-new mode 100755
-diff --git a/libdmmp/docs/split-man.pl b/libdmmp/docs/split-man.pl
-old mode 100644
-new mode 100755
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0008-multipath-tools-refresh-kernel-doc-from-kernel-sourc.patch

@@ -1,784 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Xose Vazquez Perez <xose.vazquez@gmail.com>
-Date: Sun, 13 May 2018 00:39:42 +0200
-Subject: [PATCH] multipath-tools: refresh kernel-doc from kernel sources
-
-Cc: Gris Ge <fge@redhat.com>
-Cc: Christophe Varoqui <christophe.varoqui@opensvc.com>
-Cc: device-mapper development <dm-devel@redhat.com>
-Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- libdmmp/docs/kernel-doc | 671 ++++++++++++++++++++++++++----------------------
- 1 file changed, 368 insertions(+), 303 deletions(-)
-
-diff --git a/libdmmp/docs/kernel-doc b/libdmmp/docs/kernel-doc
-index fee8952..0057d8e 100755
---- a/libdmmp/docs/kernel-doc
-+++ b/libdmmp/docs/kernel-doc
-@@ -1,4 +1,5 @@
- #!/usr/bin/env perl
-+# SPDX-License-Identifier: GPL-2.0
- 
- use warnings;
- use strict;
-@@ -328,13 +329,15 @@ my $lineprefix="";
- use constant {
-     STATE_NORMAL        => 0, # normal code
-     STATE_NAME          => 1, # looking for function name
--    STATE_FIELD         => 2, # scanning field start
--    STATE_PROTO         => 3, # scanning prototype
--    STATE_DOCBLOCK      => 4, # documentation block
--    STATE_INLINE        => 5, # gathering documentation outside main block
-+    STATE_BODY_MAYBE    => 2, # body - or maybe more description
-+    STATE_BODY          => 3, # the body of the comment
-+    STATE_PROTO         => 4, # scanning prototype
-+    STATE_DOCBLOCK      => 5, # documentation block
-+    STATE_INLINE        => 6, # gathering documentation outside main block
- };
- my $state;
- my $in_doc_sect;
-+my $leading_space;
- 
- # Inline documentation state
- use constant {
-@@ -363,7 +366,7 @@ my $doc_sect = $doc_com .
- my $doc_content = $doc_com_body . '(.*)';
- my $doc_block = $doc_com . 'DOC:\s*(.*)?';
- my $doc_inline_start = '^\s*/\*\*\s*$';
--my $doc_inline_sect = '\s*\*\s*(@[\w\s]+):(.*)';
-+my $doc_inline_sect = '\s*\*\s*(@\s*[\w][\w\.]*\s*):(.*)';
- my $doc_inline_end = '^\s*\*/\s*$';
- my $doc_inline_oneline = '^\s*/\*\*\s*(@[\w\s]+):\s*(.*)\s*\*/\s*$';
- my $export_symbol = '^\s*EXPORT_SYMBOL(_GPL)?\s*\(\s*(\w+)\s*\)\s*;';
-@@ -553,10 +556,9 @@ sub output_highlight {
- 	}
- 	if ($line eq ""){
- 	    if (! $output_preformatted) {
--		print $lineprefix, local_unescape($blankline);
-+		print $lineprefix, $blankline;
- 	    }
- 	} else {
--	    $line =~ s/\\\\\\/\&/g;
- 	    if ($output_mode eq "man" && substr($line, 0, 1) eq ".") {
- 		print "\\&$line";
- 	    } else {
-@@ -747,17 +749,73 @@ sub output_blockhead_rst(%) {
-     }
- }
- 
--sub output_highlight_rst {
--    my $contents = join "\n",@_;
--    my $line;
--
--    # undo the evil effects of xml_escape() earlier
--    $contents = xml_unescape($contents);
--
-+#
-+# Apply the RST highlights to a sub-block of text.
-+#   
-+sub highlight_block($) {
-+    # The dohighlight kludge requires the text be called $contents
-+    my $contents = shift;
-     eval $dohighlight;
-     die $@ if $@;
-+    return $contents;
-+}
- 
--    foreach $line (split "\n", $contents) {
-+#
-+# Regexes used only here.
-+#
-+my $sphinx_literal = '^[^.].*::$';
-+my $sphinx_cblock = '^\.\.\ +code-block::';
-+
-+sub output_highlight_rst {
-+    my $input = join "\n",@_;
-+    my $output = "";
-+    my $line;
-+    my $in_literal = 0;
-+    my $litprefix;
-+    my $block = "";
-+
-+    foreach $line (split "\n",$input) {
-+	#
-+	# If we're in a literal block, see if we should drop out
-+	# of it.  Otherwise pass the line straight through unmunged.
-+	#
-+	if ($in_literal) {
-+	    if (! ($line =~ /^\s*$/)) {
-+		#
-+		# If this is the first non-blank line in a literal
-+		# block we need to figure out what the proper indent is.
-+		#
-+		if ($litprefix eq "") {
-+		    $line =~ /^(\s*)/;
-+		    $litprefix = '^' . $1;
-+		    $output .= $line . "\n";
-+		} elsif (! ($line =~ /$litprefix/)) {
-+		    $in_literal = 0;
-+		} else {
-+		    $output .= $line . "\n";
-+		}
-+	    } else {
-+		$output .= $line . "\n";
-+	    }
-+	}
-+	#
-+	# Not in a literal block (or just dropped out)
-+	#
-+	if (! $in_literal) {
-+	    $block .= $line . "\n";
-+	    if (($line =~ /$sphinx_literal/) || ($line =~ /$sphinx_cblock/)) {
-+		$in_literal = 1;
-+		$litprefix = "";
-+		$output .= highlight_block($block);
-+		$block = ""
-+	    }
-+	}
-+    }
-+
-+    if ($block) {
-+	$output .= highlight_block($block);
-+    }
-+    foreach $line (split "\n", $output) {
- 	print $lineprefix . $line . "\n";
-     }
- }
-@@ -1062,7 +1120,7 @@ sub dump_struct($$) {
- 					# Handle bitmaps
- 					$arg =~ s/:\s*\d+\s*//g;
- 					# Handle arrays
--					$arg =~ s/\[\S+\]//g;
-+					$arg =~ s/\[.*\]//g;
- 					# The type may have multiple words,
- 					# and multiple IDs can be defined, like:
- 					#	const struct foo, *bar, foobar
-@@ -1422,8 +1480,6 @@ sub push_parameter($$$$) {
- 		}
- 	}
- 
--	$param = xml_escape($param);
--
- 	# strip spaces from $param so that it is one continuous string
- 	# on @parameterlist;
- 	# this fixes a problem where check_sections() cannot find
-@@ -1522,6 +1578,7 @@ sub dump_function($$) {
-     $prototype =~ s/__meminit +//;
-     $prototype =~ s/__must_check +//;
-     $prototype =~ s/__weak +//;
-+    $prototype =~ s/__sched +//;
-     my $define = $prototype =~ s/^#\s*define\s+//; #ak added
-     $prototype =~ s/__attribute__\s*\(\(
-             (?:
-@@ -1748,47 +1805,6 @@ sub process_proto_type($$) {
-     }
- }
- 
--# xml_escape: replace <, >, and & in the text stream;
--#
--# however, formatting controls that are generated internally/locally in the
--# kernel-doc script are not escaped here; instead, they begin life like
--# $blankline_html (4 of '\' followed by a mnemonic + ':'), then these strings
--# are converted to their mnemonic-expected output, without the 4 * '\' & ':',
--# just before actual output; (this is done by local_unescape())
--sub xml_escape($) {
--	my $text = shift;
--	if ($output_mode eq "man") {
--		return $text;
--	}
--	$text =~ s/\&/\\\\\\amp;/g;
--	$text =~ s/\</\\\\\\lt;/g;
--	$text =~ s/\>/\\\\\\gt;/g;
--	return $text;
--}
--
--# xml_unescape: reverse the effects of xml_escape
--sub xml_unescape($) {
--	my $text = shift;
--	if ($output_mode eq "man") {
--		return $text;
--	}
--	$text =~ s/\\\\\\amp;/\&/g;
--	$text =~ s/\\\\\\lt;/</g;
--	$text =~ s/\\\\\\gt;/>/g;
--	return $text;
--}
--
--# convert local escape strings to html
--# local escape strings look like:  '\\\\menmonic:' (that's 4 backslashes)
--sub local_unescape($) {
--	my $text = shift;
--	if ($output_mode eq "man") {
--		return $text;
--	}
--	$text =~ s/\\\\\\\\lt:/</g;
--	$text =~ s/\\\\\\\\gt:/>/g;
--	return $text;
--}
- 
- sub map_filename($) {
-     my $file;
-@@ -1826,15 +1842,291 @@ sub process_export_file($) {
-     close(IN);
- }
- 
--sub process_file($) {
--    my $file;
-+#
-+# Parsers for the various processing states.
-+#
-+# STATE_NORMAL: looking for the /** to begin everything.
-+#
-+sub process_normal() {
-+    if (/$doc_start/o) {
-+	$state = STATE_NAME;	# next line is always the function name
-+	$in_doc_sect = 0;
-+	$declaration_start_line = $. + 1;
-+    }
-+}
-+
-+#
-+# STATE_NAME: Looking for the "name - description" line
-+#
-+sub process_name($$) {
-+    my $file = shift;
-     my $identifier;
--    my $func;
-     my $descr;
--    my $in_purpose = 0;
-+
-+    if (/$doc_block/o) {
-+	$state = STATE_DOCBLOCK;
-+	$contents = "";
-+	$new_start_line = $. + 1;
-+
-+	if ( $1 eq "" ) {
-+	    $section = $section_intro;
-+	} else {
-+	    $section = $1;
-+	}
-+    }
-+    elsif (/$doc_decl/o) {
-+	$identifier = $1;
-+	if (/\s*([\w\s]+?)(\(\))?\s*-/) {
-+	    $identifier = $1;
-+	}
-+
-+	$state = STATE_BODY;
-+	# if there's no @param blocks need to set up default section
-+	# here
-+	$contents = "";
-+	$section = $section_default;
-+	$new_start_line = $. + 1;
-+	if (/-(.*)/) {
-+	    # strip leading/trailing/multiple spaces
-+	    $descr= $1;
-+	    $descr =~ s/^\s*//;
-+	    $descr =~ s/\s*$//;
-+	    $descr =~ s/\s+/ /g;
-+	    $declaration_purpose = $descr;
-+	    $state = STATE_BODY_MAYBE;
-+	} else {
-+	    $declaration_purpose = "";
-+	}
-+
-+	if (($declaration_purpose eq "") && $verbose) {
-+	    print STDERR "${file}:$.: warning: missing initial short description on line:\n";
-+	    print STDERR $_;
-+	    ++$warnings;
-+	}
-+
-+	if ($identifier =~ m/^struct/) {
-+	    $decl_type = 'struct';
-+	} elsif ($identifier =~ m/^union/) {
-+	    $decl_type = 'union';
-+	} elsif ($identifier =~ m/^enum/) {
-+	    $decl_type = 'enum';
-+	} elsif ($identifier =~ m/^typedef/) {
-+	    $decl_type = 'typedef';
-+	} else {
-+	    $decl_type = 'function';
-+	}
-+
-+	if ($verbose) {
-+	    print STDERR "${file}:$.: info: Scanning doc for $identifier\n";
-+	}
-+    } else {
-+	print STDERR "${file}:$.: warning: Cannot understand $_ on line $.",
-+	    " - I thought it was a doc line\n";
-+	++$warnings;
-+	$state = STATE_NORMAL;
-+    }
-+}
-+
-+
-+#
-+# STATE_BODY and STATE_BODY_MAYBE: the bulk of a kerneldoc comment.
-+#
-+sub process_body($$) {
-+    my $file = shift;
-+
-+    if (/$doc_sect/i) { # case insensitive for supported section names
-+	$newsection = $1;
-+	$newcontents = $2;
-+
-+	# map the supported section names to the canonical names
-+	if ($newsection =~ m/^description$/i) {
-+	    $newsection = $section_default;
-+	} elsif ($newsection =~ m/^context$/i) {
-+	    $newsection = $section_context;
-+	} elsif ($newsection =~ m/^returns?$/i) {
-+	    $newsection = $section_return;
-+	} elsif ($newsection =~ m/^\@return$/) {
-+	    # special: @return is a section, not a param description
-+	    $newsection = $section_return;
-+	}
-+
-+	if (($contents ne "") && ($contents ne "\n")) {
-+	    if (!$in_doc_sect && $verbose) {
-+		print STDERR "${file}:$.: warning: contents before sections\n";
-+		++$warnings;
-+	    }
-+	    dump_section($file, $section, $contents);
-+	    $section = $section_default;
-+	}
-+
-+	$in_doc_sect = 1;
-+	$state = STATE_BODY;
-+	$contents = $newcontents;
-+	$new_start_line = $.;
-+	while (substr($contents, 0, 1) eq " ") {
-+	    $contents = substr($contents, 1);
-+	}
-+	if ($contents ne "") {
-+	    $contents .= "\n";
-+	}
-+	$section = $newsection;
-+	$leading_space = undef;
-+    } elsif (/$doc_end/) {
-+	if (($contents ne "") && ($contents ne "\n")) {
-+	    dump_section($file, $section, $contents);
-+	    $section = $section_default;
-+	    $contents = "";
-+	}
-+	# look for doc_com + <text> + doc_end:
-+	if ($_ =~ m'\s*\*\s*[a-zA-Z_0-9:\.]+\*/') {
-+	    print STDERR "${file}:$.: warning: suspicious ending line: $_";
-+	    ++$warnings;
-+	}
-+
-+	$prototype = "";
-+	$state = STATE_PROTO;
-+	$brcount = 0;
-+    } elsif (/$doc_content/) {
-+	# miguel-style comment kludge, look for blank lines after
-+	# @parameter line to signify start of description
-+	if ($1 eq "") {
-+	    if ($section =~ m/^@/ || $section eq $section_context) {
-+		dump_section($file, $section, $contents);
-+		$section = $section_default;
-+		$contents = "";
-+		$new_start_line = $.;
-+	    } else {
-+		$contents .= "\n";
-+	    }
-+	    $state = STATE_BODY;
-+	} elsif ($state == STATE_BODY_MAYBE) {
-+	    # Continued declaration purpose
-+	    chomp($declaration_purpose);
-+	    $declaration_purpose .= " " . $1;
-+	    $declaration_purpose =~ s/\s+/ /g;
-+	} else {
-+	    my $cont = $1;
-+	    if ($section =~ m/^@/ || $section eq $section_context) {
-+		if (!defined $leading_space) {
-+		    if ($cont =~ m/^(\s+)/) {
-+			$leading_space = $1;
-+		    } else {
-+			$leading_space = "";
-+		    }
-+		}
-+		$cont =~ s/^$leading_space//;
-+	    }
-+	    $contents .= $cont . "\n";
-+	}
-+    } else {
-+	# i dont know - bad line?  ignore.
-+	print STDERR "${file}:$.: warning: bad line: $_";
-+	++$warnings;
-+    }
-+}
-+
-+
-+#
-+# STATE_PROTO: reading a function/whatever prototype.
-+#
-+sub process_proto($$) {
-+    my $file = shift;
-+
-+    if (/$doc_inline_oneline/) {
-+	$section = $1;
-+	$contents = $2;
-+	if ($contents ne "") {
-+	    $contents .= "\n";
-+	    dump_section($file, $section, $contents);
-+	    $section = $section_default;
-+	    $contents = "";
-+	}
-+    } elsif (/$doc_inline_start/) {
-+	$state = STATE_INLINE;
-+	$inline_doc_state = STATE_INLINE_NAME;
-+    } elsif ($decl_type eq 'function') {
-+	process_proto_function($_, $file);
-+    } else {
-+	process_proto_type($_, $file);
-+    }
-+}
-+
-+#
-+# STATE_DOCBLOCK: within a DOC: block.
-+#
-+sub process_docblock($$) {
-+    my $file = shift;
-+
-+    if (/$doc_end/) {
-+	dump_doc_section($file, $section, $contents);
-+	$section = $section_default;
-+	$contents = "";
-+	$function = "";
-+	%parameterdescs = ();
-+	%parametertypes = ();
-+	@parameterlist = ();
-+	%sections = ();
-+	@sectionlist = ();
-+	$prototype = "";
-+	$state = STATE_NORMAL;
-+    } elsif (/$doc_content/) {
-+	if ( $1 eq "" )	{
-+	    $contents .= $blankline;
-+	} else {
-+	    $contents .= $1 . "\n";
-+	}
-+    }
-+}
-+
-+#
-+# STATE_INLINE: docbook comments within a prototype.
-+#
-+sub process_inline($$) {
-+    my $file = shift;
-+
-+    # First line (state 1) needs to be a @parameter
-+    if ($inline_doc_state == STATE_INLINE_NAME && /$doc_inline_sect/o) {
-+	$section = $1;
-+	$contents = $2;
-+	$new_start_line = $.;
-+	if ($contents ne "") {
-+	    while (substr($contents, 0, 1) eq " ") {
-+		$contents = substr($contents, 1);
-+	    }
-+	    $contents .= "\n";
-+	}
-+	$inline_doc_state = STATE_INLINE_TEXT;
-+	# Documentation block end */
-+    } elsif (/$doc_inline_end/) {
-+	if (($contents ne "") && ($contents ne "\n")) {
-+	    dump_section($file, $section, $contents);
-+	    $section = $section_default;
-+	    $contents = "";
-+	}
-+	$state = STATE_PROTO;
-+	$inline_doc_state = STATE_INLINE_NA;
-+	# Regular text
-+    } elsif (/$doc_content/) {
-+	if ($inline_doc_state == STATE_INLINE_TEXT) {
-+	    $contents .= $1 . "\n";
-+	    # nuke leading blank lines
-+	    if ($contents =~ /^\s*$/) {
-+		$contents = "";
-+	    }
-+	} elsif ($inline_doc_state == STATE_INLINE_NAME) {
-+	    $inline_doc_state = STATE_INLINE_ERROR;
-+	    print STDERR "${file}:$.: warning: ";
-+	    print STDERR "Incorrect use of kernel-doc format: $_";
-+	    ++$warnings;
-+	}
-+    }
-+}
-+
-+
-+sub process_file($) {
-+    my $file;
-     my $initial_section_counter = $section_counter;
-     my ($orig_file) = @_;
--    my $leading_space;
- 
-     $file = map_filename($orig_file);
- 
-@@ -1853,250 +2145,23 @@ sub process_file($) {
- 	}
- 	# Replace tabs by spaces
-         while ($_ =~ s/\t+/' ' x (length($&) * 8 - length($`) % 8)/e) {};
-+	# Hand this line to the appropriate state handler
- 	if ($state == STATE_NORMAL) {
--	    if (/$doc_start/o) {
--		$state = STATE_NAME;	# next line is always the function name
--		$in_doc_sect = 0;
--		$declaration_start_line = $. + 1;
--	    }
--	} elsif ($state == STATE_NAME) {# this line is the function name (always)
--	    if (/$doc_block/o) {
--		$state = STATE_DOCBLOCK;
--		$contents = "";
--                $new_start_line = $. + 1;
--
--		if ( $1 eq "" ) {
--			$section = $section_intro;
--		} else {
--			$section = $1;
--		}
--	    }
--	    elsif (/$doc_decl/o) {
--		$identifier = $1;
--		if (/\s*([\w\s]+?)\s*-/) {
--		    $identifier = $1;
--		}
--
--		$state = STATE_FIELD;
--		# if there's no @param blocks need to set up default section
--		# here
--		$contents = "";
--		$section = $section_default;
--		$new_start_line = $. + 1;
--		if (/-(.*)/) {
--		    # strip leading/trailing/multiple spaces
--		    $descr= $1;
--		    $descr =~ s/^\s*//;
--		    $descr =~ s/\s*$//;
--		    $descr =~ s/\s+/ /g;
--		    $declaration_purpose = xml_escape($descr);
--		    $in_purpose = 1;
--		} else {
--		    $declaration_purpose = "";
--		}
--
--		if (($declaration_purpose eq "") && $verbose) {
--			print STDERR "${file}:$.: warning: missing initial short description on line:\n";
--			print STDERR $_;
--			++$warnings;
--		}
--
--		if ($identifier =~ m/^struct/) {
--		    $decl_type = 'struct';
--		} elsif ($identifier =~ m/^union/) {
--		    $decl_type = 'union';
--		} elsif ($identifier =~ m/^enum/) {
--		    $decl_type = 'enum';
--		} elsif ($identifier =~ m/^typedef/) {
--		    $decl_type = 'typedef';
--		} else {
--		    $decl_type = 'function';
--		}
--
--		if ($verbose) {
--		    print STDERR "${file}:$.: info: Scanning doc for $identifier\n";
--		}
--	    } else {
--		print STDERR "${file}:$.: warning: Cannot understand $_ on line $.",
--		" - I thought it was a doc line\n";
--		++$warnings;
--		$state = STATE_NORMAL;
--	    }
--	} elsif ($state == STATE_FIELD) {	# look for head: lines, and include content
--	    if (/$doc_sect/i) { # case insensitive for supported section names
--		$newsection = $1;
--		$newcontents = $2;
--
--		# map the supported section names to the canonical names
--		if ($newsection =~ m/^description$/i) {
--		    $newsection = $section_default;
--		} elsif ($newsection =~ m/^context$/i) {
--		    $newsection = $section_context;
--		} elsif ($newsection =~ m/^returns?$/i) {
--		    $newsection = $section_return;
--		} elsif ($newsection =~ m/^\@return$/) {
--		    # special: @return is a section, not a param description
--		    $newsection = $section_return;
--		}
--
--		if (($contents ne "") && ($contents ne "\n")) {
--		    if (!$in_doc_sect && $verbose) {
--			print STDERR "${file}:$.: warning: contents before sections\n";
--			++$warnings;
--		    }
--		    dump_section($file, $section, xml_escape($contents));
--		    $section = $section_default;
--		}
--
--		$in_doc_sect = 1;
--		$in_purpose = 0;
--		$contents = $newcontents;
--                $new_start_line = $.;
--		while (substr($contents, 0, 1) eq " ") {
--		    $contents = substr($contents, 1);
--		}
--		if ($contents ne "") {
--		    $contents .= "\n";
--		}
--		$section = $newsection;
--		$leading_space = undef;
--	    } elsif (/$doc_end/) {
--		if (($contents ne "") && ($contents ne "\n")) {
--		    dump_section($file, $section, xml_escape($contents));
--		    $section = $section_default;
--		    $contents = "";
--		}
--		# look for doc_com + <text> + doc_end:
--		if ($_ =~ m'\s*\*\s*[a-zA-Z_0-9:\.]+\*/') {
--		    print STDERR "${file}:$.: warning: suspicious ending line: $_";
--		    ++$warnings;
--		}
--
--		$prototype = "";
--		$state = STATE_PROTO;
--		$brcount = 0;
--#		print STDERR "end of doc comment, looking for prototype\n";
--	    } elsif (/$doc_content/) {
--		# miguel-style comment kludge, look for blank lines after
--		# @parameter line to signify start of description
--		if ($1 eq "") {
--		    if ($section =~ m/^@/ || $section eq $section_context) {
--			dump_section($file, $section, xml_escape($contents));
--			$section = $section_default;
--			$contents = "";
--                        $new_start_line = $.;
--		    } else {
--			$contents .= "\n";
--		    }
--		    $in_purpose = 0;
--		} elsif ($in_purpose == 1) {
--		    # Continued declaration purpose
--		    chomp($declaration_purpose);
--		    $declaration_purpose .= " " . xml_escape($1);
--		    $declaration_purpose =~ s/\s+/ /g;
--		} else {
--		    my $cont = $1;
--		    if ($section =~ m/^@/ || $section eq $section_context) {
--			if (!defined $leading_space) {
--			    if ($cont =~ m/^(\s+)/) {
--				$leading_space = $1;
--			    } else {
--				$leading_space = "";
--			    }
--			}
--
--			$cont =~ s/^$leading_space//;
--		    }
--		    $contents .= $cont . "\n";
--		}
--	    } else {
--		# i dont know - bad line?  ignore.
--		print STDERR "${file}:$.: warning: bad line: $_";
--		++$warnings;
--	    }
-+	    process_normal();
-+	} elsif ($state == STATE_NAME) {
-+	    process_name($file, $_);
-+	} elsif ($state == STATE_BODY || $state == STATE_BODY_MAYBE) {
-+	    process_body($file, $_);
- 	} elsif ($state == STATE_INLINE) { # scanning for inline parameters
--	    # First line (state 1) needs to be a @parameter
--	    if ($inline_doc_state == STATE_INLINE_NAME && /$doc_inline_sect/o) {
--		$section = $1;
--		$contents = $2;
--                $new_start_line = $.;
--		if ($contents ne "") {
--		    while (substr($contents, 0, 1) eq " ") {
--			$contents = substr($contents, 1);
--		    }
--		    $contents .= "\n";
--		}
--		$inline_doc_state = STATE_INLINE_TEXT;
--	    # Documentation block end */
--	    } elsif (/$doc_inline_end/) {
--		if (($contents ne "") && ($contents ne "\n")) {
--		    dump_section($file, $section, xml_escape($contents));
--		    $section = $section_default;
--		    $contents = "";
--		}
--		$state = STATE_PROTO;
--		$inline_doc_state = STATE_INLINE_NA;
--	    # Regular text
--	    } elsif (/$doc_content/) {
--		if ($inline_doc_state == STATE_INLINE_TEXT) {
--		    $contents .= $1 . "\n";
--		    # nuke leading blank lines
--		    if ($contents =~ /^\s*$/) {
--			$contents = "";
--		    }
--		} elsif ($inline_doc_state == STATE_INLINE_NAME) {
--		    $inline_doc_state = STATE_INLINE_ERROR;
--		    print STDERR "${file}:$.: warning: ";
--		    print STDERR "Incorrect use of kernel-doc format: $_";
--		    ++$warnings;
--		}
--	    }
--	} elsif ($state == STATE_PROTO) {	# scanning for function '{' (end of prototype)
--	    if (/$doc_inline_oneline/) {
--		$section = $1;
--		$contents = $2;
--		if ($contents ne "") {
--		    $contents .= "\n";
--		    dump_section($file, $section, xml_escape($contents));
--		    $section = $section_default;
--		    $contents = "";
--		}
--	    } elsif (/$doc_inline_start/) {
--		$state = STATE_INLINE;
--		$inline_doc_state = STATE_INLINE_NAME;
--	    } elsif ($decl_type eq 'function') {
--		process_proto_function($_, $file);
--	    } else {
--		process_proto_type($_, $file);
--	    }
-+	    process_inline($file, $_);
-+	} elsif ($state == STATE_PROTO) {
-+	    process_proto($file, $_);
- 	} elsif ($state == STATE_DOCBLOCK) {
--		if (/$doc_end/)
--		{
--			dump_doc_section($file, $section, xml_escape($contents));
--			$section = $section_default;
--			$contents = "";
--			$function = "";
--			%parameterdescs = ();
--			%parametertypes = ();
--			@parameterlist = ();
--			%sections = ();
--			@sectionlist = ();
--			$prototype = "";
--			$state = STATE_NORMAL;
--		}
--		elsif (/$doc_content/)
--		{
--			if ( $1 eq "" )
--			{
--				$contents .= $blankline;
--			}
--			else
--			{
--				$contents .= $1 . "\n";
--			}
--		}
-+	    process_docblock($file, $_);
- 	}
-     }
-+
-+    # Make sure we got something interesting.
-     if ($initial_section_counter == $section_counter) {
- 	if ($output_mode ne "none") {
- 	    print STDERR "${file}:1: warning: no structured comments found\n";
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0009-multipath-tools-configure-hitachi-ams2000-and-hus100.patch

@@ -1,56 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Xose Vazquez Perez <xose.vazquez@gmail.com>
-Date: Mon, 14 May 2018 17:30:17 +0200
-Subject: [PATCH] multipath-tools: configure hitachi ams2000 and hus100 as full
- active arrays
-
-AMS2000 and HUS100 families are active/active arrays.
-
-Based on https://support.hitachivantara.com/download/epcra/df818913.pdf
-and internal hitachi docs.
-
-Cc: Matthias Rudolph <Matthias.Rudolph@hitachivantara.com>
-Cc: Christophe Varoqui <christophe.varoqui@opensvc.com>
-Cc: DM-DEV ML <dm-devel@redhat.com>
-Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- libmultipath/hwtable.c | 10 ++++++++--
- 1 file changed, 8 insertions(+), 2 deletions(-)
-
-diff --git a/libmultipath/hwtable.c b/libmultipath/hwtable.c
-index 2ca6888..148f0ba 100644
---- a/libmultipath/hwtable.c
-+++ b/libmultipath/hwtable.c
-@@ -398,13 +398,13 @@ static struct hwentry default_hw[] = {
- 	 * Mail : matthias.rudolph@hds.com
- 	 */
- 	{
--		/* USP-V, HUS VM, VSP, VSP G1X00 and VSP GX00 families */
-+		/* USP-V, HUS VM, VSP, VSP G1X00 and VSP GX00 families / HP XP */
- 		.vendor        = "(HITACHI|HP)",
- 		.product       = "^OPEN-",
- 		.pgpolicy      = MULTIBUS,
- 	},
- 	{
--		/* AMS 2000 and HUS 100 families */
-+		/* AMS other than AMS 2000 */
- 		.vendor        = "HITACHI",
- 		.product       = "^DF",
- 		.no_path_retry = NO_PATH_RETRY_QUEUE,
-@@ -412,6 +412,12 @@ static struct hwentry default_hw[] = {
- 		.pgfailback    = -FAILBACK_IMMEDIATE,
- 		.prio_name     = PRIO_HDS,
- 	},
-+	{
-+		/* AMS 2000 and HUS 100 families */
-+		.vendor        = "HITACHI",
-+		.product       = "^DF600F",
-+		.pgpolicy      = MULTIBUS,
-+	},
- 	/*
- 	 * IBM
- 	 *
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0010-libmultipath-don-t-reject-maps-with-undefined-prio.patch

@@ -1,42 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Martin Wilck <mwilck@suse.com>
-Date: Wed, 21 Mar 2018 10:34:18 +0100
-Subject: [PATCH] libmultipath: don't reject maps with undefined prio
-
-libmultipath's prio routines can deal with pp->priority == PRIO_UNDEF
-just fine. PRIO_UNDEF is just a very low priority. So there's
-no reason to reject setting up a multipath map because paths have
-undefined priority.
-
-Signed-off-by: Martin Wilck <mwilck@suse.com>
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- libmultipath/configure.c | 5 -----
- 1 file changed, 5 deletions(-)
-
-diff --git a/libmultipath/configure.c b/libmultipath/configure.c
-index 5796683..5c54f9b 100644
---- a/libmultipath/configure.c
-+++ b/libmultipath/configure.c
-@@ -1063,9 +1063,6 @@ int coalesce_paths (struct vectors * vecs, vector newmp, char * refwwid,
- 			continue;
- 		}
- 
--		if (pp1->priority == PRIO_UNDEF)
--			mpp->action = ACT_REJECT;
--
- 		if (!mpp->paths) {
- 			condlog(0, "%s: skip coalesce (no paths)", mpp->alias);
- 			remove_map(mpp, vecs, 0);
-@@ -1091,8 +1088,6 @@ int coalesce_paths (struct vectors * vecs, vector newmp, char * refwwid,
- 					mpp->size);
- 				mpp->action = ACT_REJECT;
- 			}
--			if (pp2->priority == PRIO_UNDEF)
--				mpp->action = ACT_REJECT;
- 		}
- 		verify_paths(mpp, vecs);
- 
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0011-multipathd-handle-errors-in-uxlsnr-as-fatal.patch

@@ -1,57 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Martin Wilck <mwilck@suse.com>
-Date: Wed, 21 Mar 2018 10:34:19 +0100
-Subject: [PATCH] multipathd: handle errors in uxlsnr as fatal
-
-The ppoll() calls of the uxlsnr thread are vital for proper functioning of
-multipathd. If the uxlsnr thread can't open the socket or fails to call ppoll()
-for other reasons, quit the daemon. If we don't do that, multipathd may
-hang in a state where it can't be terminated any more, because the uxlsnr
-thread is responsible for handling all signals. This happens e.g. if
-systemd's multipathd.socket is running in and multipathd is started from
-outside systemd.
-
-24f2844 "multipathd: fix signal blocking logic" has made this problem more
-severe. Before that patch, the signals weren't actually blocked in any thread.
-That's not to say 24f2844 was wrong. I still think it's correct, we just
-need this one on top.
-
-Signed-off-by: Martin Wilck <mwilck@suse.com>
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- multipathd/uxlsnr.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
-diff --git a/multipathd/uxlsnr.c b/multipathd/uxlsnr.c
-index cdafd82..6f66666 100644
---- a/multipathd/uxlsnr.c
-+++ b/multipathd/uxlsnr.c
-@@ -178,7 +178,7 @@ void * uxsock_listen(uxsock_trigger_fn uxsock_trigger, void * trigger_data)
- 
- 	if (ux_sock == -1) {
- 		condlog(1, "could not create uxsock: %d", errno);
--		return NULL;
-+		exit_daemon();
- 	}
- 
- 	pthread_cleanup_push(uxsock_cleanup, (void *)ux_sock);
-@@ -187,7 +187,7 @@ void * uxsock_listen(uxsock_trigger_fn uxsock_trigger, void * trigger_data)
- 	polls = (struct pollfd *)MALLOC((MIN_POLLS + 1) * sizeof(struct pollfd));
- 	if (!polls) {
- 		condlog(0, "uxsock: failed to allocate poll fds");
--		return NULL;
-+		exit_daemon();
- 	}
- 	sigfillset(&mask);
- 	sigdelset(&mask, SIGINT);
-@@ -249,6 +249,7 @@ void * uxsock_listen(uxsock_trigger_fn uxsock_trigger, void * trigger_data)
- 
- 			/* something went badly wrong! */
- 			condlog(0, "uxsock: poll failed with %d", errno);
-+			exit_daemon();
- 			break;
- 		}
- 
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0012-libmultipath-fix-error-parsing-find_multipaths-stric.patch

@@ -1,36 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Martin Wilck <mwilck@suse.com>
-Date: Tue, 15 May 2018 14:32:44 +0200
-Subject: [PATCH] libmultipath: fix error parsing "find_multipaths strict"
-
-If "find_multipaths strict" is set in multipath.conf, the error message
-"illegal value for find_multipaths: strict" is printed. This causes no
-functional problem, as "strict" happens to be the default, fallback
-value. It should be fixed nonetheless. FIND_MULTIPATHS_STRICT, having
-the highest numeric value, must be last in the enum.
-
-Fixes: c36f2f42 "libmultipath: change find_multipaths option to multi-value"
-Signed-off-by: Martin Wilck <mwilck@suse.com>
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- libmultipath/structs.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/libmultipath/structs.h b/libmultipath/structs.h
-index eb6a178..e424b15 100644
---- a/libmultipath/structs.h
-+++ b/libmultipath/structs.h
-@@ -122,9 +122,9 @@ enum find_multipaths_states {
- 	FIND_MULTIPATHS_UNDEF = YNU_UNDEF,
- 	FIND_MULTIPATHS_OFF = YNU_NO,
- 	FIND_MULTIPATHS_ON = _FIND_MULTIPATHS_F,
--	FIND_MULTIPATHS_STRICT = _FIND_MULTIPATHS_F|_FIND_MULTIPATHS_N,
- 	FIND_MULTIPATHS_GREEDY = _FIND_MULTIPATHS_I,
- 	FIND_MULTIPATHS_SMART = _FIND_MULTIPATHS_F|_FIND_MULTIPATHS_I,
-+	FIND_MULTIPATHS_STRICT = _FIND_MULTIPATHS_F|_FIND_MULTIPATHS_N,
- 	__FIND_MULTIPATHS_LAST,
- };
- 
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0013-libmultipath-print-correct-default-for-delay_-_check.patch

@@ -1,40 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Benjamin Marzinski <bmarzins@redhat.com>
-Date: Mon, 7 May 2018 17:16:05 -0500
-Subject: [PATCH] libmultipath: print correct default for delay_*_checks
-
-These options default to "no", so they should display that when the
-config is printed.
-
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- libmultipath/dict.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
-diff --git a/libmultipath/dict.c b/libmultipath/dict.c
-index 4040611..3e7c5d6 100644
---- a/libmultipath/dict.c
-+++ b/libmultipath/dict.c
-@@ -1115,7 +1115,8 @@ print_off_int_undef(char * buff, int len, long v)
- }
- 
- declare_def_handler(delay_watch_checks, set_off_int_undef)
--declare_def_snprint(delay_watch_checks, print_off_int_undef)
-+declare_def_snprint_defint(delay_watch_checks, print_off_int_undef,
-+			   DEFAULT_DELAY_CHECKS)
- declare_ovr_handler(delay_watch_checks, set_off_int_undef)
- declare_ovr_snprint(delay_watch_checks, print_off_int_undef)
- declare_hw_handler(delay_watch_checks, set_off_int_undef)
-@@ -1123,7 +1124,8 @@ declare_hw_snprint(delay_watch_checks, print_off_int_undef)
- declare_mp_handler(delay_watch_checks, set_off_int_undef)
- declare_mp_snprint(delay_watch_checks, print_off_int_undef)
- declare_def_handler(delay_wait_checks, set_off_int_undef)
--declare_def_snprint(delay_wait_checks, print_off_int_undef)
-+declare_def_snprint_defint(delay_wait_checks, print_off_int_undef,
-+			   DEFAULT_DELAY_CHECKS)
- declare_ovr_handler(delay_wait_checks, set_off_int_undef)
- declare_ovr_snprint(delay_wait_checks, print_off_int_undef)
- declare_hw_handler(delay_wait_checks, set_off_int_undef)
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0014-multipath.conf.5-clarify-property-whitelist-handling.patch

@@ -1,31 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Benjamin Marzinski <bmarzins@redhat.com>
-Date: Wed, 9 May 2018 14:32:59 -0500
-Subject: [PATCH] multipath.conf.5: clarify property whitelist handling
-
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- multipath/multipath.conf.5 | 7 +++----
- 1 file changed, 3 insertions(+), 4 deletions(-)
-
-diff --git a/multipath/multipath.conf.5 b/multipath/multipath.conf.5
-index f689795..96d1b66 100644
---- a/multipath/multipath.conf.5
-+++ b/multipath/multipath.conf.5
-@@ -1181,10 +1181,9 @@ and
- keywords. For a full description of these keywords please see the \fIdevices\fR
- section description.
- .LP
--The \fIproperty\fR blacklist and whitelist handling is different from the usual
--handling in the sense that the whitelist \fIhas\fR to be set, otherwise the
--device will be blacklisted. In these cases the message \fIblacklisted, udev
--property missing\fR will be displayed.
-+The \fIproperty\fR whitelist handling is different from the usual
-+handling in the sense that the device \fIhas\fR to have a udev property that
-+matches the whitelist, otherwise the device will be blacklisted. In these cases the message \fIblacklisted, udev property missing\fR will be displayed.
- .
- .
- .\" ----------------------------------------------------------------------------
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0015-mpathpersist-add-all_tg_pt-option.patch

@@ -1,317 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Benjamin Marzinski <bmarzins@redhat.com>
-Date: Thu, 31 May 2018 17:47:11 -0500
-Subject: [PATCH] mpathpersist: add all_tg_pt option
-
-Some arrays, such as the EMC VNX, don't follow the scsi persistent
-reservations spec in making key registrations per I_T NEXUS. Instead,
-the registration is shared by all target ports connected to a given
-host.  This causes mpathpersist to fail whenever it tries to register a
-key, since it will receive a registration conflict on some of the paths.
-
-To deal with this, mpathpersist needs to track the hosts that it has
-done a registration on, and only register once per host. The new
-"all_tg_pt" multipath.conf option is used to set which arrays need this
-feature.  I currently don't know if all EMC VNX arrays handle persistent
-reservations like this, or if it is configurable. A future patch will
-update the VNX built-in config, if this is indeed their default (or
-only) setting.
-
-Multipathd doesn't need to worry about this. It is often the case that
-when a path device comes back, it will still have the keys registered to
-it. Because of this, multipathd uses register-and-ignore, which means
-that it won't cause an error if the registration has already happened
-down a different target port.
-
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- libmpathpersist/mpath_persist.c | 28 ++++++++++++++++++++++------
- libmultipath/config.c           |  2 ++
- libmultipath/config.h           |  2 ++
- libmultipath/defaults.h         |  1 +
- libmultipath/dict.c             | 10 ++++++++++
- libmultipath/propsel.c          | 15 +++++++++++++++
- libmultipath/propsel.h          |  1 +
- libmultipath/structs.h          |  7 +++++++
- multipath/multipath.conf.5      | 11 +++++++++++
- 9 files changed, 71 insertions(+), 6 deletions(-)
-
-diff --git a/libmpathpersist/mpath_persist.c b/libmpathpersist/mpath_persist.c
-index 907a17c..ca91c55 100644
---- a/libmpathpersist/mpath_persist.c
-+++ b/libmpathpersist/mpath_persist.c
-@@ -335,6 +335,7 @@ int mpath_persistent_reserve_out ( int fd, int rq_servact, int rq_scope,
- 
- 	conf = get_multipath_config();
- 	select_reservation_key(conf, mpp);
-+	select_all_tg_pt(conf, mpp);
- 	put_multipath_config(conf);
- 
- 	memcpy(&prkey, paramp->sa_key, 8);
-@@ -456,7 +457,7 @@ int mpath_prout_reg(struct multipath *mpp,int rq_servact, int rq_scope,
- 	unsigned int rq_type, struct prout_param_descriptor * paramp, int noisy)
- {
- 
--	int i, j;
-+	int i, j, k;
- 	struct pathgroup *pgp = NULL;
- 	struct path *pp = NULL;
- 	int rollback = 0;
-@@ -481,11 +482,13 @@ int mpath_prout_reg(struct multipath *mpp,int rq_servact, int rq_scope,
- 	}
- 
- 	struct threadinfo thread[active_pathcount];
-+	int hosts[active_pathcount];
- 
- 	memset(thread, 0, sizeof(thread));
- 
- 	/* init thread parameter */
- 	for (i =0; i< active_pathcount; i++){
-+		hosts[i] = -1;
- 		thread[i].param.rq_servact = rq_servact;
- 		thread[i].param.rq_scope = rq_scope;
- 		thread[i].param.rq_type = rq_type;
-@@ -514,6 +517,17 @@ int mpath_prout_reg(struct multipath *mpp,int rq_servact, int rq_scope,
- 				condlog (1, "%s: %s path not up. Skip.", mpp->wwid, pp->dev);
- 				continue;
- 			}
-+			if (mpp->all_tg_pt == ALL_TG_PT_ON &&
-+			    pp->sg_id.host_no != -1) {
-+				for (k = 0; k < count; k++) {
-+					if (pp->sg_id.host_no == hosts[k]) {
-+						condlog(3, "%s: %s host %d matches skip.", pp->wwid, pp->dev, pp->sg_id.host_no);
-+						break;
-+					}
-+				}
-+				if (k < count)
-+					continue;
-+			}
- 			strncpy(thread[count].param.dev, pp->dev,
- 				FILE_NAME_SIZE - 1);
- 
-@@ -531,10 +545,12 @@ int mpath_prout_reg(struct multipath *mpp,int rq_servact, int rq_scope,
- 				condlog (0, "%s: failed to create thread %d", mpp->wwid, rc);
- 				thread[count].param.status = MPATH_PR_THREAD_ERROR;
- 			}
-+			else
-+				hosts[count] = pp->sg_id.host_no;
- 			count = count + 1;
- 		}
- 	}
--	for( i=0; i < active_pathcount ; i++){
-+	for( i=0; i < count ; i++){
- 		if (thread[i].param.status != MPATH_PR_THREAD_ERROR) {
- 			rc = pthread_join(thread[i].id, NULL);
- 			if (rc){
-@@ -557,7 +573,7 @@ int mpath_prout_reg(struct multipath *mpp,int rq_servact, int rq_scope,
- 	}
- 	if (rollback && ((rq_servact == MPATH_PROUT_REG_SA) && sa_key != 0 )){
- 		condlog (3, "%s: ERROR: initiating pr out rollback", mpp->wwid);
--		for( i=0 ; i < active_pathcount ; i++){
-+		for( i=0 ; i < count ; i++){
- 			if(thread[i].param.status == MPATH_PR_SUCCESS) {
- 				memcpy(&thread[i].param.paramp->key, &thread[i].param.paramp->sa_key, 8);
- 				memset(&thread[i].param.paramp->sa_key, 0, 8);
-@@ -571,7 +587,7 @@ int mpath_prout_reg(struct multipath *mpp,int rq_servact, int rq_scope,
- 			} else
- 				thread[i].param.status = MPATH_PR_SKIP;
- 		}
--		for(i=0; i < active_pathcount ; i++){
-+		for(i=0; i < count ; i++){
- 			if (thread[i].param.status != MPATH_PR_SKIP &&
- 			    thread[i].param.status != MPATH_PR_THREAD_ERROR) {
- 				rc = pthread_join(thread[i].id, NULL);
-@@ -720,7 +736,7 @@ int mpath_prout_rel(struct multipath *mpp,int rq_servact, int rq_scope,
- 		}
- 	}
- 	pthread_attr_destroy (&attr);
--	for (i = 0; i < active_pathcount; i++){
-+	for (i = 0; i < count; i++){
- 		if (thread[i].param.status != MPATH_PR_THREAD_ERROR) {
- 			rc = pthread_join (thread[i].id, NULL);
- 			if (rc){
-@@ -729,7 +745,7 @@ int mpath_prout_rel(struct multipath *mpp,int rq_servact, int rq_scope,
- 		}
- 	}
- 
--	for (i = 0; i < active_pathcount; i++){
-+	for (i = 0; i < count; i++){
- 		/*  check thread status here and return the status */
- 
- 		if (thread[i].param.status == MPATH_PR_RESERV_CONFLICT)
-diff --git a/libmultipath/config.c b/libmultipath/config.c
-index 085a3e1..5872927 100644
---- a/libmultipath/config.c
-+++ b/libmultipath/config.c
-@@ -352,6 +352,7 @@ merge_hwe (struct hwentry * dst, struct hwentry * src)
- 	merge_num(skip_kpartx);
- 	merge_num(max_sectors_kb);
- 	merge_num(ghost_delay);
-+	merge_num(all_tg_pt);
- 
- 	snprintf(id, sizeof(id), "%s/%s", dst->vendor, dst->product);
- 	reconcile_features_with_options(id, &dst->features,
-@@ -622,6 +623,7 @@ load_config (char * file)
- 	conf->disable_changed_wwids = DEFAULT_DISABLE_CHANGED_WWIDS;
- 	conf->remove_retries = 0;
- 	conf->ghost_delay = DEFAULT_GHOST_DELAY;
-+	conf->all_tg_pt = DEFAULT_ALL_TG_PT;
- 
- 	/*
- 	 * preload default hwtable
-diff --git a/libmultipath/config.h b/libmultipath/config.h
-index 6e69a37..1bf708a 100644
---- a/libmultipath/config.h
-+++ b/libmultipath/config.h
-@@ -82,6 +82,7 @@ struct hwentry {
- 	int skip_kpartx;
- 	int max_sectors_kb;
- 	int ghost_delay;
-+	int all_tg_pt;
- 	char * bl_product;
- };
- 
-@@ -194,6 +195,7 @@ struct config {
- 	char * partition_delim;
- 	char * config_dir;
- 	int prkey_source;
-+	int all_tg_pt;
- 	struct be64 reservation_key;
- 
- 	vector keywords;
-diff --git a/libmultipath/defaults.h b/libmultipath/defaults.h
-index d7b87b4..f076b4b 100644
---- a/libmultipath/defaults.h
-+++ b/libmultipath/defaults.h
-@@ -43,6 +43,7 @@
- #define DEFAULT_GHOST_DELAY GHOST_DELAY_OFF
- #define DEFAULT_FIND_MULTIPATHS_TIMEOUT -10
- #define DEFAULT_UNKNOWN_FIND_MULTIPATHS_TIMEOUT 1
-+#define DEFAULT_ALL_TG_PT ALL_TG_PT_OFF
- 
- #define DEFAULT_CHECKINT	5
- #define MAX_CHECKINT(a)		(a << 2)
-diff --git a/libmultipath/dict.c b/libmultipath/dict.c
-index 3e7c5d6..2557b8a 100644
---- a/libmultipath/dict.c
-+++ b/libmultipath/dict.c
-@@ -1178,6 +1178,13 @@ declare_hw_snprint(ghost_delay, print_off_int_undef)
- declare_mp_handler(ghost_delay, set_off_int_undef)
- declare_mp_snprint(ghost_delay, print_off_int_undef)
- 
-+declare_def_handler(all_tg_pt, set_yes_no_undef)
-+declare_def_snprint_defint(all_tg_pt, print_yes_no_undef, DEFAULT_ALL_TG_PT)
-+declare_ovr_handler(all_tg_pt, set_yes_no_undef)
-+declare_ovr_snprint(all_tg_pt, print_yes_no_undef)
-+declare_hw_handler(all_tg_pt, set_yes_no_undef)
-+declare_hw_snprint(all_tg_pt, print_yes_no_undef)
-+
- 
- static int
- def_uxsock_timeout_handler(struct config *conf, vector strvec)
-@@ -1509,6 +1516,7 @@ init_keywords(vector keywords)
- 	install_keyword("prkeys_file", &def_prkeys_file_handler, &snprint_def_prkeys_file);
- 	install_keyword("log_checker_err", &def_log_checker_err_handler, &snprint_def_log_checker_err);
- 	install_keyword("reservation_key", &def_reservation_key_handler, &snprint_def_reservation_key);
-+	install_keyword("all_tg_pt", &def_all_tg_pt_handler, &snprint_def_all_tg_pt);
- 	install_keyword("retain_attached_hw_handler", &def_retain_hwhandler_handler, &snprint_def_retain_hwhandler);
- 	install_keyword("detect_prio", &def_detect_prio_handler, &snprint_def_detect_prio);
- 	install_keyword("detect_checker", &def_detect_checker_handler, &snprint_def_detect_checker);
-@@ -1618,6 +1626,7 @@ init_keywords(vector keywords)
- 	install_keyword("skip_kpartx", &hw_skip_kpartx_handler, &snprint_hw_skip_kpartx);
- 	install_keyword("max_sectors_kb", &hw_max_sectors_kb_handler, &snprint_hw_max_sectors_kb);
- 	install_keyword("ghost_delay", &hw_ghost_delay_handler, &snprint_hw_ghost_delay);
-+	install_keyword("all_tg_pt", &hw_all_tg_pt_handler, &snprint_hw_all_tg_pt);
- 	install_sublevel_end();
- 
- 	install_keyword_root("overrides", &overrides_handler);
-@@ -1654,6 +1663,7 @@ init_keywords(vector keywords)
- 	install_keyword("skip_kpartx", &ovr_skip_kpartx_handler, &snprint_ovr_skip_kpartx);
- 	install_keyword("max_sectors_kb", &ovr_max_sectors_kb_handler, &snprint_ovr_max_sectors_kb);
- 	install_keyword("ghost_delay", &ovr_ghost_delay_handler, &snprint_ovr_ghost_delay);
-+	install_keyword("all_tg_pt", &ovr_all_tg_pt_handler, &snprint_ovr_all_tg_pt);
- 
- 	install_keyword_root("multipaths", &multipaths_handler);
- 	install_keyword_multi("multipath", &multipath_handler, NULL);
-diff --git a/libmultipath/propsel.c b/libmultipath/propsel.c
-index 627d366..9ca1355 100644
---- a/libmultipath/propsel.c
-+++ b/libmultipath/propsel.c
-@@ -978,3 +978,18 @@ out:
- 		pp->dev, pp->find_multipaths_timeout, origin);
- 	return 0;
- }
-+
-+int select_all_tg_pt (struct config *conf, struct multipath * mp)
-+{
-+	const char *origin;
-+
-+	mp_set_ovr(all_tg_pt);
-+	mp_set_hwe(all_tg_pt);
-+	mp_set_conf(all_tg_pt);
-+	mp_set_default(all_tg_pt, DEFAULT_ALL_TG_PT);
-+out:
-+	condlog(3, "%s: all_tg_pt = %s %s", mp->alias,
-+		(mp->all_tg_pt == ALL_TG_PT_ON)? "yes" : "no",
-+		origin);
-+	return 0;
-+}
-diff --git a/libmultipath/propsel.h b/libmultipath/propsel.h
-index a022bee..ae99b92 100644
---- a/libmultipath/propsel.h
-+++ b/libmultipath/propsel.h
-@@ -34,3 +34,4 @@ int select_ghost_delay(struct config *conf, struct multipath * mp);
- void reconcile_features_with_options(const char *id, char **features,
- 				     int* no_path_retry,
- 				     int *retain_hwhandler);
-+int select_all_tg_pt (struct config *conf, struct multipath * mp);
-diff --git a/libmultipath/structs.h b/libmultipath/structs.h
-index e424b15..0194b1e 100644
---- a/libmultipath/structs.h
-+++ b/libmultipath/structs.h
-@@ -217,6 +217,12 @@ enum prkey_sources {
- 	PRKEY_SOURCE_FILE,
- };
- 
-+enum all_tg_pt_states {
-+	ALL_TG_PT_UNDEF = YNU_UNDEF,
-+	ALL_TG_PT_OFF = YNU_NO,
-+	ALL_TG_PT_ON = YNU_YES,
-+};
-+
- struct sg_id {
- 	int host_no;
- 	int channel;
-@@ -362,6 +368,7 @@ struct multipath {
- 	int prkey_source;
- 	struct be64 reservation_key;
- 	unsigned char prflag;
-+	int all_tg_pt;
- 	struct gen_multipath generic_mp;
- };
- 
-diff --git a/multipath/multipath.conf.5 b/multipath/multipath.conf.5
-index 96d1b66..0c1f174 100644
---- a/multipath/multipath.conf.5
-+++ b/multipath/multipath.conf.5
-@@ -743,6 +743,17 @@ The default is: \fB<unset>\fR
- .
- .
- .TP
-+.B all_tg_pt
-+This must be set to \fByes\fR to successfully use mpathpersist on arrays that
-+automatically set and clear registration keys on all target ports from a
-+host, instead of per target port per host.
-+.RS
-+.TP
-+The default is: \fBno\fR
-+.RE
-+.
-+.
-+.TP
- .B retain_attached_hw_handler
- (Obsolete for kernels >= 4.3) If set to
- .I yes
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0017-mpathpersist-fix-aptpl-support.patch

@@ -1,543 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Benjamin Marzinski <bmarzins@redhat.com>
-Date: Mon, 4 Jun 2018 22:04:44 -0500
-Subject: [PATCH] mpathpersist: fix aptpl support
-
-The "Active Persist Through Power Loss" flag must be set whenever a key
-is registered. However, there is no way for multipathd to know if this
-was set by mpathpersist. The result is that if a path goes down and
-comes back up (or if it wasn't up when mpathpersist was first run)
-multipathd will clear the aptpl flag when it reregisters the key on it.
-
-To fix this, multipath.conf now accepts an optional ":aptpl" appended
-on the reservation_key value. If this is added to the reservation_key
-multipathd will set the aptpl flag when it reregisters the key. If
-reservation_key is set to "file", this will automatically be tracked
-in the /etc/multipath/prkeys file.
-
-To track this flag in the prkeys file, without changing the format
-I've made "0x<key>" stand for non-aptpl keys, and "0X<key>" stand
-for aptpl keys. Since previously, all keys used a lower-case x, this
-will default to the current behavior for existing keys. Obviously, the
-next time mpathpersist is run, this will be changed if --param-aptpl
-is used.  Since there are no more flags that are in sg_persist that
-multipathd needs to care about in mpathpersist, there shouldn't need
-to be any more flags added to the prkeys file.
-
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- libmpathpersist/mpath_persist.c  |  3 ++-
- libmpathpersist/mpath_updatepr.c | 11 +++++++----
- libmpathpersist/mpathpr.h        |  3 ++-
- libmultipath/Makefile            |  2 +-
- libmultipath/config.h            |  2 ++
- libmultipath/dict.c              | 23 +++++++++++++++++++----
- libmultipath/dict.h              |  3 ++-
- libmultipath/prkey.c             | 27 ++++++++++++++++++++++++---
- libmultipath/prkey.h             |  6 ++++--
- libmultipath/propsel.c           |  6 ++++--
- libmultipath/structs.h           |  1 +
- libmultipath/util.c              | 16 ++++++++++++++++
- libmultipath/util.h              |  1 +
- multipath/multipath.conf.5       |  7 +++++--
- multipathd/cli_handlers.c        | 15 ++++++++++-----
- multipathd/main.c                |  1 +
- 16 files changed, 101 insertions(+), 26 deletions(-)
-
-diff --git a/libmpathpersist/mpath_persist.c b/libmpathpersist/mpath_persist.c
-index ca91c55..6e9e67f 100644
---- a/libmpathpersist/mpath_persist.c
-+++ b/libmpathpersist/mpath_persist.c
-@@ -344,7 +344,8 @@ int mpath_persistent_reserve_out ( int fd, int rq_servact, int rq_scope,
- 	      rq_servact == MPATH_PROUT_REG_SA) ||
- 	     rq_servact == MPATH_PROUT_REG_IGN_SA)) {
- 		memcpy(&mpp->reservation_key, paramp->sa_key, 8);
--		if (update_prkey(alias, get_be64(mpp->reservation_key))) {
-+		if (update_prkey_flags(alias, get_be64(mpp->reservation_key),
-+				       paramp->sa_flags)) {
- 			condlog(0, "%s: failed to set prkey for multipathd.",
- 				alias);
- 			ret = MPATH_PR_DMMP_ERROR;
-diff --git a/libmpathpersist/mpath_updatepr.c b/libmpathpersist/mpath_updatepr.c
-index 8063e90..0aca28e 100644
---- a/libmpathpersist/mpath_updatepr.c
-+++ b/libmpathpersist/mpath_updatepr.c
-@@ -1,7 +1,5 @@
- #include <stdio.h>
- #include <unistd.h>
--#include <errno.h>
--
- #include <stdlib.h>
- #include <stdarg.h>
- #include <fcntl.h>
-@@ -11,6 +9,8 @@
- #include <sys/un.h>
- #include <poll.h>
- #include <errno.h>
-+#include <libudev.h>
-+#include <mpath_persist.h>
- #include "debug.h"
- #include "mpath_cmd.h"
- #include "uxsock.h"
-@@ -59,11 +59,14 @@ int update_prflag(char *mapname, int set) {
- 	return do_update_pr(mapname, (set)? "setprstatus" : "unsetprstatus");
- }
- 
--int update_prkey(char *mapname, uint64_t prkey) {
-+int update_prkey_flags(char *mapname, uint64_t prkey, uint8_t sa_flags) {
- 	char str[256];
-+	char *flagstr = "";
- 
-+	if (sa_flags & MPATH_F_APTPL_MASK)
-+		flagstr = ":aptpl";
- 	if (prkey)
--		sprintf(str, "setprkey key %" PRIx64, prkey);
-+		sprintf(str, "setprkey key %" PRIx64 "%s", prkey, flagstr);
- 	else
- 		sprintf(str, "unsetprkey");
- 	return do_update_pr(mapname, str);
-diff --git a/libmpathpersist/mpathpr.h b/libmpathpersist/mpathpr.h
-index 72feb60..5ea8cd6 100644
---- a/libmpathpersist/mpathpr.h
-+++ b/libmpathpersist/mpathpr.h
-@@ -46,7 +46,8 @@ int send_prout_activepath(char * dev, int rq_servact, int rq_scope,
- 	unsigned int rq_type,   struct prout_param_descriptor * paramp, int noisy);
- 
- int update_prflag(char *mapname, int set);
--int update_prkey(char *mapname, uint64_t prkey);
-+int update_prkey_flags(char *mapname, uint64_t prkey, uint8_t sa_flags);
-+#define update_prkey(mapname, prkey) update_prkey_flags(mapname, prkey, 0)
- void * mpath_alloc_prin_response(int prin_sa);
- int update_map_pr(struct multipath *mpp);
- 
-diff --git a/libmultipath/Makefile b/libmultipath/Makefile
-index f51786d..33f5269 100644
---- a/libmultipath/Makefile
-+++ b/libmultipath/Makefile
-@@ -7,7 +7,7 @@ SONAME = 0
- DEVLIB = libmultipath.so
- LIBS = $(DEVLIB).$(SONAME)
- 
--CFLAGS += $(LIB_CFLAGS) -I$(mpathcmddir)
-+CFLAGS += $(LIB_CFLAGS) -I$(mpathcmddir) -I$(mpathpersistdir)
- 
- LIBDEPS += -lpthread -ldl -ldevmapper -ludev -L$(mpathcmddir) -lmpathcmd -lurcu -laio
- 
-diff --git a/libmultipath/config.h b/libmultipath/config.h
-index 1bf708a..fcbe3fc 100644
---- a/libmultipath/config.h
-+++ b/libmultipath/config.h
-@@ -98,6 +98,7 @@ struct mpentry {
- 	char * prio_args;
- 	int prkey_source;
- 	struct be64 reservation_key;
-+	uint8_t sa_flags;
- 	int pgpolicy;
- 	int pgfailback;
- 	int rr_weight;
-@@ -197,6 +198,7 @@ struct config {
- 	int prkey_source;
- 	int all_tg_pt;
- 	struct be64 reservation_key;
-+	uint8_t sa_flags;
- 
- 	vector keywords;
- 	vector mptable;
-diff --git a/libmultipath/dict.c b/libmultipath/dict.c
-index 2557b8a..7ad0f5a 100644
---- a/libmultipath/dict.c
-+++ b/libmultipath/dict.c
-@@ -22,6 +22,8 @@
- #include "util.h"
- #include <errno.h>
- #include <inttypes.h>
-+#include <libudev.h>
-+#include <mpath_persist.h>
- #include "mpath_cmd.h"
- #include "dict.h"
- 
-@@ -1012,10 +1014,12 @@ snprint_def_log_checker_err (struct config *conf, char * buff, int len,
- }
- 
- static int
--set_reservation_key(vector strvec, struct be64 *be64_ptr, int *source_ptr)
-+set_reservation_key(vector strvec, struct be64 *be64_ptr, uint8_t *flags_ptr,
-+		    int *source_ptr)
- {
- 	char *buff;
- 	uint64_t prkey;
-+	uint8_t sa_flags;
- 
- 	buff = set_value(strvec);
- 	if (!buff)
-@@ -1023,35 +1027,43 @@ set_reservation_key(vector strvec, struct be64 *be64_ptr, int *source_ptr)
- 
- 	if (strcmp(buff, "file") == 0) {
- 		*source_ptr = PRKEY_SOURCE_FILE;
-+		*flags_ptr = 0;
- 		put_be64(*be64_ptr, 0);
- 		FREE(buff);
- 		return 0;
- 	}
- 
--	if (parse_prkey(buff, &prkey) != 0) {
-+	if (parse_prkey_flags(buff, &prkey, &sa_flags) != 0) {
- 		FREE(buff);
- 		return 1;
- 	}
- 	*source_ptr = PRKEY_SOURCE_CONF;
-+	*flags_ptr = sa_flags;
- 	put_be64(*be64_ptr, prkey);
- 	FREE(buff);
- 	return 0;
- }
- 
- int
--print_reservation_key(char * buff, int len, struct be64 key, int source)
-+print_reservation_key(char * buff, int len, struct be64 key, uint8_t flags,
-+		      int source)
- {
-+	char *flagstr = "";
- 	if (source == PRKEY_SOURCE_NONE)
- 		return 0;
- 	if (source == PRKEY_SOURCE_FILE)
- 		return snprintf(buff, len, "file");
--	return snprintf(buff, len, "0x%" PRIx64, get_be64(key));
-+	if (flags & MPATH_F_APTPL_MASK)
-+		flagstr = ":aptpl";
-+	return snprintf(buff, len, "0x%" PRIx64 "%s", get_be64(key),
-+			flagstr);
- }
- 
- static int
- def_reservation_key_handler(struct config *conf, vector strvec)
- {
- 	return set_reservation_key(strvec, &conf->reservation_key,
-+				   &conf->sa_flags,
- 				   &conf->prkey_source);
- }
- 
-@@ -1060,6 +1072,7 @@ snprint_def_reservation_key (struct config *conf, char * buff, int len,
- 			     const void * data)
- {
- 	return print_reservation_key(buff, len, conf->reservation_key,
-+				     conf->sa_flags,
- 				     conf->prkey_source);
- }
- 
-@@ -1070,6 +1083,7 @@ mp_reservation_key_handler(struct config *conf, vector strvec)
- 	if (!mpe)
- 		return 1;
- 	return set_reservation_key(strvec, &mpe->reservation_key,
-+				   &mpe->sa_flags,
- 				   &mpe->prkey_source);
- }
- 
-@@ -1079,6 +1093,7 @@ snprint_mp_reservation_key (struct config *conf, char * buff, int len,
- {
- 	const struct mpentry * mpe = (const struct mpentry *)data;
- 	return print_reservation_key(buff, len, mpe->reservation_key,
-+				     mpe->sa_flags,
- 				     mpe->prkey_source);
- }
- 
-diff --git a/libmultipath/dict.h b/libmultipath/dict.h
-index 7564892..a40ac66 100644
---- a/libmultipath/dict.h
-+++ b/libmultipath/dict.h
-@@ -15,6 +15,7 @@ int print_pgpolicy(char *buff, int len, long v);
- int print_no_path_retry(char *buff, int len, long v);
- int print_fast_io_fail(char *buff, int len, long v);
- int print_dev_loss(char *buff, int len, unsigned long v);
--int print_reservation_key(char * buff, int len, struct be64 key, int source);
-+int print_reservation_key(char * buff, int len, struct be64 key, uint8_t
-+			  flags, int source);
- int print_off_int_undef(char *buff, int len, long v);
- #endif /* _DICT_H */
-diff --git a/libmultipath/prkey.c b/libmultipath/prkey.c
-index 89b90ed..d645f81 100644
---- a/libmultipath/prkey.c
-+++ b/libmultipath/prkey.c
-@@ -11,6 +11,8 @@
- #include <string.h>
- #include <inttypes.h>
- #include <errno.h>
-+#include <libudev.h>
-+#include <mpath_persist.h>
- 
- #define PRKEY_READ 0
- #define PRKEY_WRITE 1
-@@ -108,7 +110,8 @@ static int do_prkey(int fd, char *wwid, char *keystr, int cmd)
- 	return 0;
- }
- 
--int get_prkey(struct config *conf, struct multipath *mpp, uint64_t *prkey)
-+int get_prkey(struct config *conf, struct multipath *mpp, uint64_t *prkey,
-+	      uint8_t *sa_flags)
- {
- 	int fd;
- 	int unused;
-@@ -124,6 +127,9 @@ int get_prkey(struct config *conf, struct multipath *mpp, uint64_t *prkey)
- 	ret = do_prkey(fd, mpp->wwid, keystr, PRKEY_READ);
- 	if (ret)
- 		goto out_file;
-+	*sa_flags = 0;
-+	if (strchr(keystr, 'X'))
-+		*sa_flags = MPATH_F_APTPL_MASK;
- 	ret = !!parse_prkey(keystr, prkey);
- out_file:
- 	close(fd);
-@@ -131,7 +137,8 @@ out:
- 	return ret;
- }
- 
--int set_prkey(struct config *conf, struct multipath *mpp, uint64_t prkey)
-+int set_prkey(struct config *conf, struct multipath *mpp, uint64_t prkey,
-+	      uint8_t sa_flags)
- {
- 	int fd;
- 	int can_write = 1;
-@@ -141,6 +148,12 @@ int set_prkey(struct config *conf, struct multipath *mpp, uint64_t prkey)
- 	if (!strlen(mpp->wwid))
- 		goto out;
- 
-+	if (sa_flags & ~MPATH_F_APTPL_MASK) {
-+		condlog(0, "unsupported pr flags, 0x%x",
-+			sa_flags & ~MPATH_F_APTPL_MASK);
-+		sa_flags &= MPATH_F_APTPL_MASK;
-+	}
-+
- 	fd = open_file(conf->prkeys_file, &can_write, PRKEYS_FILE_HEADER);
- 	if (fd < 0)
- 		goto out;
-@@ -149,7 +162,15 @@ int set_prkey(struct config *conf, struct multipath *mpp, uint64_t prkey)
- 		goto out_file;
- 	}
- 	if (prkey) {
--		snprintf(keystr, PRKEY_SIZE, "0x%016" PRIx64, prkey);
-+		/* using the capitalization of the 'x' is a hack, but
-+		 * it's unlikely that mpath_persist will support more options
-+		 * since sg_persist doesn't, and this lets us keep the
-+		 * same file format as before instead of needing to change
-+		 * the format of the prkeys file */
-+		if (sa_flags)
-+			snprintf(keystr, PRKEY_SIZE, "0X%016" PRIx64, prkey);
-+		else
-+			snprintf(keystr, PRKEY_SIZE, "0x%016" PRIx64, prkey);
- 		keystr[PRKEY_SIZE - 1] = '\0';
- 		ret = do_prkey(fd, mpp->wwid, keystr, PRKEY_WRITE);
- 	}
-diff --git a/libmultipath/prkey.h b/libmultipath/prkey.h
-index 4028e70..6739191 100644
---- a/libmultipath/prkey.h
-+++ b/libmultipath/prkey.h
-@@ -13,7 +13,9 @@
- "# prkey wwid\n" \
- "#\n"
- 
--int set_prkey(struct config *conf, struct multipath *mpp, uint64_t prkey);
--int get_prkey(struct config *conf, struct multipath *mpp, uint64_t *prkey);
-+int set_prkey(struct config *conf, struct multipath *mpp, uint64_t prkey,
-+	      uint8_t sa_flags);
-+int get_prkey(struct config *conf, struct multipath *mpp, uint64_t *prkey,
-+	      uint8_t *sa_flags);
- 
- #endif /* _PRKEY_H */
-diff --git a/libmultipath/propsel.c b/libmultipath/propsel.c
-index 9ca1355..62a6893 100644
---- a/libmultipath/propsel.c
-+++ b/libmultipath/propsel.c
-@@ -106,6 +106,7 @@ do {									\
- 	if (src && src->prkey_source != PRKEY_SOURCE_NONE) {		\
- 		mp->prkey_source = src->prkey_source;			\
- 		mp->reservation_key = src->reservation_key;		\
-+		mp->sa_flags = src->sa_flags;				\
- 		origin = msg;						\
- 		goto out;						\
- 	}								\
-@@ -703,18 +704,19 @@ int select_reservation_key(struct config *conf, struct multipath *mp)
- 	do_prkey_set(mp->mpe, multipaths_origin);
- 	do_prkey_set(conf, conf_origin);
- 	put_be64(mp->reservation_key, 0);
-+	mp->sa_flags = 0;
- 	mp->prkey_source = PRKEY_SOURCE_NONE;
- 	return 0;
- out:
- 	if (mp->prkey_source == PRKEY_SOURCE_FILE) {
- 		from_file = " (from prkeys file)";
--		if (get_prkey(conf, mp, &prkey) != 0)
-+		if (get_prkey(conf, mp, &prkey, &mp->sa_flags) != 0)
- 			put_be64(mp->reservation_key, 0);
- 		else
- 			put_be64(mp->reservation_key, prkey);
- 	}
- 	print_reservation_key(buff, PRKEY_SIZE, mp->reservation_key,
--			      mp->prkey_source);
-+			      mp->sa_flags, mp->prkey_source);
- 	condlog(3, "%s: reservation_key = %s %s%s", mp->alias, buff, origin,
- 		from_file);
- 	return 0;
-diff --git a/libmultipath/structs.h b/libmultipath/structs.h
-index 0194b1e..987479f 100644
---- a/libmultipath/structs.h
-+++ b/libmultipath/structs.h
-@@ -367,6 +367,7 @@ struct multipath {
- 	/* persistent management data*/
- 	int prkey_source;
- 	struct be64 reservation_key;
-+	uint8_t sa_flags;
- 	unsigned char prflag;
- 	int all_tg_pt;
- 	struct gen_multipath generic_mp;
-diff --git a/libmultipath/util.c b/libmultipath/util.c
-index 7251ad0..8d8fcc8 100644
---- a/libmultipath/util.c
-+++ b/libmultipath/util.c
-@@ -10,6 +10,8 @@
- #include <dirent.h>
- #include <unistd.h>
- #include <errno.h>
-+#include <libudev.h>
-+#include <mpath_persist.h>
- 
- #include "util.h"
- #include "debug.h"
-@@ -435,6 +437,20 @@ int parse_prkey(char *ptr, uint64_t *prkey)
- 	return 0;
- }
- 
-+int parse_prkey_flags(char *ptr, uint64_t *prkey, uint8_t *flags)
-+{
-+	char *flagstr;
-+
-+	flagstr = strchr(ptr, ':');
-+	*flags = 0;
-+	if (flagstr) {
-+		*flagstr++ = '\0';
-+		if (strlen(flagstr) == 5 && strcmp(flagstr, "aptpl") == 0)
-+			*flags = MPATH_F_APTPL_MASK;
-+	}
-+	return parse_prkey(ptr, prkey);
-+}
-+
- int safe_write(int fd, const void *buf, size_t count)
- {
- 	while (count > 0) {
-diff --git a/libmultipath/util.h b/libmultipath/util.h
-index a3ab894..56cec76 100644
---- a/libmultipath/util.h
-+++ b/libmultipath/util.h
-@@ -19,6 +19,7 @@ void setup_thread_attr(pthread_attr_t *attr, size_t stacksize, int detached);
- int systemd_service_enabled(const char *dev);
- int get_linux_version_code(void);
- int parse_prkey(char *ptr, uint64_t *prkey);
-+int parse_prkey_flags(char *ptr, uint64_t *prkey, uint8_t *flags);
- int safe_write(int fd, const void *buf, size_t count);
- 
- #define KERNEL_VERSION(maj, min, ptc) ((((maj) * 256) + (min)) * 256 + (ptc))
-diff --git a/multipath/multipath.conf.5 b/multipath/multipath.conf.5
-index 31f4585..30d8598 100644
---- a/multipath/multipath.conf.5
-+++ b/multipath/multipath.conf.5
-@@ -726,14 +726,17 @@ This is the service action reservation key used by mpathpersist. It must be
- set for all multipath devices using persistent reservations, and it must be
- the same as the RESERVATION KEY field of the PERSISTENT RESERVE OUT parameter
- list which contains an 8-byte value provided by the application client to the
--device server to identify the I_T nexus.
-+device server to identify the I_T nexus. If the \fI--param-aptpl\fR option is
-+used when registering the key with mpathpersist, \fB:aptpl\fR must be appended
-+to the end of the reservation key.
- .RS
- .PP
- Alternatively, this can be set to \fBfile\fR, which will store the RESERVATION
- KEY registered by mpathpersist in the \fIprkeys_file\fR. multipathd will then
- use this key to register additional paths as they appear.  When the
- registration is removed, the RESERVATION KEY is removed from the
--\fIprkeys_file\fR.
-+\fIprkeys_file\fR. The prkeys file will automatically keep track of whether
-+the key was registered with \fI--param-aptpl\fR.
- .TP
- The default is: \fB<unset>\fR
- .RE
-diff --git a/multipathd/cli_handlers.c b/multipathd/cli_handlers.c
-index ba50fb8..6452796 100644
---- a/multipathd/cli_handlers.c
-+++ b/multipathd/cli_handlers.c
-@@ -21,6 +21,7 @@
- #include "sysfs.h"
- #include <errno.h>
- #include <libudev.h>
-+#include <mpath_persist.h>
- #include "util.h"
- #include "prkey.h"
- #include "propsel.h"
-@@ -1463,6 +1464,7 @@ cli_getprkey(void * v, char ** reply, int * len, void * data)
- 	struct multipath * mpp;
- 	struct vectors * vecs = (struct vectors *)data;
- 	char *mapname = get_keyparam(v, MAP);
-+	char *flagstr = "";
- 
- 	mapname = convert_dev(mapname, 0);
- 	condlog(3, "%s: get persistent reservation key (operator)", mapname);
-@@ -1478,8 +1480,10 @@ cli_getprkey(void * v, char ** reply, int * len, void * data)
- 		*len = strlen(*reply) + 1;
- 		return 0;
- 	}
--	snprintf(*reply, 20, "0x%" PRIx64 "\n",
--		 get_be64(mpp->reservation_key));
-+	if (mpp->sa_flags & MPATH_F_APTPL_MASK)
-+		flagstr = ":aptpl";
-+	snprintf(*reply, 20, "0x%" PRIx64 "%s\n",
-+		 get_be64(mpp->reservation_key), flagstr);
- 	(*reply)[19] = '\0';
- 	*len = strlen(*reply) + 1;
- 	return 0;
-@@ -1503,7 +1507,7 @@ cli_unsetprkey(void * v, char ** reply, int * len, void * data)
- 
- 	conf = get_multipath_config();
- 	pthread_cleanup_push(put_multipath_config, conf);
--	ret = set_prkey(conf, mpp, 0);
-+	ret = set_prkey(conf, mpp, 0, 0);
- 	pthread_cleanup_pop(1);
- 
- 	return ret;
-@@ -1517,6 +1521,7 @@ cli_setprkey(void * v, char ** reply, int * len, void * data)
- 	char *mapname = get_keyparam(v, MAP);
- 	char *keyparam = get_keyparam(v, KEY);
- 	uint64_t prkey;
-+	uint8_t flags;
- 	int ret;
- 	struct config *conf;
- 
-@@ -1527,14 +1532,14 @@ cli_setprkey(void * v, char ** reply, int * len, void * data)
- 	if (!mpp)
- 		return 1;
- 
--	if (parse_prkey(keyparam, &prkey) != 0) {
-+	if (parse_prkey_flags(keyparam, &prkey, &flags) != 0) {
- 		condlog(0, "%s: invalid prkey : '%s'", mapname, keyparam);
- 		return 1;
- 	}
- 
- 	conf = get_multipath_config();
- 	pthread_cleanup_push(put_multipath_config, conf);
--	ret = set_prkey(conf, mpp, prkey);
-+	ret = set_prkey(conf, mpp, prkey, flags);
- 	pthread_cleanup_pop(1);
- 
- 	return ret;
-diff --git a/multipathd/main.c b/multipathd/main.c
-index d40c416..6b1e782 100644
---- a/multipathd/main.c
-+++ b/multipathd/main.c
-@@ -3089,6 +3089,7 @@ void *  mpath_pr_event_handler_fn (void * pathp )
- 
- 	param= malloc(sizeof(struct prout_param_descriptor));
- 	memset(param, 0 , sizeof(struct prout_param_descriptor));
-+	param->sa_flags = mpp->sa_flags;
- 	memcpy(param->sa_key, &mpp->reservation_key, 8);
- 	param->num_transportid = 0;
- 
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0018-multipath-don-t-check-timestamps-without-a-path.patch

@@ -1,34 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Benjamin Marzinski <bmarzins@redhat.com>
-Date: Tue, 5 Jun 2018 15:31:55 -0500
-Subject: [PATCH] multipath: don't check timestamps without a path
-
-If a path was blacklisted, pathvec could exist but have no path in it.
-print_cmd_valid wasn't checking this before calling
-find_multipaths_check_timeout(). This was causing it to dereference a
-NULL pointer in these cases.
-
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- multipath/main.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
-diff --git a/multipath/main.c b/multipath/main.c
-index c69e996..3f0a6aa 100644
---- a/multipath/main.c
-+++ b/multipath/main.c
-@@ -482,10 +482,8 @@ static int print_cmd_valid(int k, const vector pathvec,
- 			pp, pp->find_multipaths_timeout, &until);
- 		if (wait != FIND_MULTIPATHS_WAITING)
- 			k = 1;
--	} else if (pathvec != NULL) {
--		pp = VECTOR_SLOT(pathvec, 0);
-+	} else if (pathvec != NULL && (pp = VECTOR_SLOT(pathvec, 0)))
- 		wait = find_multipaths_check_timeout(pp, 0, &until);
--	}
- 	if (wait == FIND_MULTIPATHS_WAITING)
- 		printf("FIND_MULTIPATHS_WAIT_UNTIL=\"%ld.%06ld\"\n",
- 			       until.tv_sec, until.tv_nsec/1000);
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0019-libmultipath-fix-detect-alua-corner-case.patch

@@ -1,35 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Benjamin Marzinski <bmarzins@redhat.com>
-Date: Fri, 8 Jun 2018 17:12:37 -0500
-Subject: [PATCH] libmultipath: fix detect alua corner case
-
-If retain_attach_hw_handler = no, then the paths tpgs state will never
-be checked, and the multipath device will always select the alua
-handler, if no other handler is selected. the paths tpgs state
-should be checked, regardless of the retain_hwhandler value.
-
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- libmultipath/propsel.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
-diff --git a/libmultipath/propsel.c b/libmultipath/propsel.c
-index 62a6893..f626c74 100644
---- a/libmultipath/propsel.c
-+++ b/libmultipath/propsel.c
-@@ -403,9 +403,11 @@ int select_hwhandler(struct config *conf, struct multipath *mp)
- 	bool all_tpgs = true;
- 
- 	dh_state = &handler[2];
-+
-+	vector_foreach_slot(mp->paths, pp, i)
-+		all_tpgs = all_tpgs && (pp->tpgs > 0);
- 	if (mp->retain_hwhandler != RETAIN_HWHANDLER_OFF) {
- 		vector_foreach_slot(mp->paths, pp, i) {
--			all_tpgs = all_tpgs && (pp->tpgs > 0);
- 			if (get_dh_state(pp, dh_state, sizeof(handler) - 2) > 0
- 			    && strcmp(dh_state, "detached")) {
- 				memcpy(handler, "1 ", 2);
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0020-multipath-fix-setting-conf-version.patch

@@ -1,39 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Benjamin Marzinski <bmarzins@redhat.com>
-Date: Fri, 8 Jun 2018 17:23:07 -0500
-Subject: [PATCH] multipath: fix setting conf->version
-
-Commit d3b71498 stopped multipath from setting conf->version. Instead,
-it was always being set to 0.0.0. Multipathd was still setting this
-correctly.
-
-Fixes: d3b71498 "multipath: fix rcu thread cancellation hang"
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- libmultipath/devmapper.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/libmultipath/devmapper.c b/libmultipath/devmapper.c
-index f2befad..8136d15 100644
---- a/libmultipath/devmapper.c
-+++ b/libmultipath/devmapper.c
-@@ -245,13 +245,13 @@ void libmp_dm_init(void)
- 	int verbosity;
- 	unsigned int version[3];
- 
-+	if (dm_prereq(version))
-+		exit(1);
- 	conf = get_multipath_config();
- 	verbosity = conf->verbosity;
--	memcpy(version, conf->version, sizeof(version));
-+	memcpy(conf->version, version, sizeof(version));
- 	put_multipath_config(conf);
- 	dm_init(verbosity);
--	if (dm_prereq(version))
--		exit(1);
- 	dm_udev_set_sync_support(libmp_dm_udev_sync);
- }
- 
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0021-RH-fixup-udev-rules-for-redhat.patch

@@ -1,82 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Benjamin Marzinski <bmarzins@redhat.com>
-Date: Thu, 13 Apr 2017 07:22:23 -0500
-Subject: [PATCH] RH: fixup udev rules for redhat
-
-The multipath rules need to run after scsi_id is run. This means moving
-them after 60-persistent-storage.rules for redhat. Redhat also uses a
-different naming scheme for partitions than SuSE. Also, there are some
-false warnings that gcc throws because of the changed options. Fix these
-too.
-
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- Makefile.inc        | 2 +-
- kpartx/kpartx.rules | 2 +-
- multipath/Makefile  | 4 ++--
- multipath/main.c    | 2 +-
- 4 files changed, 5 insertions(+), 5 deletions(-)
-
-diff --git a/Makefile.inc b/Makefile.inc
-index af2f5ba..0b271ea 100644
---- a/Makefile.inc
-+++ b/Makefile.inc
-@@ -51,7 +51,7 @@ endif
- prefix		=
- exec_prefix	= $(prefix)
- usr_prefix	= $(prefix)
--bindir		= $(exec_prefix)/sbin
-+bindir		= $(exec_prefix)/usr/sbin
- libudevdir	= $(prefix)/$(SYSTEMDPATH)/udev
- udevrulesdir	= $(libudevdir)/rules.d
- multipathdir	= $(TOPDIR)/libmultipath
-diff --git a/kpartx/kpartx.rules b/kpartx/kpartx.rules
-index 8f99049..8a3a171 100644
---- a/kpartx/kpartx.rules
-+++ b/kpartx/kpartx.rules
-@@ -32,6 +32,6 @@ LABEL="mpath_kpartx_end"
- GOTO="kpartx_end"
- 
- LABEL="run_kpartx"
--RUN+="/sbin/kpartx -un -p -part /dev/$name"
-+RUN+="/sbin/kpartx -un /dev/$name"
- 
- LABEL="kpartx_end"
-diff --git a/multipath/Makefile b/multipath/Makefile
-index 0828a8f..b9bbb3c 100644
---- a/multipath/Makefile
-+++ b/multipath/Makefile
-@@ -24,7 +24,7 @@ install:
- 	$(INSTALL_PROGRAM) -m 755 $(EXEC) $(DESTDIR)$(bindir)/
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(udevrulesdir)
- 	$(INSTALL_PROGRAM) -m 644 11-dm-mpath.rules $(DESTDIR)$(udevrulesdir)
--	$(INSTALL_PROGRAM) -m 644 $(EXEC).rules $(DESTDIR)$(libudevdir)/rules.d/56-multipath.rules
-+	$(INSTALL_PROGRAM) -m 644 $(EXEC).rules $(DESTDIR)$(libudevdir)/rules.d/62-multipath.rules
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(man8dir)
- 	$(INSTALL_PROGRAM) -m 644 $(EXEC).8.gz $(DESTDIR)$(man8dir)
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(man5dir)
-@@ -33,7 +33,7 @@ install:
- uninstall:
- 	$(RM) $(DESTDIR)$(bindir)/$(EXEC)
- 	$(RM) $(DESTDIR)$(udevrulesdir)/11-dm-mpath.rules
--	$(RM) $(DESTDIR)$(libudevdir)/rules.d/56-multipath.rules
-+	$(RM) $(DESTDIR)$(libudevdir)/rules.d/62-multipath.rules
- 	$(RM) $(DESTDIR)$(man8dir)/$(EXEC).8.gz
- 	$(RM) $(DESTDIR)$(man5dir)/$(EXEC).conf.5.gz
- 
-diff --git a/multipath/main.c b/multipath/main.c
-index 3f0a6aa..6fdde03 100644
---- a/multipath/main.c
-+++ b/multipath/main.c
-@@ -389,7 +389,7 @@ static int find_multipaths_check_timeout(const struct path *pp, long tmo,
- 	struct timespec now, ftimes[2], tdiff;
- 	struct stat st;
- 	long fd;
--	int r, err, retries = 0;
-+	int r, err = 0, retries = 0;
- 
- 	clock_gettime(CLOCK_REALTIME, &now);
- 
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0022-RH-Remove-the-property-blacklist-exception-builtin.patch

@@ -1,87 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Benjamin Marzinski <bmarzins@redhat.com>
-Date: Wed, 2 Jul 2014 12:49:53 -0500
-Subject: [PATCH] RH: Remove the property blacklist exception builtin
-
-Multipath set the default property blacklist exceptions to
-(ID_SCSI_VPD|ID_WWN).  This has the effect of blacklisting some internal
-devices.  These devices may never have multiple paths, but it is nice
-to be able to set multipath up on them all the same.  This patch simply
-removes the default, and makes it so that if no property
-blacklist_exception is given, then devices aren't failed for not matching
-it.
-
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- libmultipath/blacklist.c   | 15 ++++++---------
- multipath/multipath.conf.5 | 14 ++++++++------
- 2 files changed, 14 insertions(+), 15 deletions(-)
-
-diff --git a/libmultipath/blacklist.c b/libmultipath/blacklist.c
-index ee396e2..19d4697 100644
---- a/libmultipath/blacklist.c
-+++ b/libmultipath/blacklist.c
-@@ -181,12 +181,6 @@ setup_default_blist (struct config * conf)
- 	if (store_ble(conf->blist_devnode, str, ORIGIN_DEFAULT))
- 		return 1;
- 
--	str = STRDUP("(SCSI_IDENT_|ID_WWN)");
--	if (!str)
--		return 1;
--	if (store_ble(conf->elist_property, str, ORIGIN_DEFAULT))
--		return 1;
--
- 	vector_foreach_slot (conf->hwtable, hwe, i) {
- 		if (hwe->bl_product) {
- 			if (_blacklist_device(conf->blist_device, hwe->vendor,
-@@ -390,9 +384,12 @@ filter_property(struct config * conf, struct udev_device * udev)
- 	 * This is the inverse of the 'normal' matching;
- 	 * the environment variable _has_ to match.
- 	 */
--	log_filter(devname, NULL, NULL, NULL, NULL,
--		   MATCH_PROPERTY_BLIST_MISSING);
--	return MATCH_PROPERTY_BLIST_MISSING;
-+	if (VECTOR_SIZE(conf->elist_property)) {
-+		log_filter(devname, NULL, NULL, NULL, NULL,
-+			   MATCH_PROPERTY_BLIST_MISSING);
-+		return MATCH_PROPERTY_BLIST_MISSING;
-+	}
-+	return 0;
- }
- 
- void
-diff --git a/multipath/multipath.conf.5 b/multipath/multipath.conf.5
-index 30d8598..c45da9f 100644
---- a/multipath/multipath.conf.5
-+++ b/multipath/multipath.conf.5
-@@ -1179,10 +1179,6 @@ The \fIWorld Wide Identification\fR of a device.
- .TP
- .B property
- Regular expression of the udev property to be whitelisted.
--.RS
--.TP
--The default is: \fB(SCSI_IDENT_|ID_WWN)\fR
--.RE
- .TP
- .B device
- Subsection for the device description. This subsection recognizes the
-@@ -1193,8 +1189,14 @@ keywords. For a full description of these keywords please see the \fIdevices\fR
- section description.
- .LP
- The \fIproperty\fR whitelist handling is different from the usual
--handling in the sense that the device \fIhas\fR to have a udev property that
--matches the whitelist, otherwise the device will be blacklisted. In these cases the message \fIblacklisted, udev property missing\fR will be displayed.
-+handling in the sense that if the propery whitelist is set, the device
-+\fIhas\fR to have a udev property that matches the whitelist, otherwise the
-+device will be blacklisted. In these cases the message \fIblacklisted, udev
-+property missing\fR will be displayed. For example settting the
-+property blacklist_exception to \fB(SCSI_IDENT_|ID_WWN)\fR will blacklist
-+all devices that have no udev property whose name regex matches either
-+\fBSCSI_IDENT_\fR or \fBID_WWN\fR. This works to exclude most
-+non-multipathable devices.
- .
- .
- .\" ----------------------------------------------------------------------------
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0023-RH-don-t-start-without-a-config-file.patch

@@ -1,106 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Benjamin Marzinski <bmarzins@redhat.com>
-Date: Wed, 15 Oct 2014 10:39:30 -0500
-Subject: [PATCH] RH: don't start without a config file
-
-If /etc/multipath.conf doesn't exist, don't start multipathd and blacklist
-all devices when running multipath.  A completely blank configuration file
-is almost never what users want.  Also, people may have the multipath
-packages installed but don't want to use them.  This patch provides a
-simple way to disable multipath.  Simply removing or renaming
-/etc/multipath.conf will keep multipath from doing anything.
-
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- libmultipath/config.c         | 15 +++++++++++++++
- libmultipath/config.h         |  1 +
- multipath/multipath.rules     |  1 +
- multipathd/multipathd.8       |  2 ++
- multipathd/multipathd.service |  1 +
- 5 files changed, 20 insertions(+)
-
-diff --git a/libmultipath/config.c b/libmultipath/config.c
-index 5872927..0607403 100644
---- a/libmultipath/config.c
-+++ b/libmultipath/config.c
-@@ -26,6 +26,7 @@
- #include "devmapper.h"
- #include "mpath_cmd.h"
- #include "propsel.h"
-+#include "version.h"
- 
- static int
- hwe_strmatch (struct hwentry *hwe1, struct hwentry *hwe2)
-@@ -658,6 +659,20 @@ load_config (char * file)
- 			factorize_hwtable(conf->hwtable, builtin_hwtable_size);
- 		}
- 
-+	} else {
-+		condlog(0, "/etc/multipath.conf does not exist, blacklisting all devices.");
-+		if (conf->blist_devnode == NULL) {
-+			conf->blist_devnode = vector_alloc();
-+			if (!conf->blist_devnode) {
-+				condlog(0, "cannot allocate blacklist\n");
-+				goto out;
-+			}
-+		}
-+		if (store_ble(conf->blist_devnode, strdup(".*"),
-+		              ORIGIN_NO_CONFIG)) {
-+			condlog(0, "cannot store default no-config blacklist\n");
-+			goto out;
-+		}
- 	}
- 
- 	conf->processed_main_config = 1;
-diff --git a/libmultipath/config.h b/libmultipath/config.h
-index fcbe3fc..3a42435 100644
---- a/libmultipath/config.h
-+++ b/libmultipath/config.h
-@@ -9,6 +9,7 @@
- 
- #define ORIGIN_DEFAULT 0
- #define ORIGIN_CONFIG  1
-+#define ORIGIN_NO_CONFIG 2
- 
- /*
-  * In kernel, fast_io_fail == 0 means immediate failure on rport delete.
-diff --git a/multipath/multipath.rules b/multipath/multipath.rules
-index d658073..b3f54d7 100644
---- a/multipath/multipath.rules
-+++ b/multipath/multipath.rules
-@@ -9,6 +9,7 @@ IMPORT{cmdline}="nompath"
- ENV{nompath}=="?*", GOTO="end_mpath"
- IMPORT{cmdline}="multipath"
- ENV{multipath}=="off", GOTO="end_mpath"
-+TEST!="/etc/multipath.conf", GOTO="end_mpath"
- 
- ENV{DEVTYPE}!="partition", GOTO="test_dev"
- IMPORT{parent}="DM_MULTIPATH_DEVICE_PATH"
-diff --git a/multipathd/multipathd.8 b/multipathd/multipathd.8
-index e78ac9e..09cdead 100644
---- a/multipathd/multipathd.8
-+++ b/multipathd/multipathd.8
-@@ -38,6 +38,8 @@ map regains its maximum performance and redundancy.
- This daemon executes the external \fBmultipath\fR tool when events occur.
- In turn, the multipath tool signals the multipathd daemon when it is done with
- devmap reconfiguration, so that it can refresh its failed path list.
-+
-+In this Linux distribution, multipathd does not run unless a /etc/multipath.conf file exists.
- .
- .
- .\" ----------------------------------------------------------------------------
-diff --git a/multipathd/multipathd.service b/multipathd/multipathd.service
-index ba24983..17434ce 100644
---- a/multipathd/multipathd.service
-+++ b/multipathd/multipathd.service
-@@ -4,6 +4,7 @@ Wants=systemd-udev-trigger.service systemd-udev-settle.service
- Before=iscsi.service iscsid.service lvm2-activation-early.service
- Before=local-fs-pre.target blk-availability.service
- After=multipathd.socket systemd-udev-trigger.service systemd-udev-settle.service
-+ConditionPathExists=/etc/multipath.conf
- DefaultDependencies=no
- Conflicts=shutdown.target
- ConditionKernelCommandLine=!nompath
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0024-RH-use-rpm-optflags-if-present.patch

@@ -1,52 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Benjamin Marzinski <bmarzins@redhat.com>
-Date: Wed, 19 Apr 2017 06:10:01 -0500
-Subject: [PATCH] RH: use rpm optflags if present
-
-Use the passed in optflags when compiling as an RPM, and keep the
-default flags as close as possible to the current fedora flags, while
-still being generic.
-
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- Makefile.inc | 24 ++++++++++++++++--------
- 1 file changed, 16 insertions(+), 8 deletions(-)
-
-diff --git a/Makefile.inc b/Makefile.inc
-index 0b271ea..5ff69a3 100644
---- a/Makefile.inc
-+++ b/Makefile.inc
-@@ -85,14 +85,22 @@ TEST_CC_OPTION = $(shell \
- 		echo "$(2)"; \
- 	fi)
- 
--STACKPROT := $(call TEST_CC_OPTION,-fstack-protector-strong,-fstack-protector)
--
--OPTFLAGS	= -O2 -g -pipe -Wall -Wextra -Wformat=2 -Werror=implicit-int \
--		  -Werror=implicit-function-declaration -Werror=format-security \
--		  -Wno-sign-compare -Wno-unused-parameter -Wno-clobbered \
--		  -Werror=cast-qual -Werror=discarded-qualifiers \
--		  -Wp,-D_FORTIFY_SOURCE=2 $(STACKPROT) \
--		  --param=ssp-buffer-size=4
-+ifndef RPM_OPT_FLAGS
-+	STACKPROT := $(call TEST_CC_OPTION,-fstack-protector-strong,-fstack-protector)
-+	OPTFLAGS	= -O2 -g -pipe -Wall -Werror=format-security \
-+			  -Wp,-D_FORTIFY_SOURCE=2 -fexceptions \
-+			  $(STACKPROT) --param=ssp-buffer-size=4 \
-+			  -grecord-gcc-switches
-+	ifeq ($(shell test -f /usr/lib/rpm/redhat/redhat-hardened-cc1 && echo 1),1)
-+		OPTFLAGS += -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1
-+	endif
-+else
-+	OPTFLAGS = $(RPM_OPT_FLAGS)
-+endif
-+OPTFLAGS	+= -Wextra -Wstrict-prototypes -Wformat=2 -Werror=implicit-int \
-+		   -Werror=implicit-function-declaration -Wno-sign-compare \
-+		   -Wno-unused-parameter -Werror=cast-qual \
-+		   -Werror=discarded-qualifiers
- 
- CFLAGS		:= $(OPTFLAGS) -DBIN_DIR=\"$(bindir)\" -DLIB_STRING=\"${LIB}\" -DRUN_DIR=\"${RUN}\" \
- 		   -MMD -MP $(CFLAGS)
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0025-RH-add-mpathconf.patch

@@ -1,648 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Benjamin Marzinski <bmarzins@redhat.com>
-Date: Thu, 16 Oct 2014 15:49:01 -0500
-Subject: [PATCH] RH: add mpathconf
-
-mpathconf is a program (largely based on lvmcomf) to help users
-configure /etc/multipath.conf and enable or disable multipathing.  It
-has a couple of built-in options that can be set directly from the
-command line.  But, mostly it is used to get a multipath.conf file
-with the OS defaults, and to enable and disable multipathing via
-a single command.
-
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- libmultipath/config.c |   1 +
- multipath/Makefile    |   5 +
- multipath/mpathconf   | 464 ++++++++++++++++++++++++++++++++++++++++++++++++++
- multipath/mpathconf.8 | 101 +++++++++++
- 4 files changed, 571 insertions(+)
- create mode 100644 multipath/mpathconf
- create mode 100644 multipath/mpathconf.8
-
-diff --git a/libmultipath/config.c b/libmultipath/config.c
-index 0607403..5c98e48 100644
---- a/libmultipath/config.c
-+++ b/libmultipath/config.c
-@@ -661,6 +661,7 @@ load_config (char * file)
- 
- 	} else {
- 		condlog(0, "/etc/multipath.conf does not exist, blacklisting all devices.");
-+		condlog(0, "You can run /sbin/mpathconf to create or modify /etc/multipath.conf");
- 		if (conf->blist_devnode == NULL) {
- 			conf->blist_devnode = vector_alloc();
- 			if (!conf->blist_devnode) {
-diff --git a/multipath/Makefile b/multipath/Makefile
-index b9bbb3c..e720c7f 100644
---- a/multipath/Makefile
-+++ b/multipath/Makefile
-@@ -18,10 +18,12 @@ $(EXEC): $(OBJS) $(multipathdir)/libmultipath.so $(mpathcmddir)/libmpathcmd.so
- 	$(CC) $(CFLAGS) $(OBJS) -o $(EXEC) $(LDFLAGS) $(LIBDEPS)
- 	$(GZIP) $(EXEC).8 > $(EXEC).8.gz
- 	$(GZIP) $(EXEC).conf.5 > $(EXEC).conf.5.gz
-+	$(GZIP) mpathconf.8 > mpathconf.8.gz
- 
- install:
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(bindir)
- 	$(INSTALL_PROGRAM) -m 755 $(EXEC) $(DESTDIR)$(bindir)/
-+	$(INSTALL_PROGRAM) -m 755 mpathconf $(DESTDIR)$(bindir)/
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(udevrulesdir)
- 	$(INSTALL_PROGRAM) -m 644 11-dm-mpath.rules $(DESTDIR)$(udevrulesdir)
- 	$(INSTALL_PROGRAM) -m 644 $(EXEC).rules $(DESTDIR)$(libudevdir)/rules.d/62-multipath.rules
-@@ -29,13 +31,16 @@ install:
- 	$(INSTALL_PROGRAM) -m 644 $(EXEC).8.gz $(DESTDIR)$(man8dir)
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(man5dir)
- 	$(INSTALL_PROGRAM) -m 644 $(EXEC).conf.5.gz $(DESTDIR)$(man5dir)
-+	$(INSTALL_PROGRAM) -m 644 mpathconf.8.gz $(DESTDIR)$(man8dir)
- 
- uninstall:
- 	$(RM) $(DESTDIR)$(bindir)/$(EXEC)
- 	$(RM) $(DESTDIR)$(udevrulesdir)/11-dm-mpath.rules
- 	$(RM) $(DESTDIR)$(libudevdir)/rules.d/62-multipath.rules
-+	$(RM) $(DESTDIR)$(bindir)/mpathconf
- 	$(RM) $(DESTDIR)$(man8dir)/$(EXEC).8.gz
- 	$(RM) $(DESTDIR)$(man5dir)/$(EXEC).conf.5.gz
-+	$(RM) $(DESTDIR)$(man8dir)/mpathconf.8.gz
- 
- clean: dep_clean
- 	$(RM) core *.o $(EXEC) *.gz
-diff --git a/multipath/mpathconf b/multipath/mpathconf
-new file mode 100644
-index 0000000..e839134
---- /dev/null
-+++ b/multipath/mpathconf
-@@ -0,0 +1,464 @@
-+#!/bin/bash
-+#
-+# Copyright (C) 2010 Red Hat, Inc. All rights reserved.
-+#
-+# This file is part of the device-mapper-multipath package.
-+#
-+# This copyrighted material is made available to anyone wishing to use,
-+# modify, copy, or redistribute it subject to the terms and conditions
-+# of the GNU General Public License v.2.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software Foundation,
-+# Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+
-+#
-+# Simple editting of /etc/multipath.conf
-+# This program was largely ripped off from lvmconf
-+#
-+
-+unset ENABLE FIND FRIENDLY MODULE MULTIPATHD HAVE_DISABLE HAVE_WWID_DISABLE HAVE_FIND HAVE_BLACKLIST HAVE_EXCEPTIONS HAVE_DEFAULTS HAVE_FRIENDLY HAVE_MULTIPATHD HAVE_MODULE HAVE_OUTFILE SHOW_STATUS CHANGED_CONFIG WWID_LIST
-+
-+DEFAULT_CONFIG="# device-mapper-multipath configuration file
-+
-+# For a complete list of the default configuration values, run either:
-+# # multipath -t
-+# or
-+# # multipathd show config
-+
-+# For a list of configuration options with descriptions, see the
-+# multipath.conf man page.
-+
-+defaults {
-+	user_friendly_names yes
-+	find_multipaths yes
-+}
-+
-+blacklist_exceptions {
-+        property \"(SCSI_IDENT_|ID_WWN)\"
-+}"
-+
-+CONFIGFILE="/etc/multipath.conf"
-+OUTPUTFILE="/etc/multipath.conf"
-+MULTIPATHDIR="/etc/multipath"
-+TMPFILE="/etc/multipath/.multipath.conf.tmp"
-+WWIDS=0
-+
-+function usage
-+{
-+	echo "usage: $0 <command>"
-+	echo ""
-+	echo "Commands:"
-+	echo "Enable: --enable "
-+	echo "Disable: --disable"
-+	echo "Only allow certain wwids (instead of enable): --allow <WWID>"
-+	echo "Set user_friendly_names (Default y): --user_friendly_names <y|n>"
-+	echo "Set find_multipaths (Default y): --find_multipaths <y|n>"
-+	echo "Load the dm-multipath modules on enable (Default y): --with_module <y|n>"
-+	echo "start/stop/reload multipathd (Default n): --with_multipathd <y|n>"
-+	echo "select output file (Default /etc/multipath.conf): --outfile <FILE>"
-+	echo ""
-+}
-+
-+function add_wwid
-+{
-+	INDEX=0
-+	while [ "$INDEX" -lt "$WWIDS" ] ; do
-+		if [ "$1" = "${WWID_LIST[$INDEX]}" ] ; then
-+			return
-+		fi
-+		((INDEX++))
-+	done
-+	WWID_LIST[$WWIDS]="$1"
-+	((WWIDS++))
-+}
-+
-+function get_dm_deps
-+{
-+	shift 3
-+	while [ -n "$1" -a -n "$2" ]; do
-+		MAJOR=$(echo $1 | tr -d '(,')
-+		MINOR=$(echo $2 | tr -d ')')
-+		UUID=`dmsetup info -c --noheadings -o uuid -j $MAJOR -m $MINOR  2> /dev/null`
-+		if [ -n "$UUID" ] ; then
-+			set_dm_wwid $UUID
-+		fi
-+		shift 2
-+	done
-+}
-+
-+function set_dm_wwid
-+{
-+	if [[ "$1" =~ ^part[[:digit:]]+-mpath- ]] ; then
-+		add_wwid "${1##part*-mpath-}"
-+	elif [[ "$1" =~ ^mpath- ]] ; then
-+		add_wwid "${1##mpath-}"
-+	else
-+		get_dm_deps `dmsetup deps -u $1`
-+	fi
-+}
-+
-+function set_wwid
-+{
-+	UUID=""
-+	if [[ "$1" =~ ^[[:digit:]]+:[[:digit:]]+$ ]] ; then
-+		MAJOR=${1%%:*}
-+		MINOR=${1##*:}
-+		UUID=`dmsetup info -c --noheadings -o uuid -j $MAJOR -m $MINOR  2> /dev/null`
-+	else
-+		UUID=`dmsetup info -c --noheadings -o uuid $1 2> /dev/null`
-+	fi
-+	if [ -n "$UUID" ] ; then
-+		set_dm_wwid $UUID
-+	else
-+		add_wwid "$1"
-+	fi
-+}
-+
-+function parse_args
-+{
-+	while [ -n "$1" ]; do
-+		case $1 in
-+			--enable)
-+				ENABLE=1
-+				shift
-+				;;
-+			--disable)
-+				ENABLE=0
-+				shift
-+				;;
-+			--allow)
-+				ENABLE=2
-+				if [ -n "$2" ]; then
-+					set_wwid $2
-+					shift 2
-+				else
-+					usage
-+					exit 1
-+				fi
-+				;;
-+			--user_friendly_names)
-+				if [ -n "$2" ]; then
-+					FRIENDLY=$2
-+					shift 2
-+				else
-+					usage
-+					exit 1
-+				fi
-+				;;
-+			--find_multipaths)
-+				if [ -n "$2" ]; then
-+					FIND=$2
-+					shift 2
-+				else
-+					usage
-+					exit 1
-+				fi
-+				;;
-+			--with_module)
-+				if [ -n "$2" ]; then
-+					MODULE=$2
-+					shift 2
-+				else
-+					usage
-+					exit 1
-+				fi
-+				;;
-+			--with_multipathd)
-+				if [ -n "$2" ]; then
-+					MULTIPATHD=$2
-+					shift 2
-+				else
-+					usage
-+					exit 1
-+				fi
-+				;;
-+			--outfile)
-+				if [ -n "$2" ]; then
-+					OUTPUTFILE=$2
-+					HAVE_OUTFILE=1
-+					shift 2
-+				else
-+					usage
-+					exit 1
-+				fi
-+				;;
-+			*)
-+				usage
-+				exit
-+		esac
-+	done
-+}
-+
-+function validate_args
-+{
-+	if [ "$ENABLE" = "0" ] && [ -n "$FRIENDLY" -o -n "$FIND" -o -n "$MODULE" ]; then
-+		echo "ignoring extra parameters on disable"
-+		FRIENDLY=""
-+		FIND=""
-+		MODULE=""
-+	fi
-+	if [ -n "$FRIENDLY" ] && [ "$FRIENDLY" != "y" -a "$FRIENDLY" != "n" ]; then
-+		echo "--user_friendly_names must be either 'y' or 'n'"
-+		exit 1
-+	fi
-+	if [ -n "$FIND" ] && [ "$FIND" != "y" -a "$FIND" != "n" ]; then
-+		echo "--find_multipaths must be either 'y' or 'n'"
-+		exit 1
-+	fi
-+	if [ -z "$ENABLE" -a -z "$FIND" -a -z "$FRIENDLY" ]; then
-+		SHOW_STATUS=1
-+	fi
-+	if [ -n "$MODULE" ] && [ "$MODULE" != "y" -a "$MODULE" != "n" ]; then
-+		echo "--with_module must be either 'y' or 'n'"
-+		exit 1
-+	fi
-+	if [ -n "$MULTIPATHD" ] && [ "$MULTIPATHD" != "y" -a "$MULTIPATHD" != "n" ]; then
-+		echo "--with_multipathd must be either 'y' or 'n'"
-+		exit 1
-+	fi
-+	if [ "$ENABLE" = 2 -a -z "$HAVE_OUTFILE" ]; then
-+		echo "Because --allow makes changes that cannot be automatically reversed,"
-+		echo "you must set --outfile when you set --allow"
-+		exit 1
-+	fi
-+}
-+
-+function add_blacklist_exceptions
-+{
-+	INDEX=0
-+	while [ "$INDEX" -lt "$WWIDS" ] ; do
-+		sed -i '/^blacklist_exceptions[[:space:]]*{/ a\
-+	wwid '"\"${WWID_LIST[$INDEX]}\""'
-+' $TMPFILE
-+		((INDEX++))
-+	done
-+}
-+
-+umask 0077
-+
-+parse_args "$@"
-+
-+validate_args
-+
-+if [ ! -d "$MULTIPATHDIR" ]; then
-+	echo "/etc/multipath/ does not exist. failing"
-+	exit 1
-+fi
-+
-+rm $TMPFILE 2> /dev/null
-+echo "$DEFAULT_CONFIG" > $TMPFILE
-+if [ -f "$CONFIGFILE" ]; then
-+	cp $CONFIGFILE $TMPFILE
-+fi
-+
-+if grep -q "^blacklist[[:space:]]*{" $TMPFILE ; then
-+	HAVE_BLACKLIST=1
-+fi
-+
-+if grep -q "^blacklist_exceptions[[:space:]]*{" $TMPFILE ; then
-+	HAVE_EXCEPTIONS=1
-+fi
-+
-+if grep -q "^defaults[[:space:]]*{" $TMPFILE ; then
-+	HAVE_DEFAULTS=1
-+fi
-+
-+if [ -z "$MODULE" -o "$MODULE" = "y" ]; then
-+	if lsmod | grep -q "dm_multipath" ; then
-+		HAVE_MODULE=1
-+	else
-+		HAVE_MODULE=0
-+	fi
-+fi
-+
-+if [ "$MULTIPATHD" = "y" ]; then
-+	if /bin/systemctl status multipathd.service > /dev/null 2>&1 ; then
-+		HAVE_MULTIPATHD=1
-+	else
-+		HAVE_MULTIPATHD=0
-+	fi
-+fi
-+
-+if [ "$HAVE_BLACKLIST" = "1" ]; then
-+	if sed -n '/^blacklist[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*devnode \"\.\?\*\"" ; then
-+		HAVE_DISABLE=1
-+	elif sed -n '/^blacklist[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*#[[:space:]]*devnode \"\.\?\*\"" ; then
-+		HAVE_DISABLE=0
-+	fi
-+fi
-+
-+if [ "$HAVE_BLACKLIST" = "1" ]; then
-+	if sed -n '/^blacklist[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*wwid \"\.\?\*\"" ; then
-+		HAVE_WWID_DISABLE=1
-+	elif sed -n '/^blacklist[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*#[[:space:]]*wwid \"\.\?\*\"" ; then
-+		HAVE_WWID_DISABLE=0
-+	fi
-+fi
-+
-+if [ "$HAVE_DEFAULTS" = "1" ]; then
-+	if sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*find_multipaths[[:space:]]*\(yes\|1\)" ; then
-+		HAVE_FIND=1
-+	elif sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*find_multipaths[[:space:]]*\(no\|0\)" ; then
-+		HAVE_FIND=0
-+	fi
-+	if sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*user_friendly_names[[:space:]]*\(yes\|1\)" ; then
-+		HAVE_FRIENDLY=1
-+	elif sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*user_friendly_names[[:space:]]*\(no\|0\)" ; then
-+		HAVE_FRIENDLY=0
-+	fi
-+fi
-+
-+if [ -n "$SHOW_STATUS" ]; then
-+	if [ -z "$HAVE_DISABLE" -o "$HAVE_DISABLE" = 0 ]; then
-+		echo "multipath is enabled"
-+	else
-+		echo "multipath is disabled"
-+	fi
-+	if [ -z "$HAVE_FIND"  -o "$HAVE_FIND" = 0 ]; then
-+		echo "find_multipaths is disabled"
-+	else
-+		echo "find_multipaths is enabled"
-+	fi
-+	if [ -z "$HAVE_FRIENDLY" -o "$HAVE_FRIENDLY" = 0 ]; then
-+		echo "user_friendly_names is disabled"
-+	else
-+		echo "user_friendly_names is enabled"
-+	fi
-+	if [ -n "$HAVE_MODULE" ]; then
-+		if [ "$HAVE_MODULE" = 1 ]; then
-+			echo "dm_multipath module is loaded"
-+		else
-+			echo "dm_multipath module is not loaded"
-+		fi
-+	fi
-+	if [ -z "$HAVE_MULTIPATHD" ]; then
-+		if /bin/systemctl status multipathd.service > /dev/null 2>&1 ; then
-+			HAVE_MULTIPATHD=1
-+		else
-+			HAVE_MULTIPATHD=0
-+		fi
-+	fi
-+	if [ "$HAVE_MULTIPATHD" = 1 ]; then
-+		echo "multipathd is running"
-+	else
-+		echo "multipathd is not running"
-+	fi
-+	exit 0
-+fi
-+
-+if [ -z "$HAVE_BLACKLIST" ]; then
-+	cat >> $TMPFILE <<- _EOF_
-+
-+blacklist {
-+}
-+_EOF_
-+fi
-+
-+if [ -z "$HAVE_DEFAULTS" ]; then
-+	cat >> $TMPFILE <<- _EOF_
-+
-+defaults {
-+}
-+_EOF_
-+fi
-+
-+if [ "$ENABLE" = 2 ]; then
-+	if [ "$HAVE_DISABLE" = 1 ]; then
-+		sed -i '/^blacklist[[:space:]]*{/,/^}/ s/^[[:space:]]*devnode \"\.\?\*\"/#	devnode ".*"/' $TMPFILE
-+	fi
-+	if [ -z "$HAVE_WWID_DISABLE" ]; then
-+		sed -i '/^blacklist[[:space:]]*{/ a\
-+	wwid ".*"
-+' $TMPFILE
-+	elif [ "$HAVE_WWID_DISABLE" = 0 ]; then
-+		sed -i '/^blacklist[[:space:]]*{/,/^}/ s/^[[:space:]]*#[[:space:]]*wwid \"\.\?\*\"/	wwid ".*"/' $TMPFILE
-+	fi
-+	if [ "$HAVE_EXCEPTIONS" = 1 ]; then
-+		sed -i '/^blacklist_exceptions[[:space:]]*{/,/^}/ {/^[[:space:]]*wwid/ d}' $TMPFILE
-+	else
-+		cat >> $TMPFILE <<- _EOF_
-+
-+blacklist_exceptions {
-+}
-+_EOF_
-+	fi
-+	add_blacklist_exceptions
-+elif [ "$ENABLE" = 1 ]; then
-+	if [ "$HAVE_DISABLE" = 1 ]; then
-+		sed -i '/^blacklist[[:space:]]*{/,/^}/ s/^[[:space:]]*devnode \"\.\?\*\"/#	devnode ".*"/' $TMPFILE
-+	fi
-+elif [ "$ENABLE" = 0 ]; then
-+	if [ -z "$HAVE_DISABLE" ]; then
-+		sed -i '/^blacklist[[:space:]]*{/ a\
-+	devnode ".*"
-+' $TMPFILE
-+	elif [ "$HAVE_DISABLE" = 0 ]; then
-+		sed -i '/^blacklist[[:space:]]*{/,/^}/ s/^[[:space:]]*#[[:space:]]*devnode \"\.\?\*\"/	devnode ".*"/' $TMPFILE
-+	fi
-+fi
-+
-+if [ "$FIND" = "n" ]; then
-+	if [ "$HAVE_FIND" = 1 ]; then
-+		sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*find_multipaths[[:space:]]*\(yes\|1\)/	find_multipaths no/' $TMPFILE
-+		CHANGED_CONFIG=1
-+	fi
-+elif [ "$FIND" = "y" ]; then
-+	if [ -z "$HAVE_FIND" ]; then
-+		sed -i '/^defaults[[:space:]]*{/ a\
-+	find_multipaths yes
-+' $TMPFILE
-+		CHANGED_CONFIG=1
-+	elif [ "$HAVE_FIND" = 0 ]; then
-+		sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*find_multipaths[[:space:]]*\(no\|0\)/	find_multipaths yes/' $TMPFILE
-+		CHANGED_CONFIG=1
-+	fi
-+fi
-+
-+if [ "$FRIENDLY" = "n" ]; then
-+	if [ "$HAVE_FRIENDLY" = 1 ]; then
-+		sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*user_friendly_names[[:space:]]*\(yes\|1\)/	user_friendly_names no/' $TMPFILE
-+		CHANGED_CONFIG=1
-+	fi
-+elif [ "$FRIENDLY" = "y" ]; then
-+	if [ -z "$HAVE_FRIENDLY" ]; then
-+		sed -i '/^defaults[[:space:]]*{/ a\
-+	user_friendly_names yes
-+' $TMPFILE
-+		CHANGED_CONFIG=1
-+	elif [ "$HAVE_FRIENDLY" = 0 ]; then
-+		sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*user_friendly_names[[:space:]]*\(no\|0\)/	user_friendly_names yes/' $TMPFILE
-+		CHANGED_CONFIG=1
-+	fi
-+fi
-+
-+if [ -f "$OUTPUTFILE" ]; then
-+	cp $OUTPUTFILE $OUTPUTFILE.old
-+	if [ $? != 0 ]; then
-+		echo "failed to backup old config file, $OUTPUTFILE not updated"
-+		exit 1
-+	fi
-+fi
-+
-+cp $TMPFILE $OUTPUTFILE
-+if [ $? != 0 ]; then
-+	echo "failed to copy new config file into place, check $OUTPUTFILE is still OK"
-+	exit 1
-+fi
-+
-+rm -f $TMPFILE
-+
-+if [ "$ENABLE" = 1 ]; then
-+	if [ "$HAVE_MODULE" = 0 ]; then
-+		modprobe dm_multipath
-+	fi
-+	if [ "$HAVE_MULTIPATHD" = 0 ]; then
-+		systemctl start multipathd.service
-+	fi
-+elif [ "$ENABLE" = 0 ]; then
-+	if [ "$HAVE_MULTIPATHD" = 1 ]; then
-+		systemctl stop multipathd.service
-+	fi
-+elif [ -n "$CHANGED_CONFIG" -a "$HAVE_MULTIPATHD" = 1 ]; then
-+	systemctl reload multipathd.service
-+fi
-diff --git a/multipath/mpathconf.8 b/multipath/mpathconf.8
-new file mode 100644
-index 0000000..4cd3267
---- /dev/null
-+++ b/multipath/mpathconf.8
-@@ -0,0 +1,101 @@
-+.TH MPATHCONF 8 "June 2010" "" "Linux Administrator's Manual"
-+.SH NAME
-+mpathconf - A tool for configuring device-mapper-multipath
-+.SH SYNOPSIS
-+.B mpathconf
-+.RB [\| commands \|]
-+.RB [\| options \|]
-+.SH DESCRIPTION
-+.B mpathconf
-+is a utility that creates or modifies
-+.B /etc/multipath.conf.
-+It can enable or disable multipathing and configure some common options.
-+.B mpathconf
-+can also load the
-+.B dm_multipath
-+module, start and stop the
-+.B multipathd
-+daemon, and configure the
-+.B multipathd
-+service to start automatically or not. If
-+.B mpathconf
-+is called with no commands, it will display the current configuration.
-+
-+The default options for mpathconf are
-+.B --with_module
-+The
-+.B --with_multipathd
-+option is not set by default.  Enabling multipathing will load the
-+.B dm_multipath
-+module but it will not immediately start it. This is so
-+that users can manually edit their config file if necessary, before starting
-+.B multipathd.
-+
-+If
-+.B /etc/multipath.conf
-+already exists, mpathconf will edit it. If it does not exist, mpathconf will
-+create a default file with
-+.B user_friendly_names
-+and
-+.B find_multipaths
-+set. To disable these, use the
-+.B --user_friendly_names n
-+and
-+.B --find_multipaths n
-+options
-+.SH COMMANDS
-+.TP
-+.B --enable
-+Removes any line that blacklists all device nodes from the
-+.B /etc/multipath.conf
-+blacklist section.
-+.TP
-+.B --disable
-+Adds a line that blacklists all device nodes to the
-+.B /etc/multipath.conf
-+blacklist section. If no blacklist section exists, it will create one.
-+.TP
-+.B --user_friendly_name \fP { \fBy\fP | \fBn\fP }
-+If set to \fBy\fP, this adds the line
-+.B user_friendly_names yes
-+to the
-+.B /etc/multipath.conf
-+defaults section. If set to \fBn\fP, this removes the line, if present. This
-+command can be used along with any other command.
-+.TP
-+.B --find_multipaths\fP { \fBy\fP | \fBn\fP }
-+If set to \fBy\fP, this adds the line
-+.B find_multipaths yes
-+to the
-+.B /etc/multipath.conf
-+defaults section. If set to \fBn\fP, this removes the line, if present. This
-+command can be used aldong with any other command.
-+.SH OPTIONS
-+.TP
-+.B --with_module\fP { \fBy\fP | \fBn\fP }
-+If set to \fBy\fP, this runs
-+.B modprobe dm_multipath
-+to install the multipath modules. This option only works with the
-+.B --enable
-+command. This option is set to \fBy\fP by default.
-+.TP
-+.B --with_multipathd { \fBy\fP | \fBn\fP }
-+If set to \fBy\fP, this runs
-+.B service multipathd start
-+to start the multipathd daemon on \fB--enable\fP,
-+.B service multipathd stop
-+to stop the multipathd daemon on \fB--disable\fP, and
-+.B service multipathd reload
-+to reconfigure multipathd on \fB--user_frindly_names\fP and
-+\fB--find_multipaths\fP.
-+This option is set to \fBn\fP by default.
-+.SH FILES
-+.BR /etc/multipath.conf
-+.SH "SEE ALSO"
-+.BR multipath.conf (5),
-+.BR modprobe (8),
-+.BR multipath (8),
-+.BR multipathd (8),
-+.BR service (8),
-+.SH AUTHOR
-+Benjamin Marzinski <bmarzins@redhat.com>
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0026-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch

@@ -1,167 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Benjamin Marzinski <bmarzins@redhat.com>
-Date: Fri, 17 Oct 2014 11:20:34 -0500
-Subject: [PATCH] RH: add wwids from kernel cmdline mpath.wwids with -A
-
-This patch adds another option to multipath, "-A", which reads
-/proc/cmdline for mpath.wwid=<WWID> options, and adds any wwids it finds
-to /etc/multipath/wwids.  While this isn't usually important during
-normal operation, since these wwids should already be added, it can be
-helpful during installation, to make sure that multipath can claim
-devices as its own, before LVM or something else makes use of them.  The
-patch also execs "/sbin/multipath -A" before running multipathd in
-multipathd.service
-
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- libmultipath/wwids.c          | 44 +++++++++++++++++++++++++++++++++++++++++++
- libmultipath/wwids.h          |  1 +
- multipath/main.c              | 10 ++++++++--
- multipath/multipath.8         |  5 ++++-
- multipathd/multipathd.service |  1 +
- 5 files changed, 58 insertions(+), 3 deletions(-)
-
-diff --git a/libmultipath/wwids.c b/libmultipath/wwids.c
-index 53e7951..39e08cd 100644
---- a/libmultipath/wwids.c
-+++ b/libmultipath/wwids.c
-@@ -443,3 +443,47 @@ int op ## _wwid(const char *wwid) \
- declare_failed_wwid_op(is_failed, false)
- declare_failed_wwid_op(mark_failed, true)
- declare_failed_wwid_op(unmark_failed, true)
-+
-+int remember_cmdline_wwid(void)
-+{
-+	FILE *f = NULL;
-+	char buf[LINE_MAX], *next, *ptr;
-+	int ret = 0;
-+
-+	f = fopen("/proc/cmdline", "re");
-+	if (!f) {
-+		condlog(0, "can't open /proc/cmdline : %s", strerror(errno));
-+		return -1;
-+	}
-+
-+	if (!fgets(buf, sizeof(buf), f)) {
-+		if (ferror(f))
-+			condlog(0, "read of /proc/cmdline failed : %s",
-+				strerror(errno));
-+		else
-+			condlog(0, "couldn't read /proc/cmdline");
-+		fclose(f);
-+		return -1;
-+	}
-+	fclose(f);
-+	next = buf;
-+	while((ptr = strstr(next, "mpath.wwid="))) {
-+		ptr += 11;
-+		next = strpbrk(ptr, " \t\n");
-+		if (next) {
-+			*next = '\0';
-+			next++;
-+		}
-+		if (strlen(ptr)) {
-+			if (remember_wwid(ptr) != 0)
-+				ret = -1;
-+		}
-+		else {
-+			condlog(0, "empty mpath.wwid kernel command line option");
-+			ret = -1;
-+		}
-+		if (!next)
-+			break;
-+	}
-+	return ret;
-+}
-diff --git a/libmultipath/wwids.h b/libmultipath/wwids.h
-index 0c6ee54..e32a0b0 100644
---- a/libmultipath/wwids.h
-+++ b/libmultipath/wwids.h
-@@ -17,6 +17,7 @@ int remember_wwid(char *wwid);
- int check_wwids_file(char *wwid, int write_wwid);
- int remove_wwid(char *wwid);
- int replace_wwids(vector mp);
-+int remember_cmdline_wwid(void);
- 
- enum {
- 	WWID_IS_NOT_FAILED = 0,
-diff --git a/multipath/main.c b/multipath/main.c
-index 6fdde03..7bac232 100644
---- a/multipath/main.c
-+++ b/multipath/main.c
-@@ -109,7 +109,7 @@ usage (char * progname)
- {
- 	fprintf (stderr, VERSION_STRING);
- 	fprintf (stderr, "Usage:\n");
--	fprintf (stderr, "  %s [-a|-c|-w|-W] [-d] [-r] [-i] [-v lvl] [-p pol] [-b fil] [-q] [dev]\n", progname);
-+	fprintf (stderr, "  %s [-a|-A|-c|-w|-W] [-d] [-r] [-i] [-v lvl] [-p pol] [-b fil] [-q] [dev]\n", progname);
- 	fprintf (stderr, "  %s -l|-ll|-f [-v lvl] [-b fil] [-R num] [dev]\n", progname);
- 	fprintf (stderr, "  %s -F [-v lvl] [-R num]\n", progname);
- 	fprintf (stderr, "  %s -t\n", progname);
-@@ -123,6 +123,8 @@ usage (char * progname)
- 		"  -f      flush a multipath device map\n"
- 		"  -F      flush all multipath device maps\n"
- 		"  -a      add a device wwid to the wwids file\n"
-+		"  -A      add devices from kernel command line mpath.wwids\n"
-+		"          parameters to wwids file\n"
- 		"  -c      check if a device should be a path in a multipath device\n"
- 		"  -C      check if a multipath device has usable paths\n"
- 		"  -q      allow queue_if_no_path when multipathd is not running\n"
-@@ -907,7 +909,7 @@ main (int argc, char *argv[])
- 		exit(1);
- 	multipath_conf = conf;
- 	conf->retrigger_tries = 0;
--	while ((arg = getopt(argc, argv, ":adcChl::FfM:v:p:b:BrR:itquUwW")) != EOF ) {
-+	while ((arg = getopt(argc, argv, ":aAdcChl::FfM:v:p:b:BrR:itquUwW")) != EOF ) {
- 		switch(arg) {
- 		case 1: printf("optarg : %s\n",optarg);
- 			break;
-@@ -974,6 +976,10 @@ main (int argc, char *argv[])
- 		case 't':
- 			r = dump_config(conf);
- 			goto out_free_config;
-+		case 'A':
-+			if (remember_cmdline_wwid() != 0)
-+				exit(1);
-+			exit(0);
- 		case 'h':
- 			usage(argv[0]);
- 			exit(0);
-diff --git a/multipath/multipath.8 b/multipath/multipath.8
-index 914a8cb..8c6a4c1 100644
---- a/multipath/multipath.8
-+++ b/multipath/multipath.8
-@@ -25,7 +25,7 @@ multipath \- Device mapper target autoconfig.
- .RB [\| \-b\ \c
- .IR bindings_file \|]
- .RB [\| \-d \|]
--.RB [\| \-h | \-l | \-ll | \-f | \-t | \-F | \-B | \-c | \-C | \-q | \-r | \-i | \-a | \-u | \-U | \-w | \-W \|]
-+.RB [\| \-h | \-l | \-ll | \-f | \-t | \-F | \-B | \-c | \-C | \-q | \-r | \-i | \-a | \-A | \-u | \-U | \-w | \-W \|]
- .RB [\| \-p\ \c
- .IR failover | multibus | group_by_serial | group_by_prio | group_by_node_name \|]
- .RB [\| \-R\ \c
-@@ -135,6 +135,9 @@ Add the WWID for the specified device to the WWIDs file.
- Check if the device specified in the program environment should be
- a path in a multipath device.
- .
-+.B \-A
-+add wwids from any kernel command line mpath.wwid parameters to the wwids file
-+.
- .TP
- .B \-U
- Check if the device specified in the program environment is a multipath device
-diff --git a/multipathd/multipathd.service b/multipathd/multipathd.service
-index 17434ce..0fbcc46 100644
---- a/multipathd/multipathd.service
-+++ b/multipathd/multipathd.service
-@@ -15,6 +15,7 @@ Type=notify
- NotifyAccess=main
- LimitCORE=infinity
- ExecStartPre=-/sbin/modprobe -a scsi_dh_alua scsi_dh_emc scsi_dh_rdac dm-multipath
-+ExecStartPre=-/sbin/multipath -A
- ExecStart=/sbin/multipathd -d -s
- ExecReload=/sbin/multipathd reconfigure
- TasksMax=infinity
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0027-RH-warn-on-invalid-regex-instead-of-failing.patch

@@ -1,121 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Benjamin Marzinski <bmarzins@redhat.com>
-Date: Mon, 6 Nov 2017 21:39:28 -0600
-Subject: [PATCH] RH: warn on invalid regex instead of failing
-
-multipath.conf used to allow "*" as a match everything regular expression,
-instead of requiring ".*". Instead of erroring when the old style
-regular expressions are used, it should print a warning and convert
-them.
-
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- libmultipath/dict.c   | 27 +++++++++++++++++++++------
- libmultipath/parser.c | 13 +++++++++++++
- libmultipath/parser.h |  1 +
- 3 files changed, 35 insertions(+), 6 deletions(-)
-
-diff --git a/libmultipath/dict.c b/libmultipath/dict.c
-index 7ad0f5a..ab808d6 100644
---- a/libmultipath/dict.c
-+++ b/libmultipath/dict.c
-@@ -55,6 +55,21 @@ set_str(vector strvec, void *ptr)
- }
- 
- static int
-+set_regex(vector strvec, void *ptr)
-+{
-+	char **str_ptr = (char **)ptr;
-+
-+	if (*str_ptr)
-+		FREE(*str_ptr);
-+	*str_ptr = set_regex_value(strvec);
-+
-+	if (!*str_ptr)
-+		return 1;
-+
-+	return 0;
-+}
-+
-+static int
- set_yes_no(vector strvec, void *ptr)
- {
- 	char * buff;
-@@ -1271,7 +1286,7 @@ ble_ ## option ## _handler (struct config *conf, vector strvec)		\
- 	if (!conf->option)						\
- 		return 1;						\
- 									\
--	buff = set_value(strvec);					\
-+	buff = set_regex_value(strvec);					\
- 	if (!buff)							\
- 		return 1;						\
- 									\
-@@ -1287,7 +1302,7 @@ ble_ ## option ## _ ## name ## _handler (struct config *conf, vector strvec) \
- 	if (!conf->option)						\
- 		return 1;						\
- 									\
--	buff = set_value(strvec);					\
-+	buff = set_regex_value(strvec);					\
- 	if (!buff)							\
- 		return 1;						\
- 									\
-@@ -1388,16 +1403,16 @@ device_handler(struct config *conf, vector strvec)
- 	return 0;
- }
- 
--declare_hw_handler(vendor, set_str)
-+declare_hw_handler(vendor, set_regex)
- declare_hw_snprint(vendor, print_str)
- 
--declare_hw_handler(product, set_str)
-+declare_hw_handler(product, set_regex)
- declare_hw_snprint(product, print_str)
- 
--declare_hw_handler(revision, set_str)
-+declare_hw_handler(revision, set_regex)
- declare_hw_snprint(revision, print_str)
- 
--declare_hw_handler(bl_product, set_str)
-+declare_hw_handler(bl_product, set_regex)
- declare_hw_snprint(bl_product, print_str)
- 
- declare_hw_handler(hwhandler, set_str)
-diff --git a/libmultipath/parser.c b/libmultipath/parser.c
-index b8b7e0d..34b4ad2 100644
---- a/libmultipath/parser.c
-+++ b/libmultipath/parser.c
-@@ -380,6 +380,19 @@ set_value(vector strvec)
- 	return alloc;
- }
- 
-+void *
-+set_regex_value(vector strvec)
-+{
-+	char *buff = set_value(strvec);
-+
-+	if (buff && strcmp("*", buff) == 0) {
-+		condlog(0, "Invalid regular expression \"*\" in multipath.conf. Using \".*\"");
-+		FREE(buff);
-+		return strdup(".*");
-+	}
-+	return buff;
-+}
-+
- /* non-recursive configuration stream handler */
- static int kw_level = 0;
- 
-diff --git a/libmultipath/parser.h b/libmultipath/parser.h
-index 62906e9..b791705 100644
---- a/libmultipath/parser.h
-+++ b/libmultipath/parser.h
-@@ -77,6 +77,7 @@ extern void dump_keywords(vector keydump, int level);
- extern void free_keywords(vector keywords);
- extern vector alloc_strvec(char *string);
- extern void *set_value(vector strvec);
-+extern void *set_regex_value(vector strvec);
- extern int process_file(struct config *conf, char *conf_file);
- extern struct keyword * find_keyword(vector keywords, vector v, char * name);
- int snprint_keyword(char *buff, int len, char *fmt, struct keyword *kw,
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0028-RH-reset-default-find_mutipaths-value-to-off.patch

@@ -1,29 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Benjamin Marzinski <bmarzins@redhat.com>
-Date: Thu, 7 Jun 2018 17:43:52 -0500
-Subject: [PATCH] RH: reset default find_mutipaths value to off
-
-Upstream has changed to default find_multipaths to "strict". For now
-Redhat will retain the previous default of "off".
-
-Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
----
- libmultipath/defaults.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/libmultipath/defaults.h b/libmultipath/defaults.h
-index f076b4b..70ba98a 100644
---- a/libmultipath/defaults.h
-+++ b/libmultipath/defaults.h
-@@ -17,7 +17,7 @@
- #define DEFAULT_NO_PATH_RETRY	NO_PATH_RETRY_UNDEF
- #define DEFAULT_VERBOSITY	2
- #define DEFAULT_REASSIGN_MAPS	0
--#define DEFAULT_FIND_MULTIPATHS	FIND_MULTIPATHS_STRICT
-+#define DEFAULT_FIND_MULTIPATHS	FIND_MULTIPATHS_OFF
- #define DEFAULT_FAST_IO_FAIL	5
- #define DEFAULT_DEV_LOSS_TMO	600
- #define DEFAULT_RETAIN_HWHANDLER RETAIN_HWHANDLER_ON
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0029-multipath-tools-modify-Makefile.inc-for-cross-compil.patch

@@ -1,49 +0,0 @@
-From 8bdd4481d822b6625d8bf719431ca74ed1b5e021 Mon Sep 17 00:00:00 2001
-From: Changqing Li <changqing.li@windriver.com>
-Date: Mon, 16 Jul 2018 15:56:37 +0800
-Subject: [PATCH] multipath-tools: modify Makefile.inc for cross-compilation
-
-Do not look for systemd info on the host, and allow us to pass in CFLAGS
-using the OPTFLAGS variable.
-
-Upstream-Status: Inappropriate [embedded specific]
-
-Signed-off-by: Joe Slater <joe.slater@windriver.com>
-
-Update for version 0.5.0-144-g770e6d0
-
-Signed-off-by: Kai Kang <kai.kang@windriver.com>
-
-Update for version 0.7.1
-
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
-
-update for version 0.7.7
-
-remove change about CFLAGS part, since patch 0024 already have similar function.
-
-Signed-off-by: Changqing Li <changqing.li@windriver.com>
----
- Makefile.inc | 8 ++------
- 1 file changed, 2 insertions(+), 6 deletions(-)
-
-diff --git a/Makefile.inc b/Makefile.inc
-index 57a1835..0c403c7 100644
---- a/Makefile.inc
-+++ b/Makefile.inc
-@@ -38,12 +38,6 @@ ifndef RUN
- 	endif
- endif
- 
--ifndef SYSTEMD
--	ifeq ($(shell systemctl --version > /dev/null 2>&1 && echo 1), 1)
--		SYSTEMD = $(shell systemctl --version 2> /dev/null |  sed -n 's/systemd \([0-9]*\)/\1/p')
--	endif
--endif
--
- ifndef SYSTEMDPATH
- 	SYSTEMDPATH=usr/lib
- endif
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0030-Always-use-devmapper.patch

@@ -1,57 +0,0 @@
-From d929a1ea5e42ecbe30c990644ed4ada2817c6439 Mon Sep 17 00:00:00 2001
-From: Changqing Li <changqing.li@windriver.com>
-Date: Mon, 16 Jul 2018 16:00:14 +0800
-Subject: [PATCH]  Always use devmapper
-
-Do not try to compute several _API_ make variables
-from host information when cross-compiling.
-
-Upstream-Status: Inappropriate [embedded specific]
-
-Signed-off-by: Aws Ismail <aws.ismail@windriver.com>
-Signed-off-by: Joe Slater <joe.slater@windriver.com>
-
-Rebase to 0.7.1
-
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
-
-Rebase to 0.7.7
-
-Signed-off-by: Changqing Li <changqing.li@windriver.com>
----
- libmultipath/Makefile | 19 ++++---------------
- 1 file changed, 4 insertions(+), 15 deletions(-)
-
-diff --git a/libmultipath/Makefile b/libmultipath/Makefile
-index f51786d..3ad9c48 100644
---- a/libmultipath/Makefile
-+++ b/libmultipath/Makefile
-@@ -20,21 +20,10 @@ ifdef SYSTEMD
- 	endif
- endif
- 
--ifneq ($(call check_func,dm_task_no_flush,/usr/include/libdevmapper.h),0)
--	CFLAGS += -DLIBDM_API_FLUSH -D_GNU_SOURCE
--endif
--
--ifneq ($(call check_func,dm_task_set_cookie,/usr/include/libdevmapper.h),0)
--	CFLAGS += -DLIBDM_API_COOKIE
--endif
--
--ifneq ($(call check_func,udev_monitor_set_receive_buffer_size,/usr/include/libudev.h),0)
--	CFLAGS += -DLIBUDEV_API_RECVBUF
--endif
--
--ifneq ($(call check_func,dm_task_deferred_remove,/usr/include/libdevmapper.h),0)
--	CFLAGS += -DLIBDM_API_DEFERRED
--endif
-+CFLAGS += -DLIBDM_API_FLUSH -D_GNU_SOURCE
-+CFLAGS += -DLIBDM_API_COOKIE
-+CFLAGS += -DLIBUDEV_API_RECVBUF
-+CFLAGS += -DLIBDM_API_DEFERRED
- 
- OBJS = memory.o parser.o vector.o devmapper.o callout.o \
- 	hwtable.o blacklist.o util.o dmparser.o config.o \
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/0031-Always-use-devmapper-for-kpartx.patch

@@ -1,40 +0,0 @@
-From 145f2b829e5362cda975bebafd7fe4d00ff56d1c Mon Sep 17 00:00:00 2001
-From: Changqing Li <changqing.li@windriver.com>
-Date: Mon, 16 Jul 2018 16:02:07 +0800
-Subject: [PATCH] Always use devmapper for kpartx
-
-Do not try to compute the LIBDM_API_COOKIE make variable
-from host information when cross-compiling.
-
-Upstream-Status: Inappropriate [embedded specific]
-
-Signed-off-by: Aws Ismail <aws.ismail@windriver.com>
-Signed-off-by: Joe Slater <joe.slater@windriver.com>
-
-Rebase to 0.7.1
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
-
-Rebase to 0.7.7
-Signed-off-by: Changqing Li <changqing.li@windriver.com>
----
- kpartx/Makefile | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
-diff --git a/kpartx/Makefile b/kpartx/Makefile
-index 7eb467e..c143321 100644
---- a/kpartx/Makefile
-+++ b/kpartx/Makefile
-@@ -8,9 +8,7 @@ LDFLAGS += $(BIN_LDFLAGS)
- 
- LIBDEPS += -ldevmapper
- 
--ifneq ($(call check_func,dm_task_set_cookie,/usr/include/libdevmapper.h),0)
--	CFLAGS += -DLIBDM_API_COOKIE
--endif
-+CFLAGS += -DLIBDM_API_COOKIE
- 
- OBJS = bsd.o dos.o kpartx.o solaris.o unixware.o dasd.o sun.o \
- 	gpt.o mac.o ps3.o crc32.o lopart.o xstrncpy.o devmapper.o
--- 
-2.7.4
-

meta-citadel/recipes-support/multipath-tools/files/multipath.conf.example

@@ -1,90 +0,0 @@
-# This is a basic configuration file with some examples, for device mapper
-# multipath.
-# For a complete list of the default configuration values, see
-# /usr/share/doc/device-mapper-multipath-0.4.9/multipath.conf.defaults
-# For a list of configuration options with descriptions, see
-# /usr/share/doc/device-mapper-multipath-0.4.9/multipath.conf.annotated
-
-## By default, devices with vendor = "IBM" and product = "S/390.*" are
-## blacklisted. To enable mulitpathing on these devies, uncomment the
-## following lines.
-#blacklist_exceptions {
-#	device {
-#		vendor	"IBM"
-#		product	"S/390.*"
-#	}
-#}
-
-## Use user friendly names, instead of using WWIDs as names.
-defaults {
-	user_friendly_names yes
-}
-##
-## Here is an example of how to configure some standard options.
-##
-#
-#defaults {
-#	udev_dir		/dev
-#	polling_interval 	10
-#	selector		"round-robin 0"
-#	path_grouping_policy	multibus
-#	getuid_callout		"/lib/udev/scsi_id --whitelisted --device=/dev/%n"
-#	prio			alua
-#	path_checker		readsector0
-#	rr_min_io		100
-#	max_fds			8192
-#	rr_weight		priorities
-#	failback		immediate
-#	no_path_retry		fail
-#	user_friendly_names	yes
-#}
-##
-## The wwid line in the following blacklist section is shown as an example
-## of how to blacklist devices by wwid.  The 2 devnode lines are the
-## compiled in default blacklist. If you want to blacklist entire types
-## of devices, such as all scsi devices, you should use a devnode line.
-## However, if you want to blacklist specific devices, you should use
-## a wwid line.  Since there is no guarantee that a specific device will
-## not change names on reboot (from /dev/sda to /dev/sdb for example)
-## devnode lines are not recommended for blacklisting specific devices.
-##
-#blacklist {
-#       wwid 26353900f02796769
-#	devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"
-#	devnode "^hd[a-z]"
-#}
-#multipaths {
-#	multipath {
-#		wwid			3600508b4000156d700012000000b0000
-#		alias			yellow
-#		path_grouping_policy	multibus
-#		path_checker		readsector0
-#		path_selector		"round-robin 0"
-#		failback		manual
-#		rr_weight		priorities
-#		no_path_retry		5
-#	}
-#	multipath {
-#		wwid			1DEC_____321816758474
-#		alias			red
-#	}
-#}
-#devices {
-#	device {
-#		vendor			"COMPAQ  "
-#		product			"HSV110 (C)COMPAQ"
-#		path_grouping_policy	multibus
-#		getuid_callout          "/lib/udev/scsi_id --whitelisted --device=/dev/%n"
-#		path_checker		readsector0
-#		path_selector		"round-robin 0"
-#		hardware_handler	"0"
-#		failback		15
-#		rr_weight		priorities
-#		no_path_retry		queue
-#	}
-#	device {
-#		vendor			"COMPAQ  "
-#		product			"MSA1000         "
-#		path_grouping_policy	multibus
-#	}
-#}

meta-citadel/recipes-support/multipath-tools/files/multipathd.oe

@@ -1,146 +0,0 @@
-#!/bin/bash
-#
-# multipathd	Starts the multipath daemon
-#
-# chkconfig: - 06 87
-# description: Manages device-mapper multipath devices
-
-### BEGIN INIT INFO
-# Provides: multipathd
-# Required-Start:
-# Required-Stop:
-# Default-Start:
-# Default-Stop:
-# Short-Description: Control multipathd
-# Description: This service monitors and manages
-#              device-mapper multipath devices
-### END INIT INFO
-
-DAEMON=/sbin/multipathd
-prog=`basename $DAEMON`
-initdir=/etc/init.d
-lockdir=/var/lock/subsys
-sysconfig=/etc/sysconfig
-syspath=/sys/block
-
-RETVAL=0
-
-teardown_slaves()
-{
-pushd $1 > /dev/null
-if [ -d "slaves" ]; then
-for slave in slaves/*;
-do
-	if [ "$slave" = "slaves/*" ]; then
-		read dev <  $1/dev
-		tablename=`dmsetup table --target multipath | sed -n "s/\(.*\): .* $dev .*/\1/p"`
-		if ! [ -z $tablename ]; then
-			echo "Root is on a multipathed device, multipathd can not be stopped"
-			exit 1
-		fi
-	else
-		local_slave=`readlink -f $slave`;
-		teardown_slaves $local_slave;
-	fi
-	done
-
-else
-		read dev <  $1/dev
-		tablename=`dmsetup table --target multipath | sed -n "s/\(.*\): .* $dev .*/\1/p"`
-		if ! [ -z $tablename ]; then
-			echo "Root is on a multipathed device, multipathd can not be stopped"
-			exit 1
-		fi
-fi
-popd > /dev/null
-}
-
-#
-# See how we were called.
-#
-
-start() {
-	test -x $DAEMON || exit 5
-	echo -n $"Starting $prog daemon: "
-	start-stop-daemon --start --quiet --exec $DAEMON
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && touch $lockdir/$prog
-	echo
-}
-
-force_stop() {
-	echo -n $"Stopping $prog daemon: "
-	killall $DAEMON
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && rm -f $lockdir/$prog
-	echo
-}
-
-stop() {
-        root_dev=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $1; }}' /etc/mtab)
-	dm_num=`dmsetup info -c --noheadings -o minor $root_dev 2> /dev/null`
-	if [ $? -eq 0 ]; then
-		root_dm_device="dm-$dm_num"
-		[ -d $syspath/$root_dm_device ] && teardown_slaves $syspath/$root_dm_device
-	fi
-
-	force_stop
-}
-
-restart() {
-	stop
-	start
-}
-
-force_restart() {
-	force_stop
-	start
-}
-
-reload() {
-	echo -n "Reloading $prog: "
-	trap "" SIGHUP
-	killall $DAEMON -s SIGHUP -v
-	RETVAL=$?
-	echo
-}	
-
-case "$1" in
-start)
-	start
-	;;
-stop)
-	stop
-	;;
-force-stop)
-	force_stop
-	;;
-force-reload|reload)
-	reload
-	;;
-restart)
-	restart
-	;;
-force-restart)
-	force_restart
-	;;
-condrestart|try-restart)
-	if [ -f $lockdir/$prog ]; then
-	    restart
-	fi
-	;;
-status)
-    if pidof -o %PPID $DAEMON > /dev/null; then
-        echo "Running"
-        RETVAL=0
-    else
-        echo "Not running"
-        RETVAL=1
-    fi
-	;;
-*)
-	echo $"Usage: $0 {start|stop|force-stop|status|restart|force-restart|condrestart|reload}"
-	RETVAL=2
-esac
-
-exit $RETVAL

meta-citadel/recipes-support/multipath-tools/multipath-tools_0.7.7.bb

@@ -1,131 +0,0 @@
-SUMMARY = "The upstream project used to drive the Device Mapper multipathing driver"
-
-DESCRIPTION = "It provides tools to manage multipath devices \
-by instructing the device-mapper kernel module what to do. These \
-tools include: \
-1. multipath - Scan the system for multipath devices and assemble them.\
-2. multipathd - Detects when paths fail and execs multipath to update \
-things.\
-3. mpathpersist - Persistent reservation management feature allows \
-cluster management software to manage persistent reservation through \
-mpath device. It processes management requests from callers and hides \
-the management task details. It also handles persistent reservation \
-management of data path life cycle and state changes.\
-4. kpartx - This tool, derived from util-linux's partx, reads partition \
-tables on specified device and create device maps over partitions \
-segments detected. It is called from hotplug upon device maps creation \
-and deletion"
-
-HOMEPAGE = "http://christophe.varoqui.free.fr/"
-
-DEPENDS = "libdevmapper \
-           libaio \
-           liburcu \
-           readline \
-           udev \
-           json-c \
-          "
-
-LICENSE = "GPLv2"
-
-SRC_URI = "git://git.opensvc.com/multipath-tools/.git;protocol=http \
-           file://multipathd.oe \
-           file://multipath.conf.example \
-           file://0001-multipath-tools-add-RDAC-SUN-ArrayStorage-to-hwtable.patch \
-           file://0002-multipath-tools-remove-c-from-__cpluscplus-misspelle.patch \
-           file://0003-multipath-tools-remove-emacs-autoconfig-of-kpartx-gp.patch \
-           file://0004-multipath-tools-replace-FSF-address-with-a-www-point.patch \
-           file://0005-multipath-tools-Remove-trailing-leading-whitespaces-.patch \
-           file://0006-multipath-tools-fix-compilation-with-musl-libc.patch \
-           file://0007-multipath-tools-add-x-to-doc-preclean.pl-and-split-m.patch \
-           file://0008-multipath-tools-refresh-kernel-doc-from-kernel-sourc.patch \
-           file://0009-multipath-tools-configure-hitachi-ams2000-and-hus100.patch \
-           file://0010-libmultipath-don-t-reject-maps-with-undefined-prio.patch \
-           file://0011-multipathd-handle-errors-in-uxlsnr-as-fatal.patch \
-           file://0012-libmultipath-fix-error-parsing-find_multipaths-stric.patch \
-           file://0013-libmultipath-print-correct-default-for-delay_-_check.patch \
-           file://0014-multipath.conf.5-clarify-property-whitelist-handling.patch \
-           file://0015-mpathpersist-add-all_tg_pt-option.patch \
-           file://0016-libmultipath-remove-rbd-code.patch \
-           file://0017-mpathpersist-fix-aptpl-support.patch \
-           file://0018-multipath-don-t-check-timestamps-without-a-path.patch \
-           file://0019-libmultipath-fix-detect-alua-corner-case.patch \
-           file://0020-multipath-fix-setting-conf-version.patch \
-           file://0021-RH-fixup-udev-rules-for-redhat.patch \
-           file://0022-RH-Remove-the-property-blacklist-exception-builtin.patch \
-           file://0023-RH-don-t-start-without-a-config-file.patch \
-           file://0024-RH-use-rpm-optflags-if-present.patch \
-           file://0025-RH-add-mpathconf.patch \
-           file://0026-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch \
-           file://0027-RH-warn-on-invalid-regex-instead-of-failing.patch \
-           file://0028-RH-reset-default-find_mutipaths-value-to-off.patch \
-           file://0029-multipath-tools-modify-Makefile.inc-for-cross-compil.patch \
-           file://0030-Always-use-devmapper.patch \
-           file://0031-Always-use-devmapper-for-kpartx.patch \
-           "
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=5f30f0716dfdd0d91eb439ebec522ec2"
-
-SRCREV = "386d288b5595fc2c01dffe698b6eb306c6674908"
-
-S = "${WORKDIR}/git"
-
-inherit systemd pkgconfig
-
-SYSTEMD_SERVICE_${PN} = "multipathd.service"
-SYSTEMD_AUTO_ENABLE = "disable"
-
-TARGET_CC_ARCH += "${LDFLAGS}"
-
-# multipath-tools includes a copy of the valgrind.h header
-# file and uses the macros to suppress some false positives. However,
-# that only works on ARM when thumb is disabled. Otherwise one gets:
-#   Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `mov r12,r12,ror#3'
-#   ../Makefile.inc:66: recipe for target 'debug.o' failed
-ARM_INSTRUCTION_SET_armv4 = "arm"
-ARM_INSTRUCTION_SET_armv5 = "arm"
-
-# The exact version of SYSTEMD does not matter but should be greater than 209.
-#
-EXTRA_OEMAKE = 'MULTIPATH_VERSION=${PV} DESTDIR=${D} syslibdir=${base_libdir} \
-                OPTFLAGS="${CFLAGS}" \
-                bindir=${base_sbindir} \
-                LIB=${base_libdir} libdir=${base_libdir}/multipath \
-                unitdir=${systemd_system_unitdir} \
-                ${@bb.utils.contains("DISTRO_FEATURES", "systemd", "SYSTEMD=216", "", d)} \
-               '
-
-do_install() {
-    oe_runmake install
-
-    # We copy an initscript, but do not start multipathd at init time.
-    #
-    if ${@bb.utils.contains('DISTRO_FEATURES','sysvinit','true','false',d)};then
-        install -d ${D}${sysconfdir}/init.d
-        cp ${WORKDIR}/multipathd.oe ${D}${sysconfdir}/init.d/multipathd
-    fi
-
-    install -d ${D}${sysconfdir}
-    install -m 0644 ${WORKDIR}/multipath.conf.example \
-    ${D}${sysconfdir}/multipath.conf.example
-}
-
-FILES_${PN}-dbg += "${base_libdir}/multipath/.debug"
-
-PACKAGES =+ "${PN}-libs"
-FILES_${PN}-libs = "${base_libdir}/lib*.so.* \
-                    ${base_libdir}/multipath/lib*.so*"
-RDEPENDS_${PN} += "${PN}-libs bash"
-
-PROVIDES += "device-mapper-multipath"
-RPROVIDES_${PN} += "device-mapper-multipath"
-RPROVIDES_${PN}-libs += "device-mapper-multipath-libs"
-
-FILES_${PN}-dev += "${base_libdir}/pkgconfig"
-
-PACKAGES =+ "kpartx"
-FILES_kpartx = "${base_sbindir}/kpartx \
-                ${nonarch_libdir}/udev/kpartx_id \
-               "
-
-RDEPENDS_${PN} += "bash kpartx"

meta-citadel/recipes-support/setcolors/setcolors/0001-Fix-CC-in-makefile.patch

@@ -1,25 +0,0 @@
-From f1b77e89867d2856bdfe38ca34771e27c2c1d26a Mon Sep 17 00:00:00 2001
-From: brl <bruce@subgraph.com>
-Date: Fri, 8 Dec 2017 22:31:23 -0500
-Subject: [PATCH] Fix CC in makefile
-
----
- Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/Makefile b/Makefile
-index 7a9cc3e..1f5f278 100644
---- a/Makefile
-+++ b/Makefile
-@@ -1,7 +1,7 @@
- PREFIX=/usr/local
- 
- setcolors: setcolors.c
--	gcc -Wall setcolors.c -o setcolors
-+	$(CC) $(CFLAGS) $(LDFLAGS) -Wall setcolors.c -o setcolors
- 
- install: setcolors setcolors.1
- 	install -Dm 755 setcolors "${DESTDIR}${PREFIX}/bin/setcolors"
--- 
-2.14.3
-

meta-citadel/recipes-support/setcolors/setcolors_1.0.0.bb

@@ -1,25 +0,0 @@
-LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://LICENSE;md5=c9aca5676b62f802a1f83ad9be3359d4"
-
-SRC_URI = "https://github.com/EvanPurkhiser/linux-vt-setcolors/archive/v${PV}.tar.gz \
-           file://0001-Fix-CC-in-makefile.patch \
-           "
-SRC_URI[md5sum] = "789b4dc02d1c4f509b3b01450c7ef980"
-SRC_URI[sha256sum] = "ccad9aac5732faab749e8f6f6b40746ce44afec5633374aa77c8e3ac2a8eef42"
-
-S = "${WORKDIR}/linux-vt-${PN}-${PV}"
-do_configure () {
-	:
-}
-
-EXTRA_OEMAKE = "PREFIX=/usr"
-do_compile () {
-	oe_runmake
-}
-
-do_install () {
-    install -Dm 755 setcolors ${D}/${bindir}/setcolors
-    install -d ${D}/${datadir}/setcolors
-    cp -R --no-preserve=ownership example-colors/ ${D}/${datadir}/setcolors
-}
-

meta-citadel/recipes-support/tree/tree_1.7.0.bb

@@ -1,21 +0,0 @@
-SUMMARY = "A recursive directory listing command"
-HOMEPAGE = "http://mama.indstate.edu/users/ice/tree/"
-SECTION = "console/utils"
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://LICENSE;md5=393a5ca445f6965873eca0259a17f833"
-
-SRC_URI = "ftp://mama.indstate.edu/linux/${BPN}/${BP}.tgz"
-SRC_URI[md5sum] = "abe3e03e469c542d8e157cdd93f4d8a6"
-SRC_URI[sha256sum] = "6957c20e82561ac4231638996e74f4cfa4e6faabc5a2f511f0b4e3940e8f7b12"
-
-# tree's default CFLAGS for Linux
-CFLAGS += "-Wall -DLINUX -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64"
-
-EXTRA_OEMAKE = "CC='${CC}' CFLAGS='${CFLAGS}' LDFLAGS='${LDFLAGS}'"
-
-do_configure[noexec] = "1"
-
-do_install() {
-    install -d ${D}${bindir}
-    install -m 0755 ${S}/${BPN} ${D}${bindir}/
-}